Add micro-USB connector under "muic" node to properly represent the
hardware.  Deprecate also the old "max77693-muic" in favor of generic
"muic" (this is max77693, so there is no need to state it in its child
nodes).  This "muic" node is used only to instantiate MUIC driver by
compatible, thus actual Linux driver changes are needed.  Extend the
example with this new code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230723142842.98204-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Lee Jones <lee@kernel.org>

Add micro-USB connector to properly represent the hardware.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230723070715.34650-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Lee Jones <lee@kernel.org>

The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the
individual client drivers even when the MFD portion is disabled but gets it
wrong, causing a link failure when the core is in a loadable module but the
other drivers are built-in:

x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply':
pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write'
x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable'

arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get':
rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read'

It seems better not to add the extra complexity here but instead just use
a normal hard dependency, so remove the #else portion in the header along
with the "|| COMPILE_TEST". This could also be fixed by having slightly more
elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper,
but in practice it's already possible to compile-test all these drivers
by enabling the mtd portion.

Fixes: 254d3a72 ("pwm: Add Renesas RZ/G2L MTU3a PWM driver")
Fixes: 0be89073 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Fixes: 654c293e ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230719090430.1925182-1-arnd@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

As &chip->pm_irq_lock is acquired by pm8xxx_irq_handler() under irq
context, other process context code should disable irq before acquiring
the lock.

Since .irq_set_type and .irq_get_irqchip_state callbacks are generally
executed from process context without irq disabled by default, the same
lock acquision should disable irq.

Possible deadlock scenario
pm8xxx_irq_set_type()
    -> pm8xxx_config_irq()
    -> spin_lock(&chip->pm_irq_lock)
        <irq interrupt>
        -> pm8xxx_irq_handler()
        -> pm8xxx_irq_master_handler()
        -> pm8xxx_irq_block_handler()
        -> pm8xxx_read_block_irq()
        -> spin_lock(&chip->pm_irq_lock) (deadlock here)

This flaw was found using an experimental static analysis tool we are
developing for irq-related deadlock.

Fix the potential deadlock by spin_lock_irqsave().
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230720071330.50382-1-dg573847474@gmail.comSigned-off-by: Lee Jones <lee@kernel.org>

Document qcom,pmc8180 and qcom,pmc8180c compatibles already used in DTS:

  sc8180x-primus.dtb: pmic@1: compatible:0: 'qcom,pmc8180' is not one of ...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230720083525.73622-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Lee Jones <lee@kernel.org>

Since commit b0e84624 ("mfd: db8500-prcmu: Remove dead code for a non-existing config")
these inline helpers also no need any more.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230720143738.13996-1-yuehaibing@huawei.comSigned-off-by: Lee Jones <lee@kernel.org>

When (MFD) RZ_MTU3=m and PWM_RZ_MTU3=y, It hits the below error
aarch64-linux-gnu-ld: rz-mtu3.c:(.text+0x544): undefined reference to `mfd_remove_devices'

Fix this issue by selecting MFD_CORE.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: https://lore.kernel.org/linux-pwm/20230718090023.wo6m6ffzaifgctkj@pengutronix.de/Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230718134314.118333-1-biju.das.jz@bp.renesas.comSigned-off-by: Lee Jones <lee@kernel.org>

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174731.4059811-1-robh@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the wm8998 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-11-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the wm8997 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-10-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the wm8994 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-9-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the wm5110 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-8-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the wm5102 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-7-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the cs47l92 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-6-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the cs47l90 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-5-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the cs47l85 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-4-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the cs47l35 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-3-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the cs47l24 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-2-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the cs47l15 driver to use the more modern data structure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-mfd-cirrus-maple-v1-1-16dacae402a8@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.  Also absolute path
starting with /schemas is preferred.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230713065040.7968-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Lee Jones <lee@kernel.org>

Now that it's been converted to YAML, reference the PM8916 wcd codec
schema.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-6-6b4b6cd081e5@linaro.orgSigned-off-by: Lee Jones <lee@kernel.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.

Update the axp20x driver to use the more modern data structure, really it
should have been fine even without the most recent round of updates.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712-mfd-axp20x-maple-v1-1-4df3749107a6@kernel.orgSigned-off-by: Lee Jones <lee@kernel.org>

Add new compatible string for the XLCD controller on sam9x75 variant
of the SAM9X7 SoC family.
The XLCD controller in sam9x75 variant supports interfacing with
LVDS and MIPI-DSI and parallel port RGB.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230712024017.218921-2-manikandan.m@microchip.comSigned-off-by: Lee Jones <lee@kernel.org>

Modified Kconfig to enable module build support for RZ/G2L MTU3a driver.
While at it, added module.h header file.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230711092841.119161-1-biju.das.jz@bp.renesas.comSigned-off-by: Lee Jones <lee@kernel.org>

This converts the STMPE MFD device tree bindings to the YAML
schema.

Reference the existing schema for the ADC, just define the
other subnode schemas directly in the MFD schema.

Add two examples so we have examples covering both the simple
GPIO expander and the more complex with ADC and touchscreen.

Some in-tree users do not follow the naming conventions for nodes
so these DTS files need to be augmented to use proper node names
like "adc", "pwm", "gpio", "keyboard-controller" etc before the
bindings take effect on them.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230709-stmpe-dt-bindings-v5-1-34a3d6ee1e57@linaro.orgSigned-off-by: Lee Jones <lee@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230706113939.1178-7-frank.li@vivo.comSigned-off-by: Lee Jones <lee@kernel.org>

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230706113939.1178-6-frank.li@vivo.comSigned-off-by: Lee Jones <lee@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230706113939.1178-5-frank.li@vivo.comSigned-off-by: Lee Jones <lee@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230706113939.1178-4-frank.li@vivo.comSigned-off-by: Lee Jones <lee@kernel.org>

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230706113939.1178-3-frank.li@vivo.comSigned-off-by: Lee Jones <lee@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230706113939.1178-2-frank.li@vivo.comSigned-off-by: Lee Jones <lee@kernel.org>

Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230706113939.1178-1-frank.li@vivo.comSigned-off-by: Lee Jones <lee@kernel.org>

There is no reason for MFD_RK8XX to be bool, all drivers that depend on
it, or that select it, are tristate.

Fixes: c20e8c5b ("mfd: rk808: Split into core and i2c")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/d132363fc9228473e9e652b70a3761b94de32d70.1688475844.git.geert+renesas@glider.beSigned-off-by: Lee Jones <lee@kernel.org>

Add compatible for pmic pmx75 used in Snapdragon series.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1688395346-3126-6-git-send-email-quic_rohiagar@quicinc.comSigned-off-by: Lee Jones <lee@kernel.org>

Add compatible for pmic pm7550ba used in Snapdragon series.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1688395346-3126-4-git-send-email-quic_rohiagar@quicinc.comSigned-off-by: Lee Jones <lee@kernel.org>

The kernel already has a helper to print a hexdump of a small
buffer via pointer extension. Use that instead of open coded
variant.

In long term it helps to kill pr_cont() or at least narrow down
its use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703140923.2840-1-andriy.shevchenko@linux.intel.comSigned-off-by: Lee Jones <lee@kernel.org>

Immutable branch between MFD, Pinctrl and soundwire due for the v6.6 merge window

Immutable branch between MFD and Regulator due for the v6.6 merge window

This commit prepares a following commit for the regulator part of the MFD.
The driver should support different device chips that differ in their
register definitions, for instance to control LDOA1 and SWB2.
So it is necessary to use a dedicated regulator description for a
specific device variant. Thus, the content from DEVICEID Register 1 is
used to choose a dedicated configuration between the different device
variants.
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20230818083721.29790-2-andre.werner@systec-electronic.comSigned-off-by: Lee Jones <lee@kernel.org>

The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.

Add a basic pinctrl driver which supports driver strength for the
various pins, gpios, and pinmux for the 2 multi-function pins.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-5-ckeepax@opensource.cirrus.comSigned-off-by: Lee Jones <lee@kernel.org>

The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.

The MFD component registers and initialises the device and provides
PM/system power management.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-4-ckeepax@opensource.cirrus.comSigned-off-by: Lee Jones <lee@kernel.org>