* pm-cpufreq:
  cpufreq: Make cpufreq_notify_transition & cpufreq_notify_post_transition static
  cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}
  cpufreq: Make sure frequency transitions are serialized
  intel_pstate: Use del_timer_sync in intel_pstate_cpu_stop
  cpufreq: resume drivers before enabling governors

* acpi-processor:
  Revert "ACPI / processor: Make it possible to get APIC ID via GIC"

* pnp:
  PNP: remove deprecated IRQF_DISABLED

* acpica:
  ACPICA: Enable auto-serialization as a default kernel behavior.
  ACPICA: Ignore sync_level for methods that have been auto-serialized.
  ACPICA: Add additional named objects for the auto-serialize method scan.
  ACPICA: Add auto-serialization support for ill-behaved control methods.
  ACPICA: Remove global option to serialize all control methods.

cpufreq_notify_transition() and cpufreq_notify_post_transition() shouldn't be
called directly by cpufreq drivers anymore and so these should be marked static.
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

CPUFreq core has new infrastructure that would guarantee serialized calls to
target() or target_index() callbacks. These are called
cpufreq_freq_transition_begin() and cpufreq_freq_transition_end().

This patch converts existing drivers to use these new set of routines.
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Whenever we change the frequency of a CPU, we call the PRECHANGE and POSTCHANGE
notifiers. They must be serialized, i.e. PRECHANGE and POSTCHANGE notifiers
should strictly alternate, thereby preventing two different sets of PRECHANGE or
POSTCHANGE notifiers from interleaving arbitrarily.

The following examples illustrate why this is important:

Scenario 1:
-----------
A thread reading the value of cpuinfo_cur_freq, will call
__cpufreq_cpu_get()->cpufreq_out_of_sync()->cpufreq_notify_transition()

The ondemand governor can decide to change the frequency of the CPU at the same
time and hence it can end up sending the notifications via ->target().

If the notifiers are not serialized, the following sequence can occur:
- PRECHANGE Notification for freq A (from cpuinfo_cur_freq)
- PRECHANGE Notification for freq B (from target())
- Freq changed by target() to B
- POSTCHANGE Notification for freq B
- POSTCHANGE Notification for freq A

We can see from the above that the last POSTCHANGE Notification happens for freq
A but the hardware is set to run at freq B.

Where would we break then?: adjust_jiffies() in cpufreq.c & cpufreq_callback()
in arch/arm/kernel/smp.c (which also adjusts the jiffies). All the
loops_per_jiffy calculations will get messed up.

Scenario 2:
-----------
The governor calls __cpufreq_driver_target() to change the frequency. At the
same time, if we change scaling_{min|max}_freq from sysfs, it will end up
calling the governor's CPUFREQ_GOV_LIMITS notification, which will also call
__cpufreq_driver_target(). And hence we end up issuing concurrent calls to
->target().

Typically, platforms have the following logic in their ->target() routines:
(Eg: cpufreq-cpu0, omap, exynos, etc)

A. If new freq is more than old: Increase voltage
B. Change freq
C. If new freq is less than old: decrease voltage

Now, if the two concurrent calls to ->target() are X and Y, where X is trying to
increase the freq and Y is trying to decrease it, we get the following race
condition:

X.A: voltage gets increased for larger freq
Y.A: nothing happens
Y.B: freq gets decreased
Y.C: voltage gets decreased
X.B: freq gets increased
X.C: nothing happens

Thus we can end up setting a freq which is not supported by the voltage we have
set. That will probably make the clock to the CPU unstable and the system might
not work properly anymore.

This patch introduces a set of synchronization primitives to serialize frequency
transitions, which are to be used as shown below:

cpufreq_freq_transition_begin();

//Perform the frequency change

cpufreq_freq_transition_end();

The _begin() call sends the PRECHANGE notification whereas the _end() call sends
the POSTCHANGE notification. Also, all the necessary synchronization is handled
within these calls. In particular, even drivers which set the ASYNC_NOTIFICATION
flag can also use these APIs for performing frequency transitions (ie., you can
call _begin() from one task, and call the corresponding _end() from a different
task).

The actual synchronization underneath is not that complicated:

The key challenge is to allow drivers to begin the transition from one thread
and end it in a completely different thread (this is to enable drivers that do
asynchronous POSTCHANGE notification from bottom-halves, to also use the same
interface).

To achieve this, a 'transition_ongoing' flag, a 'transition_lock' spinlock and a
wait-queue are added per-policy. The flag and the wait-queue are used in
conjunction to create an "uninterrupted flow" from _begin() to _end(). The
spinlock is used to ensure that only one such "flow" is in flight at any given
time. Put together, this provides us all the necessary synchronization.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Ensure that no timer callback is running since we are about to free
the timer structure.  We cannot guarantee that the call back is called
on the CPU where the timer is running.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

During suspend, we first stop governors and then suspend cpufreq drivers and
resume must be exactly opposite of that. i.e. resume drivers first and then
start governors.

But the current code in resume enables governors first and then resume drivers.
Fix it be changing code sequence there.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Revert commit df86f5df (ACPI / processor: Make it possible to get
APIC ID via GIC).

APIC ID refers the hardware ID of the CPU, which means MPIDR on
ARM/ARM64, but in ACPI 5.0, GIC ID feild in GIC structure have
no explicit definition and may not refer to the MPIDR.

Commit df86f5df assumed that gic->gic_id as MPIDR which may not be
the case, so revert it until the explicit definition of GIC structure
is ready.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The previous commit "ACPICA: Add auto-serialization support for ill-behaved
control methods" introduced the auto-serialization facility as a workaround
that can be enabled by "acpi_auto_serialize":

This feature marks control methods that create named objects as "serialized"
to avoid unwanted AE_ALREADY_EXISTS control method evaluation failures.

Enable method auto-serialization as the default kernel behavior.  The new kernel
parameter is also changed from "acpi_auto_serialize" to "acpi_no_auto_serialize"
to reflect the default behavior.

References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
References: http://www.spinics.net/lists/linux-acpi/msg49496.htmlSigned-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Cannot use a sync_level for methods that have been serialized at load-time
or runtime because this may interfere with any existing use of sync_levels
within the ASL code. So, we simply ignore the sync_level for these methods,
thus preserving any existing sync_level priorities. Note, the use of
sync_levels is actually rather rare within BIOS ASL code.

References: http://www.spinics.net/lists/linux-acpi/msg49496.htmlReported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Reported-by: Sabrina Dubroka <sd@queasysnail.net>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This change adds some additional opcodes that are detected and will
cause a method to be auto-serialized. These opcodes are the various
CreateXField and the FieldUnit opcodes. Lv Zheng.

References: https://bugzilla.kernel.org/show_bug.cgi?id=52191Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This change adds support to automatically mark a control method as
"serialized" if the method creates any named objects. This will
positively prevent the method from being entered by more than one
thread and thus preventing a possible abort when an attempt is
made to create an object twice.

Implemented by parsing all non-serialize control methods at table
load time.

This feature is disabled by default and this patch also adds a new
Linux kernel parameter "acpi_auto_serialize" to allow this feature
to be turned on for a specific boot.

References: https://bugzilla.kernel.org/show_bug.cgi?id=52191Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

According to the reports, the "acpi_serialize" mechanism is broken as:

 A. The parallel method calls can still happen when the interpreter lock is
    released under the following conditions:
    1. External callbacks are invoked, for example, by the region handlers,
       the exception handlers, etc.;
    2. Module level execution is performed when Load/LoadTable opcodes are
       executed, and
    3. The _REG control methods are invoked to complete the region
       registrations.
 B. For the following situations, the interpreter lock need to be released
    even for a serialized method while currently, the lock-releasing
    operation is marked as a no-op by
    acpi_ex_relinquish/reacquire_interpreter() when this mechanism is
    enabled:
    1. Wait opcode is executed,
    2. Acquire opcode is executed, and
    3. Sleep opcode is executed.

This patch removes this mechanism and the internal
acpi_ex_relinquish/reacquire_interpreter() APIs.  Lv Zheng.

References: https://bugzilla.kernel.org/show_bug.cgi?id=52191Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-devfreq:
  PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs

Merge branch 'for-rafael' of git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq into pm-devfreq

Pull devfreq fix for 3.15-rc1 from MyungJoo Ham.

* 'for-rafael' of git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq:
  PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs

* acpi-processor:
  ACPI: Move BAD_MADT_ENTRY() to linux/acpi.h
  ACPI / processor: Make it possible to get APIC ID via GIC
  ACPI / processor: Build idle_boot_override on x86 and ia64
  ACPI / processor: Use ACPI_PROCESSOR_DEVICE_HID instead of "ACPI0007"
  ACPI / processor: Fix acpi_processor_eval_pdc() return value type

The current devfreq_update_status() has the following bugs:
- If previous frequency doesn't have a valid level, it does an out of bounds
  access into the trans_table and causes memory corruption.
- When the new frequency doesn't have a valid level, the time spent in the
  new frequency is counted towards the next valid frequency switch instead of
  being ignored.
- The time spent on the previous frequency is added to the new frequency's
  stats instead of the previous frequency's stats.

This patch fixes all of this.
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>

This patch removes the use of the IRQF_DISABLED flag
from drivers/pnp/resource.c

It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-cpufreq: (30 commits)
  intel_pstate: Set core to min P state during core offline
  cpufreq: Add stop CPU callback to cpufreq_driver interface
  cpufreq: Remove unnecessary braces
  cpufreq: Fix checkpatch errors and warnings
  cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs
  cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE}
  cpufreq: Do not allow ->setpolicy drivers to provide ->target
  cpufreq: arm_big_little: set 'physical_cluster' for each CPU
  cpufreq: arm_big_little: make vexpress driver depend on bL core driver
  cpufreq: SPEAr: Instantiate as platform_driver
  cpufreq: Remove unnecessary variable/parameter 'frozen'
  cpufreq: Remove cpufreq_generic_exit()
  cpufreq: add 'freq_table' in struct cpufreq_policy
  cpufreq: Reformat printk() statements
  cpufreq: Tegra: Use cpufreq_generic_suspend()
  cpufreq: s5pv210: Use cpufreq_generic_suspend()
  cpufreq: exynos: Use cpufreq_generic_suspend()
  cpufreq: Implement cpufreq_generic_suspend()
  cpufreq: suspend governors on system suspend/hibernate
  cpufreq: move call to __find_governor() to cpufreq_init_policy()
  ...

* pm-cpuidle:
  cpuidle: delay enabling interrupts until all coupled CPUs leave idle
  cpuidle: poll state can measure residency
  cpuidle: Move perf multiplier calculation out of the selection loop
  cpuidle: Do not substract exit latency from assumed sleep length
  cpuidle: Ensure menu coefficients stay within domain
  cpuidle: Use actual state latency in menu governor
  cpuidle: rename expected_us to next_timer_us in menu governor

* pm-runtime:
  PM / Runtime: Update runtime_idle() documentation for return value meaning

* pm-sleep:
  PM / sleep: Correct whitespace errors in <linux/pm.h>
  PM: Add missing "freeze" state
  PM / Hibernate: Spelling s/anonymouns/anonymous/
  PM / Runtime: Add missing "it" in comment
  PM / suspend: Remove unnecessary !!
  PCI / PM: Resume runtime-suspended devices later during system suspend
  ACPI / PM: Resume runtime-suspended devices later during system suspend
  PM / sleep: Set pm_generic functions to NULL for !CONFIG_PM_SLEEP
  PM: fix typo in comment
  PM / hibernate: use name_to_dev_t to parse resume
  PM / wakeup: Include appropriate header file in kernel/power/wakelock.c
  PM / sleep: Move prototype declaration to header file kernel/power/power.h
  PM / sleep: Asynchronous threads for suspend_late
  PM / sleep: Asynchronous threads for suspend_noirq
  PM / sleep: Asynchronous threads for resume_early
  PM / sleep: Asynchronous threads for resume_noirq
  PM / sleep: Two flags for async suspend_noirq and suspend_late

* pm-qos:
  PM / QoS: Add type to dev_pm_qos_add_ancestor_request() arguments
  ACPI / LPSS: Support for device latency tolerance PM QoS
  ACPI / scan: Add bind/unbind callbacks to struct acpi_scan_handler
  PM / QoS: Introcuce latency tolerance device PM QoS type
  PM / QoS: Add no_constraints_value field to struct pm_qos_constraints
  PM / QoS: Rename device resume latency QoS items

* pm-domains:
  PM / domains: Turn latency warning into debug message

* pm-drivers:
  PM: Add pm_runtime_suspend|resume_force functions
  PM / runtime: Fetch runtime PM callbacks using a macro

* misc:
  MAINTAINERS: Reorder maintainer addresses for PM and ACPI

* powercap:
  powercap / intel_rapl: spell out SoC names
  powercap / intel_rapl: relax sanity check on energy counters

* acpica: (29 commits)
  ACPICA: Revert "Headers: Deploy #pragma pack (push) and (pop)."
  ACPICA: Update version to 20140214.
  ACPICA: Prevent infinite loops when traversing corrupted lists.
  ACPICA: Debugger: Add missing objects; Traverse linked lists
  ACPICA: Add text: ACPICA policy for new _OSI strings. No functional change.
  ACPICA: Update for _PRP predefined name.
  ACPICA: Cleanup/improve global variable declarations.
  ACPICA: Comment update - no functional change.
  ACPICA: Do not abort _PRT repair on a single subpackage failure.
  ACPICA: Harden _PRT repair code; check for minimum package length.
  ACPICA: Restore code that repairs NULL package elements in return values.
  ACPICA: Properly handle NULL entries in _PRT return packages.
  ACPICA: Update conditional compilation flags for resource dump functions.
  ACPICA: Predefined names: Add support for the _PRP method.
  ACPICA: Headers: Deploy #pragma pack (push) and (pop).
  ACPICA: Add boot option to disable auto return object repair
  ACPICA: acpidump: Remove integer types translation protection.
  ACPICA: acpidump: Add sparse declarators support.
  ACPICA: Add "Windows 2013" string to _OSI support.
  ACPICA: Update version to 20140114.
  ...

* acpi-battery:
  ACPI / AC: recheck adapter status upon battery status changes
  ACPI / battery: call ACPI notifier chain in acpi_battery_notify
  ACPI / battery: move some ACPI_BATTERY_* definitions to header

* acpi-video:
  video / output: Drop display output class support
  fujitsu-laptop: Drop unneeded include
  acer-wmi: Stop selecting VIDEO_OUTPUT_CONTROL
  ACPI / gpu / drm: Stop selecting VIDEO_OUTPUT_CONTROL
  ACPI / video: fix ACPI_VIDEO dependencies

* acpi-cleanup:
  ACPI: Remove duplicate definitions of PREFIX
  ACPI / tables: Replace printk with pr_*

* acpi-thermal:
  ACPI / thermal: make acpi_thermal_check asynchronous on resume

* acpi-pci:
  ACPI / PCI: Do not call ISA-specific code if ISA is not supported

* acpi-lpss:
  ACPI / LPSS: Add Intel BayTrail ACPI mode PWM

* acpi-button:
  ACPI / button: Add ACPI Button event via netlink routine

rjw> Why exactly are they errors?
Geert> checkpatch.pl says: "WARNING: please, no space before tabs",
       Vim (with "let c_space_errors=1") shows them in red.
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Change to use the new ->stop_cpu() callback to do clean up during CPU
hotplug. The requested P state for an offline core will be used by the
hardware coordination function to select the package P state. If the
core is under load when it is offlined it will fix the package P state
floor to the requested P state of offline core.
Reported-by: Patrick Marlier <patrick.marlier@gmail.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This callback allows the driver to do clean up before the CPU is
completely down and its state cannot be modified.  This is used
by the intel_pstate driver to reduce the requested P state prior to
the core going away.  This is required because the requested P state
of the offline core is used to select the package P state. This
effectively sets the floor package P state to the requested P state on
the offline core.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
[rjw: Minor modifications]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove unnecessary braces from a single statement.
Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix 2 checkpatch errors about using assignment in if condition,
1 checkpatch error about a required space after comma
and 3 warnings about line over 80 characters.
Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

According to the data provided by HW Team, at least 12 internal platform
clock cycles are required to stabilize a DFS clock switch on FSL e500mc Socs.
This patch replaces the CPUFREQ_ETERNAL with appropriate HW clock transition
latency to make DFS governors work normally on Freescale e500mc boards.
Signed-off-by: Zhuoyu Zhang <Zhuoyu.Zhang@freescale.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

For a few subsystems I am the person who actually applies patches
and people don't CC me on patch submissions, because my address is
not the first one in the given MAINTAINERS item.

Reorder PM and ACPI maintainer addresses in MAINTAINERS to make
the probability of that a bit smaller.
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Acked-by: Pavel Machek <pavel@ucw.cz>

As of commit 45f0a85c ('PM / Runtime: Rework the "runtime idle"
helper routine'), the return value of ->runtime_idle() is no longer
ignored by the PM core, but used to decide whether to suspend the
device or not.

Update the documentation to match the code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

It was only ever used by the ACPI video driver, and that only use case
vanished over 3 years ago (see commit 677bd810, "ACPI video: remove
output switching control".) So this is dead code and I guess we can
remove it now.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The fujitsu-laptop driver includes <linux/video_output.h> but doesn't
call any of its functions. Drop the unneeded include to avoid
unnecessary driver rebuilds.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI_VIDEO no longer depends on VIDEO_OUTPUT_CONTROL, so drivers which
want to select ACPI_VIDEO no longer have to select
VIDEO_OUTPUT_CONTROL.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI_VIDEO no longer depends on VIDEO_OUTPUT_CONTROL, so drivers which
want to select ACPI_VIDEO no longer have to select
VIDEO_OUTPUT_CONTROL.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI_VIDEO stopped depending on VIDEO_OUTPUT_CONTROL over 3 years ago
(see commit 677bd810, "ACPI video: remove output switching control".)
So it's about time to remove the Kconfig dependency between these two
options.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>