- 04 Sep, 2015 18 commits
-
-
Maninder Singh authored
misspelled words for check:- chcek chck cehck I myself did these spell mistakes in changelog for patches, Thus suggesting to add in spelling.txt, so that checkpatch.pl warns it earlier. References:- ./arch/powerpc/kernel/exceptions-64e.S:456: . . . make sure you chcek https://lkml.org/lkml/2015/6/25/289 ./arch/x86/mm/pageattr.c:1368: * No need to cehck in that case [akpm@linux-foundation.org: add whcih->which, whcih I always get wrong] Signed-off-by:
Maninder Singh <maninder1.s@samsung.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
fsnotify_destroy_mark_locked() is subtle to use because it temporarily releases group->mark_mutex. To avoid future problems with this function, split it into two. fsnotify_detach_mark() is the part that needs group->mark_mutex and fsnotify_free_mark() is the part that must be called outside of group->mark_mutex. This way it's much clearer what's going on and we also avoid some pointless acquisitions of group->mark_mutex. Signed-off-by:
Jan Kara <jack@suse.com> Signed-off-by:
-
Jan Kara authored
Free list is used when all marks on given inode / mount should be destroyed when inode / mount is going away. However we can free all of the marks without using a special list with some care. Signed-off-by:
-
Jan Kara authored
Signed-off-by:
-
Jan Kara authored
A check in inotify_fdinfo() checking whether mark is valid was always true due to a bug. Luckily we can never get to invalidated marks since we hold mark_mutex and invalidated marks get removed from the group list when they are invalidated under that mutex. Anyway fix the check to make code more future proof. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dave Hansen authored
I have a _tiny_ microbenchmark that sits in a loop and writes single bytes to a file. Writing one byte to a tmpfs file is around 2x slower than reading one byte from a file, which is a _bit_ more than I expecte. This is a dumb benchmark, but I think it's hard to deny that write() is a hot path and we should avoid unnecessary overhead there. I did a 'perf record' of 30-second samples of read and write. The top item in a diffprofile is srcu_read_lock() from fsnotify(). There are active inotify fd's from systemd, but nothing is actually listening to the file or its part of the filesystem. I *think* we can avoid taking the srcu_read_lock() for the common case where there are no actual marks on the file. This means that there will both be nothing to notify for *and* implies that there is no need for clearing the ignore mask. This patch gave a 13.1% speedup in writes/second on my test, which is an improvement from the 10.8% that I saw with the last version. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by:
-
Yuriy Kolerov authored
Architectures which support VGA console must define screen_info structurture from "uapi/linux/screen_info.h". Otherwise undefined symbol error occurs. Usually it's defined in "setup.c" for each architecture. If an architecture does not support VGA console (ARC's case) there are 2 ways: define a dummy instance of screen_info or add a negative dependency for VGA_CONSOLE in to prevent selecting this option. I've implemented the second way. However the best solution is to add HAVE_VGA_CONSOLE option for targets which support VGA console. Then turn off VGA_CONSOLE by default and add dependency to HAVE_VGA_CONSOLE. But right now it's better to just add a negative dependency for ARC and then consider how to collaborate about this issue with maintainers of other architectures. Signed-off-by:
Yuriy Kolerov <yuriy.kolerov@synopsys.com> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Jaya Kumar <jayalk@intworks.biz> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Andy Lutomirski authored
Per Andrew Morgan's request, add a securebit to allow admins to disable PR_CAP_AMBIENT_RAISE. This securebit will prevent processes from adding capabilities to their ambient set. For simplicity, this disables PR_CAP_AMBIENT_RAISE entirely rather than just disabling setting previously cleared bits. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Andrew G. Morgan <morgan@kernel.org> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Cc: Kees Cook <keescook@chromium.org> Cc: Christoph Lameter <cl@linux.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Aaron Jones <aaronmdjones@gmail.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Andrew G. Morgan <morgan@kernel.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: Markku Savela <msa@moth.iki.fi> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Andy Lutomirski authored
This test focuses on ambient capabilities. It requires either root or the ability to create user namespaces. Some of the test cases will be skipped for nonroot users. Signed-off-by:
-
Andy Lutomirski authored
Credit where credit is due: this idea comes from Christoph Lameter with a lot of valuable input from Serge Hallyn. This patch is heavily based on Christoph's patch. ===== The status quo ===== On Linux, there are a number of capabilities defined by the kernel. To perform various privileged tasks, processes can wield capabilities that they hold. Each task has four capability masks: effective (pE), permitted (pP), inheritable (pI), and a bounding set (X). When the kernel checks for a capability, it checks pE. The other capability masks serve to modify what capabilities can be in pE. Any task can remove capabilities from pE, pP, or pI at any time. If a task has a capability in pP, it can add that capability to pE and/or pI. If a task has CAP_SETPCAP, then it can add any capability to pI, and it can remove capabilities from X. Tasks are not the only things that can have capabilities; files can also have capabilities. A file can have no capabilty information at all [1]. If a file has capability information, then it has a permitted mask (fP) and an inheritable mask (fI) as well as a single effective bit (fE) [2]. File capabilities modify the capabilities of tasks that execve(2) them. A task that successfully calls execve has its capabilities modified for the file ultimately being excecuted (i.e. the binary itself if that binary is ELF or for the interpreter if the binary is a script.) [3] In the capability evolution rules, for each mask Z, pZ represents the old value and pZ' represents the new value. The rules are: pP' = (X & fP) | (pI & fI) pI' = pI pE' = (fE ? pP' : 0) X is unchanged For setuid binaries, fP, fI, and fE are modified by a moderately complicated set of rules that emulate POSIX behavior. Similarly, if euid == 0 or ruid == 0, then fP, fI, and fE are modified differently (primary, fP and fI usually end up being the full set). For nonroot users executing binaries with neither setuid nor file caps, fI and fP are empty and fE is false. As an extra complication, if you execute a process as nonroot and fE is set, then the "secure exec" rules are in effect: AT_SECURE gets set, LD_PRELOAD doesn't work, etc. This is rather messy. We've learned that making any changes is dangerous, though: if a new kernel version allows an unprivileged program to change its security state in a way that persists cross execution of a setuid program or a program with file caps, this persistent state is surprisingly likely to allow setuid or file-capped programs to be exploited for privilege escalation. ===== The problem ===== Capability inheritance is basically useless. If you aren't root and you execute an ordinary binary, fI is zero, so your capabilities have no effect whatsoever on pP'. This means that you can't usefully execute a helper process or a shell command with elevated capabilities if you aren't root. On current kernels, you can sort of work around this by setting fI to the full set for most or all non-setuid executable files. This causes pP' = pI for nonroot, and inheritance works. No one does this because it's a PITA and it isn't even supported on most filesystems. If you try this, you'll discover that every nonroot program ends up with secure exec rules, breaking many things. This is a problem that has bitten many people who have tried to use capabilities for anything useful. ===== The proposed change ===== This patch adds a fifth capability mask called the ambient mask (pA). pA does what most people expect pI to do. pA obeys the invariant that no bit can ever be set in pA if it is not set in both pP and pI. Dropping a bit from pP or pI drops that bit from pA. This ensures that existing programs that try to drop capabilities still do so, with a complication. Because capability inheritance is so broken, setting KEEPCAPS, using setresuid to switch to nonroot uids, and then calling execve effectively drops capabilities. Therefore, setresuid from root to nonroot conditionally clears pA unless SECBIT_NO_SETUID_FIXUP is set. Processes that don't like this can re-add bits to pA afterwards. The capability evolution rules are changed: pA' = (file caps or setuid or setgid ? 0 : pA) pP' = (X & fP) | (pI & fI) | pA' pI' = pI pE' = (fE ? pP' : pA') X is unchanged If you are nonroot but you have a capability, you can add it to pA. If you do so, your children get that capability in pA, pP, and pE. For example, you can set pA = CAP_NET_BIND_SERVICE, and your children can automatically bind low-numbered ports. Hallelujah! Unprivileged users can create user namespaces, map themselves to a nonzero uid, and create both privileged (relative to their namespace) and unprivileged process trees. This is currently more or less impossible. Hallelujah! You cannot use pA to try to subvert a setuid, setgid, or file-capped program: if you execute any such program, pA gets cleared and the resulting evolution rules are unchanged by this patch. Users with nonzero pA are unlikely to unintentionally leak that capability. If they run programs that try to drop privileges, dropping privileges will still work. It's worth noting that the degree of paranoia in this patch could possibly be reduced without causing serious problems. Specifically, if we allowed pA to persist across executing non-pA-aware setuid binaries and across setresuid, then, naively, the only capabilities that could leak as a result would be the capabilities in pA, and any attacker *already* has those capabilities. This would make me nervous, though -- setuid binaries that tried to privilege-separate might fail to do so, and putting CAP_DAC_READ_SEARCH or CAP_DAC_OVERRIDE into pA could have unexpected side effects. (Whether these unexpected side effects would be exploitable is an open question.) I've therefore taken the more paranoid route. We can revisit this later. An alternative would be to require PR_SET_NO_NEW_PRIVS before setting ambient capabilities. I think that this would be annoying and would make granting otherwise unprivileged users minor ambient capabilities (CAP_NET_BIND_SERVICE or CAP_NET_RAW for example) much less useful than it is with this patch. ===== Footnotes ===== [1] Files that are missing the "security.capability" xattr or that have unrecognized values for that xattr end up with has_cap set to false. The code that does that appears to be complicated for no good reason. [2] The libcap capability mask parsers and formatters are dangerously misleading and the documentation is flat-out wrong. fE is *not* a mask; it's a single bit. This has probably confused every single person who has tried to use file capabilities. [3] Linux very confusingly processes both the script and the interpreter if applicable, for reasons that elude me. The results from thinking about a script's file capabilities and/or setuid bits are mostly discarded. Preliminary userspace code is here, but it needs updating: https://git.kernel.org/cgit/linux/kernel/git/luto/util-linux-playground.git/commit/?h=cap_ambient&id=7f5afbd175d2 Here is a test program that can be used to verify the functionality (from Christoph): /* * Test program for the ambient capabilities. This program spawns a shell * that allows running processes with a defined set of capabilities. * * (C) 2015 Christoph Lameter <cl@linux.com> * Released under: GPL v3 or later. * * * Compile using: * * gcc -o ambient_test ambient_test.o -lcap-ng * * This program must have the following capabilities to run properly: * Permissions for CAP_NET_RAW, CAP_NET_ADMIN, CAP_SYS_NICE * * A command to equip the binary with the right caps is: * * setcap cap_net_raw,cap_net_admin,cap_sys_nice+p ambient_test * * * To get a shell with additional caps that can be inherited by other processes: * * ./ambient_test /bin/bash * * * Verifying that it works: * * From the bash spawed by ambient_test run * * cat /proc/$$/status * * and have a look at the capabilities. */ #include <stdlib.h> #include <stdio.h> #include <errno.h> #include <cap-ng.h> #include <sys/prctl.h> #include <linux/capability.h> /* * Definitions from the kernel header files. These are going to be removed * when the /usr/include files have these defined. */ #define PR_CAP_AMBIENT 47 #define PR_CAP_AMBIENT_IS_SET 1 #define PR_CAP_AMBIENT_RAISE 2 #define PR_CAP_AMBIENT_LOWER 3 #define PR_CAP_AMBIENT_CLEAR_ALL 4 static void set_ambient_cap(int cap) { int rc; capng_get_caps_process(); rc = capng_update(CAPNG_ADD, CAPNG_INHERITABLE, cap); if (rc) { printf("Cannot add inheritable cap\n"); exit(2); } capng_apply(CAPNG_SELECT_CAPS); /* Note the two 0s at the end. Kernel checks for these */ if (prctl(PR_CAP_AMBIENT, PR_CAP_AMBIENT_RAISE, cap, 0, 0)) { perror("Cannot set cap"); exit(1); } } int main(int argc, char **argv) { int rc; set_ambient_cap(CAP_NET_RAW); set_ambient_cap(CAP_NET_ADMIN); set_ambient_cap(CAP_SYS_NICE); printf("Ambient_test forking shell\n"); if (execv(argv[1], argv + 1)) perror("Cannot exec"); return 0; } Signed-off-by: Christoph Lameter <cl@linux.com> # Original author Signed-off-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by:
-
Andrew Morton authored
- Make it clear that the `node' arg refers to memory allocations only: kthread_create_on_node() does not pin the new thread to that node's CPUs. - Encourage the use of NUMA_NO_NODE. [nzimmer@sgi.com: use NUMA_NO_NODE in kthread_create() also] Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Tejun Heo <tj@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Yinghai Lu authored
Tony Luck found on his setup, if memory block size 512M will cause crash during booting. BUG: unable to handle kernel paging request at ffffea0074000020 IP: get_nid_for_pfn+0x17/0x40 PGD 128ffcb067 PUD 128ffc9067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8 #1 ... Call Trace: ? register_mem_sect_under_node+0x66/0xe0 register_one_node+0x17b/0x240 ? pci_iommu_alloc+0x6e/0x6e topology_init+0x3c/0x95 do_one_initcall+0xcd/0x1f0 The system has non continuous RAM address: BIOS-e820: [mem 0x0000001300000000-0x0000001cffffffff] usable BIOS-e820: [mem 0x0000001d70000000-0x0000001ec7ffefff] usable BIOS-e820: [mem 0x0000001f00000000-0x0000002bffffffff] usable BIOS-e820: [mem 0x0000002c18000000-0x0000002d6fffefff] usable BIOS-e820: [mem 0x0000002e00000000-0x00000039ffffffff] usable So there are start sections in memory block not present. For example: memory block : [0x2c18000000, 0x2c20000000) 512M first three sections are not present. The current register_mem_sect_under_node() assume first section is present, but memory block section number range [start_section_nr, end_section_nr] would include not present section. For arch that support vmemmap, we don't setup memmap for struct page area within not present sections area. So skip the pfn range that belong to absent section. [akpm@linux-foundation.org: simplification] [rientjes@google.com: more simplification] Fixes: bdee237c ("x86: mm: Use 2GB memory block size on large memory x86-64 systems") Fixes: 982792c7 ("x86, mm: probe memory block size for generic x86 64bit") Signed-off-by:Yinghai Lu <yinghai@kernel.org> Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Tony Luck <tony.luck@intel.com> Tested-by:
-
Ryan Ding authored
ocfs2_file_write_iter() is usng the wrong return value ('written'). This will cause ocfs2_rw_unlock() be called both in write_iter & end_io, triggering a BUG_ON. This issue was introduced by commit 7da839c4 ("ocfs2: use __generic_file_write_iter()"). Orabug: 21612107 Fixes: 7da839c4 ("ocfs2: use __generic_file_write_iter()") Signed-off-by:Ryan Ding <ryan.ding@oracle.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tang Chen authored
Commit f9126ab9 ("memory-hotplug: fix wrong edge when hot add a new node") hot-added memory range to memblock, after creating pgdat for new node. But there is a problem: add_memory() |--> hotadd_new_pgdat() |--> free_area_init_node() |--> get_pfn_range_for_nid() |--> find start_pfn and end_pfn in memblock |--> ...... |--> memblock_add_node(start, size, nid) -------- Here, just too late. get_pfn_range_for_nid() will find that start_pfn and end_pfn are both 0. As a result, when adding memory, dmesg will give the following wrong message. Initmem setup node 5 [mem 0x0000000000000000-0xffffffffffffffff] On node 5 totalpages: 0 Built 5 zonelists in Node order, mobility grouping on. Total pages: 32588823 Policy zone: Normal init_memory_mapping: [mem 0x60000000000-0x607ffffffff] The solution is simple, just add the memory range to memblock a little earlier, before hotadd_new_pgdat(). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.2.x] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.3 development cycle. Like with GPIO it's a lot of stuff. If my subsystems are any sign of the overall tempo of the kernel v4.3 will be a gigantic diff. [ It looks like 4.3 is calmer than 4.2 in most other subsystems, but we'll see - Linus ] Core changes: - It is possible configure groups in debugfs. - Consolidation of chained IRQ handler install/remove replacing all call sites where irq_set_handler_data() and irq_set_chained_handler() were done in succession with a combined call to irq_set_chained_handler_and_data(). This series was created by Thomas Gleixner after the problem was observed by Russell King. - Tglx also made another series of patches switching __irq_set_handler_locked() for irq_set_handler_locked() which is way cleaner. - Tglx also wrote a good bunch of patches to make use of irq_desc_get_xxx() accessors and avoid looking up irq_descs from IRQ numbers. The goal is to get rid of the irq number from the handlers in the IRQ flow which is nice. Driver feature enhancements: - Power management support for the SiRF SoC Atlas 7. - Power down support for the Qualcomm driver. - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks in IRQ handlers to play nice with the realtime patch set. - Rework and new modes handling for Qualcomm SPMI-MPP. - Pinconf power source config for SH PFC. New drivers and subdrivers: - A new driver for Conexant Digicolor CX92755. - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5, ProXtream2 and PH1-LD6b SoC pin control support. - Reverse-egineered the S/PDIF settings for the Allwinner sun4i driver. - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs - A new Freescale i.mx6ul subdriver. Cleanup: - Remove platform data support in a number of SH PFC subdrivers" * tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits) pinctrl: at91: fix null pointer dereference pinctrl: mediatek: Implement wake handler and suspend resume pinctrl: mediatek: Fix multiple registration issue. pinctrl: sh-pfc: r8a7794: add USB pin groups pinctrl: at91: Use generic irq_{request,release}_resources() pinctrl: cherryview: Use raw_spinlock for locking pinctrl: baytrail: Use raw_spinlock for locking pinctrl: imx6ul: Remove .owner field pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks pinctrl: sun4i: add spdif to pin description. pinctrl: atlas7: clear ugly branch statements for pull and drivestrength pinctrl: baytrail: Serialize all register access pinctrl: baytrail: Drop FSF mailing address pinctrl: rockchip: only enable gpio clock when it setting pinctrl/mediatek: fix spelling mistake in dev_err error message pinctrl: cherryview: Serialize all register access pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting pinctrl: nomadik: reflect current input value ... -
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.3 kernel cycle. There is quite a lot going on in the GPIO subsystem this merge window, so the main matter is decribed below. The hits in other subsystems when making the GPIO flags optional are all ACKed by their respective subsystem maintainers. Core changes: - Root out the wrapper devm_gpiod_get() and gpiod_get() etc versions of the descriptor calls that did not use the flags argument on the end. This was around for too long and eventually Uwe Kleine-König took the time to clean it out and the last users are removed along with the macros in this tag. In several cases the use of flags simplifies the code. For this reason we have (ACKed) patches hitting in DRM, IIO, media, NFC, USB+PHY up until we hammer in the nail with removing the macros. - Add a fat document describing how much ready-made GPIO stuff we have i the kernel to discourage people from reinventing a square wheel in userspace, as so often happens. - Create a separate lockdep class for each instance of a GPIO IRQ chip instead of using one class for all chips, as the current code will not work with systems with several GPIO chips doing lockdep debugging. - Protect against driver unloading also when a GPIO line is only used as IRQ for the GPIOLIB_IRQCHIP helpers. - If the GPIO chip has no designated owner, assign the parent device driver owner as owner. - Consolidation of chained IRQ handler install/remove replacing all call sites where irq_set_handler_data() and irq_set_chained_handler() were done in succession with a combined call to irq_set_chained_handler_and_data(). This series was created by Thomas Gleixner after the problem was observed by Russell King. - Tglx also made another series of patches switching __irq_set_handler_locked() for irq_set_handler_locked() which is way cleaner. - Tglx and Jiang Liu wrote a good bunch of patches to make use of irq_desc_get_xxx() accessors and avoid looking up irq_descs from IRQ numbers. The goal is to get rid of the irq number from the handlers in the IRQ flow which is nice. - Rob Herring killed off the set_irq_flags() for all GPIO drivers. This was an ARM specific function that is replaced with the generic irq_modify_status() where special flags are actually needed. - When an OF node has a pin range for its GPIOs, return -EPROBE_DEFER if the pin controller isn't available. Pretty logical, yet needed to be fixed. - If a driver using GPIOLIB_IRQCHIP has its own irq_*_resources call back, then call these instead of the defaults provided by the GPIOLIB. - Fix an undocumented ABI hole: named GPIOs were not properly documented. Driver improvements: - Add get_direction() support to the generic GPIO driver, it's strange that we didn't have that before. - Make it possible to have input-only GPIO chips using the generic GPIO driver. - Clean out platform data support from the Emma Mobile (EM) driver - Finegrained runtime PM support for the RCAR driver. - Support r8a7795 (R-car H3) in the RCAR driver. - Support interrupts on GPIOs 16 thru 31 in the DaVinci driver. - Some consolidation and new support in the MPC8xxx driver, we now support MPC5125. - Preempt-RT-friendly patches: the OMAP, MPC8xxx, drivers uses raw spinlocks making it work better with the realime patches. - Interrupt support for the EXTRAXFS GPIO driver. - Make the ETRAXFS GPIO driver support also ARTPEC-3. - Interrupt and wakeup support for the BRCMSTB driver, also for wakeup from S5 cold boot. - Mask MXC IRQs during suspend. - Improve OMAP2 GPIO set_debounce() to work according to spec. - The VF610 driver handles IRQs properly. New drivers: - ZTE ZX GPIO driver" * tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) Revert "gpio: extraxfs: fix returnvar.cocci warnings" gpio: tc3589x: use static container helper gpio: xlp: fix error return code gpio: vf610: handle level IRQ's properly gpio: max732x: Fix error handling in probe() gpio: omap: fix clk_prepare/unprepare usage gpio: omap: protect regs access in omap_gpio_irq_handler gpio: omap: fix omap2_set_gpio_debounce gpio: omap: switch to use platform_get_irq gpio: omap: remove wrong irq_domain_remove usage in probe gpiolib: add description for gpio irqchip fields in struct gpio_chip gpio: extraxfs: fix returnvar.cocci warnings gpiolib: irqchip: use different lockdep class for each gpio irqchip gpio/grgpio: fix deadlock in grgpio_irq_unmap() Documentation: gpio: consumer: describe active low property gpio: mxc: fix section mismatch warning gpio/mxc: mask gpio interrupts in suspend gpio: omap: Fix missing raw locks conversion gpio: brcmstb: support wakeup from S5 cold boot gpio: brcmstb: Add interrupt and wakeup source support ... -
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull tile updates from Chris Metcalf: "This includes secure computing support as well as miscellaneous minor improvements" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: correct some typos in opcode type names tile/vdso: emit a GNU hash as well tile: Remove finish_arch_switch tile: enable full SECCOMP support tile/time: Migrate to new 'set-state' interface
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Will Deacon: - Support for new architectural features introduced in ARMv8.1: * Privileged Access Never (PAN) to catch user pointer dereferences in the kernel * Large System Extension (LSE) for building scalable atomics and locks (depends on locking/arch-atomic from tip, which is included here) * Hardware Dirty Bit Management (DBM) for updating clean PTEs automatically - Move our PSCI implementation out into drivers/firmware/, where it can be shared with arch/arm/. RMK has also pulled this component branch and has additional patches moving arch/arm/ over. MAINTAINERS is updated accordingly. - Better BUG implementation based on the BRK instruction for trapping - Leaf TLB invalidation for unmapping user pages - Support for PROBE_ONLY PCI configurations - Various cleanups and non-critical fixes, including: * Always flush FP/SIMD state over exec() * Restrict memblock additions based on range of linear mapping * Ensure *(LIST_POISON) generates a fatal fault * Context-tracking syscall return no longer corrupts return value when not forced on. * Alternatives patching synchronisation/stability improvements * Signed sub-word cmpxchg compare fix (tickled by HAVE_CMPXCHG_LOCAL) * Force SMP=y * Hide direct DCC access from userspace * Fix EFI stub memory allocation when DRAM starts at 0x0 * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits) arm64: flush FP/SIMD state correctly after execve() arm64: makefile: fix perf_callchain.o kconfig dependency arm64: set MAX_MEMBLOCK_ADDR according to linear region size of/fdt: make memblock maximum physical address arch configurable arm64: Fix source code file path in comments arm64: entry: always restore x0 from the stack on syscall return arm64: mdscr_el1: avoid exposing DCC to userspace arm64: kconfig: Move LIST_POISON to a safe value arm64: Add __exception_irq_entry definition for function graph arm64: mm: ensure patched kernel text is fetched from PoU arm64: alternatives: ensure secondary CPUs execute ISB after patching arm64: make ll/sc __cmpxchg_case_##name asm consistent arm64: dma-mapping: Simplify pgprot handling arm64: restore cpu suspend/resume functionality ARM64: PCI: do not enable resources on PROBE_ONLY systems arm64: cmpxchg: truncate sub-word signed types before comparison arm64: alternative: put secondary CPUs into polling loop during patch arm64/Documentation: clarify wording regarding memory below the Image arm64: lse: fix lse cmpxchg code indentation arm64: remove redundant object file list ...
-
- 03 Sep, 2015 22 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in <uapi/asm/swab.h> are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ... -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: - support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask from Benjamin Herrenschmidt - EEH fixes for SRIOV from Gavin - introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth - use hardware RNG for arch_get_random_seed_* not arch_get_random_* from Paul Mackerras - seccomp filter support from Michael Ellerman - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh Salgaonkar - add powerpc timebase as a trace clock source from Naveen N. Rao - misc cleanups in the xmon, signal & SLB code from Anshuman Khandual - add an inline function to update POWER8 HID0 from Gautham R. Shenoy - fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman - drop support for 64K local store on 4K kernels from Michael Ellerman - move dma_get_required_mask() from pnv_phb to pci_controller_ops from Andrew Donnellan - initialize distance lookup table from drconf path from Nikunj A Dadhania - enable RTC class support from Vaibhav Jain - disable automatically blocked PCI config from Gavin Shan - add LEDs driver for PowerNV platform from Vasant Hegde - fix endianness issues in the HVSI driver from Laurent Dufour - kexec endian fixes from Samuel Mendoza-Jonas - fix corrupted pdn list from Gavin Shan - fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan - Freescale updates from Scott: Highlights include 32-bit memcpy/memset optimizations, checksum optimizations, 85xx config fragments and updates, device tree updates, e6500 fixes for non-SMP, and misc cleanup and minor fixes. - a ton of cxl updates & fixes: - add explicit precision specifiers from Rasmus Villemoes - use more common format specifier from Rasmus Villemoes - destroy cxl_adapter_idr on module_exit from Johannes Thumshirn - destroy afu->contexts_idr on release of an afu from Johannes Thumshirn - compile with -Werror from Daniel Axtens - EEH support from Daniel Axtens - plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain - add alternate MMIO error handling from Ian Munsie - allow release of contexts which have been OPENED but not STARTED from Andrew Donnellan - remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar - release irqs if memory allocation fails from Vaibhav Jain - remove racy attempt to force EEH invocation in reset from Daniel Axtens - fix + cleanup error paths in cxl_dev_context_init from Ian Munsie - fix force unmapping mmaps of contexts allocated through the kernel api from Ian Munsie - set up and enable PSL Timebase from Philippe Bergheaud * tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits) cxl: Set up and enable PSL Timebase cxl: Fix force unmapping mmaps of contexts allocated through the kernel api cxl: Fix + cleanup error paths in cxl_dev_context_init powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail() powerpc/pseries: Cleanup on pci_dn_reconfig_notifier() powerpc/pseries: Fix corrupted pdn list powerpc/powernv: Enable LEDS support powerpc/iommu: Set default DMA offset in dma_dev_setup cxl: Remove racy attempt to force EEH invocation in reset cxl: Release irqs if memory allocation fails cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver powerpc/powernv: Reset HILE before kexec_sequence() powerpc/kexec: Reset secondary cpu endianness before kexec powerpc/hvsi: Fix endianness issues in the HVSI driver leds/powernv: Add driver for PowerNV platform powerpc/powernv: Create LED platform device powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states powerpc/powernv: Fix the log message when disabling VF cxl: Allow release of contexts which have been OPENED but not STARTED ... -
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM pcmcia updates from Russell King: "A series of changes updating the PXA and SA11x0 PCMCIA code to use devm_* APIs, and resolve some resource leaks in doing so. This results in a few small cleanups which are included in this set. FYI, the recommit of these today is to add Robert Jarzmik's reviewed-by tags, which I'd forgotten to add from mid-July" * 'pcmcia' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: pcmcia: soc_common: remove skt_dev_info's clk pointer pcmcia: sa11xx_base.c: remove useless init/exit functions pcmcia: sa1111: simplify clk handing in sa1111_pcmcia_add() pcmcia: sa1111: update socket driver to use devm_clk_get() API pcmcia: pxa2xx: convert memory allocation to devm_* API pcmcia: pxa2xx: update socket driver to use devm_clk_get() API pcmcia: sa11x0: convert memory allocation to devm_* API pcmcia: sa11x0: fix missing clk_put() in sa11x0 socket drivers
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM development updates from Russell King: "Included in this update: - moving PSCI code from ARM64/ARM to drivers/ - removal of some architecture internals from global kernel view - addition of software based "privileged no access" support using the old domains register to turn off the ability for kernel loads/stores to access userspace. Only the proper accessors will be usable. - addition of early fixup support for early console - re-addition (and reimplementation) of OMAP special interconnect barrier - removal of finish_arch_switch() - only expose cpuX/online in sysfs if hotpluggable - a number of code cleanups" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (41 commits) ARM: software-based priviledged-no-access support ARM: entry: provide uaccess assembly macro hooks ARM: entry: get rid of multiple macro definitions ARM: 8421/1: smp: Collapse arch_cpu_idle_dead() into cpu_die() ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore() ARM: mm: improve do_ldrd_abort macro ARM: entry: ensure that IRQs are enabled when calling syscall_trace_exit() ARM: entry: efficiency cleanups ARM: entry: get rid of asm_trace_hardirqs_on_cond ARM: uaccess: simplify user access assembly ARM: domains: remove DOMAIN_TABLE ARM: domains: keep vectors in separate domain ARM: domains: get rid of manager mode for user domain ARM: domains: move initial domain setting value to asm/domains.h ARM: domains: provide domain_mask() ARM: domains: switch to keeping domain value in register ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE ARM: 8417/1: refactor bitops functions with BIT_MASK() and BIT_WORD() ARM: 8416/1: Feroceon: use of_iomap() to map register base ARM: 8415/1: early fixmap support for earlycon ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Tooling fixes plus a handful of late arriving tooling changes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix link time error with sample_reg_masks on non x86 perf build: Fix Intel PT instruction decoder dependency problem perf dwarf: Fix potential array out of bounds access perf record: Add ability to name registers to record perf/x86: Add list of register names perf script: Enable printing of interrupted machine state perf evlist: Open event on evsel cpus and threads bpf tools: New API to get name from a BPF object perf tools: Fix build on powerpc broken by pt/bts
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking and atomic updates from Ingo Molnar: "Main changes in this cycle are: - Extend atomic primitives with coherent logic op primitives (atomic_{or,and,xor}()) and deprecate the old partial APIs (atomic_{set,clear}_mask()) The old ops were incoherent with incompatible signatures across architectures and with incomplete support. Now every architecture supports the primitives consistently (by Peter Zijlstra) - Generic support for 'relaxed atomics': - _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return() - atomic_read_acquire() - atomic_set_release() This came out of porting qwrlock code to arm64 (by Will Deacon) - Clean up the fragile static_key APIs that were causing repeat bugs, by introducing a new one: DEFINE_STATIC_KEY_TRUE(name); DEFINE_STATIC_KEY_FALSE(name); which define a key of different types with an initial true/false value. Then allow: static_branch_likely() static_branch_unlikely() to take a key of either type and emit the right instruction for the case. To be able to know the 'type' of the static key we encode it in the jump entry (by Peter Zijlstra) - Static key self-tests (by Jason Baron) - qrwlock optimizations (by Waiman Long) - small futex enhancements (by Davidlohr Bueso) - ... and misc other changes" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits) jump_label/x86: Work around asm build bug on older/backported GCCs locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics locking/qrwlock: Implement queue_write_unlock() using smp_store_release() locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t' locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic locking/static_keys: Make verify_keys() static jump label, locking/static_keys: Update docs locking/static_keys: Provide a selftest jump_label: Provide a self-test s390/uaccess, locking/static_keys: employ static_branch_likely() x86, tsc, locking/static_keys: Employ static_branch_likely() locking/static_keys: Add selftest locking/static_keys: Add a new static_key interface locking/static_keys: Rework update logic locking/static_keys: Add static_key_{en,dis}able() helpers ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "The major work includes fixing and enhancing the existing extent_cache feature, which has been well settling down so far and now it becomes a default mount option accordingly. Also, this version newly registers a f2fs memory shrinker to reclaim several objects consumed by a couple of data structures in order to avoid memory pressures. Another new feature is to add ioctl(F2FS_GARBAGE_COLLECT) which triggers a cleaning job explicitly by users. Most of the other patches are to fix bugs occurred in the corner cases across the whole code area" * tag 'for-f2fs-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (85 commits) f2fs: upset segment_info repair f2fs: avoid accessing NULL pointer in f2fs_drop_largest_extent f2fs: update extent tree in batches f2fs: fix to release inode correctly f2fs: handle f2fs_truncate error correctly f2fs: avoid unneeded initializing when converting inline dentry f2fs: atomically set inode->i_flags f2fs: fix wrong pointer access during try_to_free_nids f2fs: use __GFP_NOFAIL to avoid infinite loop f2fs: lookup neighbor extent nodes for merging later f2fs: split __insert_extent_tree_ret for readability f2fs: kill dead code in __insert_extent_tree f2fs: adjust showing of extent cache stat f2fs: add largest/cached stat in extent cache f2fs: fix incorrect mapping for bmap f2fs: add annotation for space utilization of regular/inline dentry f2fs: fix to update cached_en of extent tree properly f2fs: fix typo f2fs: check the node block address of newly allocated nid f2fs: go out for insert_inode_locked failure ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm updates from David Teigland: "This set mainly includes a change to the way the dlm uses the SCTP API in the kernel, removing the direct dependency on the sctp module. Other odd SCTP-related fixes are also included. The other notable fix is for a long standing regression in the behavior of lock value blocks for user space locks" * tag 'dlm-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: print error from kernel_sendpage dlm: fix lvb copy for user locks dlm: sctp_accept_from_sock() can be static dlm: fix reconnecting but not sending data dlm: replace BUG_ON with a less severe handling dlm: use sctp 1-to-1 API dlm: fix not reconnecting on connecting error handling dlm: fix race while closing connections dlm: fix connection stealing if using SCTP
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "Pretty much all bug fixes and clean ups for 4.3, after a lot of features and other churn going into 4.2" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: Revert "ext4: remove block_device_ejected" ext4: ratelimit the file system mounted message ext4: silence a format string false positive ext4: simplify some code in read_mmp_block() ext4: don't manipulate recovery flag when freezing no-journal fs jbd2: limit number of reserved credits ext4 crypto: remove duplicate header file ext4: update c/mtime on truncate up jbd2: avoid infinite loop when destroying aborted journal ext4, jbd2: add REQ_FUA flag when recording an error in the superblock ext4 crypto: fix spelling typo in comment ext4 crypto: exit cleanly if ext4_derive_key_aes() fails ext4: reject journal options for ext2 mounts ext4: implement cgroup writeback support ext4: replace ext4_io_submit->io_op with ->io_wbc ext4 crypto: check for too-short encrypted file names ext4 crypto: use a jbd2 transaction when adding a crypto policy jbd2: speedup jbd2_journal_dirty_metadata()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull ext3 removal, quota & udf fixes from Jan Kara: "The biggest change in the pull is the removal of ext3 filesystem driver (~28k lines removed). Ext4 driver is a full featured replacement these days and both RH and SUSE use it for several years without issues. Also there are some workarounds in VM & block layer mainly for ext3 which we could eventually get rid of. Other larger change is addition of proper error handling for dquot_initialize(). The rest is small fixes and cleanups" [ I wasn't convinced about the ext3 removal and worried about things falling through the cracks for legacy users, but ext4 maintainers piped up and were all unanimously in favor of removal, and maintaining all legacy ext3 support inside ext4. - Linus ] * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Don't modify filesystem for read-only mounts quota: remove an unneeded condition ext4: memory leak on error in ext4_symlink() mm/Kconfig: NEED_BOUNCE_POOL: clean-up condition ext4: Improve ext4 Kconfig test block: Remove forced page bouncing under IO fs: Remove ext3 filesystem driver doc: Update doc about journalling layer jfs: Handle error from dquot_initialize() reiserfs: Handle error from dquot_initialize() ocfs2: Handle error from dquot_initialize() ext4: Handle error from dquot_initialize() ext2: Handle error from dquot_initalize() quota: Propagate error from ->acquire_dquot()
-
Linus Torvalds authored
Merge hpfs upddate from Mikulas Patocka. * emailed patches from Mikulas Patocka <mikulas@twibright.com>: hpfs: update ctime and mtime on directory modification hpfs: support hotfixes
-
Mikulas Patocka authored
Update ctime and mtime when a directory is modified. (though OS/2 doesn't update them anyway) Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org # v3.3+ Signed-off-by:
-
Mikulas Patocka authored
When the OS/2 driver hits a disk write error, it writes the sector to another location and adds the sector mapping to the hotfix map. This patch makes the hpfs driver understand the hotfix map and remap accesses accoring to it. Signed-off-by:
Mikulas Patocka <mikulas@twibright.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ... -
Russell King authored
We no longer need to store the clk pointer in struct skt_dev_info as we no longer need to remember the clk pointer for the cleanup paths. Reviewed-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
A library module is not required to have module init/exit functions. Get rid of these unnecessary functions. Signed-off-by: -
Russell King authored
clk_get(dev, NULL) will always refer to the same clock, so it's pointless calling this multiple times for the same device. As we no longer have to worry about the cleanup (via use of devm_clk_get()) we can simplify sa1111_pcmcia_add() too. Signed-off-by: -
Russell King authored
Update the pxa2xx socket driver to use the devm_clk_get() API so that the cleanup paths are simplified. Signed-off-by: -
Russell King authored
Convert the pxa2xx socket driver memory allocation to use devm_kzalloc() to simplify the cleanup path. Reviewed-by:
-
Russell King authored
Update the pxa2xx socket driver to use the devm_clk_get() API so that the cleanup paths are simplified. Reviewed-by:
-
Russell King authored
Conflicts: drivers/perf/arm_pmu.c
-
Russell King authored
-
