Like the Samsung Galaxy A3/A5, the S4 Mini VE uses a Richtek RT5033 PMIC
as battery fuel gauge, charger, flash LED and for some regulators.
For now, only add the fuel gauge/battery device to the device tree,
so we can check the remaining battery percentage.

The other RT5033 drivers need some more work first before
they can be used properly.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004201921.18526-6-stephan@gerhold.net

Add the STMicroelectronics LSM6DS3 IMU that is used in the S4 Mini VE
to the device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004201921.18526-5-stephan@gerhold.net

Add the CORERIVER TC360 touch key together with the two necessary
fixed regulators for it.

Note that for some reason Samsung decided to connect this to GPIOs
where no hardware I2C bus is available, so we need to fall back
to software bit-banging using i2c-gpio.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004201921.18526-4-stephan@gerhold.net

Like msm8916-samsung-a3u-eur, the S4 Mini VE uses a Zinitix BT541
touch screen. Add it together with the necessary fixed-regulator
to the device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004201921.18526-3-stephan@gerhold.net

The Samsung Galaxy S4 Mini Value Edition is an updated version of the
original S4 Mini based on MSM8916. It is similar to the other Samsung
devices based on MSM8916 with only a few minor differences.

The device tree contains initial support for the S4 Mini Value Edition with:
  - UART
  - eMMC/SD card (needs quirk for some reason)
  - Buttons
  - Vibrator
  - WiFi/Bluetooth (WCNSS)
  - USB

Unfortunately, the S4 Mini VE was released with outdated 32-bit only
firmware and never received any update from Samsung. Since the 32-bit
TrustZone firmware is signed there seems to be no way currently to
actually boot this device tree on arm64 Linux at the moment. :(

However, it is possible to use this device tree by compiling an ARM32 kernel
instead. The device tree can be easily built on ARM32 with an #include
and it works really well there. To avoid confusion for others it is still
better to add this device tree on arm64. Otherwise it's easy to forget
to update this one when making some changes that affect all MSM8916 devices.

Maybe someone finds a way to boot ARM64 Linux on this device at some point.
In this case I expect that this device tree can be simply used as-is.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004201921.18526-2-stephan@gerhold.net

Add device tree for the Fairphone 4 smartphone which is based on
Snapdragon 750G (sm7225) which is basically sm6350.

Currently supported are UART, physical buttons (power & volume), screen
(based on simple-framebuffer set up by the bootloader), regulators and
USB.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007212444.328034-12-luca@z3ntu.xyz

The Snapdragon 750G (sm7225) is software-wise very similar to Snapdragon
690 (sm6350) with minor differences in clock speeds and as added here,
it uses the Kryo 570 instead of Kryo 560.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007212444.328034-11-luca@z3ntu.xyz

Add binding documentation for Fairphone 4 smartphone which is based on
Snapdragon 750G (sm7225).
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007212444.328034-10-luca@z3ntu.xyz

Document Kryo 570 CPUs found in Qualcomm Snapdragon 750G (SM7225).
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007212444.328034-9-luca@z3ntu.xyz

Add the necessary nodes for the debug uart on SM6350.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007212444.328034-8-luca@z3ntu.xyz

PM6350 is used in SM6350 and provides similar functionality to other
Qualcomm PMICs.

Add the pon node with power & volume key and the gpios.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007212444.328034-7-luca@z3ntu.xyz

Enable two of the remoteprocs found on SA8155p platform - 'audio and
compute'. Also specify firmware path for them.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928140929.2549459-3-bhupesh.sharma@linaro.org

Add fastrpc nodes for sDSP, cDSP, and aDSP.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928140929.2549459-2-bhupesh.sharma@linaro.org

Add fastrpc nodes for sDSP, cDSP, and aDSP.
Signed-off-by: Ola Jeppsson <ola@snap.com>
Acked-by: Heinrich Fink <hfink@snap.com>
Acked-by: Olivier Schonken <oschonken@snapchat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018085017.1549494-1-ola@snap.com

Like the c630, the OnePlus 6 is also capable of using both antenna
channels for 2.4 and 5ghz wifi, however unlike the c630 only the first
channel is used for bluetooth.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020163557.291803-1-caleb@connolly.tech

Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt
controller properties ('interrupt-controller' and '#interrupt-cells').
The interrupts property is no longer needed so remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-26-dmitry.baryshkov@linaro.org

Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt
controller properties ('interrupt-controller' and '#interrupt-cells').
The interrupts property is no longer needed so remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-25-dmitry.baryshkov@linaro.org

The majority of device tree nodes for mpps use xxxx-state as pinctrl
nodes. Change names of mpps pinctrl nodes for the apq8016-sbc board to
follow that pattern.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-13-dmitry.baryshkov@linaro.org

Add missing "qcom,spmi-mpp" to the compatible list as required by the
node description. Also add gpio-ranges property to mpps device tree
node, adding the mapping between pinctrl and GPIO pins.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-12-dmitry.baryshkov@linaro.org

Add missing "qcom,spmi-mpp" to the compatible list as required by the
node description. Also add gpio-ranges property to mpps device tree
node, adding the mapping between pinctrl and GPIO pins.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008012524.481877-11-dmitry.baryshkov@linaro.org

Add device node for Sleep stats driver which provides various
low power mode stats on msm8996, msm8998, qcs404, sdm630 and
sm6125.

Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1634107104-22197-6-git-send-email-mkshah@codeaurora.org

Add device node for Sleep stats driver which provides various
low power mode stats on sc7180, sc7280, sm8150, sm8250 and sm8350.

Also update the reg size of aoss_qmp device to 0x400.

Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1634107104-22197-5-git-send-email-mkshah@codeaurora.org

Add a dts fragment file to support the sc7180 boards with the second
source edp bridge, Parade ps8640.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008113839.v3.2.I187502fa747bc01a1c624ccf20d985fdffe9c320@changeid

Factor out ti-sn65dsi86 edp bridge as a separate dts fragment.
This helps us introduce the second source edp bridge later.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008113839.v3.1.Ibada67e75d2982157e64164f1d11715d46cdc42c@changeid

A new 'chassis-type' root node property has recently been approved for
the device-tree specification, in order to provide a simple way for
userspace to detect the device form factor and adjust their behavior
accordingly.

This patch fills in this property for end-user devices (such as laptops,
smartphones and tablets) based on Qualcomm ARM64 processors.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net> # msm8916
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016102025.23346-4-arnaud.ferraris@collabora.com

Switch dispcc and videocc into using MMCX domain directly. Drop the now
unused mmcx regulator.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829154757.784699-7-dmitry.baryshkov@linaro.org

Add "qcom,sc7180-qspi" compatible in qspi node
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632997450-32293-3-git-send-email-rajpat@codeaurora.org

Now that the SMEM binding and driver allows the SMEM node to be
described in the reserved-memory region directly, move the compatible
and hwlock properties to the reserved-memory node and drop the
standadlone node.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20210930182111.57353-5-bjorn.andersson@linaro.org

Using underscores in device tree nodes is not very common.
Additionally, the _region suffix in "smem_region@..." is not really
useful since it's obvious that it describes a reserved memory region.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210921152120.6710-2-stephan@gerhold.net

Commit 0f6b380d ("arm64: dts: qcom: apq8016-sbc: Update modem and WiFi
firmware path") added "firmware-name"s to the APQ8016 SBC (DB410c) device
tree to separate the (test key)-signed firmware from other devices.

However, the added names are a bit confusing. The "modem" firmware used by
DB410c is actually a simplified version for APQ8016 that lacks most of the
modem functionality (phone calls, SMS etc) that is available on MSM8916.
Placing it in "qcom/msm8916/modem.mbn" suggests that it supports all
functionality for MSM and not just the reduced functionality for APQ.

Request the firmware from "qcom/apq8016/modem.mbn" instead to clarify this.
Do the same for "wcnss.mbn" for consistency (although the WCNSS firmware
works just fine on MSM8916).

Finally, add a "_sbc" suffix to the WCNSS_qcom_wlan_nv.bin firmware file.
It seems like the nv.bin firmware is somewhat board specific and can
therefore vary a bit from device to device. This makes it more clear
which board it is intended to be used for.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210922195853.95574-1-stephan@gerhold.net

29.5V (29p5) is obviously wrong for regulator l4 and l5.  Correct them
to be 2.95V (2p95).  No functional change.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210926072215.27517-1-shawn.guo@linaro.org

Some multiline properties (spread out over multiple lines to keep length
in check) were not indented properly, leading to misalignment with the
items above.  The DT file is still small enough to address this early in
the process.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210925141841.407257-1-marijn.suijten@somainline.org

At the moment, longcheer-l8150 is using a dummy extcon-usb-gpio device
that permanently enables USB gadget mode. This workaround allows USB
to work but is actually wrong and confusing. The "vbus-gpio" used there
refers to an unused (floating) GPIO that is pulled up to make
extcon-usb-gpio report USB gadget mode permanently.

Replace this with the new &pm8916_usbin extcon device that actually
reports if an USB cable is attached or not. This allows the USB PHY
to be turned off when there is no USB cable attached and is much
cleaner overall.

Fixes: 16e8e807 ("arm64: dts: qcom: Add device tree for Longcheer L8150")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928112945.25310-3-stephan@gerhold.net

At the moment, USB gadget mode on MSM8916 works only with an extcon
device that reports the correct USB mode. This might be because the
USB PHY needs to be configured appropriately.

Unfortunately there is currently no simple approach to get such an
extcon device during early bring-up. The extcon device for USB VBUS
(i.e. gadget/peripheral mode) is typically provided by the charging
driver which is almost always very complex to port.

On pretty much all devices with PM8916, the USB VBUS is also connected
to the PM8916 "USB_IN" pad, no matter if they use the linear charger
integrated into PM8916 or not. The state of this pad can be checked
with the "USBIN_VALID" interrupt of PM8916.

The "qcom,pm8941-misc" binding exists to expose an "usb_vbus" and/or
"usb_id" interrupt from the PMIC as an extcon device.

Add a &pm8916_usbin node to pm8916.dtsi which can be used as simple
extcon device for devices that are currently lacking a proper charger
driver.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928112945.25310-2-stephan@gerhold.net

While removing the size from the "reg" properties in pm8916.dtsi,
commit bd6429e8 ("ARM64: dts: qcom: Remove size elements from
pmic reg properties") mistakenly also removed the second register
address for the rtc@6000 device. That one did not represent the size
of the register region but actually the address of the second "alarm"
register region of the rtc@6000 device.

Now there are "reg-names" for two "reg" elements, but there is actually
only one "reg" listed.

Since the DT schema for "qcom,pm8941-rtc" only expects one "reg"
element anyway, just drop the "reg-names" entirely to fix this.

Fixes: bd6429e8 ("ARM64: dts: qcom: Remove size elements from pmic reg properties")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928112945.25310-1-stephan@gerhold.net

Update MSS node to support MSA based modem boot on SC7280 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-11-git-send-email-sibis@codeaurora.org

This patch adds Q6V5 MSS PAS remoteproc node for SC7280 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-10-git-send-email-sibis@codeaurora.org

Add miscellaneous nodes to boot the modem and support post-mortem debug
on SC7280 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-9-git-send-email-sibis@codeaurora.org

Add, delete and update platform specific reserved memory nodes.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-8-git-send-email-sibis@codeaurora.org

Add missing reserved regions as described in v1 of SC7280 memory map.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-7-git-send-email-sibis@codeaurora.org