Introduce WO chip support to mtk wed driver. MTK WED WO is used to
implement RX Wireless Ethernet Dispatch and offload traffic received by
wlan nic to the wired interface.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce WED mcu support used to configure WED WO chip.
This is a preliminary patch in order to add RX Wireless
Ethernet Dispatch available on MT7986 SoC.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document the binding for the RX Wireless Ethernet Dispatch core on the
MT7986 ethernet driver used to offload traffic received by WLAN NIC and
forwarded to LAN/WAN one.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to TX Wireless Ethernet Dispatch, introduce RX Wireless Ethernet
Dispatch to offload traffic received by the wlan interface to lan/wan
one.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

HINIC is marked orphan for 14 months from the commit "5cfe5109",
but there are lots of HINIC in use.

I have a SP582 NIC (hi1822 inside which is a kind of HINIC SOC),
and implement based on hinic driver, and if there are some patches
for HINIC, I can test and do some code review.

I'm active in linux contribution, if possible,
I want to take the hinic maintainership.

Add my email here to receive patches.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/can/pch_can.c
  ae64438b ("can: dev: fix skb drop check")
  1dd1b521 ("can: remove obsolete PCH CAN driver")
https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, wifi, can and bpf.

  Current release - new code bugs:

   - can: af_can: can_exit(): add missing dev_remove_pack() of
     canxl_packet

  Previous releases - regressions:

   - bpf, sockmap: fix the sk->sk_forward_alloc warning

   - wifi: mac80211: fix general-protection-fault in
     ieee80211_subif_start_xmit()

   - can: af_can: fix NULL pointer dereference in can_rx_register()

   - can: dev: fix skb drop check, avoid o-o-b access

   - nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()

  Previous releases - always broken:

   - bpf: fix wrong reg type conversion in release_reference()

   - gso: fix panic on frag_list with mixed head alloc types

   - wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()

   - wifi: mac80211: set TWT Information Frame Disabled bit as 1

   - eth: macsec offload related fixes, make sure to clear the keys from
     memory

   - tun: fix memory leaks in the use of napi_get_frags

   - tun: call napi_schedule_prep() to ensure we own a napi

   - tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent

   - ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
     network

   - tipc: fix a msg->req tlv length check

   - sctp: clear out_curr if all frag chunks of current msg are pruned,
     avoid list corruption

   - mctp: fix an error handling path in mctp_init(), avoid leaks"

* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
  MAINTAINERS: Move Vivien to CREDITS
  net: macvlan: fix memory leaks of macvlan_common_newlink
  ethernet: tundra: free irq when alloc ring failed in tsi108_open()
  net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
  ethernet: s2io: disable napi when start nic failed in s2io_card_up()
  net: atlantic: macsec: clear encryption keys from the stack
  net: phy: mscc: macsec: clear encryption keys when freeing a flow
  stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
  stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
  stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
  cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
  mctp: Fix an error handling path in mctp_init()
  stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
  net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
  net: cpsw: disable napi in cpsw_ndo_open()
  iavf: Fix VF driver counting VLAN 0 filters
  ice: Fix spurious interrupt during removal of trusted VF
  net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
  net/mlx5e: E-Switch, Fix comparing termination table instance
  ...

Saeed Mahameed says:

====================
mlx5 fixes 2022-11-02

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
  net/mlx5e: E-Switch, Fix comparing termination table instance
  net/mlx5e: TC, Fix wrong rejection of packet-per-second policing
  net/mlx5e: Fix tc acts array not to be dependent on enum order
  net/mlx5e: Fix usage of DMA sync API
  net/mlx5e: Add missing sanity checks for max TX WQE size
  net/mlx5: fw_reset: Don't try to load device in case PCI isn't working
  net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode
  net/mlx5: Allow async trigger completion execution on single CPU systems
  net/mlx5: Bridge, verify LAG state when adding bond to bridge
====================

Link: https://lore.kernel.org/r/20221109184050.108379-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-11-09 (ice, iavf)

This series contains updates to ice and iavf drivers.

Norbert stops disabling VF queues that are not enabled for ice driver.

Michal stops accounting of VLAN 0 filter to match expectations of PF
driver for iavf.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: Fix VF driver counting VLAN 0 filters
  ice: Fix spurious interrupt during removal of trusted VF
====================

Link: https://lore.kernel.org/r/20221110003744.201414-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It's not necessary to free netdev allocated with devm_alloc_etherdev()
and using free_netdev() leads to double free.

Fixes: fd3040b9 ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20221109150116.2988194-1-weiyongjun@huaweicloud.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Last patch from Vivien was nearly 3 years ago and he has not reviewed or
responded to DSA patches since then, move to CREDITS.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221109231907.621678-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jonathan reports crashes when running net-next in Meta's fleet.
Stats collection uses ethtool -I which does a per-op policy dump
to check if stats are supported. We don't initialize the dumpit
information if doit succeeds due to evaluation short-circuiting.

The crash may look like this:

   BUG: kernel NULL pointer dereference, address: 0000000000000cc0
   RIP: 0010:netlink_policy_dump_add_policy+0x174/0x2a0
     ctrl_dumppolicy_start+0x19f/0x2f0
     genl_start+0xe7/0x140

Or we may trigger a warning:

   WARNING: CPU: 1 PID: 785 at net/netlink/policy.c:87 netlink_policy_dump_get_policy_idx+0x79/0x80
   RIP: 0010:netlink_policy_dump_get_policy_idx+0x79/0x80
     ctrl_dumppolicy_put_op+0x214/0x360

depending on what garbage we pick up from the stack.
Reported-by: Jonathan Lemon <bsd@meta.com>
Fixes: 26588edb ("genetlink: support split policies in ctrl_dumppolicy_put_op()")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221109183254.554051-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When a devlink port is unregistered, its type is expected to be unset or
otherwise a WARNING is generated [1]. This was supposed to be handled by
cited commit by clearing the type upon 'NETDEV_PRE_UNINIT'.

The assumption was that no other events can be generated for the netdev
after this event, but this proved to be wrong. After the event is
generated, netdev_wait_allrefs_any() will rebroadcast a
'NETDEV_UNREGISTER' until the netdev's reference count drops to 1. This
causes devlink to set the port type back to Ethernet.

Fix by only setting and clearing the port type upon 'NETDEV_POST_INIT'
and 'NETDEV_PRE_UNINIT', respectively. For all other events, preserve
the port type.

[1]
WARNING: CPU: 0 PID: 11 at net/core/devlink.c:9998 devl_port_unregister+0x2f6/0x390 net/core/devlink.c:9998
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u4:1 Not tainted 6.1.0-rc3-next-20221107-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: netns cleanup_net
RIP: 0010:devl_port_unregister+0x2f6/0x390 net/core/devlink.c:9998
[...]
Call Trace:
 <TASK>
 __nsim_dev_port_del+0x1bb/0x240 drivers/net/netdevsim/dev.c:1433
 nsim_dev_port_del_all drivers/net/netdevsim/dev.c:1443 [inline]
 nsim_dev_reload_destroy+0x171/0x510 drivers/net/netdevsim/dev.c:1660
 nsim_dev_reload_down+0x6b/0xd0 drivers/net/netdevsim/dev.c:968
 devlink_reload+0x1c2/0x6b0 net/core/devlink.c:4501
 devlink_pernet_pre_exit+0x104/0x1c0 net/core/devlink.c:12609
 ops_pre_exit_list net/core/net_namespace.c:159 [inline]
 cleanup_net+0x451/0xb10 net/core/net_namespace.c:594
 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e4/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
 </TASK>

Fixes: 02a68a47 ("net: devlink: track netdev with devlink_port assigned")
Reported-by: syzbot+85e47e1a08b3e159b159@syzkaller.appspotmail.com
Reported-by: syzbot+c2ca18f0fccdd1f09c66@syzkaller.appspotmail.com
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20221110085150.520800-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Long Li says:

====================
Introduce Microsoft Azure Network Adapter (MANA) RDMA driver [netdev prep]

The first 11 patches which modify the MANA Ethernet driver to support
RDMA driver.

* 'mana-shared-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  net: mana: Define data structures for protection domain and memory registration
  net: mana: Define data structures for allocating doorbell page from GDMA
  net: mana: Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES
  net: mana: Define max values for SGL entries
  net: mana: Move header files to a common location
  net: mana: Record port number in netdev
  net: mana: Export Work Queue functions for use by RDMA driver
  net: mana: Set the DMA device max segment size
  net: mana: Handle vport sharing between devices
  net: mana: Record the physical address for doorbell page region
  net: mana: Add support for auxiliary device
====================

Link: https://lore.kernel.org/all/1667502990-2559-1-git-send-email-longli@linuxonhyperv.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If ethtool_ops::get_drvinfo() callback isn't set,
ethtool_get_drvinfo() will fill the ethtool_drvinfo::name and
ethtool_drvinfo::bus_info fields.

However, if the driver provides the callback function, those two
fields are not touched. This means that the driver has to fill these
itself.

Allow the driver to leave those two fields empty and populate them in
such case. This way, the driver can rely on the default values for the
name and the bus_info. If the driver provides values, do nothing.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20221108035754.2143-1-mailhol.vincent@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull btrfs fixes from David Sterba:

 - revert memory optimization for scrub blocks, this misses errors in
   2nd and following blocks

 - add exception for ENOMEM as reason for transaction abort to not print
   stack trace, syzbot has reported many

 - zoned fixes:
      - fix locking imbalance during scrub
      - initialize zones for seeding device
      - initialize zones for cloned device structures

 - when looking up device, change assertion to a real check as some of
   the search parameters can be passed by ioctl, reported by syzbot

 - fix error pointer check in self tests

* tag 'for-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: fix locking imbalance on scrub
  btrfs: zoned: initialize device's zone info for seeding
  btrfs: zoned: clone zoned device info when cloning a device
  Revert "btrfs: scrub: use larger block size for data extent scrub"
  btrfs: don't print stack trace when transaction is aborted due to ENOMEM
  btrfs: selftests: fix wrong error check in btrfs_free_dummy_root()
  btrfs: fix match incorrectly in dev_args_match_device

Pull soundwire fixes from Vinod Koul:
 "Two qcom driver fixes for broadcast completion reinit and check for
  outanding writes. And a lone Intel driver fix for clock stop timeout"

* tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: qcom: check for outanding writes before doing a read
  soundwire: qcom: reinit broadcast completion
  soundwire: intel: Initialize clock stop timeout

Pull phy fixes from Vinod Koul:
 "A bunch of odd driver fixes and a MAINTAINER email update:

   - Update Kishon's email

   - stms32 error code fix in driver probe

   - tegra: fix for checking valid pointer

   - qcom_qmp: null deref fix

   - sunplus: error check fix

   - ralink: add missing sentinel to table"

* tag 'phy-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ralink: mt7621-pci: add sentinel to quirks table
  phy: sunplus: Fix an IS_ERR() vs NULL bug in sp_usb_phy_probe
  phy: qcom-qmp-combo: fix NULL-deref on runtime resume
  phy: tegra: xusb: Fix crash during pad power on/down
  phy: stm32: fix an error code in probe
  MAINTAINERS: Update Kishon's email address in GENERIC PHY FRAMEWORK

Pull hwspinlock updates from Bjorn Andersson:
 "I apparently had missed tagging and sending this set of changes out
  during the 6.1 merge window. But did get the associated dts changes
  depending on this merged. The result is a regression in 6.1-rc on the
  affected, older, Qualcomm platforms - in for form of them not booting.

  So while these weren't regression fixes originally, they are now. It's
  not introducing new beahavior, but simply extending the existing new
  Devicetree model, to cover remaining platforms:

   - extend the DeviceTree binding and implementation for the Qualcomm
     hardware spinlock on some older platforms to follow the style of
     the newer ones where the DeviceTree representation does not rely on
     an intermediate syscon node"

* tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974
  hwspinlock: qcom: add support for MMIO on older SoCs
  hwspinlock: qcom: correct MMIO max register for newer SoCs
  dt-bindings: hwlock: qcom-hwspinlock: correct example indentation
  dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs

kmemleak reports memory leaks in macvlan_common_newlink, as follows:

 ip link add link eth0 name .. type macvlan mode source macaddr add
 <MAC-ADDR>

kmemleak reports:

unreferenced object 0xffff8880109bb140 (size 64):
  comm "ip", pid 284, jiffies 4294986150 (age 430.108s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff  ..........Z.....
    80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b  ..............kk
  backtrace:
    [<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300
    [<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0
    [<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170
    [<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0
    [<ffffffff81b6797e>] macvlan_newlink+0xe/0x20
    [<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50
    [<ffffffff81d98278>] rtnl_newlink+0x48/0x70
    ...

In the scenario where the macvlan mode is configured as 'source',
macvlan_changelink_sources() will be execured to reconfigure list of
remote source mac addresses, at the same time, if register_netdevice()
return an error, the resource generated by macvlan_changelink_sources()
is not cleaned up.

Using this patch, in the case of an error, it will execute
macvlan_flush_sources() to ensure that the resource is cleaned up.

Fixes: aa5fd0fb ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When alloc tx/rx ring failed in tsi108_open(), it doesn't free irq. Fix
it.

Fixes: 5e123b84 ("[PATCH] Add tsi108/9 On Chip Ethernet device driver support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109044016.126866-1-shaozhengchao@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When failed to init rxq or txq in mv643xx_eth_open() for opening device,
napi isn't disabled. When open mv643xx_eth device next time, it will
trigger a BUG_ON() in napi_enable(). Compile tested only.

Fixes: 2257e05c ("mv643xx_eth: get rid of receive-side locking")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109025432.80900-1-shaozhengchao@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.

Fixes: 5f490c96 ("S2io: Fixed synchronization between scheduling of napi with card reset and close")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).

The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition. A new
warning in clang will catch this at compile time:

  drivers/net/ethernet/microsoft/mana/mana_en.c:382:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = mana_start_xmit,
                                    ^~~~~~~~~~~~~~~
  1 error generated.

The return type of mana_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Link: https://github.com/ClangBuiltLinux/linux/issues/1750Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
[nathan: Rebase on net-next and resolve conflicts
         Add note about new clang warning]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221109002629.1446680-1-nathan@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Antoine Tenart says:

====================
macsec: clear encryption keys in h/w drivers

Commit aaab73f8 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading but some h/w drivers did a copy of the key
which need to be zeroed as well.

The MSCC PHY driver can actually be converted not to copy the encryption
key at all, but such patch would be quite difficult to backport. I'll
send a following up patch doing this in net-next once this series lands.

Tested on the MSCC PHY but not on the atlantic NIC.
====================

Link: https://lore.kernel.org/r/20221108153459.811293-1-atenart@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit aaab73f8 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the atlantic driver made a copy and did
not clear it. Fix this.

[4 Fixes tags below, all part of the same series, no need to split this]

Fixes: 9ff40a75 ("net: atlantic: MACSec ingress offload implementation")
Fixes: b8f8a0b7 ("net: atlantic: MACSec ingress offload HW bindings")
Fixes: 27736563 ("net: atlantic: MACSec egress offload implementation")
Fixes: 9d106c6d ("net: atlantic: MACSec egress offload HW bindings")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit aaab73f8 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the MSCC PHY driver made a copy, kept
it in the flow data and did not clear it when freeing a flow. Fix this.

Fixes: 28c5107a ("net: phy: mscc: macsec support")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

After searching for a protocol handler in dev_gro_receive, checking for
failure is redundant. Skip the failure code after finding the
corresponding handler.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221108123320.GA59373@debianSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Yang Yingliang says:

====================
stmmac: dwmac-loongson: fixes three leaks

patch #2 fixes missing pci_disable_device() in the error path in probe()
patch #1 and pach #3 fix missing pci_disable_msi() and of_node_put() in
error and remove() path.
====================

Link: https://lore.kernel.org/r/20221108114647.4144952-1-yangyingliang@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The node returned by of_get_child_by_name() with refcount decremented,
of_node_put() needs be called when finish using it. So add it in the
error path in loongson_dwmac_probe() and in loongson_dwmac_remove().

Fixes: 2ae34111 ("stmmac: dwmac-loongson: fix invalid mdio_node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add missing pci_disable_device() in the error path in loongson_dwmac_probe().

Fixes: 30bba69d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

pci_enable_msi() has been called in loongson_dwmac_probe(),
so pci_disable_msi() needs be called in remove path and error
path of probe().

Fixes: 30bba69d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The MANA hardware support protection domain and memory registration for use
in RDMA environment. Add those definitions and expose them for use by the
RDMA driver.
Signed-off-by: Ajay Sharma <sharmaajay@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-12-git-send-email-longli@linuxonhyperv.comReviewed-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The RDMA device needs to allocate doorbell pages for each user context.
Define the GDMA data structures for use by the RDMA driver.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-11-git-send-email-longli@linuxonhyperv.comAcked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

When doing memory registration, the PF may respond with
GDMA_STATUS_MORE_ENTRIES to indicate a follow request is needed. This is
not an error and should be processed as expected.
Signed-off-by: Ajay Sharma <sharmaajay@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-10-git-send-email-longli@linuxonhyperv.comAcked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The number of maximum SGl entries should be computed from the maximum
WQE size for the intended queue type and the corresponding OOB data
size. This guarantees the hardware queue can successfully queue requests
up to the queue depth exposed to the upper layer.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-9-git-send-email-longli@linuxonhyperv.comAcked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

In preparation to add MANA RDMA driver, move all the required header files
to a common location for use by both Ethernet and RDMA drivers.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-8-git-send-email-longli@linuxonhyperv.comAcked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The port number is useful for user-mode application to identify this
net device based on port index. Set to the correct value in ndev.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-7-git-send-email-longli@linuxonhyperv.comAcked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

RDMA device may need to create Ethernet device queues for use by Queue
Pair type RAW. This allows a user-mode context accesses Ethernet hardware
queues. Export the supporting functions for use by the RDMA driver.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-6-git-send-email-longli@linuxonhyperv.comAcked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

MANA hardware doesn't have any restrictions on the DMA segment size, set it
to the max allowed value.
Signed-off-by: Ajay Sharma <sharmaajay@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-5-git-send-email-longli@linuxonhyperv.comAcked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>