When using select()/poll()/epoll() with a non-blocking ISOTP socket to
wait for when non-blocking write is possible, a false EPOLLOUT event
is sometimes returned. This can happen at least after sending a
message which must be split to multiple CAN frames.

The reason is that isotp_sendmsg() returns -EAGAIN when tx.state is
not equal to ISOTP_IDLE and this behavior is not reflected in
datagram_poll(), which is used in isotp_ops.

This is fixed by introducing ISOTP-specific poll function, which
suppresses the EPOLLOUT events in that case.

v2: https://lore.kernel.org/all/20230302092812.320643-1-michal.sojka@cvut.cz
v1: https://lore.kernel.org/all/20230224010659.48420-1-michal.sojka@cvut.cz
    https://lore.kernel.org/all/b53a04a2-ba1f-3858-84c1-d3eb3301ae15@hartkopp.netSigned-off-by: Michal Sojka <michal.sojka@cvut.cz>
Reported-by: Jakub Jira <jirajak2@fel.cvut.cz>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/20230331125511.372783-1-michal.sojka@cvut.cz
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

isotp.c was still using sock_recv_timestamp() which does not provide
control messages to detect dropped PDUs in the receive path.

Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230330170248.62342-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In the j1939_tp_tx_dat_new() function, an out-of-bounds memory access
could occur during the memcpy() operation if the size of skb->cb is
larger than the size of struct j1939_sk_buff_cb. This is because the
memcpy() operation uses the size of skb->cb, leading to a read beyond
the struct j1939_sk_buff_cb.

Updated the memcpy() operation to use the size of struct
j1939_sk_buff_cb instead of the size of skb->cb. This ensures that the
memcpy() operation only reads the memory within the bounds of struct
j1939_sk_buff_cb, preventing out-of-bounds memory access.

Additionally, add a BUILD_BUG_ON() to check that the size of skb->cb
is greater than or equal to the size of struct j1939_sk_buff_cb. This
ensures that the skb->cb buffer is large enough to hold the
j1939_sk_buff_cb structure.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Reported-by: Shuangpeng Bai <sjb7183@psu.edu>
Tested-by: Shuangpeng Bai <sjb7183@psu.edu>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://groups.google.com/g/syzkaller/c/G_LL-C3plRs/m/-8xCi6dCAgAJ
Link: https://lore.kernel.org/all/20230404073128.3173900-1-o.rempel@pengutronix.de
Cc: stable@vger.kernel.org
[mkl: rephrase commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Non-GSO TCP packets whose SKBs' linear portion did not include the
entire TCP header were not populating the first Tx descriptor with
as many bytes as the vNIC expected. This change ensures that all
TCP packets populate the first descriptor with the correct number of
bytes.

Fixes: 893ce44d ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: Shailend Chand <shailend@google.com>
Link: https://lore.kernel.org/r/20230403172809.2939306-1-shailend@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported a data-race in data-race in netlink_recvmsg() [1]

Indeed, netlink_recvmsg() can be run concurrently,
and netlink_dump() also needs protection.

[1]
BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg

read to 0xffff888141840b38 of 8 bytes by task 23057 on cpu 0:
netlink_recvmsg+0xea/0x730 net/netlink/af_netlink.c:1988
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg net/socket.c:1038 [inline]
__sys_recvfrom+0x1ee/0x2e0 net/socket.c:2194
__do_sys_recvfrom net/socket.c:2212 [inline]
__se_sys_recvfrom net/socket.c:2208 [inline]
__x64_sys_recvfrom+0x78/0x90 net/socket.c:2208
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

write to 0xffff888141840b38 of 8 bytes by task 23037 on cpu 1:
netlink_recvmsg+0x114/0x730 net/netlink/af_netlink.c:1989
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg net/socket.c:1038 [inline]
____sys_recvmsg+0x156/0x310 net/socket.c:2720
___sys_recvmsg net/socket.c:2762 [inline]
do_recvmmsg+0x2e5/0x710 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x0000000000000000 -> 0x0000000000001000

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23037 Comm: syz-executor.2 Not tainted 6.3.0-rc4-syzkaller-00195-g5a57b48f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023

Fixes: 9063e21f ("netlink: autosize skb lengthes")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230403214643.768555-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If the number of lanes was forced and then subsequently the user
omits this parameter, the ksettings->lanes is reset. The driver
should then reset the number of lanes to the device's default
for the specified speed.

However, although the ksettings->lanes is set to 0, the mod variable
is not set to true to indicate the driver and userspace should be
notified of the changes.

The consequence is that the same ethtool operation will produce
different results based on the initial state.

If the initial state is:
$ ethtool swp1 | grep -A 3 'Speed: '
        Speed: 500000Mb/s
        Lanes: 2
        Duplex: Full
        Auto-negotiation: on

then executing 'ethtool -s swp1 speed 50000 autoneg off' will yield:
$ ethtool swp1 | grep -A 3 'Speed: '
        Speed: 500000Mb/s
        Lanes: 2
        Duplex: Full
        Auto-negotiation: off

While if the initial state is:
$ ethtool swp1 | grep -A 3 'Speed: '
        Speed: 500000Mb/s
        Lanes: 1
        Duplex: Full
        Auto-negotiation: off

executing the same 'ethtool -s swp1 speed 50000 autoneg off' results in:
$ ethtool swp1 | grep -A 3 'Speed: '
        Speed: 500000Mb/s
        Lanes: 1
        Duplex: Full
        Auto-negotiation: off

This patch fixes this behavior. Omitting lanes will always results in
the driver choosing the default lane width for the chosen speed. In this
scenario, regardless of the initial state, the end state will be, e.g.,

$ ethtool swp1 | grep -A 3 'Speed: '
        Speed: 500000Mb/s
        Lanes: 2
        Duplex: Full
        Auto-negotiation: off

Fixes: 012ce4dd ("ethtool: Extend link modes settings uAPI with lanes")
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/ac238d6b-8726-8156-3810-6471291dbc7f@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kuniyuki Iwashima says:

====================
raw/ping: Fix locking in /proc/net/{raw,icmp}.

The first patch fixes a NULL deref for /proc/net/raw and second one fixes
the same issue for ping sockets.

The first patch also converts hlist_nulls to hlist, but this is because
the current code uses sk_nulls_for_each() for lockless readers, instead
of sk_nulls_for_each_rcu() which adds memory barrier, but raw sockets
does not use the nulls marker nor SLAB_TYPESAFE_BY_RCU in the first place.

OTOH, the ping sockets already uses sk_nulls_for_each_rcu(), and such
conversion can be posted later for net-next.
====================

Link: https://lore.kernel.org/r/20230403194959.48928-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After commit dbca1596 ("ping: convert to RCU lookups, get rid
of rwlock"), we use RCU for ping sockets, but we should use spinlock
for /proc/net/icmp to avoid a potential NULL deref mentioned in
the previous patch.

Let's go back to using spinlock there.

Note we can convert ping sockets to use hlist instead of hlist_nulls
because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets.

Fixes: dbca1596 ("ping: convert to RCU lookups, get rid of rwlock")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Dae R. Jeong reported a NULL deref in raw_get_next() [0].

It seems that the repro was running these sequences in parallel so
that one thread was iterating on a socket that was being freed in
another netns.

  unshare(0x40060200)
  r0 = syz_open_procfs(0x0, &(0x7f0000002080)='net/raw\x00')
  socket$inet_icmp_raw(0x2, 0x3, 0x1)
  pread64(r0, &(0x7f0000000000)=""/10, 0xa, 0x10000000007f)

After commit 0daf07e5 ("raw: convert raw sockets to RCU"), we
use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW
sockets.  However, we should use spinlock for slow paths to avoid
the NULL deref.

Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object
is not reused during iteration in the grace period.  In fact, the
lockless readers do not check the nulls marker with get_nulls_value().
So, SOCK_RAW should use hlist instead of hlist_nulls.

Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(),
let's convert hlist_nulls to hlist and use sk_for_each_rcu() for
fast paths and sk_for_each() and spinlock for /proc/net/raw.

[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 2 PID: 20952 Comm: syz-executor.0 Not tainted 6.2.0-g048ec869bafd-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline]
RIP: 0010:sock_net include/net/sock.h:649 [inline]
RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline]
RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline]
RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995
Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef
RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206
RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000
RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338
RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9
R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78
R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030
FS:  00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb9614b35f CR3: 000000003c672000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 seq_read_iter+0x4c6/0x10f0 fs/seq_file.c:225
 seq_read+0x224/0x320 fs/seq_file.c:162
 pde_read fs/proc/inode.c:316 [inline]
 proc_reg_read+0x23f/0x330 fs/proc/inode.c:328
 vfs_read+0x31e/0xd30 fs/read_write.c:468
 ksys_pread64 fs/read_write.c:665 [inline]
 __do_sys_pread64 fs/read_write.c:675 [inline]
 __se_sys_pread64 fs/read_write.c:672 [inline]
 __x64_sys_pread64+0x1e9/0x280 fs/read_write.c:672
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x478d29
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f843ae8dbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011
RAX: ffffffffffffffda RBX: 0000000000791408 RCX: 0000000000478d29
RDX: 000000000000000a RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000f477909a R08: 0000000000000000 R09: 0000000000000000
R10: 000010000000007f R11: 0000000000000246 R12: 0000000000791740
R13: 0000000000791414 R14: 0000000000791408 R15: 00007ffc2eb48a50
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline]
RIP: 0010:sock_net include/net/sock.h:649 [inline]
RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline]
RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline]
RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995
Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef
RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206
RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000
RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338
RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9
R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78
R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030
FS:  00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f92ff166000 CR3: 000000003c672000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 0daf07e5 ("raw: convert raw sockets to RCU")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Dae R. Jeong <threeearcat@gmail.com>
Link: https://lore.kernel.org/netdev/ZCA2mGV_cmq7lIfV@dragonet/Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

stmmac_reinit_queues() fails to fix up the RX hash.  Even if the number
of channels gets restricted, the output of `ethtool -x' indicates that
all RX queues are used:

  $ ethtool -l enp0s29f2
  Channel parameters for enp0s29f2:
  Pre-set maximums:
  RX:		8
  TX:		8
  Other:		n/a
  Combined:	n/a
  Current hardware settings:
  RX:		8
  TX:		8
  Other:		n/a
  Combined:	n/a
  $ ethtool -x enp0s29f2
  RX flow hash indirection table for enp0s29f2 with 8 RX ring(s):
      0:      0     1     2     3     4     5     6     7
      8:      0     1     2     3     4     5     6     7
  [...]
  $ ethtool -L enp0s29f2 rx 3
  $ ethtool -x enp0s29f2
  RX flow hash indirection table for enp0s29f2 with 3 RX ring(s):
      0:      0     1     2     3     4     5     6     7
      8:      0     1     2     3     4     5     6     7
  [...]

Fix this by setting the indirection table according to the number
of specified queues.  The result is now as expected:

  $ ethtool -L enp0s29f2 rx 3
  $ ethtool -x enp0s29f2
  RX flow hash indirection table for enp0s29f2 with 3 RX ring(s):
      0:      0     1     2     0     1     2     0     1
      8:      2     0     1     2     0     1     2     0
  [...]

Tested on Intel Elkhart Lake.

Fixes: 0366f7e0 ("net: stmmac: add ethtool support for get/set channels")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Link: https://lore.kernel.org/r/20230403121120.489138-1-vinschen@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In the am65_cpsw_nuss_probe() function's cleanup path, the call to
of_platform_device_destroy() for the common->mdio_dev device is invoked
unconditionally. It is possible that either the MDIO node is not present
in the device-tree, or the MDIO node is disabled in the device-tree. In
both these cases, the MDIO device is not created, resulting in a NULL
pointer dereference when the of_platform_device_destroy() function is
invoked on the common->mdio_dev device on the cleanup path.

Fix this by ensuring that the common->mdio_dev device exists, before
attempting to invoke of_platform_device_destroy().

Fixes: a45cfcc6 ("net: ethernet: ti: am65-cpsw-nuss: use of_platform_device_create() for mdio")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230403090321.835877-1-s-vadapalli@ti.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Syzbot reported a bug as following:

=====================================================
BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline]
BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline]
BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline]
BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956
 arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline]
 arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline]
 atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline]
 __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956
 ip6_finish_skb include/net/ipv6.h:1122 [inline]
 ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987
 rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579
 rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922
 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg net/socket.c:734 [inline]
 ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476
 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530
 __sys_sendmsg net/socket.c:2559 [inline]
 __do_sys_sendmsg net/socket.c:2568 [inline]
 __se_sys_sendmsg net/socket.c:2566 [inline]
 __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:766 [inline]
 slab_alloc_node mm/slub.c:3452 [inline]
 __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
 __do_kmalloc_node mm/slab_common.c:967 [inline]
 __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988
 kmalloc_reserve net/core/skbuff.c:492 [inline]
 __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565
 alloc_skb include/linux/skbuff.h:1270 [inline]
 __ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684
 ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854
 rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915
 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg net/socket.c:734 [inline]
 ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476
 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530
 __sys_sendmsg net/socket.c:2559 [inline]
 __do_sys_sendmsg net/socket.c:2568 [inline]
 __se_sys_sendmsg net/socket.c:2566 [inline]
 __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

It is because icmp6hdr does not in skb linear region under the scenario
of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will
trigger the uninit variable access bug.

Use a local variable icmp6_type to carry the correct value in different
scenarios.

Fixes: 14878f75 ("[IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]")
Reported-by: syzbot+8257f4dcef79de670baf@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3d605ec1d0a7f2a269a1a6936ac7f2b85975ee9cSigned-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On the remote side, when QRTR socket is removed, af_qrtr will call
qrtr_port_remove() which broadcasts the DEL_CLIENT packet to all neighbours
including local NS. NS upon receiving the DEL_CLIENT packet, will remove
the lookups associated with the node:port and broadcasts the DEL_SERVER
packet.

But on the host side, due to the arrival of the DEL_CLIENT packet, the NS
would've already deleted the server belonging to that port. So when the
remote's NS again broadcasts the DEL_SERVER for that port, it throws below
error message on the host:

"failed while handling packet from 2:-2"

So fix this error by not broadcasting the DEL_SERVER packet when the
DEL_CLIENT packet gets processed."

Fixes: 0c2204a4 ("net: qrtr: Migrate nameservice to kernel from userspace")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ram Kumar Dharuman <quic_ramd@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
    Transceiver type                          : Ethernet: 1000BASE-LX
    ...
    BR, Nominal                               : 2600MBd

Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.

https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60Reported-by: chowtom <chowtom@gmail.com>
Tested-by: chowtom <chowtom@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a corner case where the asoc out stream count may change
after wait_for_sndbuf.

When the main thread in the client starts a connection, if its out stream
count is set to N while the in stream count in the server is set to N - 2,
another thread in the client keeps sending the msgs with stream number
N - 1, and waits for sndbuf before processing INIT_ACK.

However, after processing INIT_ACK, the out stream count in the client is
shrunk to N - 2, the same to the in stream count in the server. The crash
occurs when the thread waiting for sndbuf is awake and sends the msg in a
non-existing stream(N - 1), the call trace is as below:

  KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
  Call Trace:
   <TASK>
   sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline]
   sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline]
   sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline]
   sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170
   sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163
   sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868
   sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026
   inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825
   sock_sendmsg_nosec net/socket.c:722 [inline]
   sock_sendmsg+0xde/0x190 net/socket.c:745

The fix is to add an unlikely check for the send stream number after the
thread wakes up from the wait_for_sndbuf.

Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations")
Reported-by: syzbot+47c24ca20a2fa01f082e@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on further tests, it seems that the QDMA shaper is not able to
perform shaping close to the MAC link rate without throughput loss.
This cannot be compensated by increasing the shaping rate, so it seems
to be an internal limit.

Fix the remaining throughput regression by detecting that condition and
limiting shaping to ports with lower link speed.

This patch intentionally ignores link speed gain from TRGMII, because
even on such links, shaping to 1000 Mbit/s incurs some throughput
degradation.

Fixes: f63959c7 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

The force watchdog event bit is not cleared during SW reset in the
mv88e6393x switch. This is a different behavior compared to mv886390 which
clears the force WD event bit as advertised. This causes a force WD event
to be handled over and over again as the SW reset following the event never
clears the force WD event bit.

Explicitly clear the watchdog event register to 0 in irq_action when
handling an event to prevent the switch from sending continuous interrupts.
Marvell aren't aware of any other stuck bits apart from the force WD
bit.

Fixes: de776d0d ("net: dsa: mv88e6xxx: add support for mv88e6393x family"
Signed-off-by: Gustav Ekelund <gustaek@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 0db3dc73 ("[NETPOLL]: tx lock deadlock fix") narrowed
down the region under netif_tx_trylock() inside netpoll_send_skb().
(At that point in time netif_tx_trylock() would lock all queues of
the device.) Taking the tx lock was problematic because driver's
cleanup method may take the same lock. So the change made us hold
the xmit lock only around xmit, and expected the driver to take
care of locking within ->ndo_poll_controller().

Unfortunately this only works if netpoll isn't itself called with
the xmit lock already held. Netpoll code is careful and uses
trylock(). The drivers, however, may be using plain lock().
Printing while holding the xmit lock is going to result in rare
deadlocks.

Luckily we record the xmit lock owners, so we can scan all the queues,
the same way we scan NAPI owners. If any of the xmit locks is held
by the local CPU we better not attempt any polling.

It would be nice if we could narrow down the check to only the NAPIs
and the queue we're trying to use. I don't see a way to do that now.
Reported-by: Roman Gushchin <roman.gushchin@linux.dev>
Fixes: 0db3dc73 ("[NETPOLL]: tx lock deadlock fix")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot was able to trigger a panic [1] in icmp_glue_bits(), or
more exactly in skb_copy_and_csum_bits()

There is no repro yet, but I think the issue is that syzbot
manages to lower device mtu to a small value, fooling __icmp_send()

__icmp_send() must make sure there is enough room for the
packet to include at least the headers.

We might in the future refactor skb_copy_and_csum_bits() and its
callers to no longer crash when something bad happens.

[1]
kernel BUG at net/core/skbuff.c:3343 !
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 15766 Comm: syz-executor.0 Not tainted 6.3.0-rc4-syzkaller-00039-gffe78bbd #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:skb_copy_and_csum_bits+0x798/0x860 net/core/skbuff.c:3343
Code: f0 c1 c8 08 41 89 c6 e9 73 ff ff ff e8 61 48 d4 f9 e9 41 fd ff ff 48 8b 7c 24 48 e8 52 48 d4 f9 e9 c3 fc ff ff e8 c8 27 84 f9 <0f> 0b 48 89 44 24 28 e8 3c 48 d4 f9 48 8b 44 24 28 e9 9d fb ff ff
RSP: 0018:ffffc90000007620 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000001e8 RCX: 0000000000000100
RDX: ffff8880276f6280 RSI: ffffffff87fdd138 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 00000000000001e8 R11: 0000000000000001 R12: 000000000000003c
R13: 0000000000000000 R14: ffff888028244868 R15: 0000000000000b0e
FS: 00007fbc81f1c700(0000) GS:ffff88802ca00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2df43000 CR3: 00000000744db000 CR4: 0000000000150ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
icmp_glue_bits+0x7b/0x210 net/ipv4/icmp.c:353
__ip_append_data+0x1d1b/0x39f0 net/ipv4/ip_output.c:1161
ip_append_data net/ipv4/ip_output.c:1343 [inline]
ip_append_data+0x115/0x1a0 net/ipv4/ip_output.c:1322
icmp_push_reply+0xa8/0x440 net/ipv4/icmp.c:370
__icmp_send+0xb80/0x1430 net/ipv4/icmp.c:765
ipv4_send_dest_unreach net/ipv4/route.c:1239 [inline]
ipv4_link_failure+0x5a9/0x9e0 net/ipv4/route.c:1246
dst_link_failure include/net/dst.h:423 [inline]
arp_error_report+0xcb/0x1c0 net/ipv4/arp.c:296
neigh_invalidate+0x20d/0x560 net/core/neighbour.c:1079
neigh_timer_handler+0xc77/0xff0 net/core/neighbour.c:1166
call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700
expire_timers+0x29b/0x4b0 kernel/time/timer.c:1751
__run_timers kernel/time/timer.c:2022 [inline]

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+d373d60fddbdc915e666@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230330174502.1915328-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit c5b959ee.

Reverted change is required after commit 3948b059 ("net: introduce
a config option to tweak MAX_SKB_FRAGS") which does not exist
in this tree, yet. It's only present in -next trees at the time
of writing.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/20230331214444.GA1426512@dev-arch.thelio-3990X/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This adds conversion of VMCI specific error code to general -ENOMEM. It
is needed, because af_vsock.c passes error value returned from transport
to the user, which does not expect to get VMCI_ERROR_* values.

Fixes: c43170b7 ("vsock: return errors other than -ENOMEM to socket")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When playing with various compilers or their versions, some choke on
the t7xx code. For example (with gcc 13):
 In file included from ./arch/s390/include/generated/asm/rwonce.h:1,
                  from ../include/linux/compiler.h:247,
                  from ../include/linux/build_bug.h:5,
                  from ../include/linux/bits.h:22,
                  from ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:17:
 In function 'preempt_count',
     inlined from 't7xx_fsm_append_event' at ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:439:43:
 ../include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'const volatile int[0]' [-Werror=array-bounds=]

There is no reason for any code in the kernel to be built with -Werror
by default. Note that we have generic CONFIG_WERROR. So if anyone wants
-Werror, they can enable that.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20230330232717.1f8bf5ea@kernel.org/
Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: Chiranjeevi Rapolu <chiranjeevi.rapolu@linux.intel.com>
Cc: Liu Haijun <haijun.liu@mediatek.com>
Cc: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

The type of MAX_SKB_FRAGS has changed recently, so the debug printk
needs to be updated:

drivers/net/ethernet/ti/netcp_core.c: In function 'netcp_create_interface':
drivers/net/ethernet/ti/netcp_core.c:2084:30: error: format '%ld' expects argument of type 'long int', but argument 3 has type 'int' [-Werror=format=]
 2084 |                 dev_err(dev, "tx-pool size too small, must be at least %ld\n",
      |                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 3948b059 ("net: introduce a config option to tweak MAX_SKB_FRAGS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 65b32f80 ("uapi: move IPPROTO_L2TP to in.h") moved the
definition of IPPROTO_L2TP from a define to an enum, but since
__stringify doesn't work properly with enums, we ended up breaking the
modalias strings for the l2tp modules:

 $ modinfo l2tp_ip l2tp_ip6 | grep alias
 alias:          net-pf-2-proto-IPPROTO_L2TP
 alias:          net-pf-2-proto-2-type-IPPROTO_L2TP
 alias:          net-pf-10-proto-IPPROTO_L2TP
 alias:          net-pf-10-proto-2-type-IPPROTO_L2TP

Use the resolved number directly in MODULE_ALIAS_*() macros (as we
already do with SOCK_DGRAM) to fix the alias strings:

$ modinfo l2tp_ip l2tp_ip6 | grep alias
alias:          net-pf-2-proto-115
alias:          net-pf-2-proto-115-type-2
alias:          net-pf-10-proto-115
alias:          net-pf-10-proto-115-type-2

Moreover, fix the ordering of the parameters passed to
MODULE_ALIAS_NET_PF_PROTO_TYPE() by switching proto and type.

Fixes: 65b32f80 ("uapi: move IPPROTO_L2TP to in.h")
Link: https://lore.kernel.org/lkml/ZCQt7hmodtUaBlCP@righiandr-XPS-13-7390Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Sit Wei Hong says:

====================
Fix PHY handle no longer parsing

After the fixed link support was introduced, it is observed that PHY
no longer attach to the MAC properly. So we introduce a helper
function to determine if the MAC should expect to connect to a PHY
and proceed accordingly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, intel_speed_mode_2500() will fix-up xpcs_an_inband
to 1 if the underlying controller has a max speed of 1000Mbps.
The value has been initialized and modified if it is
a fixed-linked setup earlier.

This patch removes the fix-up to allow for fixed-linked setup
support. In stmmac_phy_setup(), ovr_an_inband is set based on
the value of xpcs_an_inband. Which in turn will return an
error in phylink_parse_mode() where MLO_AN_FIXED and
ovr_an_inband are both set.

Fixes: c8238631 ("stmmac: intel: prepare to support 1000BASE-X phy interface setting")
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the introduction of the fixed-link support, the MAC driver
no longer attempt to scan for a PHY to attach to. This causes the
non fixed-link setups to stop working.

Using the phylink_expects_phy() to check and determine if the MAC
should expect and attach a PHY.

Fixes: ab21cf92 ("net: stmmac: make mdio register skips PHY scanning for fixed-link")
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Lai Peter Jun Ann <peter.jun.ann.lai@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Provide phylink_expects_phy() to allow MAC drivers to check if it
is expecting a PHY to attach to. Since fixed-linked setups do not
need to attach to a PHY.

Provides a boolean value as to if the MAC should expect a PHY.
Returns true if a PHY is expected.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzbot reported a bug as following:

refcount_t: addition on 0; use-after-free.
...
RIP: 0010:refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25
...
Call Trace:
 <TASK>
 __refcount_add include/linux/refcount.h:199 [inline]
 __refcount_inc include/linux/refcount.h:250 [inline]
 refcount_inc include/linux/refcount.h:267 [inline]
 kref_get include/linux/kref.h:45 [inline]
 qrtr_node_acquire net/qrtr/af_qrtr.c:202 [inline]
 qrtr_node_lookup net/qrtr/af_qrtr.c:398 [inline]
 qrtr_send_resume_tx net/qrtr/af_qrtr.c:1003 [inline]
 qrtr_recvmsg+0x85f/0x990 net/qrtr/af_qrtr.c:1070
 sock_recvmsg_nosec net/socket.c:1017 [inline]
 sock_recvmsg+0xe2/0x160 net/socket.c:1038
 qrtr_ns_worker+0x170/0x1700 net/qrtr/ns.c:688
 process_one_work+0x991/0x15c0 kernel/workqueue.c:2390
 worker_thread+0x669/0x1090 kernel/workqueue.c:2537

It occurs in the concurrent scenario of qrtr_recvmsg() and
qrtr_endpoint_unregister() as following:

	cpu0					cpu1
qrtr_recvmsg				qrtr_endpoint_unregister
qrtr_send_resume_tx			qrtr_node_release
qrtr_node_lookup			mutex_lock(&qrtr_node_lock)
spin_lock_irqsave(&qrtr_nodes_lock, )	refcount_dec_and_test(&node->ref) [node->ref == 0]
radix_tree_lookup [node != NULL]	__qrtr_node_release
qrtr_node_acquire			spin_lock_irqsave(&qrtr_nodes_lock, )
kref_get(&node->ref) [WARNING]		...
					mutex_unlock(&qrtr_node_lock)

Use qrtr_node_lock to protect qrtr_node_lookup() implementation, this
is actually improving the protection of node reference.

Fixes: 0a7e0d0e ("net: qrtr: Migrate node lookup tree to spinlock")
Reported-by: syzbot+a7492efaa5d61b51db23@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=a7492efaa5d61b51db23Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch sets the skb owner in the recv and send path for virtio.

For the send path, this solves the leak caused when
virtio_transport_purge_skbs() finds skb->sk is always NULL and therefore
never matches it with the current socket. Setting the owner upon
allocation fixes this.

For the recv path, this ensures correctness of accounting and also
correct transfer of ownership in vsock_loopback (when skbs are sent from
one socket and received by another).

Fixes: 71dc9ec9 ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/all/ZCCbATwov4U+GBUv@pop-os.localdomain/Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Johannes Berg says:

====================
Just a few fixes:

 * fix size calculation for EHT element to put into SKBs
 * remove erroneous pre-RCU calls for drivers not using sta_state calls
 * fix mesh forwarding and non-forwarding RX
 * fix mesh flow dissection
 * fix a potential NULL dereference on A-MSDU RX w/o station
 * make two variable non-static that really shouldn't be static

* tag 'wireless-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for non-uploaded sta
  wifi: mac80211: fix flow dissection for forwarded packets
  wifi: mac80211: fix mesh forwarding
  wifi: mac80211: fix receiving mesh packets in forwarding=0 networks
  wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap()
  wifi: mac80211: fix potential null pointer dereference
  wifi: mac80211: drop bogus static keywords in A-MSDU rx
====================

Link: https://lore.kernel.org/r/20230330203313.919164-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from CAN and WPAN.

  Still quite a few bugs from this release. This pull is a bit smaller
  because major subtrees went into the previous one. Or maybe people
  took spring break off?

  Current release - regressions:

   - phy: micrel: correct KSZ9131RNX EEE capabilities and advertisement

  Current release - new code bugs:

   - eth: wangxun: fix vector length of interrupt cause

   - vsock/loopback: consistently protect the packet queue with
     sk_buff_head.lock

   - virtio/vsock: fix header length on skb merging

   - wpan: ca8210: fix unsigned mac_len comparison with zero

  Previous releases - regressions:

   - eth: stmmac: don't reject VLANs when IFF_PROMISC is set

   - eth: smsc911x: avoid PHY being resumed when interface is not up

   - eth: mtk_eth_soc: fix tx throughput regression with direct 1G links

   - eth: bnx2x: use the right build_skb() helper after core rework

   - wwan: iosm: fix 7560 modem crash on use on unsupported channel

  Previous releases - always broken:

   - eth: sfc: don't overwrite offload features at NIC reset

   - eth: r8169: fix RTL8168H and RTL8107E rx crc error

   - can: j1939: prevent deadlock by moving j1939_sk_errqueue()

   - virt: vmxnet3: use GRO callback when UPT is enabled

   - virt: xen: don't do grant copy across page boundary

   - phy: dp83869: fix default value for tx-/rx-internal-delay

   - dsa: ksz8: fix multiple issues with ksz8_fdb_dump

   - eth: mvpp2: fix classification/RSS of VLAN and fragmented packets

   - eth: mtk_eth_soc: fix flow block refcounting logic

  Misc:

   - constify fwnode pointers in SFP handling"

* tag 'net-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
  net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow
  net: ethernet: mtk_eth_soc: fix L2 offloading with DSA untag offload
  net: ethernet: mtk_eth_soc: fix flow block refcounting logic
  net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit()
  net: dsa: sync unicast and multicast addresses for VLAN filters too
  net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only
  xen/netback: use same error messages for same errors
  test/vsock: new skbuff appending test
  virtio/vsock: WARN_ONCE() for invalid state of socket
  virtio/vsock: fix header length on skb merging
  bnxt_en: Add missing 200G link speed reporting
  bnxt_en: Fix typo in PCI id to device description string mapping
  bnxt_en: Fix reporting of test result in ethtool selftest
  i40e: fix registers dump after run ethtool adapter self test
  bnx2x: use the right build_skb() helper
  net: ipa: compute DMA pool size properly
  net: wwan: iosm: fixes 7560 modem crash
  net: ethernet: mtk_eth_soc: fix tx throughput regression with direct 1G links
  ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg()
  ice: add profile conflict check for AVF FDIR
  ...

Merge tag 'for-6.3/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix two DM core bugs in the code that handles splitting "abnormal" IO
   (discards, write same and secure erase) and issuing that IO to the
   correct underlying devices (and offsets within those devices).

* tag 'for-6.3/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix __send_duplicate_bios() to always allow for splitting IO
  dm: fix improper splitting for abnormal bios

Pull drm fixes from Daniel Vetter:
 "Two regression fixes in here, otherwise just the usual stuff:

   - i915 fixes for color mgmt, psr, lmem flush, hibernate oops, and
     more

   - amdgpu: dp mst and hibernate regression fix

   - etnaviv: revert fdinfo support (incl drm/sched revert), leak fix

   - misc ivpu fixes, nouveau backlight, drm buddy allocator 32bit
     fixes"

* tag 'drm-fixes-2023-03-30' of git://anongit.freedesktop.org/drm/drm: (27 commits)
  Revert "drm/scheduler: track GPU active time per entity"
  Revert "drm/etnaviv: export client GPU usage statistics via fdinfo"
  drm/etnaviv: fix reference leak when mmaping imported buffer
  drm/amdgpu: allow more APUs to do mode2 reset when go to S4
  drm/amd/display: Take FEC Overhead into Timeslot Calculation
  drm/amd/display: Add DSC Support for Synaptics Cascaded MST Hub
  drm: test: Fix 32-bit issue in drm_buddy_test
  drm: buddy_allocator: Fix buddy allocator init on 32-bit systems
  drm/nouveau/kms: Fix backlight registration
  drm/i915/perf: Drop wakeref on GuC RC error
  drm/i915/dpt: Treat the DPT BO as a framebuffer
  drm/i915/gem: Flush lmem contents after construction
  drm/i915/tc: Fix the ICL PHY ownership check in TC-cold state
  drm/i915: Disable DC states for all commits
  drm/i915: Workaround ICL CSC_MODE sticky arming
  drm/i915: Add a .color_post_update() hook
  drm/i915: Move CSC load back into .color_commit_arm() when PSR is enabled on skl/glk
  drm/i915: Split icl_color_commit_noarm() from skl_color_commit_noarm()
  drm/i915/pmu: Use functions common with sysfs to read actual freq
  accel/ivpu: Fix IPC buffer header status field value
  ...

Commit 7dd76d1f ("dm: improve bio splitting and associated IO
accounting") only called setup_split_accounting() from
__send_duplicate_bios() if a single bio were being issued. But the case
where duplicate bios are issued must call it too.

Otherwise the bio won't be split and resubmitted (via recursion through
block core back to DM) to submit the later portions of a bio (which may
map to an entirely different target).

For example, when discarding an entire DM striped device with the
following DM table:
 vg-lvol0: 0 159744 striped 2 128 7:0 2048 7:1 2048
 vg-lvol0: 159744 45056 striped 2 128 7:2 2048 7:3 2048

Before (broken, discards the first striped target's devices twice):
 device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872
 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872
 device-mapper: striped: target_stripe=0, bdev=7:0, start=2049 len=22528
 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=22528

After (works as expected):
 device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872
 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872
 device-mapper: striped: target_stripe=0, bdev=7:2, start=2048 len=22528
 device-mapper: striped: target_stripe=1, bdev=7:3, start=2048 len=22528

Fixes: 7dd76d1f ("dm: improve bio splitting and associated IO accounting")
Cc: stable@vger.kernel.org
Reported-by: Orange Kao <orange@aiven.io>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

"Abnormal" bios include discards, write zeroes and secure erase. By no
longer passing the calculated 'len' pointer, commit 7dd06a25 ("dm:
allow dm_accept_partial_bio() for dm_io without duplicate bios") took a
senseless approach to disallowing dm_accept_partial_bio() from working
for duplicate bios processed using __send_duplicate_bios().

It inadvertently and incorrectly stopped the use of 'len' when
initializing a target's io (in alloc_tio). As such the resulting tio
could address more area of a device than it should.

For example, when discarding an entire DM striped device with the
following DM table:
 vg-lvol0: 0 159744 striped 2 128 7:0 2048 7:1 2048
 vg-lvol0: 159744 45056 striped 2 128 7:2 2048 7:3 2048

Before this fix:

 device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=102400
 blkdiscard: attempt to access beyond end of device
 loop0: rw=2051, sector=2048, nr_sectors = 102400 limit=81920

 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=102400
 blkdiscard: attempt to access beyond end of device
 loop1: rw=2051, sector=2048, nr_sectors = 102400 limit=81920

After this fix;

 device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872
 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872

Fixes: 7dd06a25 ("dm: allow dm_accept_partial_bio() for dm_io without duplicate bios")
Cc: stable@vger.kernel.org
Reported-by: Orange Kao <orange@aiven.io>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

The cache needs to be flushed to ensure that the hardware stops offloading
the flow immediately.

Fixes: 33fc42de ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230330120840.52079-3-nbd@nbd.nameSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Check for skb metadata in order to detect the case where the DSA header
is not present.

Fixes: 2d7605a7 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230330120840.52079-2-nbd@nbd.nameSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since we call flow_block_cb_decref on FLOW_BLOCK_UNBIND, we also need to
call flow_block_cb_incref for a newly allocated cb.
Also fix the accidentally inverted refcount check on unbind.

Fixes: 502e84e2 ("net: ethernet: mtk_eth_soc: add flow offloading support")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230330120840.52079-1-nbd@nbd.nameSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Reported on the Turris forum, mvneta provokes kernel warnings in the
architecture DMA mapping code when mvneta_setup_txqs() fails to
allocate memory. This happens because when mvneta_cleanup_txqs() is
called in the mvneta_stop() path, we leave pointers in the structure
that have been freed.

Then on mvneta_open(), we call mvneta_setup_txqs(), which starts
allocating memory. On memory allocation failure, mvneta_cleanup_txqs()
will walk all the queues freeing any non-NULL pointers - which includes
pointers that were previously freed in mvneta_stop().

Fix this by setting these pointers to NULL to prevent double-freeing
of the same memory.

Fixes: 2adb719d ("net: mvneta: Implement software TSO")
Link: https://forum.turris.cz/t/random-kernel-exceptions-on-hbl-tos-7-0/18865/8Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1phUe5-00EieL-7q@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>