Now that the component framework is integrated into the ASoC core,
remove any redundant code in this driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Now that the component framework is integrated into the ASoC core,
remove any redundant code in this driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Now that the component framework is integrated into the ASoC core,
remove any redundant code in this driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch aims at achieving dynamic behaviour of audio card when
the dependent components disappear and reappear.

With this patch the card is removed if any of the dependent component
is removed and card is added back if the dependent component comes back.
All this is done using component framework and matching based on
component name.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Having interrupts enabled for ACP<->SYSMEM DMA transfer, we are in
for an interrupt storm.
For both playback and capture interrupts should be enabled for
I2S<->ACP DMA.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Earlier, ch1 was used to define ACP-SYSMEM transfer and ch2 for
ACP-I2S transfer. With recent patches ch1 is used to define channel
order number 1 and ch2 as channel order number 2. Thus,
Playback:
ch1:SYSMEM->ACP
ch2:ACP->I2S
Capture:
ch1:I2S->ACP
ch1:ACP->SYSMEM
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Patch adds Geminilake I2S machine driver which uses following codecs:
RT5682 and MAX98357A.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

When the component does not match the configuration table provided
by the card, let soc-core check the component node for a name prefix
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

As done for format and channels, add the possibility to merge
the backend rates on the frontend rates.

This useful if the backend does not support all rates supported by the
frontend, or if several backends (cpu and codecs) with different
capabilities are connected to the same frontend.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The goal of this patch is to simplify a bit dpcm runtime stream merge
by removing several local variables.

ATM, merge functions return the BE 'filter' values which should then be
filtered against the FE stream values. This create a lot of local
variable and unnecessary init of min and max.

Instead of this, we can pass the FE stream values directly and let the
BE filtering functions perform the merge 'in-place'
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Enable reporting of button presses now that the codec driver recently has
gotten support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Disable jack-detection and thus the codec IRQ over suspend/resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Enable button press detection for headsets by using the ovcd IRQ to get
notified of button presses.

This is modelled after (almost exactly copied from) the button press code
for the rt5640 which has identical ovcd hardware.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Allow the machine driver to disable jack-detect over a suspend/resume by
calling snd_soc_component_set_jack(NULL).

Note this renames rt5651_set_jack, where all the jack-enable work was done
to rt5651_enable_jack_detect. This function can now no longer fail as it
does not request the IRQ anymore. It can still be passed an invalid jack
source, but that should never happen, so this is now logged and treated as
no jack source.

Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

On removal we must free the IRQ *before* cancelling the jack-detect work,
so that the jack-detect work cannot be rescheduled by the IRQ.

Before this commit we were cancelling the jack-detect work from the
driver remove callback, while relying on devm to free the IRQ, which
happens after the remove callback.

This is the wrong order. This commit uses a devm-action to register
a devm callback which cancels the work, before requesting the IRQ
(devm tears things down in reverse order). This also allows us to
remove the now empty remove driver callback.

Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The rt5651 does not have a built-in speaker amplifier, so it is often
used together with an external amplifier. On Cherry Trail boards this
external amplifier's enable pin is driven through a GPIO, which is
given as the first GPIO in the ACPI resources of the codec fwnode.

This commit adds support to the bytcr_rt5651 for this GPIO, fixing
the speaker not working on CHT devices with a rt5651 codec.

Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Move the getting of the codec_dev, to add device-props to it, out of
byt_rt5651_add_codec_device_props() and into its caller,
snd_byt_rt5651_mc_probe().

This is a preparation patch for adding support for an external amplifier
enable GPIO, which requires further accesses to the codec_dev.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Remove is_valleyview helper, this is not necessary, we can simply call
x86_match_cpu() directly instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add a quirk for the Lenovo Miix2 8 tablet, this tablet uses a digital
mic on DMIC1 and has a mono-speaker. The jack-detect uses the default
settings..

Reported-and-tested-by: russianneuromancer@ya.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The playback DAI is connected to the DSP and the DSP might be sourcing
signals from the playback stream. Add a DAPM route between the two to make
sure that the playback DAI is powered up, when the DSP is active.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

For the moment, we can't enable CONFIG_SND_PXA_SOC_SSP unless we are
building for ARM PXA or MMP:

WARNING: unmet direct dependencies detected for PXA_SSP
  Depends on [n]: PLAT_PXA [=n]
  Selected by [y]:
  - SND_PXA_SOC_SSP [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y]

This adds an explicit dependency for it.

Fixes: 0a94cf34 ("ASoC: pxa: make SND_PXA2XX_SOC_I2S selectable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

The format specifier "%p" can leak kernel addresses.
Use "%pK" instead.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add suffix ULL to constant 256 in order to give the compiler complete
information about the proper arithmetic to use.

Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:

256 * fs * 2 * mclk_src_scaling[i].param

Addresses-Coverity-ID: 1432039 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Allow setting a clock called 'extclk' in the device of the ssp-dai
device. If specified, this clock will be set to the mclk rate from the
DAI's .set_sysclk() callback. The DAI will also configure itself to
use that external clock.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

To comply with the style of all kernel messages, add newline
to the end of every message.

Fixes: 70fb1052 ("ASoC: rsnd: add MIX (Mixer) support")
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add suffix ULL to constant 64 in order to give the compiler complete
information about the proper arithmetic to use.

Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:

rate[index] * txclk_df * 64

Addresses-Coverity-ID: 1222129 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

num_channels for slim dais are aready set int set_channel_map,
do not overwrite them in hw_params.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch add routings mixer controls for slim rx ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to SLIMbus TX dais in AFE module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Existing code already has support for SLIMbus TX and RX, only thing
that was missing from TX side was mapping between virtual to actual
DSP port ids.

This patch adds those mappings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun().  It simplifies the locking as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun().  It fixes the missing stream locking as a gratis,
too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

The XRUN trigger from the driver should be done via
snd_pcm_stop_xrun().  It fixes the missing stream locking as a gratis,
too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Replace open-codes with the standard snd_pcm_stop_xrun() helper.
It simplifies codes a lot.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add suffix ULL to constant 256 in order to give the compiler complete
information about the proper arithmetic to use.

Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:

256 * fs * 2 * mclk_src_scaling[i].param

Addresses-Coverity-ID: 1339616 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Machine drivers statically define a number of DAI links that currently
cannot be changed or removed by topology. This means PCMs and platform
components cannot be changed by topology at runtime AND machine drivers
are tightly coupled to topology.

This patch allows topology to override the machine driver DAI link config
in order to reuse machine drivers with different topologies and platform
components. The patch supports :-

1) create new FE PCMs with a topology defined PCM ID.
2) destroy existing static FE PCMs
3) change the platform component driver.
4) assign any new HW params fixups.
5) assign a new card name prefix to differentiate this topology to userspace.

The patch requires no changes to the machine drivers, but does add some
platform component flags that the platform component driver can assign
before loading topologies.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The optional clock phandle to aclk (Audio PLL clock) is no longer needed
by the driver.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The generated clock (gclk) driver is able to set aclk as its parent and
change its rate alone, if needed. This means that our driver no longer
needs to configure aclk and we can let gclk select and configure its
clock source.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for the es7154 which is basically an es7134 with an
embedded power amplifier and lower maximum sample rate
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>