- 20 May, 2020 15 commits
-
-
Michael S. Tsirkin authored
[ Upstream commit 01c32598 ] When we fill up a receive VQ, try_fill_recv currently tries to count kicks using a 64 bit stats counter. Turns out, on a 32 bit kernel that uses a seqcount. sequence counts are "lock" constructs where you need to make sure that writers are serialized. In turn, this means that we mustn't run two try_fill_recv concurrently. Which of course we don't. We do run try_fill_recv sometimes from a softirq napi context, and sometimes from a fully preemptible context, but the later always runs with napi disabled. However, when it comes to the seqcount, lockdep is trying to enforce the rule that the same lock isn't accessed from preemptible and softirq context - it doesn't know about napi being enabled/disabled. This causes a false-positive warning: WARNING: inconsistent lock state ... inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. As a work around, shut down the warning by switching to u64_stats_update_begin_irqsave - that works by disabling interrupts on 32 bit only, is a NOP on 64 bit. Reported-by:
Thomas Gleixner <tglx@linutronix.de> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit e776af60 ] If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE operation we want to return -EINVAL error. But depending on zc->recv_skip_hint content, we might return -EIO error if the socket has SOCK_DONE set. Make sure to return -EINVAL in this case. BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177 __do_sys_getsockopt net/socket.c:2192 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829 RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009 RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4 Local variable ----zc@do_tcp_getsockopt created at: do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 Fixes: 05255b82 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Maciej Żenczykowski authored
[ Upstream commit 09454fd0 ] This reverts commit 19bda36c: | ipv6: add mtu lock check in __ip6_rt_update_pmtu | | Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu. | It leaded to that mtu lock doesn't really work when receiving the pkt | of ICMPV6_PKT_TOOBIG. | | This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4 | did in __ip_rt_update_pmtu. The above reasoning is incorrect. IPv6 *requires* icmp based pmtu to work. There's already a comment to this effect elsewhere in the kernel: $ git grep -p -B1 -A3 'RTAX_MTU lock' net/ipv6/route.c=4813= static int rt6_mtu_change_route(struct fib6_info *f6i, void *p_arg) ... /* In IPv6 pmtu discovery is not optional, so that RTAX_MTU lock cannot disable it. We still use this lock to block changes caused by addrconf/ndisc. */ This reverts to the pre-4.9 behaviour. Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Fixes: 19bda36c ("ipv6: add mtu lock check in __ip6_rt_update_pmtu") Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit b8c15839 ] We don't want to disconnect a session because of a stray PADT arriving while the interface is in promiscuous mode. Furthermore, multicast and broadcast packets make no sense here, so only PACKET_HOST is accepted. Reported-by:
David Balažic <xerces9@gmail.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 9de5d235 ] phy_restart_aneg() enables aneg in the PHY. That's not what we want if phydev->autoneg is disabled. In this case still update EEE advertisement register, but don't enable aneg and don't trigger an aneg restart. Fixes: f75abeb8 ("net: phy: restart phy autonegotiation after EEE advertisment change") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit eead1c2e ] The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by:
Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff2 ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit dd912306 ] syzbot managed to trigger a recursive NETDEV_FEAT_CHANGE event between bonding master and slave. I managed to find a reproducer for this: ip li set bond0 up ifenslave bond0 eth0 brctl addbr br0 ethtool -K eth0 lro off brctl addif br0 bond0 ip li set br0 up When a NETDEV_FEAT_CHANGE event is triggered on a bonding slave, it captures this and calls bond_compute_features() to fixup its master's and other slaves' features. However, when syncing with its lower devices by netdev_sync_lower_features() this event is triggered again on slaves when the LRO feature fails to change, so it goes back and forth recursively until the kernel stack is exhausted. Commit 17b85d29 intentionally lets __netdev_update_features() return -1 for such a failure case, so we have to just rely on the existing check inside netdev_sync_lower_features() and skip NETDEV_FEAT_CHANGE event only for this specific failure case. Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack") Reported-by: syzbot+e73ceacfd8560cc8a3ca@syzkaller.appspotmail.com Reported-by: syzbot+c2fb6f9ddcea95ba49b5@syzkaller.appspotmail.com Cc: Jarod Wilson <jarod@redhat.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jann Horn <jannh@google.com> Reviewed-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Raul E Rangel authored
[ Upstream commit 45a3fe3b ] The AMD eMMC 5.0 controller does not support 64 bit DMA. Fixes: 34597a3f ("mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400") Signed-off-by:
Raul E Rangel <rrangel@chromium.org> Link: https://marc.info/?l=linux-mmc&m=158879884514552&w=2Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200508165344.1.Id5bb8b1ae7ea576f26f9d91c761df7ccffbf58c5@changeidSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wu Bo authored
commit 83c6f239 upstream. If the __copy_from_user function failed we need to call sg_remove_request in sg_write. Link: https://lore.kernel.org/r/610618d9-e983-fd56-ed0f-639428343af7@huawei.comAcked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Wu Bo <wubo40@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Stefan Hajnoczi authored
[ Upstream commit 90b5feb8 ] A userspace process holding a file descriptor to a virtio_blk device can still invoke block_device_operations after hot unplug. This leads to a use-after-free accessing vblk->vdev in virtblk_getgeo() when ioctl(HDIO_GETGEO) is invoked: BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 IP: [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio] PGD 800000003a92f067 PUD 3a930067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000 RIP: 0010:[<ffffffffc00e5450>] [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio] RSP: 0018:ffff9be5fa893dc8 EFLAGS: 00010246 RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40 RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680 R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000 FS: 00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk] [<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0 [<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20 [<ffffffff8d488771>] block_ioctl+0x41/0x50 [<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0 [<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0 A related problem is that virtblk_remove() leaks the vd_index_ida index when something still holds a reference to vblk->disk during hot unplug. This causes virtio-blk device names to be lost (vda, vdb, etc). Fix these issues by protecting vblk->vdev with a mutex and reference counting vblk so the vd_index_ida index can be removed in all cases. Fixes: 48e4043d ("virtio: add virtio disk geometry feature") Reported-by:
Lance Digby <ldigby@redhat.com> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Link: https://lore.kernel.org/r/20200430140442.171016-1-stefanha@redhat.comSigned-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit dc30b405 ] The current gcc-10 snapshot produces a false-positive warning: net/core/drop_monitor.c: In function 'trace_drop_common.constprop': cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=] In file included from net/core/drop_monitor.c:23: include/uapi/linux/net_dropmon.h:36:8: note: at offset 0 to object 'entries' with size 4 declared here 36 | __u32 entries; | ^~~~~~~ I reported this in the gcc bugzilla, but in case it does not get fixed in the release, work around it by using a temporary variable. Fixes: 9a8afc8d ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit ee8d2267 ] Should an irq requested with 'devm_request_irq' be released explicitly, it should be done by 'devm_free_irq()', not 'free_irq()'. Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 10e3cc18 ] A call to 'dma_alloc_coherent()' is hidden in 'sonic_alloc_descriptors()', called from 'sonic_probe1()'. This is correctly freed in the remove function, but not in the error handling path of the probe function. Fix it and add the missing 'dma_free_coherent()' call. While at it, rename a label in order to be slightly more informative. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Signed-off-by:
-
Hugh Dickins authored
[ Upstream commit ea0dfeb4 ] Recent commit 71725ed1 ("mm: huge tmpfs: try to split_huge_page() when punching hole") has allowed syzkaller to probe deeper, uncovering a long-standing lockdep issue between the irq-unsafe shmlock_user_lock, the irq-safe xa_lock on mapping->i_pages, and shmem inode's info->lock which nests inside xa_lock (or tree_lock) since 4.8's shmem_uncharge(). user_shm_lock(), servicing SysV shmctl(SHM_LOCK), wants shmlock_user_lock while its caller shmem_lock() holds info->lock with interrupts disabled; but hugetlbfs_file_setup() calls user_shm_lock() with interrupts enabled, and might be interrupted by a writeback endio wanting xa_lock on i_pages. This may not risk an actual deadlock, since shmem inodes do not take part in writeback accounting, but there are several easy ways to avoid it. Requiring interrupts disabled for shmlock_user_lock would be easy, but it's a high-level global lock for which that seems inappropriate. Instead, recall that the use of info->lock to guard info->flags in shmem_lock() dates from pre-3.1 days, when races with SHMEM_PAGEIN and SHMEM_TRUNCATE could occur: nowadays it serves no purpose, the only flag added or removed is VM_LOCKED itself, and calls to shmem_lock() an inode are already serialized by the caller. Take info->lock out of the chain and the possibility of deadlock or lockdep warning goes away. Fixes: 4595ef88 ("shmem: make shmem_inode_info::lock irq-safe") Reported-by: syzbot+c8a8197c8852f566b9d9@syzkaller.appspotmail.com Reported-by: syzbot+40b71e145e73f78f81ad@syzkaller.appspotmail.com Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Yang Shi <yang.shi@linux.alibaba.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2004161707410.16322@eggly.anvils Link: https://lore.kernel.org/lkml/000000000000e5838c05a3152f53@google.com/ Link: https://lore.kernel.org/lkml/0000000000003712b305a331d3b1@google.com/Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Florian Fainelli authored
commit 86f8b1c0 upstream. Prior to 1d27732f ("net: dsa: setup and teardown ports"), we would not treat failures to set-up an user port as fatal, but after this commit we would, which is a regression for some systems where interfaces may be declared in the Device Tree, but the underlying hardware may not be present (pluggable daughter cards for instance). Fixes: 1d27732f ("net: dsa: setup and teardown ports") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 14 May, 2020 25 commits
-
-
Greg Kroah-Hartman authored
-
Oleg Nesterov authored
[ Upstream commit b5f20061 ] Commit cc731525 ("signal: Remove kernel interal si_code magic") changed the value of SI_FROMUSER(SI_MESGQ), this means that mq_notify() no longer works if the sender doesn't have rights to send a signal. Change __do_notify() to use do_send_sig_info() instead of kill_pid_info() to avoid check_kill_permission(). This needs the additional notify.sigev_signo != 0 check, shouldn't we change do_mq_notify() to deny sigev_signo == 0 ? Test-case: #include <signal.h> #include <mqueue.h> #include <unistd.h> #include <sys/wait.h> #include <assert.h> static int notified; static void sigh(int sig) { notified = 1; } int main(void) { signal(SIGIO, sigh); int fd = mq_open("/mq", O_RDWR|O_CREAT, 0666, NULL); assert(fd >= 0); struct sigevent se = { .sigev_notify = SIGEV_SIGNAL, .sigev_signo = SIGIO, }; assert(mq_notify(fd, &se) == 0); if (!fork()) { assert(setuid(1) == 0); mq_send(fd, "",1,0); return 0; } wait(NULL); mq_unlink("/mq"); assert(notified); return 0; } [manfred@colorfullife.com: 1) Add self_exec_id evaluation so that the implementation matches do_notify_parent 2) use PIDTYPE_TGID everywhere] Fixes: cc731525 ("signal: Remove kernel interal si_code magic") Reported-by:
Yoji <yoji.fujihar.min@gmail.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: <1vier1@web.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/e2a782e4-eab9-4f5c-c749-c07a8f7a4e66@colorfullife.comSigned-off-by:
-
Ivan Delalande authored
commit e08df079 upstream. If the trapping instruction contains a ':', for a memory access through segment registers for example, the sed substitution will insert the '*' marker in the middle of the instruction instead of the line address: 2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction I started to think I had forgotten some quirk of the assembly syntax before noticing that it was actually coming from the script. Fix it to add the address marker at the right place for these instructions: 28: 49 8b 06 mov (%r14),%rax 2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction 30: 0f 94 c0 sete %al Fixes: 18ff44b1 ("scripts/decodecode: make faulting insn ptr more robust") Signed-off-by:
Ivan Delalande <colona@arista.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20200419223653.GA31248@visorSigned-off-by:
-
Josh Poimboeuf authored
commit d8dd25a4 upstream. When the current frame address (CFA) is stored on the stack (i.e., cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack offset when there are subsequent pushes or pops. This results in bad ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the previous stack pointer on the stack and does a subsequent push. This fixes the following unwinder warning: WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0 Fixes: 627fce14 ("objtool: Add ORC unwind table generation") Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Reported-by:
Dave Jones <dsj@fb.com> Reported-by:
Steven Rostedt <rostedt@goodmis.org> Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Reported-by:
Joe Mario <jmario@redhat.com> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.comSigned-off-by:
-
Arnd Bergmann authored
commit c165d57b upstream. gcc-10 points out that a code path exists where a pointer to a stack variable may be passed back to the caller: net/netfilter/nfnetlink_osf.c: In function 'nf_osf_hdr_ctx_init': cc1: warning: function may return address of local variable [-Wreturn-local-addr] net/netfilter/nfnetlink_osf.c:171:16: note: declared here 171 | struct tcphdr _tcph; | ^~~~~ I am not sure whether this can happen in practice, but moving the variable declaration into the callers avoids the problem. Fixes: 31a9c292 ("netfilter: nf_osf: add struct nf_osf_hdr_ctx") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Guillaume Nault authored
commit ea64d8d6 upstream. If the UDP header of a local VXLAN endpoint is NAT-ed, and the VXLAN device has disabled UDP checksums and enabled Tx checksum offloading, then the skb passed to udp_manip_pkt() has hdr->check == 0 (outer checksum disabled) and skb->ip_summed == CHECKSUM_PARTIAL (inner packet checksum offloaded). Because of the ->ip_summed value, udp_manip_pkt() tries to update the outer checksum with the new address and port, leading to an invalid checksum sent on the wire, as the original null checksum obviously didn't take the old address and port into account. So, we can't take ->ip_summed into account in udp_manip_pkt(), as it might not refer to the checksum we're acting on. Instead, we can base the decision to update the UDP checksum entirely on the value of hdr->check, because it's null if and only if checksum is disabled: * A fully computed checksum can't be 0, since a 0 checksum is represented by the CSUM_MANGLED_0 value instead. * A partial checksum can't be 0, since the pseudo-header always adds at least one non-zero value (the UDP protocol type 0x11) and adding more values to the sum can't make it wrap to 0 as the carry is then added to the wrapped number. * A disabled checksum uses the special value 0. The problem seems to be there from day one, although it was probably not visible before UDP tunnels were implemented. Fixes: 5b1158e9 ("[NETFILTER]: Add NAT support for nf_conntrack") Signed-off-by:
-
Josh Poimboeuf authored
commit 81b67439 upstream. The following execution path is possible: fsnotify() [ realign the stack and store previous SP in R10 ] <IRQ> [ only IRET regs saved ] common_interrupt() interrupt_entry() <NMI> [ full pt_regs saved ] ... [ unwind stack ] When the unwinder goes through the NMI and the IRQ on the stack, and then sees fsnotify(), it doesn't have access to the value of R10, because it only has the five IRET registers. So the unwind stops prematurely. However, because the interrupt_entry() code is careful not to clobber R10 before saving the full regs, the unwinder should be able to read R10 from the previously saved full pt_regs associated with the NMI. Handle this case properly. When encountering an IRET regs frame immediately after a full pt_regs frame, use the pt_regs as a backup which can be used to get the C register values. Also, note that a call frame resets the 'prev_regs' value, because a function is free to clobber the registers. For this fix to work, the IRET and full regs frames must be adjacent, with no FUNC frames in between. So replace the FUNC hint in interrupt_entry() with an IRET_REGS hint. Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder") Reviewed-by:
-
Josh Poimboeuf authored
commit a0f81bf2 upstream. If the ORC entry type is unknown, nothing else can be done other than reporting an error. Exit the function instead of breaking out of the switch statement. Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder") Reviewed-by:
-
Josh Poimboeuf authored
commit 98d0c8eb upstream. If the unwinder is called before the ORC data has been initialized, orc_find() returns NULL, and it tries to fall back to using frame pointers. This can cause some unexpected warnings during boot. Move the 'orc_init' check from orc_find() to __unwind_init(), so that it doesn't even try to unwind from an uninitialized state. Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder") Reviewed-by:
-
Miroslav Benes authored
commit f1d9a2ab upstream. When unwinding an inactive task, the ORC unwinder skips the first frame by default. If both the 'regs' and 'first_frame' parameters of unwind_start() are NULL, 'state->sp' and 'first_frame' are later initialized to the same value for an inactive task. Given there is a "less than or equal to" comparison used at the end of __unwind_start() for skipping stack frames, the first frame is skipped. Drop the equal part of the comparison and make the behavior equivalent to the frame pointer unwinder. Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder") Reviewed-by:
-
Jann Horn authored
commit f977df7b upstream. The LEAQ instruction in rewind_stack_do_exit() moves the stack pointer directly below the pt_regs at the top of the task stack before calling do_exit(). Tell the unwinder to expect pt_regs. Fixes: 8c1f7558 ("x86/entry/64: Add unwind hint annotations") Reviewed-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 1fb14363 upstream. In swapgs_restore_regs_and_return_to_usermode, after the stack is switched to the trampoline stack, the existing UNWIND_HINT_REGS hint is no longer valid, which can result in the following ORC unwinder warning: WARNING: can't dereference registers at 000000003aeb0cdd for ip swapgs_restore_regs_and_return_to_usermode+0x93/0xa0 For full correctness, we could try to add complicated unwind hints so the unwinder could continue to find the registers, but when when it's this close to kernel exit, unwind hints aren't really needed anymore and it's fine to just use an empty hint which tells the unwinder to stop. For consistency, also move the UNWIND_HINT_EMPTY in entry_SYSCALL_64_after_hwframe to a similar location. Fixes: 3e3b9293 ("x86/entry/64: Return to userspace from the trampoline stack") Reported-by:
Dr. David Alan Gilbert <dgilbert@redhat.com> Reported-by:
-
Josh Poimboeuf authored
commit 06a9750e upstream. The PUSH_AND_CLEAR_REGS macro zeroes each register immediately after pushing it. If an NMI or exception hits after a register is cleared, but before the UNWIND_HINT_REGS annotation, the ORC unwinder will wrongly think the previous value of the register was zero. This can confuse the unwinding process and cause it to exit early. Because ORC is simpler than DWARF, there are a limited number of unwind annotation states, so it's not possible to add an individual unwind hint after each push/clear combination. Instead, the register clearing instructions need to be consolidated and moved to after the UNWIND_HINT_REGS annotation. Fixes: 3f01daec ("x86/entry/64: Introduce the PUSH_AND_CLEAN_REGS macro") Reviewed-by:
-
Xiyu Yang authored
commit 6f91a3f7 upstream. batadv_v_ogm_process() invokes batadv_hardif_neigh_get(), which returns a reference of the neighbor object to "hardif_neigh" with increased refcount. When batadv_v_ogm_process() returns, "hardif_neigh" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling paths of batadv_v_ogm_process(). When batadv_v_ogm_orig_get() fails to get the orig node and returns NULL, the refcnt increased by batadv_hardif_neigh_get() is not decreased, causing a refcnt leak. Fix this issue by jumping to "out" label when batadv_v_ogm_orig_get() fails to get the orig node. Fixes: 9323158e ("batman-adv: OGMv2 - implement originators logic") Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Xiyu Yang authored
commit 6107c5da upstream. batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(), which gets a batadv_hard_iface object from net_dev with increased refcnt and its reference is assigned to a local pointer 'hard_iface'. When batadv_store_throughput_override() returns, "hard_iface" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in one error path of batadv_store_throughput_override(). When batadv_parse_throughput() returns NULL, the refcnt increased by batadv_hardif_get_by_netdev() is not decreased, causing a refcnt leak. Fix this issue by jumping to "out" label when batadv_parse_throughput() returns NULL. Fixes: 0b5ecc68 ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by:
-
Xiyu Yang authored
commit f872de81 upstream. batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(), which gets a batadv_hard_iface object from net_dev with increased refcnt and its reference is assigned to a local pointer 'hard_iface'. When batadv_show_throughput_override() returns, "hard_iface" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in the normal path of batadv_show_throughput_override(), which forgets to decrease the refcnt increased by batadv_hardif_get_by_netdev() before the function returns, causing a refcnt leak. Fix this issue by calling batadv_hardif_put() before the batadv_show_throughput_override() returns in the normal path. Fixes: 0b5ecc68 ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by:
-
George Spelvin authored
commit fd0c42c4 upstream. and change to pseudorandom numbers, as this is a traffic dithering operation that doesn't need crypto-grade. The previous code operated in 4 steps: 1. Generate a random byte 0 <= rand_tq <= 255 2. Multiply it by BATADV_TQ_MAX_VALUE - tq 3. Divide by 255 (= BATADV_TQ_MAX_VALUE) 4. Return BATADV_TQ_MAX_VALUE - rand_tq This would apperar to scale (BATADV_TQ_MAX_VALUE - tq) by a random value between 0/255 and 255/255. But! The intermediate value between steps 3 and 4 is stored in a u8 variable. So it's truncated, and most of the time, is less than 255, after which the division produces 0. Specifically, if tq is odd, the product is always even, and can never be 255. If tq is even, there's exactly one random byte value that will produce a product byte of 255. Thus, the return value is 255 (511/512 of the time) or 254 (1/512 of the time). If we assume that the truncation is a bug, and the code is meant to scale the input, a simpler way of looking at it is that it's returning a random value between tq and BATADV_TQ_MAX_VALUE, inclusive. Well, we have an optimized function for doing just that. Fixes: 3c12de9a ("batman-adv: network coding - code and transmit packets if possible") Signed-off-by:
George Spelvin <lkml@sdf.org> Signed-off-by:
-
Sean Christopherson authored
Based on upstream commit f3689e3f. Save RCX, RDX and RSI to fake outputs to coerce the compiler into treating them as clobbered. RCX in particular is likely to be reused by the compiler to dereference the 'struct vcpu_vmx' pointer, which will result in a null pointer dereference now that RCX is zeroed by the asm blob. Tag the asm() blob as volatile to prevent GCC from dropping the blob, which is possible now that the blob has output values, all of which are unused. Upstream commit f3689e3f ("KVM: VMX: Save RSI to an unused output in the vCPU-run asm blob") is not a direct equivalent of this patch. As its shortlog states, it only tagged RSI as clobbered, whereas here RCX and RDX are also clobbered. In upstream at the time of the offending commit (b4be9803 in 4.19, 0e0ab73c upstream), the inline asm blob had previously been moved to a dedicated helper, __vmx_vcpu_run(). For unrelated reasons, __vmx_vcpu_run() was put into its own optimization unit, which for all intents and purposes made it impossible to consume clobbered registers because RCX, RDX and RSI are volatile and __vmx_vcpu_run() couldn't itself be inlined. In other words, the bug existed but couldn't be hit. Similarly, the lack of "volatile" was also a bug in upstream that was hidden by an unrelated change that exists in upstream but not in 4.19. In this case, the asm blob also uses ASM_CALL_CONSTRAINT (marks RSP as being an input/output constraint) in upstream to play nice with objtool due the blob making a CALL. In 4.19, there is no CALL and thus no ASM_CALL_CONSTRAINT. Furthermore, both of the lurking bugs were blasted away in upstream by commits 5e0781df ("KVM: VMX: Move vCPU-run code to a proper assembly routine") and fc2ba5a2 ("KVM: VMX: Call vCPU-run asm sub-routine from C and remove clobbering"), i.e. these bugs will never be directly fixed in upstream. Reported-by:
Tobias Urdin <tobias.urdin@binero.com> Fixes: b4be9803 ("KVM: VMX: Zero out *all* general purpose registers after VM-Exit") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit 051a2d3e upstream. Use '%% " _ASM_CX"' instead of '%0' to dereference RCX, i.e. the 'struct vcpu_vmx' pointer, in the VM-Enter asm blobs of vmx_vcpu_run() and nested_vmx_check_vmentry_hw(). Using the symbolic name means that adding/removing an output parameter(s) requires "rewriting" almost all of the asm blob, which makes it nearly impossible to understand what's being changed in even the most minor patches. Opportunistically improve the code comments. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Luis Chamberlain authored
commit 3740d93e upstream. Commit 64e90a8a ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()") added the optiont to disable all call_usermodehelper() calls by setting STATIC_USERMODEHELPER_PATH to an empty string. When this is done, and crashdump is triggered, it will crash on null pointer dereference, since we make assumptions over what call_usermodehelper_exec() did. This has been reported by Sergey when one triggers a a coredump with the following configuration: ``` CONFIG_STATIC_USERMODEHELPER=y CONFIG_STATIC_USERMODEHELPER_PATH="" kernel.core_pattern = |/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h %e ``` The way disabling the umh was designed was that call_usermodehelper_exec() would just return early, without an error. But coredump assumes certain variables are set up for us when this happens, and calls ile_start_write(cprm.file) with a NULL file. [ 2.819676] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 2.819859] #PF: supervisor read access in kernel mode [ 2.820035] #PF: error_code(0x0000) - not-present page [ 2.820188] PGD 0 P4D 0 [ 2.820305] Oops: 0000 [#1] SMP PTI [ 2.820436] CPU: 2 PID: 89 Comm: a Not tainted 5.7.0-rc1+ #7 [ 2.820680] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014 [ 2.821150] RIP: 0010:do_coredump+0xd80/0x1060 [ 2.821385] Code: e8 95 11 ed ff 48 c7 c6 cc a7 b4 81 48 8d bd 28 ff ff ff 89 c2 e8 70 f1 ff ff 41 89 c2 85 c0 0f 84 72 f7 ff ff e9 b4 fe ff ff <48> 8b 57 20 0f b7 02 66 25 00 f0 66 3d 00 8 0 0f 84 9c 01 00 00 44 [ 2.822014] RSP: 0000:ffffc9000029bcb8 EFLAGS: 00010246 [ 2.822339] RAX: 0000000000000000 RBX: ffff88803f860000 RCX: 000000000000000a [ 2.822746] RDX: 0000000000000009 RSI: 0000000000000282 RDI: 0000000000000000 [ 2.823141] RBP: ffffc9000029bde8 R08: 0000000000000000 R09: ffffc9000029bc00 [ 2.823508] R10: 0000000000000001 R11: ffff88803dec90be R12: ffffffff81c39da0 [ 2.823902] R13: ffff88803de84400 R14: 0000000000000000 R15: 0000000000000000 [ 2.824285] FS: 00007fee08183540(0000) GS:ffff88803e480000(0000) knlGS:0000000000000000 [ 2.824767] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.825111] CR2: 0000000000000020 CR3: 000000003f856005 CR4: 0000000000060ea0 [ 2.825479] Call Trace: [ 2.825790] get_signal+0x11e/0x720 [ 2.826087] do_signal+0x1d/0x670 [ 2.826361] ? force_sig_info_to_task+0xc1/0xf0 [ 2.826691] ? force_sig_fault+0x3c/0x40 [ 2.826996] ? do_trap+0xc9/0x100 [ 2.827179] exit_to_usermode_loop+0x49/0x90 [ 2.827359] prepare_exit_to_usermode+0x77/0xb0 [ 2.827559] ? invalid_op+0xa/0x30 [ 2.827747] ret_from_intr+0x20/0x20 [ 2.827921] RIP: 0033:0x55e2c76d2129 [ 2.828107] Code: 2d ff ff ff e8 68 ff ff ff 5d c6 05 18 2f 00 00 01 c3 0f 1f 80 00 00 00 00 c3 0f 1f 80 00 00 00 00 e9 7b ff ff ff 55 48 89 e5 <0f> 0b b8 00 00 00 00 5d c3 66 2e 0f 1f 84 0 0 00 00 00 00 0f 1f 40 [ 2.828603] RSP: 002b:00007fffeba5e080 EFLAGS: 00010246 [ 2.828801] RAX: 000055e2c76d2125 RBX: 0000000000000000 RCX: 00007fee0817c718 [ 2.829034] RDX: 00007fffeba5e188 RSI: 00007fffeba5e178 RDI: 0000000000000001 [ 2.829257] RBP: 00007fffeba5e080 R08: 0000000000000000 R09: 00007fee08193c00 [ 2.829482] R10: 0000000000000009 R11: 0000000000000000 R12: 000055e2c76d2040 [ 2.829727] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 2.829964] CR2: 0000000000000020 [ 2.830149] ---[ end trace ceed83d8c68a1bf1 ]--- ``` Cc: <stable@vger.kernel.org> # v4.11+ Fixes: 64e90a8a ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199795Reported-by:
Tony Vroon <chainsaw@gentoo.org> Reported-by:
Sergey Kvachonok <ravenexp@gmail.com> Tested-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20200416162859.26518-1-mcgrof@kernel.orgSigned-off-by:
-
Oscar Carter authored
commit 769acc36 upstream. Check the return value of gasket_get_bar_index function as it can return a negative one (-EINVAL). If this happens, a negative index is used in the "gasket_dev->bar_data" array. Addresses-Coverity-ID: 1438542 ("Negative array index read") Fixes: 9a69f508 ("drivers/staging: Gasket driver framework + Apex driver") Signed-off-by:
Oscar Carter <oscar.carter@gmx.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Richard Yeh <rcy@google.com> Link: https://lore.kernel.org/r/20200501155118.13380-1-oscar.carter@gmx.comSigned-off-by:
-
David Hildenbrand authored
commit e84fe99b upstream. Without CONFIG_PREEMPT, it can happen that we get soft lockups detected, e.g., while booting up. watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0-next-20200331+ #4 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: __pageblock_pfn_to_page+0x134/0x1c0 Call Trace: set_zone_contiguous+0x56/0x70 page_alloc_init_late+0x166/0x176 kernel_init_freeable+0xfa/0x255 kernel_init+0xa/0x106 ret_from_fork+0x35/0x40 The issue becomes visible when having a lot of memory (e.g., 4TB) assigned to a single NUMA node - a system that can easily be created using QEMU. Inside VMs on a hypervisor with quite some memory overcommit, this is fairly easy to trigger. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Reviewed-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Shile Zhang <shile.zhang@linux.alibaba.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416073417.5003-1-david@redhat.comSigned-off-by:
-
Mark Rutland authored
commit 027d0c71 upstream. The static analyzer in GCC 10 spotted that in huge_pte_alloc() we may pass a NULL pmdp into pte_alloc_map() when pmd_alloc() returns NULL: | CC arch/arm64/mm/pageattr.o | CC arch/arm64/mm/hugetlbpage.o | from arch/arm64/mm/hugetlbpage.c:10: | arch/arm64/mm/hugetlbpage.c: In function ‘huge_pte_alloc’: | ./arch/arm64/include/asm/pgtable-types.h:28:24: warning: dereference of NULL ‘pmdp’ [CWE-690] [-Wanalyzer-null-dereference] | ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’ | arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’ | |arch/arm64/mm/hugetlbpage.c:232:10: | |./arch/arm64/include/asm/pgtable-types.h:28:24: | ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’ | arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’ This can only occur when the kernel cannot allocate a page, and so is unlikely to happen in practice before other systems start failing. We can avoid this by bailing out if pmd_alloc() fails, as we do earlier in the function if pud_alloc() fails. Fixes: 66b3923a ("arm64: hugetlb: add support for PTE contiguous bit") Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reported-by:
Kyrill Tkachov <kyrylo.tkachov@arm.com> Cc: <stable@vger.kernel.org> # 4.5.x- Cc: Will Deacon <will@kernel.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 0225fd5e upstream. In the unlikely event that a 32bit vcpu traps into the hypervisor on an instruction that is located right at the end of the 32bit range, the emulation of that instruction is going to increment PC past the 32bit range. This isn't great, as userspace can then observe this value and get a bit confused. Conversly, userspace can do things like (in the context of a 64bit guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0, set PC to a 64bit value, change PSTATE to AArch32-USR, and observe that PC hasn't been truncated. More confusion. Fix both by: - truncating PC increments for 32bit guests - sanitizing all 32bit regs every time a core reg is changed by userspace, and that PSTATE indicates a 32bit mode. Cc: stable@vger.kernel.org Acked-by:
Will Deacon <will@kernel.org> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Marc Zyngier authored
commit 1c32ca5d upstream. When deciding whether a guest has to be stopped we check whether this is a private interrupt or not. Unfortunately, there's an off-by-one bug here, and we fail to recognize a whole range of interrupts as being global (GICv2 SPIs 32-63). Fix the condition from > to be >=. Cc: stable@vger.kernel.org Fixes: abd72296 ("KVM: arm/arm64: Simplify active_change_prepare and plug race") Reported-by:
André Przywara <andre.przywara@arm.com> Signed-off-by:
-
