- 11 Aug, 2017 40 commits
-
-
Ard Biesheuvel authored
[ Upstream commit f073bdc5 ] The VM_BUG_ON() check in move_freepages() checks whether the node id of a page matches the node id of its zone. However, it does this before having checked whether the struct page pointer refers to a valid struct page to begin with. This is guaranteed in most cases, but may not be the case if CONFIG_HOLES_IN_ZONE=y. So reorder the VM_BUG_ON() with the pfn_valid_within() check. Link: http://lkml.kernel.org/r/1481706707-6211-2-git-send-email-ard.biesheuvel@linaro.orgSigned-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: Robert Richter <rrichter@cavium.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jamie Iles authored
[ Upstream commit 2d39b3cd ] Since commit 00cd5c37 ("ptrace: permit ptracing of /sbin/init") we can now trace init processes. init is initially protected with SIGNAL_UNKILLABLE which will prevent fatal signals such as SIGSTOP, but there are a number of paths during tracing where SIGNAL_UNKILLABLE can be implicitly cleared. This can result in init becoming stoppable/killable after tracing. For example, running: while true; do kill -STOP 1; done & strace -p 1 and then stopping strace and the kill loop will result in init being left in state TASK_STOPPED. Sending SIGCONT to init will resume it, but init will now respond to future SIGSTOP signals rather than ignoring them. Make sure that when setting SIGNAL_STOP_CONTINUED/SIGNAL_STOP_STOPPED that we don't clear SIGNAL_UNKILLABLE. Link: http://lkml.kernel.org/r/20170104122017.25047-1-jamie.iles@oracle.comSigned-off-by: Jamie Iles <jamie.iles@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sudip Mukherjee authored
[ Upstream commit da0510c4 ] The build of frv allmodconfig was failing with the errors like: /tmp/cc0JSPc3.s: Assembler messages: /tmp/cc0JSPc3.s:1839: Error: symbol `.LSLT0' is already defined /tmp/cc0JSPc3.s:1842: Error: symbol `.LASLTP0' is already defined /tmp/cc0JSPc3.s:1969: Error: symbol `.LELTP0' is already defined /tmp/cc0JSPc3.s:1970: Error: symbol `.LELT0' is already defined Commit 866ced95 ("kbuild: Support split debug info v4") introduced splitting the debug info and keeping that in a separate file. Somehow, the frv-linux gcc did not like that and I am guessing that instead of splitting it started copying. The first report about this is at: https://lists.01.org/pipermail/kbuild-all/2015-July/010527.html. I will try and see if this can work with frv and if still fails I will open a bug report with gcc. But meanwhile this is the easiest option to solve build failure of frv. Fixes: 866ced95 ("kbuild: Support split debug info v4") Link: http://lkml.kernel.org/r/1482062348-5352-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Hocko authored
[ Upstream commit bb1107f7 ] Andrey Konovalov has reported the following warning triggered by the syzkaller fuzzer. WARNING: CPU: 1 PID: 9935 at mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 9935 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __alloc_pages_slowpath mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20 mm/page_alloc.c:3781 alloc_pages_current+0x1c7/0x6b0 mm/mempolicy.c:2072 alloc_pages include/linux/gfp.h:469 kmalloc_order+0x1f/0x70 mm/slab_common.c:1015 kmalloc_order_trace+0x1f/0x160 mm/slab_common.c:1026 kmalloc_large include/linux/slab.h:422 __kmalloc+0x210/0x2d0 mm/slub.c:3723 kmalloc include/linux/slab.h:495 ep_write_iter+0x167/0xb50 drivers/usb/gadget/legacy/inode.c:664 new_sync_write fs/read_write.c:499 __vfs_write+0x483/0x760 fs/read_write.c:512 vfs_write+0x170/0x4e0 fs/read_write.c:560 SYSC_write fs/read_write.c:607 SyS_write+0xfb/0x230 fs/read_write.c:599 entry_SYSCALL_64_fastpath+0x1f/0xc2 The issue is caused by a lack of size check for the request size in ep_write_iter which should be fixed. It, however, points to another problem, that SLUB defines KMALLOC_MAX_SIZE too large because the its KMALLOC_SHIFT_MAX is (MAX_ORDER + PAGE_SHIFT) which means that the resulting page allocator request might be MAX_ORDER which is too large (see __alloc_pages_slowpath). The same applies to the SLOB allocator which allows even larger sizes. Make sure that they are capped properly and never request more than MAX_ORDER order. Link: http://lkml.kernel.org/r/20161220130659.16461-2-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rabin Vincent authored
[ Upstream commit 270c8cf1 ] ARM has a few system calls (most notably mmap) for which the names of the functions which are referenced in the syscall table do not match the names of the syscall tracepoints. As a consequence of this, these tracepoints are not made available. Implement arch_syscall_match_sym_name to fix this and allow tracing even these system calls. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Omar Sandoval authored
[ Upstream commit 6bf6b0aa ] If blk_mq_init_queue() returns an error, it gets assigned to vblk->disk->queue. Then, when we call put_disk(), we end up calling blk_put_queue() with the ERR_PTR, causing a bad dereference. Fix it by only assigning to vblk->disk->queue on success. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gerd Hoffmann authored
[ Upstream commit 71d3f6ef ] virtio uses normal ram as backing storage for the framebuffer, so we should assign the address to new screen_buffer (added by commit 17a7b0b4) instead of screen_base. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Milan P. Gandhi authored
[ Upstream commit c7702b8c ] There is a race condition with qla2xxx optrom functions where one thread might modify optrom buffer, optrom_state while other thread is still reading from it. In couple of crashes, it was found that we had successfully passed the following 'if' check where we confirm optrom_state to be QLA_SREADING. But by the time we acquired mutex lock to proceed with memory_read_from_buffer function, some other thread/process had already modified that option rom buffer and optrom_state from QLA_SREADING to QLA_SWAITING. Then we got ha->optrom_buffer 0x0 and crashed the system: if (ha->optrom_state != QLA_SREADING) return 0; mutex_lock(&ha->optrom_mutex); rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer, ha->optrom_region_size); mutex_unlock(&ha->optrom_mutex); With current optrom function we get following crash due to a race condition: [ 1479.466679] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1479.466707] IP: [<ffffffff81326756>] memcpy+0x6/0x110 [...] [ 1479.473673] Call Trace: [ 1479.474296] [<ffffffff81225cbc>] ? memory_read_from_buffer+0x3c/0x60 [ 1479.474941] [<ffffffffa01574dc>] qla2x00_sysfs_read_optrom+0x9c/0xc0 [qla2xxx] [ 1479.475571] [<ffffffff8127e76b>] read+0xdb/0x1f0 [ 1479.476206] [<ffffffff811fdf9e>] vfs_read+0x9e/0x170 [ 1479.476839] [<ffffffff811feb6f>] SyS_read+0x7f/0xe0 [ 1479.477466] [<ffffffff816964c9>] system_call_fastpath+0x16/0x1b Below patch modifies qla2x00_sysfs_read_optrom, qla2x00_sysfs_write_optrom functions to get the mutex_lock before checking ha->optrom_state to avoid similar crashes. The patch was applied and tested and same crashes were no longer observed again. Tested-by: Milan P. Gandhi <mgandhi@redhat.com> Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zefir Kurtisi authored
[ Upstream commit 811a9191 ] While in RUNNING state, phy_state_machine() checks for link changes by comparing phydev->link before and after calling phy_read_status(). This works as long as it is guaranteed that phydev->link is never changed outside the phy_state_machine(). If in some setups this happens, it causes the state machine to miss a link loss and remain RUNNING despite phydev->link being 0. This has been observed running a dsa setup with a process continuously polling the link states over ethtool each second (SNMPD RFC-1213 agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to call phy_read_status() and with that modify the link status - and with that bricking the phy state machine. This patch adds a fail-safe check while in RUNNING, which causes to move to CHANGELINK when the link is gone and we are still RUNNING. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Mc Guire authored
[ Upstream commit fac69d0e ] Add the missing declarations of basic string functions to string.h to allow a clean build. Fixes: 5be86566 ("String-handling functions for the new x86 setup code.") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Link: http://lkml.kernel.org/r/1483781911-21399-1-git-send-email-hofrat@osadl.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Chan authored
[ Upstream commit f5992b72 ] The driver's ndo_get_stats64() method is not always called under RTNL. So it can race with driver close or ethtool reconfigurations. Fix the race condition by taking tp->lock spinlock in tg3_free_consistent() when freeing the tp->hw_stats memory block. tg3_get_stats64() is already taking tp->lock. Reported-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Grygorii Strashko authored
[ Upstream commit 5ca7d1ca ] For proper IRQ generation by DP83867 phy the INT/PWDN pin has to be programmed as an interrupt output instead of a Powerdown input in Configuration Register 3 (CFG3), Address 0x001E, bit 7 INT_OE = 1. The current driver doesn't do this and as result IRQs will not be generated by DP83867 phy even if they are properly configured in DT. Hence, fix IRQ generation by properly configuring CFG3.INT_OE bit and ensure that Link Status Change (LINK_STATUS_CHNG_INT) and Auto-Negotiation Complete (AUTONEG_COMP_INT) interrupt are enabled. After this the DP83867 driver will work properly in interrupt enabled mode. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergei Shtylyov authored
[ Upstream commit 0f1f9cbc ] The R8A7740 GEther controller supports the packet checksum offloading but the 'hw_crc' (bad name, I'll fix it) flag isn't set in the R8A7740 data, thus CSMR isn't cleared... Fixes: 73a0d907 ("net: sh_eth: add support R8A7740") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 93be2b74 upstream. gcc-7 complains that wl3501_cs passes NULL into a function that then uses the argument as the input for memcpy: drivers/net/wireless/wl3501_cs.c: In function 'wl3501_get_scan': include/net/iw_handler.h:559:3: error: argument 2 null where non-null expected [-Werror=nonnull] memcpy(stream + point_len, extra, iwe->u.data.length); This works fine here because iwe->u.data.length is guaranteed to be 0 and the memcpy doesn't actually have an effect. Making the length check explicit avoids the warning and should have no other effect here. Also check the pointer itself, since otherwise we get warnings elsewhere in the code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jane Chu authored
[ Upstream commit 9d53caec ] A large sun4v SPARC system may have moments of intensive xcall activities, usually caused by unmapping many pages on many CPUs concurrently. This can flood receivers with CPU mondo interrupts for an extended period, causing some unlucky senders to hit send-mondo timeout. This problem gets worse as cpu count increases because sometimes mappings must be invalidated on all CPUs, and sometimes all CPUs may gang up on a single CPU. But a busy system is not a broken system. In the above scenario, as long as the receiver is making forward progress processing mondo interrupts, the sender should continue to retry. This patch implements the receiver's forward progress meter by introducing a per cpu counter 'cpu_mondo_counter[cpu]' where 'cpu' is in the range of 0..NR_CPUS. The receiver increments its counter as soon as it receives a mondo and the sender tracks the receiver's counter. If the receiver has stopped making forward progress when the retry limit is reached, the sender declares send-mondo-timeout and panic; otherwise, the receiver is allowed to keep making forward progress. In addition, it's been observed that PCIe hotplug events generate Correctable Errors that are handled by hypervisor and then OS. Hypervisor 'borrows' a guest cpu strand briefly to provide the service. If the cpu strand is simultaneously the only cpu targeted by a mondo, it may not be available for the mondo in 20msec, causing SUN4V mondo timeout. It appears that 1 second is the agreed wait time between hypervisor and guest OS, this patch makes the adjustment. Orabug: 25476541 Orabug: 26417466 Signed-off-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com> Reviewed-by: Rob Gardner <rob.gardner@oracle.com> Reviewed-by: Thomas Tai <thomas.tai@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wei Liu authored
[ Upstream commit dfa523ae ] Add a flag to indicate if a queue is rate-limited. Test the flag in NAPI poll handler and avoid rescheduling the queue if true, otherwise we risk locking up the host. The rescheduling will be done in the timer callback function. Reported-by: Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Tested-by: Jean-Louis Dupond <jean-louis@dupond.be> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Fainelli authored
commit 7b9a88a3 upstream. The PHY library does not deal very well with bind and unbind events. The first thing we would see is that we were not properly canceling the PHY state machine workqueue, so we would be crashing while dereferencing phydev->drv since there is no driver attached anymore. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Fainelli authored
[ Upstream commit 7ad813f2 ] Marc reported that he was not getting the PHY library adjust_link() callback function to run when calling phy_stop() + phy_disconnect() which does not indeed happen because we set the state machine to PHY_HALTED but we don't get to run it to process this state past that point. Fix this with a synchronous call to phy_state_machine() in order to have the state machine actually act on PHY_HALTED, set the PHY device's link down, turn the network device's carrier off and finally call the adjust_link() function. Reported-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Fixes: a390d1f3 ("phylib: convert state_queue work to delayed_work") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Moshe Shemesh authored
[ Upstream commit 219c81f7 ] When driver fail to allocate an entry to send command to FW, it must notify the calling function and release the memory allocated for this command. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit 6b84202c ] Commit b1f5bfc2 ("sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()") tried to fix the issue that it may overstep the chunk end for _sctp_walk_{params, errors} with 'chunk_end > offset(length) + sizeof(length)'. But it introduced a side effect: When processing INIT, it verifies the chunks with 'param.v == chunk_end' after iterating all params by sctp_walk_params(). With the check 'chunk_end > offset(length) + sizeof(length)', it would return when the last param is not yet accessed. Because the last param usually is fwdtsn supported param whose size is 4 and 'chunk_end == offset(length) + sizeof(length)' This is a badly issue even causing sctp couldn't process 4-shakes. Client would always get abort when connecting to server, due to the failure of INIT chunk verification on server. The patch is to use 'chunk_end <= offset(length) + sizeof(length)' instead of 'chunk_end < offset(length) + sizeof(length)' for both _sctp_walk_params and _sctp_walk_errors. Fixes: b1f5bfc2 ("sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Potapenko authored
[ Upstream commit b1f5bfc2 ] If the length field of the iterator (|pos.p| or |err|) is past the end of the chunk, we shouldn't access it. This bug has been detected by KMSAN. For the following pair of system calls: socket(PF_INET6, SOCK_STREAM, 0x84 /* IPPROTO_??? */) = 3 sendto(3, "A", 1, MSG_OOB, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = 1 the tool has reported a use of uninitialized memory: ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_rcv+0x17b8/0x43b0 CPU: 1 PID: 2940 Comm: probe Not tainted 4.11.0-rc5+ #2926 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x172/0x1c0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927 __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469 __sctp_rcv_init_lookup net/sctp/input.c:1074 __sctp_rcv_lookup_harder net/sctp/input.c:1233 __sctp_rcv_lookup net/sctp/input.c:1255 sctp_rcv+0x17b8/0x43b0 net/sctp/input.c:170 sctp6_rcv+0x32/0x70 net/sctp/ipv6.c:984 ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279 NF_HOOK ./include/linux/netfilter.h:257 ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322 dst_input ./include/net/dst.h:492 ip6_rcv_finish net/ipv6/ip6_input.c:69 NF_HOOK ./include/linux/netfilter.h:257 ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208 __netif_receive_skb net/core/dev.c:4246 process_backlog+0x667/0xba0 net/core/dev.c:4866 napi_poll net/core/dev.c:5268 net_rx_action+0xc95/0x1590 net/core/dev.c:5333 __do_softirq+0x485/0x942 kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902 </IRQ> do_softirq kernel/softirq.c:328 __local_bh_enable_ip+0x25b/0x290 kernel/softirq.c:181 local_bh_enable+0x37/0x40 ./include/linux/bottom_half.h:31 rcu_read_unlock_bh ./include/linux/rcupdate.h:931 ip6_finish_output2+0x19b2/0x1cf0 net/ipv6/ip6_output.c:124 ip6_finish_output+0x764/0x970 net/ipv6/ip6_output.c:149 NF_HOOK_COND ./include/linux/netfilter.h:246 ip6_output+0x456/0x520 net/ipv6/ip6_output.c:163 dst_output ./include/net/dst.h:486 NF_HOOK ./include/linux/netfilter.h:257 ip6_xmit+0x1841/0x1c00 net/ipv6/ip6_output.c:261 sctp_v6_xmit+0x3b7/0x470 net/sctp/ipv6.c:225 sctp_packet_transmit+0x38cb/0x3a20 net/sctp/output.c:632 sctp_outq_flush+0xeb3/0x46e0 net/sctp/outqueue.c:885 sctp_outq_uncork+0xb2/0xd0 net/sctp/outqueue.c:750 sctp_side_effects net/sctp/sm_sideeffect.c:1773 sctp_do_sm+0x6962/0x6ec0 net/sctp/sm_sideeffect.c:1147 sctp_primitive_ASSOCIATE+0x12c/0x160 net/sctp/primitive.c:88 sctp_sendmsg+0x43e5/0x4f90 net/sctp/socket.c:1954 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 do_syscall_64+0xe6/0x130 arch/x86/entry/common.c:285 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246 RIP: 0033:0x401133 RSP: 002b:00007fff6d99cd38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000401133 RDX: 0000000000000001 RSI: 0000000000494088 RDI: 0000000000000003 RBP: 00007fff6d99cd90 R08: 00007fff6d99cd50 R09: 000000000000001c R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004063d0 R14: 0000000000406460 R15: 0000000000000000 origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:211 slab_alloc_node mm/slub.c:2743 __kmalloc_node_track_caller+0x200/0x360 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x26b/0x840 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:933 sctp_packet_transmit+0x31e/0x3a20 net/sctp/output.c:570 sctp_outq_flush+0xeb3/0x46e0 net/sctp/outqueue.c:885 sctp_outq_uncork+0xb2/0xd0 net/sctp/outqueue.c:750 sctp_side_effects net/sctp/sm_sideeffect.c:1773 sctp_do_sm+0x6962/0x6ec0 net/sctp/sm_sideeffect.c:1147 sctp_primitive_ASSOCIATE+0x12c/0x160 net/sctp/primitive.c:88 sctp_sendmsg+0x43e5/0x4f90 net/sctp/socket.c:1954 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 do_syscall_64+0xe6/0x130 arch/x86/entry/common.c:285 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246 ================================================================== Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit e90ce2fc ] In dccp_feat_init, when ccid_get_builtin_ccids failsto alloc memory for rx.val, it should free tx.val before returning an error. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit b7953d3c ] The patch "dccp: fix a memleak that dccp_ipv6 doesn't put reqsk properly" fixed reqsk refcnt leak for dccp_ipv6. The same issue exists on dccp_ipv4. This patch is to fix it for dccp_ipv4. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit 0c2232b0 ] In dccp_v6_conn_request, after reqsk gets alloced and hashed into ehash table, reqsk's refcnt is set 3. one is for req->rsk_timer, one is for hlist, and the other one is for current using. The problem is when dccp_v6_conn_request returns and finishes using reqsk, it doesn't put reqsk. This will cause reqsk refcnt leaks and reqsk obj never gets freed. Jianlin found this issue when running dccp_memleak.c in a loop, the system memory would run out. dccp_memleak.c: int s1 = socket(PF_INET6, 6, IPPROTO_IP); bind(s1, &sa1, 0x20); listen(s1, 0x9); int s2 = socket(PF_INET6, 6, IPPROTO_IP); connect(s2, &sa1, 0x20); close(s1); close(s2); This patch is to put the reqsk before dccp_v6_conn_request returns, just as what tcp_conn_request does. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Gonzalez authored
[ Upstream commit 4813497b ] Before commit bf8f6952 ("Add blurb about RGMII") it was unclear whose responsibility it was to insert the required clock skew, and in hindsight, some PHY drivers got it wrong. The solution forward is to introduce a new property, explicitly requiring skew from the node to which it is attached. In the interim, this driver will handle all 4 RGMII modes identically (no skew). Fixes: 52dfc830 ("net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controller") Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefano Brivio authored
[ Upstream commit afce615a ] RFC 2465 defines ipv6IfStatsOutFragFails as: "The number of IPv6 datagrams that have been discarded because they needed to be fragmented at this output interface but could not be." The existing implementation, instead, would increase the counter twice in case we fail to allocate room for single fragments: once for the fragment, once for the datagram. This didn't look intentional though. In one of the two affected affected failure paths, the double increase was simply a result of a new 'goto fail' statement, introduced to avoid a skb leak. The other path appears to be affected since at least 2.6.12-rc2. Reported-by: Sabrina Dubroca <sdubroca@redhat.com> Fixes: 1d325d21 ("ipv6: ip6_fragment: fix headroom tests and skb leak") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
WANG Cong authored
[ Upstream commit c800aaf8 ] There are multiple reports showing we have a use-after-free in the timer prb_retire_rx_blk_timer_expired(), where we use struct tpacket_kbdq_core::pkbdq, a pg_vec, after it gets freed by free_pg_vec(). The interesting part is it is not freed via packet_release() but via packet_setsockopt(), which means we are not closing the socket. Looking into the big and fat function packet_set_ring(), this could happen if we satisfy the following conditions: 1. closing == 0, not on packet_release() path 2. req->tp_block_nr == 0, we don't allocate a new pg_vec 3. rx_ring->pg_vec is already set as V3, which means we already called packet_set_ring() wtih req->tp_block_nr > 0 previously 4. req->tp_frame_nr == 0, pass sanity check 5. po->mapped == 0, never called mmap() In this scenario we are clearing the old rx_ring->pg_vec, so we need to free this pg_vec, but we don't stop the timer on this path because of closing==0. The timer has to be stopped as long as we need to free pg_vec, therefore the check on closing!=0 is wrong, we should check pg_vec!=NULL instead. Thanks to liujian for testing different fixes. Reported-by: alexander.levin@verizon.com Reported-by: Dave Jones <davej@codemonkey.org.uk> Reported-by: liujian (CE) <liujian56@huawei.com> Tested-by: liujian (CE) <liujian56@huawei.com> Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liping Zhang authored
[ Upstream commit 69ec932e ] Before the 'type' is validated, we shouldn't use it to fetch the ovs_ct_attr_lens's minlen and maxlen, else, out of bound access may happen. Fixes: 7f8a436e ("openvswitch: Add conntrack action") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Jarosch authored
[ Upstream commit 9476d393 ] DMA transfers are not allowed to buffers that are on the stack. Therefore allocate a buffer to store the result of usb_control_message(). Fixes these bugreports: https://bugzilla.kernel.org/show_bug.cgi?id=195217 https://bugzilla.redhat.com/show_bug.cgi?id=1421387 https://bugzilla.redhat.com/show_bug.cgi?id=1427398 Shortened kernel backtrace from 4.11.9-200.fc25.x86_64: kernel: ------------[ cut here ]------------ kernel: WARNING: CPU: 3 PID: 2957 at drivers/usb/core/hcd.c:1587 kernel: transfer buffer not dma capable kernel: Call Trace: kernel: dump_stack+0x63/0x86 kernel: __warn+0xcb/0xf0 kernel: warn_slowpath_fmt+0x5a/0x80 kernel: usb_hcd_map_urb_for_dma+0x37f/0x570 kernel: ? try_to_del_timer_sync+0x53/0x80 kernel: usb_hcd_submit_urb+0x34e/0xb90 kernel: ? schedule_timeout+0x17e/0x300 kernel: ? del_timer_sync+0x50/0x50 kernel: ? __slab_free+0xa9/0x300 kernel: usb_submit_urb+0x2f4/0x560 kernel: ? urb_destroy+0x24/0x30 kernel: usb_start_wait_urb+0x6e/0x170 kernel: usb_control_msg+0xdc/0x120 kernel: mcs_get_reg+0x36/0x40 [mcs7780] kernel: mcs_net_open+0xb5/0x5c0 [mcs7780] ... Regression goes back to 4.9, so it's a good candidate for -stable. Though it's the decision of the maintainer. Thanks to Dan Williams for adding the "transfer buffer not dma capable" warning in the first place. It instantly pointed me in the right direction. Patch has been tested with transferring data from a Polar watch. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
WANG Cong authored
[ Upstream commit 153711f9 ] virtnet_set_mac_address() interprets mac address as struct sockaddr, but upper layer only allocates dev->addr_len which is ETH_ALEN + sizeof(sa_family_t) in this case. We lack a unified definition for mac address, so just fix the upper layer, this also allows drivers to interpret it to struct sockaddr freely. Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mahesh Bandewar authored
[ Upstream commit 8799a221 ] Net stack initialization currently initializes fib-trie after the first call to netdevice_notifier() call. In fact fib_trie initialization needs to happen before first rtnl_register(). It does not cause any problem since there are no devices UP at this moment, but trying to bring 'lo' UP at initialization would make this assumption wrong and exposes the issue. Fixes following crash Call Trace: ? alternate_node_alloc+0x76/0xa0 fib_table_insert+0x1b7/0x4b0 fib_magic.isra.17+0xea/0x120 fib_add_ifaddr+0x7b/0x190 fib_netdev_event+0xc0/0x130 register_netdevice_notifier+0x1c1/0x1d0 ip_fib_init+0x72/0x85 ip_rt_init+0x187/0x1e9 ip_init+0xe/0x1a inet_init+0x171/0x26c ? ipv4_offload_init+0x66/0x66 do_one_initcall+0x43/0x160 kernel_init_freeable+0x191/0x219 ? rest_init+0x80/0x80 kernel_init+0xe/0x150 ret_from_fork+0x22/0x30 Code: f6 46 23 04 74 86 4c 89 f7 e8 ae 45 01 00 49 89 c7 4d 85 ff 0f 85 7b ff ff ff 31 db eb 08 4c 89 ff e8 16 47 01 00 48 8b 44 24 38 <45> 8b 6e 14 4d 63 76 74 48 89 04 24 0f 1f 44 00 00 48 83 c4 08 RIP: kmem_cache_alloc+0xcf/0x1c0 RSP: ffff9b1500017c28 CR2: 0000000000000014 Fixes: 7b1a74fd ("[NETNS]: Refactor fib initialization so it can handle multiple namespaces.") Fixes: 7f9b8052 ("[IPV4]: fib hash|trie initialization") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sabrina Dubroca authored
[ Upstream commit 6399f1fa ] In some cases, offset can overflow and can cause an infinite loop in ip6_find_1stfragopt(). Make it unsigned int to prevent the overflow, and cap it at IPV6_MAXPLEN, since packets larger than that should be invalid. This problem has been here since before the beginning of git history. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David S. Miller authored
[ Upstream commit 63679112 ] The ifr.ifr_name is passed around and assumed to be NULL terminated. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Potapenko authored
[ Upstream commit 18bcf290 ] KMSAN reported use of uninitialized memory in skb_set_hash_from_sk(), which originated from the TCP request socket created in cookie_v6_check(): ================================================================== BUG: KMSAN: use of uninitialized memory in tcp_transmit_skb+0xf77/0x3ec0 CPU: 1 PID: 2949 Comm: syz-execprog Not tainted 4.11.0-rc5+ #2931 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 TCP: request_sock_TCPv6: Possible SYN flooding on port 20028. Sending cookies. Check SNMP counters. Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x172/0x1c0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927 __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469 skb_set_hash_from_sk ./include/net/sock.h:2011 tcp_transmit_skb+0xf77/0x3ec0 net/ipv4/tcp_output.c:983 tcp_send_ack+0x75b/0x830 net/ipv4/tcp_output.c:3493 tcp_delack_timer_handler+0x9a6/0xb90 net/ipv4/tcp_timer.c:284 tcp_delack_timer+0x1b0/0x310 net/ipv4/tcp_timer.c:309 call_timer_fn+0x240/0x520 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 __run_timers+0xc13/0xf10 kernel/time/timer.c:1601 run_timer_softirq+0x36/0xa0 kernel/time/timer.c:1614 __do_softirq+0x485/0x942 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 irq_exit+0x1fa/0x230 kernel/softirq.c:405 exiting_irq+0xe/0x10 ./arch/x86/include/asm/apic.h:657 smp_apic_timer_interrupt+0x5a/0x80 arch/x86/kernel/apic/apic.c:966 apic_timer_interrupt+0x86/0x90 arch/x86/entry/entry_64.S:489 RIP: 0010:native_restore_fl ./arch/x86/include/asm/irqflags.h:36 RIP: 0010:arch_local_irq_restore ./arch/x86/include/asm/irqflags.h:77 RIP: 0010:__msan_poison_alloca+0xed/0x120 mm/kmsan/kmsan_instr.c:440 RSP: 0018:ffff880024917cd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10 RAX: 0000000000000246 RBX: ffff8800224c0000 RCX: 0000000000000005 RDX: 0000000000000004 RSI: ffff880000000000 RDI: ffffea0000b6d770 RBP: ffff880024917d58 R08: 0000000000000dd8 R09: 0000000000000004 R10: 0000160000000000 R11: 0000000000000000 R12: ffffffff85abf810 R13: ffff880024917dd8 R14: 0000000000000010 R15: ffffffff81cabde4 </IRQ> poll_select_copy_remaining+0xac/0x6b0 fs/select.c:293 SYSC_select+0x4b4/0x4e0 fs/select.c:653 SyS_select+0x76/0xa0 fs/select.c:634 entry_SYSCALL_64_fastpath+0x13/0x94 arch/x86/entry/entry_64.S:204 RIP: 0033:0x4597e7 RSP: 002b:000000c420037ee0 EFLAGS: 00000246 ORIG_RAX: 0000000000000017 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004597e7 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 000000c420037ef0 R08: 000000c420037ee0 R09: 0000000000000059 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000042dc20 R13: 00000000000000f3 R14: 0000000000000030 R15: 0000000000000003 chained origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 kmsan_save_stack mm/kmsan/kmsan.c:317 kmsan_internal_chain_origin+0x12a/0x1f0 mm/kmsan/kmsan.c:547 __msan_store_shadow_origin_4+0xac/0x110 mm/kmsan/kmsan_instr.c:259 tcp_create_openreq_child+0x709/0x1ae0 net/ipv4/tcp_minisocks.c:472 tcp_v6_syn_recv_sock+0x7eb/0x2a30 net/ipv6/tcp_ipv6.c:1103 tcp_get_cookie_sock+0x136/0x5f0 net/ipv4/syncookies.c:212 cookie_v6_check+0x17a9/0x1b50 net/ipv6/syncookies.c:245 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:989 tcp_v6_do_rcv+0xdd8/0x1c60 net/ipv6/tcp_ipv6.c:1298 tcp_v6_rcv+0x41a3/0x4f00 net/ipv6/tcp_ipv6.c:1487 ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279 NF_HOOK ./include/linux/netfilter.h:257 ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322 dst_input ./include/net/dst.h:492 ip6_rcv_finish net/ipv6/ip6_input.c:69 NF_HOOK ./include/linux/netfilter.h:257 ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208 __netif_receive_skb net/core/dev.c:4246 process_backlog+0x667/0xba0 net/core/dev.c:4866 napi_poll net/core/dev.c:5268 net_rx_action+0xc95/0x1590 net/core/dev.c:5333 __do_softirq+0x485/0x942 kernel/softirq.c:284 origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198 kmsan_kmalloc+0x7f/0xe0 mm/kmsan/kmsan.c:337 kmem_cache_alloc+0x1c2/0x1e0 mm/slub.c:2766 reqsk_alloc ./include/net/request_sock.h:87 inet_reqsk_alloc+0xa4/0x5b0 net/ipv4/tcp_input.c:6200 cookie_v6_check+0x4f4/0x1b50 net/ipv6/syncookies.c:169 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:989 tcp_v6_do_rcv+0xdd8/0x1c60 net/ipv6/tcp_ipv6.c:1298 tcp_v6_rcv+0x41a3/0x4f00 net/ipv6/tcp_ipv6.c:1487 ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279 NF_HOOK ./include/linux/netfilter.h:257 ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322 dst_input ./include/net/dst.h:492 ip6_rcv_finish net/ipv6/ip6_input.c:69 NF_HOOK ./include/linux/netfilter.h:257 ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208 __netif_receive_skb net/core/dev.c:4246 process_backlog+0x667/0xba0 net/core/dev.c:4866 napi_poll net/core/dev.c:5268 net_rx_action+0xc95/0x1590 net/core/dev.c:5333 __do_softirq+0x485/0x942 kernel/softirq.c:284 ================================================================== Similar error is reported for cookie_v4_check(). Fixes: 58d607d3 ("tcp: provide skb->hash to synack packets") Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Toth authored
commit 6fb05e0d upstream. Avoid a double fetch by reusing the values from the prior transfer. Originally reported via https://bugzilla.kernel.org/show_bug.cgi?id=195559 Thanks to Pengfei Wang <wpengfeinudt@gmail.com> for reporting. Signed-off-by: Steven Toth <stoth@kernellabs.com> Reported-by: Pengfei Wang <wpengfeinudt@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Eduardo Valentin <eduval@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
In the backport of commit 4f7b0d26 ("drm: rcar-du: Simplify and fix probe error handling"), which is commit 8255d263 in this tree, the error handling path was incorrect. This patch fixes it up. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: thongsyho <thong.ho.px@rvc.renesas.com> Cc: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jin Qian authored
commit 15d3042a upstream. Make sure segno and blkoff read from raw image are valid. Cc: stable@vger.kernel.org Signed-off-by: Jin Qian <jinqian@google.com> [Jaegeuk Kim: adjust minor coding style] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> [AmitP: Found in Android Security bulletin for Aug'17, fixes CVE-2017-10663] Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Young authored
commit 9f5039ba upstream. Since commit e8f48188 ("[media] lirc: advertise LIRC_CAN_GET_REC_RESOLUTION and improve") lircd uses the ioctl LIRC_GET_REC_RESOLUTION to determine the shortest pulse or space that the hardware can detect. This breaks decoding in lirc because lircd expects the answer in microseconds, but nanoseconds is returned. Reported-by: Derek <user.vdr@gmail.com> Tested-by: Derek <user.vdr@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mel Gorman authored
commit 3ea27719 upstream. Stable note for 4.4: The upstream patch patches madvise(MADV_FREE) but 4.4 does not have support for that feature. The changelog is left as-is but the hunk related to madvise is omitted from the backport. Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.deReported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Bellinger authored
commit fce50a2f upstream. This patch fixes a NULL pointer dereference in isert_login_recv_done() of isert_conn->cm_id due to isert_cma_handler() -> isert_connect_error() resetting isert_conn->cm_id = NULL during a failed login attempt. As per Sagi, we will always see the completion of all recv wrs posted on the qp (given that we assigned a ->done handler), this is a FLUSH error completion, we just don't get to verify that because we deref NULL before. The issue here, was the assumption that dereferencing the connection cm_id is always safe, which is not true since: commit 4a579da2 Author: Sagi Grimberg <sagig@mellanox.com> Date: Sun Mar 29 15:52:04 2015 +0300 iser-target: Fix possible deadlock in RDMA_CM connection error As I see it, we have a direct reference to the isert_device from isert_conn which is the one-liner fix that we actually need like we do in isert_rdma_read_done() and isert_rdma_write_done(). Reported-by: Andrea Righi <righi.andrea@gmail.com> Tested-by: Andrea Righi <righi.andrea@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-