- 26 Sep, 2022 40 commits
-
-
Christophe Leroy authored
PPC_E500 is the same as PPC_85xx || PPC_BOOKE_64 Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/af79696f8cb8536fb4e20c0d98a6bf159a9e371b.1663606876.git.christophe.leroy@csgroup.eu
-
Christophe Leroy authored
CONFIG_PPC_BOOK3E_MMU is redundant with CONFIG_PPC_E500. Remove it. Also rename mmu-book3e.h to mmu-e500.h Signed-off-by:
-
Christophe Leroy authored
CONFIG_PPC_FSL_BOOK3E is redundant with CONFIG_PPC_E500. Remove it. And rename five files accordingly. Signed-off-by:
-
Christophe Leroy authored
CONFIG_PPC_FSL_BOOK3E is redundant with CONFIG_PPC_E500. Replace it so that CONFIG_PPC_FSL_BOOK3E can be removed later. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Christophe Leroy authored
CONFIG_PPC_FSL_BOOK3E is redundant with CONFIG_PPC_E500. Rename it so that CONFIG_PPC_FSL_BOOK3E can be removed later. Signed-off-by:
-
Christophe Leroy authored
It will be used outside arch/powerpc, make it clear its a powerpc configuration item. And we already have CONFIG_PPC_E500MC, so that will make it more consistent. Signed-off-by:
-
Christophe Leroy authored
PPC_85xx and PPC_BOOK3E_64 already select E500 so no need to select it again by PPC_QEMU_E500 and CORENET_GENERIC as they depend on PPC_85xx || PPC_BOOK3E_64. PPC_BOOK3E_64 already selects E500MC so no need to select it again by PPC_QEMU_E500 if PPC64, PPC_BOOK3E_64 is the only way into PPC_QEMU_E500 with PPC64. Signed-off-by:
-
Christophe Leroy authored
CONFIG_PPC_BOOK3E is redundant with CONFIG_PPC_BOOK3E_64. The later is more explicit about the fact that it's a 64 bits target. Remove CONFIG_PPC_BOOK3E. Signed-off-by:
-
Christophe Leroy authored
e500v1/v2 and e500mc are said to be mutually exclusive in Kconfig. Split e500 cpu_specs[] and then restrict the non e500mc to PPC32 which is then 85xx. Signed-off-by:
-
Christophe Leroy authored
PPC_85xx is PPC32 only. PPC_85xx always selects E500 and is the only PPC32 that selects E500. FSL_BOOKE is selected when E500 and PPC32 are selected. So FSL_BOOKE is redundant with PPC_85xx. Remove FSL_BOOKE. And rename four files accordingly. cpu_setup_fsl_booke.S is not renamed because it is linked to PPC_FSL_BOOK3E and not to FSL_BOOKE as suggested by its name. Signed-off-by:
-
Christophe Leroy authored
cpu_specs[] is full of #ifdefs depending on the different types of CPU. CPUs are mutually exclusive, it is therefore possible to split cpu_specs[] into smaller more readable pieces. Create cpu_specs_XXX.h that will each be dedicated on one of the following mutually exclusive families: - 40x - 44x - 47x - 8xx - e500 - book3s/32 - book3s/64 In book3s/32, the block for 603 has been moved in front in order to not have two 604 blocks. Signed-off-by:
-
Christophe Leroy authored
Move all prototypes out of cputable.h For that rename cpu_setup_power.h to cpu_setup.h and move all prototypes in it. Signed-off-by:
-
Christophe Leroy authored
__machine_check_early_realmode_p{7/8/9} are already in mce.h which is included. Remove them from cputable.c Signed-off-by: -
Christophe Leroy authored
CONFIG_PPC_BOOK3E_64 implies CONFIG_PPC_FSL_BOOK3E so no need of additional #ifdefs in files built exclusively for CONFIG_PPC_BOOK3E_64. Signed-off-by:
-
Christophe Leroy authored
The only 64-bit Book3E CPUs we support require the selection of CONFIG_PPC_E500MC. However our Kconfig allows configurating a kernel that has 64-bit Book3E support, but without CONFIG_PPC_E500MC enabled. Such a kernel would never boot, it doesn't know about any CPUs. To fix this, force CONFIG_PPC_E500MC to be selected whenever we are building a 64-bit Book3E kernel. And add a test to detect future situations where cpu_specs is empty. Signed-off-by:
-
Christophe Leroy authored
CONFIG_PPC_FSL_BOOKE doesn't exist. Should be CONFIG_FSL_BOOKE. Fixes: 49e3d8ea ("powerpc/fsl_booke: Enable STRICT_KERNEL_RWX") Cc: stable@vger.kernel.org Signed-off-by:
-
Pali Rohár authored
DSA cpu port node has to be marked with "cpu" label. So fix it for both cpu port nodes. Fixes: 54c15ec3 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers") Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
-
Pali Rohár authored
Partition partition@20000 contains generic kernel image and it does not have to be used only for rescue purposes. Partition partition@1c0000 contains bootable rescue system and partition partition@340000 contains factory image/data for restoring to NAND. So change partition labels to better fit their purpose by removing possible misleading substring "rootfs" from these labels. Fixes: 54c15ec3 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers") Signed-off-by:
-
Michael Ellerman authored
Currently powerpc selects HAVE_EFFICIENT_UNALIGNED_ACCESS in all cases but one. The exception is if the kernel is being built little endian and explicitly targeted for Power7. The combination of Power7 and little endian was never commercially supported, or widely used. It was only ever possible on bare metal machines, using unofficial firmware, or in qemu guests hosted on those machines. The bare metal firmware support for Power7 was removed in 2019, see skiboot commit 16b7ae64 ("Remove POWER7 and POWER7+ support"). Little endian kernel builds were switched to target Power8 or later in 2018, in commit a73657ea ("powerpc/64: Add GENERIC_CPU support for little endian"). Since then it's only been possible to boot a Power7/LE kernel by explicitly building for Power7. So drop the exception and always select HAVE_EFFICIENT_UNALIGNED_ACCESS. If anyone does still have a Power7/LE machine it should hopefully continue to boot, just with some performance penality, and if not they can report a bug. Signed-off-by: -
Christophe Leroy authored
In addition to checking whether a page is reserved before allocating it to highmem, verify that it is valid memory. Otherwise the kernel Oopses as below: mem auto-init: stack:off, heap alloc:off, heap free:off Kernel attempted to read user page (7df58) - exploit attempt? (uid: 0) BUG: Unable to handle kernel data access on read at 0x0007df58 Faulting instruction address: 0xc01c8348 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=2 P2020RDB-PC Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc2-0caacb197b677410bdac81bc34f05235+ #121 NIP: c01c8348 LR: c01cb2bc CTR: 0000000a REGS: c10d7e20 TRAP: 0300 Not tainted (6.0.0-rc2-0caacb197b677410bdac81bc34f05235+) MSR: 00021000 <CE,ME> CR: 48044224 XER: 00000000 DEAR: 0007df58 ESR: 00000000 GPR00: c01cb294 c10d7f10 c1045340 00000001 00000004 c112bcc0 00000015 eedf1000 GPR08: 00000003 0007df58 00000000 f0000000 28044228 00000200 00000000 00000000 GPR16: 00000000 00000000 00000000 0275cb7a c0000000 00000001 0000075f 00000000 GPR24: c1031004 00000000 00000000 00000001 c10f0000 eedf1000 00080000 00080000 NIP free_unref_page_prepare.part.93+0x48/0x60 LR free_unref_page+0x84/0x4b8 Call Trace: 0xeedf1000 (unreliable) free_unref_page+0x5c/0x4b8 mem_init+0xd0/0x194 start_kernel+0x4c0/0x6d0 set_ivor+0x13c/0x178 Reported-by: -
David Hildenbrand authored
Unused, let's drop it. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Christophe Leroy authored
Avoid multi-lines to help getting a complete view when using grep. They still remain under the 100 chars limit. Signed-off-by:
-
Christophe Leroy authored
PAGE_KERNEL_TEXT, PAGE_KERNEL_EXEC and PAGE_AGP are the same for all powerpcs. Remove duplicated definitions. Signed-off-by:
-
Christophe Leroy authored
update_mmu_cache() voids when hash page tables are not used. On PPC32 that means when MMU_FTR_HPTE_TABLE is not defined. On PPC64 that means when RADIX is enabled. Rename core part of update_mmu_cache() as __update_mmu_cache() and include the initial verification in an inlined caller. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Christophe Leroy authored
CONFIG_ARCH_HAS_HUGEPD is used to tell core mm when huge page directories are used. When they are not used, no need to provide hugepd_t or is_hugepd(), just rely on the core mm fallback definition. For that, change core mm behaviour so that CONFIG_ARCH_HAS_HUGEPD is used instead of indirect is_hugepd macro existence. powerpc being the only user of huge page directories, there is no impact on other architectures. Signed-off-by:
-
Christophe Leroy authored
linux/hugetlb.h has a fallback pgd_huge() macro for when pgd_huge is not defined. Remove the powerpc redundant definitions. Signed-off-by:
-
Michael Ellerman authored
Because 64-bit Book3S uses pgtable-nop4d.h, the P4D is folded into the PGD. So P4D entries are actually PGD entries, or vice versa. The other way to think of it is that the P4D is a single entry page table below the PGD. Zero bits of the address are needed to index into the P4D, therefore a P4D entry maps the same size address space as a PGD entry. As explained in the previous commit, there are no huge page sizes supported directly at the PGD level on 64-bit Book3S, so there are also no huge page sizes supported at the P4D level. Therefore p4d_is_leaf() can never be true, so drop the definition and fallback to the default implementation that always returns false. Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
On powerpc there are two ways for huge pages to be represented in the top level page table, aka PGD (Page Global Directory). If the address space mapped by an individual PGD entry does not correspond to a given huge page size, then the PGD entry points to a non-standard page table, known as a "hugepd" (Huge Page Directory). The hugepd contains some number of huge page PTEs sufficient to map the address space with the given huge page size. On the other hand, if the address space mapped by an individual PGD entry does correspond exactly to a given huge page size, that PGD entry is used to directly encode the huge page PTE in place. In this case the pgd_huge() wrapper indicates to generic code that the PGD entry is actually a huge page PTE. This commit deals with the pgd_huge() case only, it does nothing with respect to the hugepd case. Over time the size of the virtual address space supported on powerpc has increased several times, which means the location at which huge pages can sit in the tree has also changed. There have also been new huge page sizes added, with the introduction of the Radix MMU. On Power9 and later with the Radix MMU, the largest huge page size in any implementation is 1GB. Since the introduction of Radix, 1GB entries have been supported at the PUD level, with both 4K and 64K base page size. Radix has never had a supported huge page size at the PGD level. On Power8 or earlier, which uses the Hash MMU, or Power9 or later with the Hash MMU enabled, the largest huge page size is 16GB. Using the Hash MMU and a base page size of 4K, 16GB has never been a supported huge page size at the PGD level, due to the geometry being incompatible. The two supported huge page sizes (16M & 16GB) both use the hugepd format. Using the Hash MMU and a base page size of 64K, 16GB pages were supported in the past at the PGD level. However in commit ba95b5d0 ("powerpc/mm/book3s/64: Rework page table geometry for lower memory usage") the page table layout was reworked to shrink the size of the PGD. As a result the 16GB page size now fits at the PUD level when using 64K base page size. Therefore there are no longer any supported configurations where pgd_huge() can be true, so drop the definitions for pgd_huge(), and fallback to the generic definition which is always false. Fixes: ba95b5d0 ("powerpc/mm/book3s/64: Rework page table geometry for lower memory usage") Reviewed-by:
-
Michael Ellerman authored
The original microwatt submission[1] included some early debug code for using the Microwatt "potato" UART. The series that was eventually merged switched to using a standard UART, and so doesn't need any special early debug handling. But some of the original code was merged accidentally under the non-existent CONFIG_PPC_EARLY_DEBUG_MICROWATT. Drop the unused code. 1: https://lore.kernel.org/linuxppc-dev/20200509050340.GD1464954@thinks.paulus.ozlabs.org/ Fixes: 48b545b8 ("powerpc/microwatt: Use standard 16550 UART for console") Reported-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
In interrupt_64.S, formerly entry_64.S, there are two toc entries created for sys_call_table and compat_sys_call_table. These are no longer used, since the system call entry was converted from asm to C, so remove them. Fixes: 68b34588 ("powerpc/64/sycall: Implement syscall entry/exit logic in C") Acked-by:
-
Nicholas Piggin authored
Const function pointers by convention live in .data.rel.ro if they need to be relocated. Now that .data.rel.ro is linked into the read-only region, put them in the right section. This doesn't make much practical difference, but it will make the C conversion of sys_call_table a smaller change as far as linking goes. Signed-off-by:
-
Nicholas Piggin authored
Follow the binutils ld internal linker script and merge .got and .toc input sections in the .got output section. Signed-off-by:
-
Nicholas Piggin authored
ELFv2 does not use function descriptors so .opd is not required. Signed-off-by:
-
Nicholas Piggin authored
.sdata2 is a readonly small data section for ppc32, and .data.rel.ro is data that needs relocating but is read-only after that so these can both be moved to the read only memory region. Signed-off-by:
-
Nicholas Piggin authored
This moves linker-related tables from .data to read-only area. Relocations are performed at early boot time before memory is protected, after which there should be no modifications required. Signed-off-by:
-
Nicholas Piggin authored
Following the example from the binutils default linker script, move .got1 and .got2 out of .text, to just after RO_DATA. Signed-off-by:
-
Nicholas Piggin authored
powerpc has a number of read-only sections and tables that are put after RO_DATA(). Move the __end_rodata symbol to cover these as well. Setting memory to read-only at boot is done using __init_begin, change that to use __end_rodata. This makes is_kernel_rodata() exactly cover the read-only region, as well as other things using __end_rodata (e.g., kernel/dma/debug.c). Boot dmesg also prints the rodata size more accurately. Signed-off-by:
-
Michael Ellerman authored
Currently __init_begin is used as the boundary for strict RWX between executable/read-only text and data, and non-executable (after boot) code and data. But that's a little subtle, so add an explicit symbol to document that the SRWX boundary lies there, and add a comment making it clear that __init_begin must also begin there. Signed-off-by:
-
Michael Ellerman authored
Add a check that STRICT_ALIGN_SIZE is aligned to at least PAGE_SIZE. That then makes the alignment to PAGE_SIZE immediately after the alignment to STRICT_ALIGN_SIZE redundant, so remove it. Signed-off-by:
-
Michael Ellerman authored
Commit 24d33ac5 ("powerpc/64s: Make prom_init require RELOCATABLE") made prom_init depend on CONFIG_RELOCATABLE. But it missed cleaning up a case in the linker script for RELOCATABLE=n, and associated symbols. Remove them now. Fixes: 24d33ac5 ("powerpc/64s: Make prom_init require RELOCATABLE") Reported-by:
-
