- 29 Jul, 2020 40 commits
-
-
Palmer Dabbelt authored
[ Upstream commit 38b7c2a3 ] While digging through the recent mmiowb preemption issue it came up that we aren't actually preventing IO from crossing a scheduling boundary. While it's a bit ugly to overload smp_mb__after_spinlock() with this behavior, it's what PowerPC is doing so there's some precedent. Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Arnd Bergmann authored
[ Upstream commit 81e96851 ] The clang integrated assembler requires the 'cmp' instruction to have a length prefix here: arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl') cmp $0xffffffff,-24(%ebp) ^ Make this a 32-bit comparison, which it was clearly meant to be. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.deSigned-off-by:
-
Will Deacon authored
[ Upstream commit 5afc7855 ] Rather than open-code test_tsk_thread_flag() at each callsite, simply replace the couple of offenders with calls to test_tsk_thread_flag() directly. Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Cristian Marussi authored
[ Upstream commit 3ce17cd2 ] SMATCH detected a potential buffer overflow in the manipulation of hwmon_attributes array inside the scmi_hwmon_probe function: drivers/hwmon/scmi-hwmon.c:226 scmi_hwmon_probe() error: buffer overflow 'hwmon_attributes' 6 <= 9 Fix it by statically declaring the size of the array as the maximum possible as defined by hwmon_max define. Signed-off-by:
Cristian Marussi <cristian.marussi@arm.com> Reviewed-by:
Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20200715121338.GA18761@e119603-lin.cambridge.arm.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Chu Lin authored
[ Upstream commit 6d1d41c0 ] Issue: When PEC is enabled, binding adm1272 to the adm1275 would fail due to PEC error. See below: adm1275: probe of xxxx failed with error -74 Diagnosis: Per the datasheet of adm1272, adm1278, adm1293 and amd1294, PMON_CONFIG (0xd4) is 16bits wide. On the other hand, PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not assume everything is 8bits wide and read only 8bits from it. Solution: If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word. Else, use i2c_read_byte Testing: Binding adm1272 to the driver. The change is only tested on adm1272. Signed-off-by:
Chu Lin <linchuyuan@google.com> Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.comSigned-off-by:
-
Evgeny Novikov authored
[ Upstream commit c8f8529e ] gr_ep_init() does not assign the allocated request anywhere if allocation of memory for the buffer fails. This is a memory leak fixed by the given patch. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Ilya Katsnelson authored
[ Upstream commit dcb00fc7 ] Tested on my own laptop, touchpad feels slightly more responsive with this on, though it might just be placebo. Signed-off-by:
Ilya Katsnelson <me@0upti.me> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20200703143457.132373-1-me@0upti.meSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Leonid Ravich authored
[ Upstream commit 87730ccb ] DMA transaction time to completion is a function of PCI bandwidth, transaction size and a queue depth. So hard coded value for timeouts might be wrong for some scenarios. Signed-off-by:
Leonid Ravich <Leonid.Ravich@emc.com> Reviewed-by:
Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Evgeny Novikov authored
[ Upstream commit bc4071aa ] aspeed_create_fan() reads a pwm_port value using of_property_read_u32(). If pwm_port will be more than ARRAY_SIZE(pwm_port_params), there will be a buffer overflow in aspeed_create_pwm_port()->aspeed_set_pwm_port_enable(). The patch fixes the potential buffer overflow. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Marc Kleine-Budde authored
[ Upstream commit e84861fe ] This function is used by dev_get_regmap() to retrieve a regmap for the specified device. If the device has more than one regmap, the name parameter can be used to specify one. The code here uses a pointer comparison to check for equal strings. This however will probably always fail, as the regmap->name is allocated via kstrdup_const() from the regmap's config->name. Fix this by using strcmp() instead. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.deSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
leilk.liu authored
[ Upstream commit 44b37eb7 ] this patch use correct SPI_CFG2_REG offset. Signed-off-by:
leilk.liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20200701090020.7935-1-leilk.liu@mediatek.comSigned-off-by:
-
Merlijn Wajer authored
[ Upstream commit c463bb2a ] This event code represents the state of a removable cover of a device. Value 0 means that the cover is open or removed, value 1 means that the cover is closed. Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Merlijn Wajer <merlijn@wizzup.org> Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.orgSigned-off-by:
-
Dinghao Liu authored
[ Upstream commit 5b78fac4 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Hans de Goede authored
[ Upstream commit a5d81646 ] The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239) of the Apple Wireless Keyboard (2009 ANSI version) <sigh>. But its F1 - F10 keys are marked as sending F1 - F10, not the special functions hid-apple.c maps them too; and since its descriptors do not contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped to key-codes which have not been set in the keybit array causing them to not send any events at all. The lack of a usage code matching the Fn key in the clone is actually useful as this allows solving this problem in a generic way. This commits adds a fn_found flag and it adds a input_configured callback which checks if this flag is set once all usages have been mapped. If it is not set, then assume this is a clone and clear the quirks bitmap so that the hid-apple code does not add any special handling to this keyboard. This fixes F1 - F6 not sending anything at all and F7 - F12 sending the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on similar clones. Cc: Joao Moreno <mail@joaomoreno.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Rodrigo Rivas Costa authored
[ Upstream commit 2d3f53a8 ] Using uhid and KASAN this driver crashed because it was getting several connection events where it only expected one. Then the device was added several times to the static device list and it got corrupted. This patch checks if the device is already in the list before adding it. Signed-off-by:
Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Tested-by:
Siarhei Vishniakou <svv@google.com> Signed-off-by:
-
Caiyuan Xie authored
[ Upstream commit aa3c439c ] Add support for devices which that have reports with id == 2 Signed-off-by:
Caiyuan Xie <caiyuan.xie@cn.alps.com> Signed-off-by:
-
Federico Ricchiuto authored
[ Upstream commit 43e666ac ] The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Signed-off-by:
Federico Ricchiuto <fed.ricchiuto@gmail.com> Signed-off-by:
-
Stefano Garzarella authored
[ Upstream commit 7359608a ] Commit ed66f991 ("module: Refactor section attr into bin attribute") removed the 'name' field from 'struct module_sect_attr' triggering the following error when invoking lx-symbols: (gdb) lx-symbols loading vmlinux scanning for modules in linux/build loading @0xffffffffc014f000: linux/build/drivers/net/tun.ko Python Exception <class 'gdb.error'> There is no member named name.: Error occurred in Python: There is no member named name. This patch fixes the issue taking the module name from the 'struct attribute'. Fixes: ed66f991 ("module: Refactor section attr into bin attribute") Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by:
Kieran Bingham <kbingham@kernel.org> Link: http://lkml.kernel.org/r/20200722102239.313231-1-sgarzare@redhat.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Pi-Hsun Shih authored
[ Upstream commit d178770d ] Currently the basepath is removed only from the beginning of the string. When the symbol is inlined and there's multiple line outputs of addr2line, only the first line would have basepath removed. Change to remove the basepath prefix from all lines. Fixes: 31013836 ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex") Co-developed-by:
Shik Chen <shik@chromium.org> Signed-off-by:
Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Jiri Slaby <jslaby@suse.cz> Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.orgSigned-off-by:
-
Matthew Howell authored
[ Upstream commit 5fdbe136 ] Sealevel XR17V35X based devices are inoperable on kernel versions 4.11 and above due to a change in the GPIO preconfiguration introduced in commit 7dea8165. This patch fixes this by preconfiguring the GPIO on Sealevel cards to the value (0x00) used prior to commit 7dea8165 With GPIOs preconfigured as per commit 7dea8165 all ports on Sealevel XR17V35X based devices become stuck in high impedance mode, regardless of dip-switch or software configuration. This causes the device to become effectively unusable. This patch (in various forms) has been distributed to our customers and no issues related to it have been reported. Fixes: 7dea8165 ("serial: exar: Preconfigure xr17v35x MPIOs as output") Signed-off-by:
Matthew Howell <matthew.howell@sealevel.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2007221605270.13247@tstest-VirtualBoxSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Cong Wang authored
[ Upstream commit c75d1d52 ] Very similar to commit 544f287b ("bonding: check error value of register_netdevice() immediately"), we should immediately check the return value of register_netdevice() before doing anything else. Fixes: 005db31d ("bonding: set carrier off for devices created through netlink") Reported-and-tested-by: syzbot+bbc3a11c4da63c1b74d6@syzkaller.appspotmail.com Cc: Beniamino Galvani <bgalvani@redhat.com> Cc: Taehee Yoo <ap420073@gmail.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit eb015971 ] On R-Car Gen2, we get a timeout when reading from the address set in ICSAR, even though the slave interface is disabled. Clearing it fixes this situation. Note that Gen3 is not affected. To reproduce: bind and undbind an I2C slave on some bus, run 'i2cdetect' on that bus. Fixes: de20d185 ("i2c: rcar: add slave support") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Wang Hai authored
[ Upstream commit 1264d7fa ] When regmap_update_bits failed in ave_init(), calls of the functions reset_control_assert() and clk_disable_unprepare() were missed. Add goto out_reset_assert to do this. Fixes: 57878f2f ("net: ethernet: ave: add support for phy-mode setting of system controller") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Reviewed-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
-
guodeqing authored
[ Upstream commit 8210e344 ] The sync_thread_backup only checks sk_receive_queue is empty or not, there is a situation which cannot sync the connection entries when sk_receive_queue is empty and sk_rmem_alloc is larger than sk_rcvbuf, the sync packets are dropped in __udp_enqueue_schedule_skb, this is because the packets in reader_queue is not read, so the rmem is not reclaimed. Here I add the check of whether the reader_queue of the udp sock is empty or not to solve this problem. Fixes: 2276f58a ("udp: use a separate rx queue for packet reception") Reported-by:
zhouxudong <zhouxudong8@huawei.com> Signed-off-by:
guodeqing <geffrey.guo@huawei.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Alexander Lobakin authored
[ Upstream commit 1ea99903 ] Change the verbosity of the "don't support RoCE & iWARP simultaneously" warning to debug level to stop flooding on driver/hardware initialization: [ 4.783230] qede 01:00.00: Storm FW 8.37.7.0, Management FW 8.52.9.0 [MBI 15.10.6] [eth0] [ 4.810020] [qed_rdma_set_pf_params:2076()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only [ 4.861186] qede 01:00.01: Storm FW 8.37.7.0, Management FW 8.52.9.0 [MBI 15.10.6] [eth1] [ 4.893311] [qed_rdma_set_pf_params:2076()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only [ 5.181713] qede a1:00.00: Storm FW 8.37.7.0, Management FW 8.52.9.0 [MBI 15.10.6] [eth2] [ 5.224740] [qed_rdma_set_pf_params:2076()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only [ 5.276449] qede a1:00.01: Storm FW 8.37.7.0, Management FW 8.52.9.0 [MBI 15.10.6] [eth3] [ 5.318671] [qed_rdma_set_pf_params:2076()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only [ 5.369548] qede a1:00.02: Storm FW 8.37.7.0, Management FW 8.52.9.0 [MBI 15.10.6] [eth4] [ 5.411645] [qed_rdma_set_pf_params:2076()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only Fixes: e0a8f9de ("qed: Add iWARP enablement support") Signed-off-by:
Alexander Lobakin <alobakin@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Liu Jian authored
[ Upstream commit 5dbaeb87 ] When mlxsw_core_trap_register fails in mlxsw_emad_init, destroy_workqueue() shouled be called to destroy mlxsw_core->emad_wq. Fixes: d965465b ("mlxsw: core: Fix possible deadlock") Signed-off-by:
Liu Jian <liujian56@huawei.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 544f287b ] If register_netdevice() is failed, net_device should not be used because variables are uninitialized or freed. So, the routine should be stopped immediately. But, bond_create() doesn't check return value of register_netdevice() immediately. That will result in a panic because of using uninitialized or freed memory. Test commands: modprobe netdev-notifier-error-inject echo -22 > /sys/kernel/debug/notifier-error-inject/netdev/\ actions/NETDEV_REGISTER/error modprobe bonding max_bonds=3 Splat looks like: [ 375.028492][ T193] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [ 375.033207][ T193] CPU: 2 PID: 193 Comm: kworker/2:2 Not tainted 5.8.0-rc4+ #645 [ 375.036068][ T193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 375.039673][ T193] Workqueue: events linkwatch_event [ 375.041557][ T193] RIP: 0010:dev_activate+0x4a/0x340 [ 375.043381][ T193] Code: 40 a8 04 0f 85 db 00 00 00 8b 83 08 04 00 00 85 c0 0f 84 0d 01 00 00 31 d2 89 d0 48 8d 04 40 48 c1 e0 07 48 03 83 00 04 00 00 <48> 8b 48 10 f6 41 10 01 75 08 f0 80 a1 a0 01 00 00 fd 48 89 48 08 [ 375.050267][ T193] RSP: 0018:ffff9f8facfcfdd8 EFLAGS: 00010202 [ 375.052410][ T193] RAX: 6b6b6b6b6b6b6b6b RBX: ffff9f8fae6ea000 RCX: 0000000000000006 [ 375.055178][ T193] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f8fae6ea000 [ 375.057762][ T193] RBP: ffff9f8fae6ea000 R08: 0000000000000000 R09: 0000000000000000 [ 375.059810][ T193] R10: 0000000000000001 R11: 0000000000000000 R12: ffff9f8facfcfe08 [ 375.061892][ T193] R13: ffffffff883587e0 R14: 0000000000000000 R15: ffff9f8fae6ea580 [ 375.063931][ T193] FS: 0000000000000000(0000) GS:ffff9f8fbae00000(0000) knlGS:0000000000000000 [ 375.066239][ T193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 375.067841][ T193] CR2: 00007f2f542167a0 CR3: 000000012cee6002 CR4: 00000000003606e0 [ 375.069657][ T193] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 375.071471][ T193] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 375.073269][ T193] Call Trace: [ 375.074005][ T193] linkwatch_do_dev+0x4d/0x50 [ 375.075052][ T193] __linkwatch_run_queue+0x10b/0x200 [ 375.076244][ T193] linkwatch_event+0x21/0x30 [ 375.077274][ T193] process_one_work+0x252/0x600 [ 375.078379][ T193] ? process_one_work+0x600/0x600 [ 375.079518][ T193] worker_thread+0x3c/0x380 [ 375.080534][ T193] ? process_one_work+0x600/0x600 [ 375.081668][ T193] kthread+0x139/0x150 [ 375.082567][ T193] ? kthread_park+0x90/0x90 [ 375.083567][ T193] ret_from_fork+0x22/0x30 Fixes: e826eafa ("bonding: Call netif_carrier_off after register_netdevice") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Wang Hai authored
[ Upstream commit bca9749b ] If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev) should be called to free the ndev created earlier. Otherwise, a memleak will occur. Fixes: 7d2911c4 ("net: smc91x: Fix gpios for device tree based booting") Reported-by:
-
Chen-Yu Tsai authored
[ Upstream commit baa1841e ] When the extra HPD polling in sun4i_hdmi was removed, the result of HPD was accidentally inverted. Fix this by inverting the check. Fixes: bda8eaa6 ("drm: sun4i: hdmi: Remove extra HPD polling") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Tested-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200711011030.21997-1-wens@kernel.orgSigned-off-by:
-
Liu Jian authored
[ Upstream commit 66673f96 ] When probe fail, we should destroy the workqueue. Fixes: 2795e8c2 ("net: ieee802154: fix a potential NULL pointer dereference") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20200717090121.2143-1-liujian56@huawei.comSigned-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Sergey Organov authored
[ Upstream commit 473309fb ] From Documentation/networking/timestamping.txt: A driver which supports hardware time stamping shall update the struct with the actual, possibly more permissive configuration. Do update the struct passed when we upscale the requested time stamping mode. Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by:
Sergey Organov <sorganov@gmail.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
George Kennedy authored
[ Upstream commit c28d9a28 ] If ax88172a_unbind() fails, make sure that the return code is less than zero so that cleanup is done properly and avoid UAF. Fixes: a9a51bd7 ("ax88172a: fix information leak on short answers") Signed-off-by:
George Kennedy <george.kennedy@oracle.com> Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 3195c470 ] The size used when calling 'pci_alloc_consistent()' and 'pci_free_consistent()' should match. Fix it and have it consistent with the corresponding call in 'rr_close()'. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Matthew Gerlach authored
[ Upstream commit 8614afd6 ] When putting the port in reset, driver must wait for the soft reset acknowledgment bit instead of the soft reset bit. Fixes: 47c1b19c (fpga: dfl: afu: add port ops support) Signed-off-by:
Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by:
Xu Yilun <yilun.xu@intel.com> Acked-by:
Wu Hao <hao.wu@intel.com> Reviewed-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
-
Vasundhara Volam authored
[ Upstream commit 163e9ef6 ] The driver was modified to not rely on rtnl lock to protect link settings about 2 years ago. The pause setting was missed when making that change. Fix it by acquiring link_lock mutex before calling bnxt_hwrm_set_pause(). Fixes: e2dc9b6e ("bnxt_en: Don't use rtnl lock to protect link change logic in workqueue.") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Robbie Ko authored
commit 5909ca11 upstream. When locking pages for delalloc, we check if it's dirty and mapping still matches. If it does not match, we need to return -EAGAIN and release all pages. Only the current page was put though, iterate over all the remaining pages too. CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Robbie Ko <robbieko@synology.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Boris Burkov authored
commit 48cfa61b upstream. It is possible to cause a btrfs mount to fail by racing it with a slow umount. The crux of the sequence is generic_shutdown_super not yet calling sop->put_super before btrfs_mount_root calls btrfs_open_devices. If that occurs, btrfs_open_devices will decide the opened counter is non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to 0. From here, mount will call sget which will result in grab_super trying to take the super block umount semaphore. That semaphore will be held by the slow umount, so mount will block. Before up-ing the semaphore, umount will delete the super block, resulting in mount's sget reliably allocating a new one, which causes the mount path to dutifully fill it out, and increment total_rw_bytes a second time, which causes the mount to fail, as we see double the expected bytes. Here is the sequence laid out in greater detail: CPU0 CPU1 down_write sb->s_umount btrfs_kill_super kill_anon_super(sb) generic_shutdown_super(sb); shrink_dcache_for_umount(sb); sync_filesystem(sb); evict_inodes(sb); // SLOW btrfs_mount_root btrfs_scan_one_device fs_devices = device->fs_devices fs_info->fs_devices = fs_devices // fs_devices-opened makes this a no-op btrfs_open_devices(fs_devices, mode, fs_type) s = sget(fs_type, test, set, flags, fs_info); find sb in s_instances grab_super(sb); down_write(&s->s_umount); // blocks sop->put_super(sb) // sb->fs_devices->opened == 2; no-op spin_lock(&sb_lock); hlist_del_init(&sb->s_instances); spin_unlock(&sb_lock); up_write(&sb->s_umount); return 0; retry lookup don't find sb in s_instances (deleted by CPU0) s = alloc_super return s; btrfs_fill_super(s, fs_devices, data) open_ctree // fs_devices total_rw_bytes improperly set! btrfs_read_chunk_tree read_one_dev // increment total_rw_bytes again!! super_total_bytes < fs_devices->total_rw_bytes // ERROR!!! To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree before the calls to read_one_dev, while holding the sb umount semaphore and the uuid mutex. To reproduce, it is sufficient to dirty a decent number of inodes, then quickly umount and mount. for i in $(seq 0 500) do dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1 done umount /mnt/foo& mount /mnt/foo does the trick for me. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Boris Burkov <boris@bur.io> Reviewed-by:
-
Filipe Manana authored
commit 580c079b upstream. At btrfs_find_all_roots_safe() we allocate a ulist and set the **roots argument to point to it. However if later we fail due to an error returned by find_parent_nodes(), we free that ulist but leave a dangling pointer in the **roots argument. Upon receiving the error, a caller of this function can attempt to free the same ulist again, resulting in an invalid memory access. One such scenario is during qgroup accounting: btrfs_qgroup_account_extents() --> calls btrfs_find_all_roots() passes &new_roots (a stack allocated pointer) to btrfs_find_all_roots() --> btrfs_find_all_roots() just calls btrfs_find_all_roots_safe() passing &new_roots to it --> allocates ulist and assigns its address to **roots (which points to new_roots from btrfs_qgroup_account_extents()) --> find_parent_nodes() returns an error, so we free the ulist and leave **roots pointing to it after returning --> btrfs_qgroup_account_extents() sees btrfs_find_all_roots() returned an error and jumps to the label 'cleanup', which just tries to free again the same ulist Stack trace example: ------------[ cut here ]------------ BTRFS: tree first key check failed WARNING: CPU: 1 PID: 1763215 at fs/btrfs/disk-io.c:422 btrfs_verify_level_key+0xe0/0x180 [btrfs] Modules linked in: dm_snapshot dm_thin_pool (...) CPU: 1 PID: 1763215 Comm: fsstress Tainted: G W 5.8.0-rc3-btrfs-next-64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:btrfs_verify_level_key+0xe0/0x180 [btrfs] Code: 28 5b 5d (...) RSP: 0018:ffffb89b473779a0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff90397759bf08 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff RBP: ffff9039a419c000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffb89b43301000 R12: 000000000000005e R13: ffffb89b47377a2e R14: ffffb89b473779af R15: 0000000000000000 FS: 00007fc47e1e1000(0000) GS:ffff9039ac200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc47e1df000 CR3: 00000003d9e4e001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: read_block_for_search+0xf6/0x350 [btrfs] btrfs_next_old_leaf+0x242/0x650 [btrfs] resolve_indirect_refs+0x7cf/0x9e0 [btrfs] find_parent_nodes+0x4ea/0x12c0 [btrfs] btrfs_find_all_roots_safe+0xbf/0x130 [btrfs] btrfs_qgroup_account_extents+0x9d/0x390 [btrfs] btrfs_commit_transaction+0x4f7/0xb20 [btrfs] btrfs_sync_file+0x3d4/0x4d0 [btrfs] do_fsync+0x38/0x70 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc47e2d72e3 Code: Bad RIP value. RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0 softirqs last enabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace 8639237550317b48 ]--- BTRFS error (device sdc): tree first key mismatch detected, bytenr=62324736 parent_transid=94 key expected=(262,108,1351680) has=(259,108,1921024) general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 1763215 Comm: fsstress Tainted: G W 5.8.0-rc3-btrfs-next-64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ulist_release+0x14/0x60 [btrfs] Code: c7 07 00 (...) RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840 FS: 00007fc47e1e1000(0000) GS:ffff9039ac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8c1c0a51c8 CR3: 00000003d9e4e004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ulist_free+0x13/0x20 [btrfs] btrfs_qgroup_account_extents+0xf3/0x390 [btrfs] btrfs_commit_transaction+0x4f7/0xb20 [btrfs] btrfs_sync_file+0x3d4/0x4d0 [btrfs] do_fsync+0x38/0x70 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc47e2d72e3 Code: Bad RIP value. RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50 Modules linked in: dm_snapshot dm_thin_pool (...) ---[ end trace 8639237550317b49 ]--- RIP: 0010:ulist_release+0x14/0x60 [btrfs] Code: c7 07 00 (...) RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840 FS: 00007fc47e1e1000(0000) GS:ffff9039ad200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6a776f7d40 CR3: 00000003d9e4e002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fix this by making btrfs_find_all_roots_safe() set *roots to NULL after it frees the ulist. Fixes: 8da6d581 ("Btrfs: added btrfs_find_all_roots()") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Hans de Goede authored
commit 5cacc6f5 upstream. The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage, so the correct mask is 0x7 not 0x3. Because of this wrong mask we were programming the ldo bits to a setting of binary 001 (0x05 & 0x03) instead of binary 101 when moving to SND_SOC_BIAS_PREPARE. According to the datasheet 001 is a reserved value, so no idea what it did, since the driver was working fine before I guess we got lucky and it does something which is ok. Fixes: 5e8351de ("ASoC: add RT5670 CODEC driver") Signed-off-by:
-
Takashi Iwai authored
commit 60379ba0 upstream. snd_info_get_line() has a sanity check of NULL buffer -- both buffer itself being NULL and buffer->buffer being NULL. Basically both checks are valid and necessary, but the problem is that it's with snd_BUG_ON() macro that triggers WARN_ON(). The latter condition (NULL buffer->buffer) can be met arbitrarily by user since the buffer is allocated at the first write, so it means that user can trigger WARN_ON() at will. This patch addresses it by simply moving buffer->buffer NULL check out of snd_BUG_ON() so that spurious WARNING is no longer triggered. Reported-by: syzbot+e42d0746c3c3699b6061@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200717084023.5928-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
