Don't try to "optimize" rds_page_copy_user() by using kmap_atomic() and
the unsafe atomic user mode accessor functions.  It's actually slower
than the straightforward code on any reasonable modern CPU.

Back when the code was written (although probably not by the time it was
actually merged, though), 32-bit x86 may have been the dominant
architecture.  And there kmap_atomic() can be a lot faster than kmap()
(unless you have very good locality, in which case the virtual address
caching by kmap() can overcome all the downsides).

But these days, x86-64 may not be more populous, but it's getting there
(and if you care about performance, it's definitely already there -
you'd have upgraded your CPU's already in the last few years).  And on
x86-64, the non-kmap_atomic() version is faster, simply because the code
is simpler and doesn't have the "re-try page fault" case.

People with old hardware are not likely to care about RDS anyway, and
the optimization for the 32-bit case is simply buggy, since it doesn't
verify the user addresses properly.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sdio: fix SDIO suspend/resume regression

Fix SDIO suspend/resume regression introduced by 4c2ef25f "mmc: fix
all hangs related to mmc/sd card insert/removal during suspend/resume":

  PM: Syncing filesystems ... done.
  Freezing user space processes ... (elapsed 0.01 seconds) done.
  Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  Suspending console(s) (use no_console_suspend to debug)
  pm_op(): platform_pm_suspend+0x0/0x5c returns -38
  PM: Device pxa2xx-mci.0 failed to suspend: error -38
  PM: Some devices failed to suspend

4c2ef25f moved the card removal/insertion mechanism out of MMC's
suspend/resume path and into pm notifiers (mmc_pm_notify), and that
broke SDIO's expectation that mmc_suspend_host() will remove the card,
and squash the error, in case -ENOSYS is returned from the bus suspend
handler (mmc_sdio_suspend() in this case).

mmc_sdio_suspend() is using this whenever at least one of the card's SDIO
function drivers does not have suspend/resume handlers - in that case
it is agreed to force removal of the entire card.

This patch fixes this regression by trivially bringing back that part of
mmc_suspend_host(), which was removed by 4c2ef25f.
Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: <stable@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Chris Ball <cjb@laptop.org>

Merge branch 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Preserve timer state in remove_hrtimer()

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add Cando touch screen 15.6-inch product id
  HID: Add MULTI_INPUT quirk for turbox/mosart touchscreen
  HID: hidraw, fix a NULL pointer dereference in hidraw_write
  HID: hidraw, fix a NULL pointer dereference in hidraw_ioctl

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  ubd: fix incorrect sector handling during request restart
  ps3disk: passing wrong variable to bvec_kunmap_irq()

Commit f81f2f7c (ubd: drop unnecessary rq->sector manipulation)
dropped request->sector manipulation in preparation for global request
handling cleanup; unfortunately, it incorrectly assumed that the
updated sector wasn't being used.

ubd tries to issue as many requests as possible to io_thread.  When
issuing fails due to memory pressure or other reasons, the device is
put on the restart list and issuing stops.  On IO completion, devices
on the restart list are scanned and IO issuing is restarted.

ubd issues IOs sg-by-sg and issuing can be stopped in the middle of a
request, so each device on the restart queue needs to remember where
to restart in its current request.  ubd needs to keep track of the
issue position itself because,

* blk_rq_pos(req) is now updated by the block layer to keep track of
  _completion_ position.

* Multiple io_req's for the current request may be in flight, so it's
  difficult to tell where blk_rq_pos(req) currently is.

Add ubd->rq_pos to keep track of the issue position and use it to
correctly restart io_req issue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Tested-by: Chris Frey <cdfrey@foursquare.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

If you build aout support as a module, you'll want these exported.
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tony Luck reports that the addition of the access_ok() check in commit
0eead9ab ("Don't dump task struct in a.out core-dumps") broke the
ia64 compile due to missing the necessary header file includes.

Rather than add yet another include (<asm/unistd.h>) to make everything
happy, just uninline the silly core dump helper functions and move the
bodies to fs/exec.c where they make a lot more sense.

dump_seek() in particular was too big to be an inline function anyway,
and none of them are in any way performance-critical.  And we really
don't need to mess up our include file headers more than they already
are.
Reported-and-tested-by: Tony Luck <tony.luck@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ehea: Fix a checksum issue on the receive path
  net: allow FEC driver to use fixed PHY support
  tg3: restore rx_dropped accounting
  b44: fix carrier detection on bind
  net: clear heap allocations for privileged ethtool actions
  NET: wimax, fix use after free
  ATM: iphase, remove sleep-inside-atomic
  ATM: mpc, fix use after free
  ATM: solos-pci, remove use after free
  net/fec: carrier off initially to avoid root mount failure
  r8169: use device model DMA API
  r8169: allocate with GFP_KERNEL flag when able to sleep

akiphie points out that a.out core-dumps have that odd task struct
dumping that was never used and was never really a good idea (it goes
back into the mists of history, probably the original core-dumping
code).  Just remove it.

Also do the access_ok() check on dump_write().  It probably doesn't
matter (since normal filesystems all seem to do it anyway), but he
points out that it's normally done by the VFS layer, so ...

[ I suspect that we should possibly do "vfs_write()" instead of
  calling ->write directly.  That also does the whole fsnotify and write
  statistics thing, which may or may not be a good idea. ]

And just to be anal, do this all for the x86-64 32-bit a.out emulation
code too, even though it's not enabled (and won't currently even
compile)
Reported-by: akiphie <akiphie@lavabit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The race is described as follows:

CPU X                                 CPU Y
remove_hrtimer
// state & QUEUED == 0
timer->state = CALLBACK
unlock timer base
timer->f(n) //very long
                                  hrtimer_start
                                    lock timer base
                                    remove_hrtimer // no effect
                                    hrtimer_enqueue
                                    timer->state = CALLBACK |
                                                   QUEUED
                                    unlock timer base
                                  hrtimer_start
                                    lock timer base
                                    remove_hrtimer
                                        mode = INACTIVE
                                        // CALLBACK bit lost!
                                    switch_hrtimer_base
                                            CALLBACK bit not set:
                                                    timer->base
                                                    changes to a
                                                    different CPU.
lock this CPU's timer base

The bug was introduced with commit ca109491 (hrtimer: removing all ur
callback modes) in 2.6.29

[ tglx: Feed new state via local variable and add a comment. ]
Signed-off-by: Salman Qazi <sqazi@google.com>
Cc: akpm@linux-foundation.org
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20101012142351.8485.21823.stgit@dungbeetle.mtv.corp.google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  ioat2: fix performance regression

* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux:
  nfsd: fix BUG at fs/nfsd/nfsfh.h:199 on unlink

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ring-buffer: Fix typo of time extends per page
  perf, MIPS: Support cross compiling of tools/perf for MIPS
  perf: Fix incorrect copy_from_user() usage

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: relax ioremap prohibition (309caa9c) for -final and -stable
  ARM: 6440/1: ep93xx: DMA: fix channel_disable
  cpuimx27: fix i2c bus selection
  cpuimx27: fix compile when ULPI is selected
  ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9
  ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors
  ARM: fix section mismatch warnings in Versatile Express
  ARM: 6412/1: kprobes-decode: add support for MOVW instruction
  ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags
  ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: iommu-load cam register before flushing the entry

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: Silent spurious error message
  drm/radeon/kms: fix bad cast/shift in evergreen.c
  drm/radeon/kms: make TV/DFP table info less verbose
  drm/radeon/kms: leave certain CP int bits enabled
  drm/radeon/kms: avoid corner case issue with unmappable vram V2

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, numa: For each node, register the memory blocks actually used
  x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order
  x86, mce, therm_throt.c: Fix missing curly braces in error handling logic

Commit 07934481 "DMAENGINE: generic channel status v2" changed the interface for
how dma channel progress is retrieved.  It inadvertently exported an internal
helper function ioat_tx_status() instead of ioat_dma_tx_status().  The latter
polls the hardware to get the latest completion state, while the helper just
evaluates the current state without touching hardware.  The effect is that we
end up waiting for completion timeouts or descriptor allocation errors before
the completion state is updated.

iperf (before fix):
[SUM]  0.0-41.3 sec   364 MBytes  73.9 Mbits/sec

iperf (after fix):
[SUM]  0.0- 4.5 sec   499 MBytes   940 Mbits/sec

This is a regression starting with 2.6.35.

Cc: <stable@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: Richard Scobie <richard@sauce.co.nz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Currently we set all skbs with CHECKSUM_UNNECESSARY, even
those whose protocol we don't know. This patch just
add the CHECKSUM_COMPLETE tag for non TCP/UDP packets.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As of commit 43a9aa64 "NFSD:
Fill in WCC data for REMOVE, RMDIR, MKNOD, and MKDIR", we sometimes call
fh_unlock on a filehandle that isn't fully initialized.

We should fix up the callers, but as a quick fix it is also sufficient
just to remove this assertion.
Reported-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

At least one board using the FEC driver does not have a conventional
PHY attached to it, it is directly connected to a somewhat simple
ethernet switch (the board is the SnapGear/LITE, and the attached
4-port ethernet switch is a RealTek RTL8305). This switch does not
present the usual register interface of a PHY, it presents nothing.
So a PHY scan will find nothing - it finds ID's of 0 for each PHY
on the attached MII bus.

After the FEC driver was changed to use phylib for supporting PHYs
it no longer works on this particular board/switch setup.

Add code support to use a fixed phy if no PHY is found on the MII bus.
This is based on the way the cpmac.c driver solved this same problem.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This add the product id of the touch screen found on ACER Aspire 5738PZ.  Works
with hid-cando driver.

Signed-off-by: Francois Jaouen<francois.jaouen@laposte.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

... but produce a big warning about the problem as encouragement
for people to fix their drivers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

When channel_disable() is called, it disables per channel interrupts and
waits until channels state becomes STATE_STALL, and then disables the
channel. Now, if the DMA transfer is disabled while the channel is in
STATE_NEXT we will not wait anything and disable the channel immediately.
This seems to cause weird data corruption for example in audio transfers.

Fix is to wait while we are in STATE_NEXT or STATE_ON and only then
disable the channel.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This should pass "buf" to bvec_kunmap_irq() instead of "bv".  The api is
like kmap_atomic() instead of kmap().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Move TSC reset out of vmcb_init
  KVM: x86: Fix SVM VMCB reset

Time stamps for the ring buffer are created by the difference between
two events. Each page of the ring buffer holds a full 64 bit timestamp.
Each event has a 27 bit delta stamp from the last event. The unit of time
is nanoseconds, so 27 bits can hold ~134 milliseconds. If two events
happen more than 134 milliseconds apart, a time extend is inserted
to add more bits for the delta. The time extend has 59 bits, which
is good for ~18 years.

Currently the time extend is committed separately from the event.
If an event is discarded before it is committed, due to filtering,
the time extend still exists. If all events are being filtered, then
after ~134 milliseconds a new time extend will be added to the buffer.

This can only happen till the end of the page. Since each page holds
a full timestamp, there is no reason to add a time extend to the
beginning of a page. Time extends can only fill a page that has actual
data at the beginning, so there is no fear that time extends will fill
more than a page without any data.

When reading an event, a loop is made to skip over time extends
since they are only used to maintain the time stamp and are never
given to the caller. As a paranoid check to prevent the loop running
forever, with the knowledge that time extends may only fill a page,
a check is made that tests the iteration of the loop, and if the
iteration is more than the number of time extends that can fit in a page
a warning is printed and the ring buffer is disabled (all of ftrace
is also disabled with it).

There is another event type that is called a TIMESTAMP which can
hold 64 bits of data in the theoretical case that two events happen
18 years apart. This code has not been implemented, but the name
of this event exists, as well as the structure for it. The
size of a TIMESTAMP is 16 bytes, where as a time extend is only
8 bytes. The macro used to calculate how many time extends can fit on
a page used the TIMESTAMP size instead of the time extend size
cutting the amount in half.

The following test case can easily trigger the warning since we only
need to have half the page filled with time extends to trigger the
warning:

 # cd /sys/kernel/debug/tracing/
 # echo function > current_tracer
 # echo 'common_pid < 0' > events/ftrace/function/filter
 # echo > trace
 # echo 1 > trace_marker
 # sleep 120
 # cat trace

Enabling the function tracer and then setting the filter to only trace
functions where the process id is negative (no events), then clearing
the trace buffer to ensure that we have nothing in the buffer,
then write to trace_marker to add an event to the beginning of a page,
sleep for 2 minutes (only 35 seconds is probably needed, but this
guarantees the bug), and then finally reading the trace which will
trigger the bug.

This patch fixes the typo and prevents the false positive of that warning.
Reported-by: Hans J. Koch <hjk@linutronix.de>
Tested-by: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Changes:
 v4: Fix the cosmetic issue of redundant dot-ops
 v3: Change rmb() to use SYNC
 v2: Include mips unistd.h and define rmb()/cpu_relax() in tools/perf/perf.h
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

I see the following error message in my kernel log from time to time:
radeon 0000:07:00.0: ffff88007c334000 reserve failed for wait
radeon 0000:07:00.0: ffff88007c334000 reserve failed for wait

After investigation, it turns out that there's nothing to be afraid of
and everything works as intended. So remove the spurious log message.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Missing parens.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=30718Reported-by: Dave Gilbert <freedesktop@treblig.org>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Make TV standard and DFP table revisions debug only.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

These bits are used for internal communication and should
be left enabled.  This may fix s/r issues on some systems.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

We should not allocate any object into unmappable vram if we
have no means to access them which on all GPU means having the
CP running and on newer GPU having the blit utility working.

This patch limit the vram allocation to visible vram until
we have acceleration up and running.

Note that it's more than unlikely that we run into any issue
related to that as when acceleration is not woring userspace
should allocate any object in vram beside front buffer which
should fit in visible vram.

V2 use real_vram_size as mc_vram_size could be bigger than
   the actual amount of vram

[airlied: fixup r700_cp_stop case]
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

perf events: repair incorrect use of copy_from_user

This makes the perf_event_period() return 0 instead of
-EFAULT on success.

Signed-off-by: John Blackwood<john.blackwood@ccur.com>
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100928220311.GA18145@tsunami.ccur.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This device generates ABS_Z and ABS_RX events, while it should be
generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves
this issue.

Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/Signed-off-by: Pierre BAILLY <pierre@substantiel.fr>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This patch disables the fanotify syscalls by just not building them and
letting the cond_syscall() statements in kernel/sys_ni.c redirect them
to sys_ni_syscall().

It was pointed out by Tvrtko Ursulin that the fanotify interface did not
include an explicit prioritization between groups.  This is necessary
for fanotify to be usable for hierarchical storage management software,
as they must get first access to the file, before inotify-like notifiers
see the file.

This feature can be added in an ABI compatible way in the next release
(by using a number of bits in the flags field to carry the info) but it
was suggested by Alan that maybe we should just hold off and do it in
the next cycle, likely with an (new) explicit argument to the syscall.
I don't like this approach best as I know people are already starting to
use the current interface, but Alan is all wise and noone on list backed
me up with just using what we have.  I feel this is needlessly ripping
the rug out from under people at the last minute, but if others think it
needs to be a new argument it might be the best way forward.

Three choices:
Go with what we got (and implement the new feature next cycle).  Add a
new field right now (and implement the new feature next cycle).  Wait
till next cycle to release the ABI (and implement the new feature next
cycle).  This is number 3.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>