- 17 Sep, 2020 8 commits
-
-
Pierre-Louis Bossart authored
Previous commits reduced the verbosity of errors during boot iterations, but there are still a couple remaining which generate false positives. Errors should only be logged when after last attempt to download firmware failed. Duplicating logs and assigning them different levels based on the iteration number isn't really elegant, use macro as suggested by Guennadi. Suggested-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917105633.2579047-9-kai.vehmanen@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Guennadi Liakhovetski authored
On multiple locations checks are performed of untrusted values after adding a constant to them. This is wrong, because the addition might overflow and the result can then pass the check, although the original value is invalid. Fix multiple such issues by checking the actual value and not a sum of it and a constant. Signed-off-by:
-
Guennadi Liakhovetski authored
No need to type-cast assignments between void and other pointers in C. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
-
Guennadi Liakhovetski authored
In some cases no "ret" variable is even needed, those functions always return 0 anyway, in other cases "ret" initialisation is redundant. Signed-off-by:
-
Pierre-Louis Bossart authored
We need to avoid reporting an error for -EACCESS when pm_runtime is not enabled. Signed-off-by:
-
Pierre-Louis Bossart authored
We need to avoid reporting an error for -EACCESS when pm_runtime is not enabled. Signed-off-by:
-
Karol Trzcinski authored
This field will be used to compare ldc file with loaded fw version, to assert validity of trace logs. Value used in sof-logger. Signed-off-by:
Karol Trzcinski <karolx.trzcinski@linux.intel.com> Reviewed-by:
-
Iulian Olaru authored
This patch adds debug support for imx platforms. This is important in order to gather information about the state of the DSP in case of an oops and the reason for the oops. This is done by checking if a message with a panic code has been placed in the debug box, in the imx8_dsp_handle_request function from sof/imx. If positive, the function imx8_dump, added in common, will be called. The first step is to gather information about the registers, filename, line number and stack by calling the imx8_get_registers, added in common. Then the information will be printed to the console by calling the get_status function. Signed-off-by:
Iulian Olaru <iulianolaru249@yahoo.com> Reviewed-by:
Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by:
-
- 11 Sep, 2020 14 commits
-
-
Mark Brown authored
Merge series "ASoC: SOF: DSP core management fixes for 5.10" from Kai Vehmanen <kai.vehmanen@linux.intel.com>: This series contains some improvements to how DSP core management is done in SOF, and adds a distinction between cores managed by the host versus cores managed by the DSP. Pierre-Louis Bossart (1): ASoC: SOF: Intel: hda-loader: s/master/primary Ranjani Sridharan (3): ASoC: SOF: rename cores_mask to host_managed_cores_mask ASoC: SOF: Intel: hda: modify core_power_up/down op ASoC: SOF: Intel: remove the HDA_DSP_CORE_MASK() macro sound/soc/sof/intel/apl.c | 2 +- sound/soc/sof/intel/bdw.c | 2 +- sound/soc/sof/intel/byt.c | 6 +++--- sound/soc/sof/intel/cnl.c | 15 ++++----------- sound/soc/sof/intel/hda-dsp.c | 20 +++++++++++++++++--- sound/soc/sof/intel/hda-loader.c | 11 +++++------ sound/soc/sof/intel/hda.c | 2 +- sound/soc/sof/intel/hda.h | 3 --- sound/soc/sof/intel/shim.h | 2 +- sound/soc/sof/intel/tgl.c | 2 +- 10 files changed, 34 insertions(+), 31 deletions(-) -- 2.27.0
-
Mark Brown authored
Merge series "ASoC: mediatek: mt8183-da7219: support machine driver for rt1015p" from Tzung-Bi Shih <tzungbi@google.com>: The series reuses mt8183-da7219-max98357.c for supporting machine driver with rt1015p speaker amplifier. The 1st patch adds document for the new proposed compatible string. The 2nd patch changes the machine driver to support "RT1015P" codec. Tzung-Bi Shih (2): ASoC: dt-bindings: mt8183-da7219: add compatible string for using rt1015p ASoC: mediatek: mt8183-da7219: support machine driver with rt1015p .../bindings/sound/mt8183-da7219-max98357.txt | 1 + sound/soc/mediatek/Kconfig | 1 + .../mediatek/mt8183/mt8183-da7219-max98357.c | 40 +++++++++++++++++++ 3 files changed, 42 insertions(+) -- 2.28.0.526.ge36021eeef-goog -
Mark Brown authored
Merge series "ASoC: ti: j721e-evm: Support for j7200 variant" from Peter Ujfalusi <peter.ujfalusi@ti.com>: Hi, Changes since v1: - Suffix the 2359296000 constant with 'u' to silence C90 warning When j7200 SOM is connected to the CPB, the audio setup is a bit different: Only 48KHz family have clock path, 44.1KHz is not supported. Update the binding documentation and add support for the j7200 version of CPB to the driver. Regards, Peter --- Peter Ujfalusi (2): ASoC: dt-bindings: ti,j721e-cpb-audio: Document support for j7200-cpb ASoC: ti: j721e-evm: Add support for j7200-cpb audio .../bindings/sound/ti,j721e-cpb-audio.yaml | 92 ++++++++++++++----- sound/soc/ti/j721e-evm.c | 11 +++ 2 files changed, 81 insertions(+), 22 deletions(-) -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
-
Olivier Moysan authored
Enable support of pm_runtime on STM32 SAI driver to allow SAI power state monitoring. pm_runtime_put_autosuspend() is called from ASoC framework on pcm device close. The pmdown_time delay is available in runtime context, and may be set in SAI driver to take into account shutdown delay on playback. However, this shutdown delay is already handled in the DAPMs of the audio codec linked to SAI CPU DAI. So, the choice is made, not to support this delay on CPU DAI side. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20200911081507.7276-1-olivier.moysan@st.comSigned-off-by:
-
Tuo Li authored
The variable bclk_rate is checked in: if (bclk_rate && mclk_rate % bclk_rate) This indicates that bclk_rate can be zero. If so, a divide-by-zero bug will occur: div_bclk = mclk_rate / bclk_rate; To fix this possible bug, the function returns -EINVAL when bclk_rate is zero. Signed-off-by:
Tuo Li <tuoli96@outlook.com> Link: https://lore.kernel.org/r/TY2PR04MB4029799E60A5BCAAD5B7B5BBB8280@TY2PR04MB4029.apcprd04.prod.outlook.comSigned-off-by:
-
Sathyanarayana Nujella authored
DMI product name is used to support system variants based out of tgl_max98373_rt5682 in current implementation. Replace this DMI search with DMI_OEM_STRING. Coreboot(BIOS used in these systems) is setting the needed DMI_OEM_STRING field to uniquely identify these systems. Signed-off-by:
Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
Use inclusive language for DSP cores. Signed-off-by:
Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by:
Seppo Ingalsuo <seppo.ingalsuo@intel.com> Signed-off-by:
-
Ranjani Sridharan authored
Remove the HDA_DSP_CORE_MASK() macro and use BIT() and GENMASK() macros directly for more clarity. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Reviewed-by:
Keyon Jie <yang.jie@linux.intel.com> Reviewed-by:
-
Ranjani Sridharan authored
Modify the core_power_up/down ops for HDA platforms to restrict the core_mask to the ones allowed by chip->cores_mask. This is needed because on some HDA platforms not all cores can be powered up/down by the host and this must be handled internally in the FW. Signed-off-by:
-
Ranjani Sridharan authored
Rename the cores_mask in struct sof_intel_dsp_desc to host_managed_cores_mask to be more indicative of the fact that only these cores can be powered up/down by the host. Signed-off-by:
-
Peter Ujfalusi authored
When j7200 SOM is attached to the CPB we only have parent clock for 48KHz family and the rate of the parent clock is 2359296000Hz. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200910124110.19361-3-peter.ujfalusi@ti.comSigned-off-by:
-
Peter Ujfalusi authored
j721e or j7200 SOM can be attached to the same Common Processor Board (CPB) With the j7200 SOM only the 48KHz family parent clock is available and McASP0 is used for the audio. Signed-off-by:
-
Tzung-Bi Shih authored
Supports machine driver with rt1015p ("mt8183_da7219_rt1015p"). Embeds in the existing mt8183-da7219-max98357.c because they share most of the code. Signed-off-by:Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200911024833.1673961-3-tzungbi@google.comSigned-off-by:
-
Tzung-Bi Shih authored
Machines with rt1015p should use the compatible string "mediatek,mt8183_da7219_rt1015p". Signed-off-by:
-
- 10 Sep, 2020 11 commits
-
-
Mark Brown authored
Merge series "ASoC: q6dsp: Add support to Codec Ports." from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: LPASS IP on SoCs like SM8250 has Digital Codec part integrated into it. This ports are exposed in Q6DSP as Codec ports. This patchset adds support to those q6afe ports along with q6routing and q6afe-dai. This patchset has been tested along with other patches on Qualcomm Robotics RB5 Platform with Soundwire and WSA8815 Codec. Thanks, srini Srinivas Kandagatla (8): ASoC: q6dsp: q6afe: add support to Codec DMA ports ASoC: q6dsp: q6routing: add support to Codec DMA ports ASoC: q6dsp: q6afe: prepare afe_apr_send_pkt to take response opcode ASoC: q6dsp: q6afe: add global q6afe waitqueue ASoC: q6dsp: q6afe: add lpass hw voting support ASoC: q6dsp: q6afe: update q6afe_set_param to support global clocks ASoC: q6dsp: q6afe: add codec lpass clocks ASoC: q6dsp: q6afe-dai: add support to Codec DMA ports include/dt-bindings/sound/qcom,q6afe.h | 22 ++ sound/soc/qcom/qdsp6/q6afe-dai.c | 229 ++++++++++++++++++ sound/soc/qcom/qdsp6/q6afe.c | 308 +++++++++++++++++++++++-- sound/soc/qcom/qdsp6/q6afe.h | 33 ++- sound/soc/qcom/qdsp6/q6routing.c | 121 +++++++++- 5 files changed, 689 insertions(+), 24 deletions(-) -- 2.21.0
-
Srinivas Kandagatla authored
Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200910101732.23484-9-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
LPASS now has integrated codec control whose clocks are controlled by Q6DSP. This patch adds support to those clocks. Signed-off-by:
-
Srinivas Kandagatla authored
Previously there was no case where we need to set clock or send commands that are not associated with q6afe ports, now we have cases like clock voting and clock consumers like codecs that needed these clocks. update q6afe_set_param() to support such cases, including token passing. Signed-off-by:
-
Srinivas Kandagatla authored
Signed-off-by:
-
Srinivas Kandagatla authored
In some cases like clocks q6afe would have to process commands without an associated q6afe port, in such cases waitqueue is required at global level to wait for the command to finish. This patch also adds the command result to go with this waitqueue. Signed-off-by:
-
Srinivas Kandagatla authored
Update afe_apr_send_pkt() to take response opcode that it should wait for. This is helpful in cases where we expect response other than the actual command opcode. Signed-off-by:
-
Srinivas Kandagatla authored
Signed-off-by:
-
Srinivas Kandagatla authored
New LPASS supports various codec macros, DSP firmware already has support to those ports. Add corresponding configuration support to those ports in adsp drivers. Signed-off-by:
-
Tzung-Bi Shih authored
Adds DT binding document for rt1015p. Signed-off-by:
-
Tzung-Bi Shih authored
Adds rt1015p codec driver. Rt1015p is a rt1015 variant. - It doesn't support I2C. - It only supports S24, 48kHz, 64FS. Signed-off-by:
-
- 09 Sep, 2020 6 commits
-
-
Codrin Ciubotariu authored
This patch adds DT bindings for the new Microchip S/PDIF TX Controller embedded inside sama7g5 SoCs. Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200909145348.367033-1-codrin.ciubotariu@microchip.comSigned-off-by:
-
Codrin Ciubotariu authored
The new SPDIF TX controller is a serial port compliant with the IEC- 60958 standard. It also supports programmable User Data and Channel Status fields. This IP is embedded in Microchip's sama7g5 SoC. Signed-off-by:
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In ASoC TXx9 ACLC driver, a tasklet is still used for offloading the hardware reset function. It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in TXx9 ACLC driver with a simple work. The conversion is fairly straightforward. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200903104749.21435-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In ASoC SH SIU driver, a tasklet is still used for offloading the hardware reset function. It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in SH SIU driver with a simple work. The conversion is fairly straightforward. Signed-off-by:
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In ASoC FSL ESAI CPU DAI driver, a tasklet is still used for offloading the hardware reset function. It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in fsl esai driver with a simple work. The conversion is fairly straightforward. Signed-off-by:
-
Mark Brown authored
Merge branch 'topic/tasklet-convert' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.10
-
- 08 Sep, 2020 1 commit
-
-
Mark Brown authored
Merge series "ASoC: qcom: common: Parse auxiliary devices from device tree" from Stephan Gerhold <stephan@gerhold.net>: In some cases we need to probe additional audio components that do not appear as part of the DAI links specified in the device tree. Examples for this are auxiliary devices such as analog amplifiers or codecs. The ASoC core provides a way to probe these components by adding them to snd_soc_card->aux_dev. This patch set allows specifying them in the device tree through a new "aux-devs" property. v1: https://lore.kernel.org/linux-arm-msm/20200819091533.2334-1-stephan@gerhold.net/ Changes in v2: - Fix value type in device tree bindings: aux-devs should be array of phandles without any arguments, so change <phandles with arguments> -> <array of phandles> Stephan Gerhold (2): ASoC: dt-bindings: qcom: Document "aux-devs" property ASoC: qcom: common: Parse auxiliary devices from device tree .../devicetree/bindings/sound/qcom,apq8016-sbc.txt | 7 +++++++ Documentation/devicetree/bindings/sound/qcom,apq8096.txt | 8 ++++++++ Documentation/devicetree/bindings/sound/qcom,sdm845.txt | 8 ++++++++ sound/soc/qcom/common.c | 4 ++++ 4 files changed, 27 insertions(+) -- 2.28.0
-
