The me4000_ai_cancel() already reset this register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The STOP and IMMEDIATE_STOP bits in the ME4000_AI_CTRL_REG should be set,
not cleared, to stop any running conversions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function always returns 0 and the return value is never checked.
Just return void.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by me4000_ai_do_cmd(). Absorb it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function never fails and it's only called by me4000_ai_do_cmd().

Absorb it and remove the unnecessary failure check.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ai (*do_cmd_test) validates the trigger sources in Step 2b to ensure
that they are compatible. Save the 'ai_ctrl_mode' that will be used in the
private data so that ai_prepare(), which is called by the ai (*do_cmd),
does not have to recheck the sources in order to figure it out.

Also, tidy up the stop trigger checks so that the ME4000_AI_CTRL_HF_IRQ
bit is set in the common code path.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ai (*do_cmd_test) calls me4000_ai_round_cmd_args() to calculate the
timing values needed to the command. The the command test passes, the
core will then call the ai (*do_cmd) which then has to call
me4000_ai_round_cmd_args() again in order to get the same values to
pass to ai_prepare() in order to program the timing.

Add members to the private data to allow the (*do_cmd_test) to calculate
and save to values needed by ai_prepare().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function always succeeds. Change the return type to void and
remove the unnecessary error check in me4000_ai_do_cmd().

Move the function call in me4000_ai_do_cmd_test() from before Step 1
to Step 3 where the arguments are validated. There is no reason to
get the values if the previous steps fail.

Rename the function so it has namespace associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() marco to define the bits of this register.

For aesthetics, rename all the defines to remove the '_BIT' from the
name. Also, use ME4000_AI_STATUS_REG instead of ME4000_AI_CTRL_REG
when reading the register (they happen to be the same).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the helper function to check the range type instead of relying on the
value. For aesthetics, rename the local variable used for the range.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The chanspec channel, range, and aref are unsigned int values. Use the
correct types when extracting them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The coemdi (*insn_read) functions are supposed to read insn->n values
from the hardware. Make this function work like the core expects.

Use the comedi_offset_munge() helper to munge the two's complement
values to offset binary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_timeout() helper to busy-wait for the analog input end-of-
conversion instead of the udelay().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIT() macro to define the bits of this register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this function so it has namespace associated with the driver.

The last entry of the chanlist needs the ME4000_AI_LIST_LAST_ENTRY bit
set to end the list. Fix the function and tidy if up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi_lrange table for the analog inputs is inverted compared
to the values that need to be written to the ME4000_AI_CHANNEL_LIST_REG
to select the range.

Create a macro, ME4000_AI_LIST_RANGE(), to handle the inversion. Remove
the old defines and simplify the code a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define evaluates to 0 and is OR'ed with the 'entry' value that is
written to the ME4000_AI_CHANNEL_LIST_REG when the channel aref is a
single-ended type (AREF_GROUND or AREF_COMMON). OR'ing a zero value is
pretty silly, just remove it.

Remove the switch() in me4000_ai_insn_read() to simplify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In comedi drivers the local variable used for the dev->private pointer is
normally named 'devpriv'. For aesthetics, rename the variables in this
driver. Also, rename the struct to follow the norm.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some of the boards supported by this driver can do analog input sample &
hold on 8 of the channels. The 'ai_sh_nchan' member of the boardinfo is
used to indicate which boards support this feature. To save a bit of space,
convert this member to a bit-field, 'can_do_sh_ai'. Note, this feature is
not currently supported.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfo is always '4' for the boards that have an
analog output FIFO. Covert it to a bit-field, 'has_ao_fifo', to save a
bit of space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For the boards that have analog output capability, there are always
4 analog output channels. Convert the 'ao_nchan' member of the boardinfo
into a bit-field, 'has_ao', to save a bit of space and set the analog
output subdevice 'n_chan' to 4 when supported.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfo is only used as a flag indicating that the
board supports differential analog inputs. Convert the member to a bit-
field to save a bit of space. For aesthetics, rename the member to
'can_do_diff_ai'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the boardinfo 'has_counter' and 'ai_trig_analog' flags into
bit-fields to save a bit of space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The maximum differential channel is half the subdevice 'n_chan'. Use
that instead and remove the need for the 'board' variable.

Also, the comedi core does no validate the aref flags. Add a check
to ensure that the subdevice actually supports the AREF_DIFF mode.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'board' pointer is only used in this function to verify that the
'chan' is valid for an aref of AREF_DIFF. For differential inputs, the
maximum channel is half the subdevice 'n_chan'. Use that instead and
remove the 'board' variable.

Also, the comedi core does not validate the aref flags. Add a check
to ensure that the subdevice actually supports the AREF_DIFF mode.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core validates that the 'chan' is valid for the subdevice
before calling the (*insn_read) operation. Remove the unnecessary check.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some of the boards supported by this driver do not have differential analog
inputs. Only set the SDF_DIFF subdev_flag when the board supports it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver have analog inputs. They just
differ in the number of channels (32 or 16).

Always initialize the analog input subdevice in me4000_auto_attach().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver have 32 digital I/O channels.
Remove the unnecessary boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Globals are initialized to zero or NULL by GCC. No need to explicitly initialize them.
Signed-off-by: Daniel Machon <dmachon.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl warning:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
Signed-off-by: Miguel Bernabeu Diaz <miguelbernadi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch uses kasprintf which combines kzalloc and sprintf.
kasprintf also takes care of the size calculation.

Semantic patch used is as follows:

@@
expression a,flag;
expression list args;
statement S;
@@

 a =
- \(kmalloc\|kzalloc\)(...,flag)
+ kasprintf (flag,args)
  <... when != a
  if (a == NULL || ...) S
  ...>
- sprintf(a,args);
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace comma between expression statements by a semicolon.
The semantic patch used is as follows:

@@
expression e1,e2;
@@
e1
- ,
+ ;
e2;
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace comma between expression statements by a semicolon.
The semantic patch used is as follows:

@@
expression e1,e2;
@@
e1
- ,
+ ;
e2;
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace comma between expression statements by a semicolon.
The semantic patch used is as follows:

@@
expression e1,e2;
@@
e1
- ,
+ ;
e2;
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>