- 28 Aug, 2012 6 commits
-
-
Horia Geanta authored
Generate a link table in case assoc data is a scatterlist. While at it, add support for handling non-contiguous assoc data and iv. Signed-off-by:
Horia Geanta <horia.geanta@freescale.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geanta authored
It's more natural to think of these vars as bool rather than int. Signed-off-by:
-
Horia Geanta authored
talitos_edesc_alloc does not need hash_result param. Checking whether dst scatterlist is NULL or not is all that is required. Signed-off-by:
-
Horia Geanta authored
For IPsec encryption, in the case when: -the input buffer is fragmented (edesc->src_nents > 0) -the output buffer is not fragmented (edesc->dst_nents = 0) the ICV is not output in the link table, but after the encrypted payload. Copying the ICV must be avoided in this case; consequently the condition edesc->dma_len > 0 must be more specific, i.e. must depend on the type of the output buffer - fragmented or not. Testing was performed by modifying testmgr to support src != dst, since currently native kernel IPsec does in-place encryption (src == dst). Signed-off-by:
-
Kim Phillips authored
the entry points and geniv definitions for all aead, ablkcipher, and hash algorithms are all common; move them to a single assignment in talitos_alg_alloc(). This assumes it's ok to assign a setkey() on non-hmac algs. Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
Kim Phillips authored
lighten driver_algs[] by moving them to talitos_alg_alloc(). Signed-off-by:
-
- 20 Aug, 2012 4 commits
-
-
Tushar Behera authored
Commit bd3c7b5c ("crypto: atmel - add Atmel AES driver") possibly has a typo error of adding an extra CONFIG_. CC: Nicolas Royer <nicolas@eukrea.com> Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
-
Julia Lawall authored
devm_kfree and devm_iounmap should not have to be explicitly used. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,d; @@ x = devm_kzalloc(...) ... ?-devm_kfree(d,x); // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Michael Ellerman authored
virt_to_abs() is just a wrapper around __pa(), use __pa() directly. We should be including <asm/page.h> to get __pa(). abs_addr.h will be removed shortly so drop that. We were getting of.h via abs_addr.h so we need to include that directly. Having done all that, clean up the ordering of the includes. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by:
-
Jussi Kivilinna authored
crypto: aesni_intel - improve lrw and xts performance by utilizing parallel AES-NI hardware pipelines Use parallel LRW and XTS encryption facilities to better utilize AES-NI hardware pipelines and gain extra performance. Tcrypt benchmark results (async), old vs new ratios: Intel Core i5-2450M CPU (fam: 6, model: 42, step: 7) aes:128bit lrw:256bit xts:256bit size lrw-enc lrw-dec xts-dec xts-dec 16B 0.99x 1.00x 1.22x 1.19x 64B 1.38x 1.50x 1.58x 1.61x 256B 2.04x 2.02x 2.27x 2.29x 1024B 2.56x 2.54x 2.89x 2.92x 8192B 2.85x 2.99x 3.40x 3.23x aes:192bit lrw:320bit xts:384bit size lrw-enc lrw-dec xts-dec xts-dec 16B 1.08x 1.08x 1.16x 1.17x 64B 1.48x 1.54x 1.59x 1.65x 256B 2.18x 2.17x 2.29x 2.28x 1024B 2.67x 2.67x 2.87x 3.05x 8192B 2.93x 2.84x 3.28x 3.33x aes:256bit lrw:348bit xts:512bit size lrw-enc lrw-dec xts-dec xts-dec 16B 1.07x 1.07x 1.18x 1.19x 64B 1.56x 1.56x 1.70x 1.71x 256B 2.22x 2.24x 2.46x 2.46x 1024B 2.76x 2.77x 3.13x 3.05x 8192B 2.99x 3.05x 3.40x 3.30x Cc: Huang Ying <ying.huang@intel.com> Signed-off-by:Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Reviewed-by:
-
- 01 Aug, 2012 30 commits
-
-
Seth Jennings authored
This patch add the 842 cryptographic API driver that submits compression requests to the 842 hardware compression accelerator driver (nx-compress). If the hardware accelerator goes offline for any reason (dynamic disable, migration, etc...), this driver will use LZO as a software failover for all future compression requests. For decompression requests, the 842 hardware driver contains a software implementation of the 842 decompressor to support the decompression of data that was compressed before the accelerator went offline. Signed-off-by:
Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by:
-
Seth Jennings authored
This patch adds the driver for interacting with the 842 compression accelerator on IBM Power7+ systems. The device is a child of the Platform Facilities Option (PFO) and shows up as a child of the IBM VIO bus. The compression/decompression API takes the same arguments as existing compression methods like lzo and deflate. The 842 hardware operates on 4K hardware pages and the driver breaks up input on 4K boundaries to submit it to the hardware accelerator. Signed-off-by:
-
Seth Jennings authored
This patch enables compression engine support in the architecture vector. This causes the Power hypervisor to allow access to the nx comrpession accelerator. Signed-off-by:
-
Seth Jennings authored
This patch creates a new submenu for the NX cryptographic hardware accelerator and breaks the NX options into their own Kconfig file under drivers/crypto/nx/Kconfig. This will permit additional NX functionality to be easily and more cleanly added in the future without touching drivers/crypto/Makefile|Kconfig. Signed-off-by:
-
Kim Phillips authored
SHARE_WAIT, whilst more optimal for association-less crypto, has the ability to start thrashing the CCB descriptor/key caches, given high levels of traffic across multiple security associations (and thus keys). Switch to using the SERIAL sharing type, which prefers the last used CCB for the SA. On a 2-DECO platform such as the P3041, this can improve performance by about 3.7%. Signed-off-by:
-
Shengzhou Liu authored
In some device trees of previous version, there were string "fsl,sec4.0". To be backward compatible with device trees, we first check "fsl,sec-v4.0", if it fails, then check for "fsl,sec4.0". Signed-off-by:
Shengzhou Liu <Shengzhou.Liu@freescale.com> extended to include new hash and rng code, which was omitted from the previous version of this patch during a rebase of the SDK version. Signed-off-by:
-
Kim Phillips authored
commit "crypto: caam - use non-irq versions of spinlocks for job rings" made two bad assumptions: (a) The caam_jr_enqueue lock isn't used in softirq context. Not true: jr_enqueue can be interrupted by an incoming net interrupt and the received packet may be sent for encryption, via caam_jr_enqueue in softirq context, thereby inducing a deadlock. This is evidenced when running netperf over an IPSec tunnel between two P4080's, with spinlock debugging turned on: [ 892.092569] BUG: spinlock lockup on CPU#7, netperf/10634, e8bf5f70 [ 892.098747] Call Trace: [ 892.101197] [eff9fc10] [c00084c0] show_stack+0x48/0x15c (unreliable) [ 892.107563] [eff9fc50] [c0239c2c] do_raw_spin_lock+0x16c/0x174 [ 892.113399] [eff9fc80] [c0596494] _raw_spin_lock+0x3c/0x50 [ 892.118889] [eff9fc90] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.124550] [eff9fcd0] [c044a644] aead_decrypt+0x6c/0xc8 [ 892.129625] BUG: spinlock lockup on CPU#5, swapper/5/0, e8bf5f70 [ 892.129629] Call Trace: [ 892.129637] [effa7c10] [c00084c0] show_stack+0x48/0x15c (unreliable) [ 892.129645] [effa7c50] [c0239c2c] do_raw_spin_lock+0x16c/0x174 [ 892.129652] [effa7c80] [c0596494] _raw_spin_lock+0x3c/0x50 [ 892.129660] [effa7c90] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.129666] [effa7cd0] [c044a644] aead_decrypt+0x6c/0xc8 [ 892.129674] [effa7d00] [c0509724] esp_input+0x178/0x334 [ 892.129681] [effa7d50] [c0519778] xfrm_input+0x77c/0x818 [ 892.129688] [effa7da0] [c050e344] xfrm4_rcv_encap+0x20/0x30 [ 892.129697] [effa7db0] [c04b90c8] ip_local_deliver+0x190/0x408 [ 892.129703] [effa7de0] [c04b966c] ip_rcv+0x32c/0x898 [ 892.129709] [effa7e10] [c048b998] __netif_receive_skb+0x27c/0x4e8 [ 892.129715] [effa7e80] [c048d744] netif_receive_skb+0x4c/0x13c [ 892.129726] [effa7eb0] [c03c28ac] _dpa_rx+0x1a8/0x354 [ 892.129732] [effa7ef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108 [ 892.129742] [effa7f10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4 [ 892.129748] [effa7f40] [c03c153c] dpaa_eth_poll+0x20/0x94 [ 892.129754] [effa7f60] [c048dbd0] net_rx_action+0x13c/0x1f4 [ 892.129763] [effa7fa0] [c003d1b8] __do_softirq+0x108/0x1b0 [ 892.129769] [effa7ff0] [c000df58] call_do_softirq+0x14/0x24 [ 892.129775] [ebacfe70] [c0004868] do_softirq+0xd8/0x104 [ 892.129780] [ebacfe90] [c003d5a4] irq_exit+0xb8/0xd8 [ 892.129786] [ebacfea0] [c0004498] do_IRQ+0xa4/0x1b0 [ 892.129792] [ebacfed0] [c000fad8] ret_from_except+0x0/0x18 [ 892.129798] [ebacff90] [c0009010] cpu_idle+0x94/0xf0 [ 892.129804] [ebacffb0] [c059ff88] start_secondary+0x42c/0x430 [ 892.129809] [ebacfff0] [c0001e28] __secondary_start+0x30/0x84 [ 892.281474] [ 892.282959] [eff9fd00] [c0509724] esp_input+0x178/0x334 [ 892.288186] [eff9fd50] [c0519778] xfrm_input+0x77c/0x818 [ 892.293499] [eff9fda0] [c050e344] xfrm4_rcv_encap+0x20/0x30 [ 892.299074] [eff9fdb0] [c04b90c8] ip_local_deliver+0x190/0x408 [ 892.304907] [eff9fde0] [c04b966c] ip_rcv+0x32c/0x898 [ 892.309872] [eff9fe10] [c048b998] __netif_receive_skb+0x27c/0x4e8 [ 892.315966] [eff9fe80] [c048d744] netif_receive_skb+0x4c/0x13c [ 892.321803] [eff9feb0] [c03c28ac] _dpa_rx+0x1a8/0x354 [ 892.326855] [eff9fef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108 [ 892.333212] [eff9ff10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4 [ 892.338872] [eff9ff40] [c03c153c] dpaa_eth_poll+0x20/0x94 [ 892.344271] [eff9ff60] [c048dbd0] net_rx_action+0x13c/0x1f4 [ 892.349846] [eff9ffa0] [c003d1b8] __do_softirq+0x108/0x1b0 [ 892.355338] [eff9fff0] [c000df58] call_do_softirq+0x14/0x24 [ 892.360910] [e7169950] [c0004868] do_softirq+0xd8/0x104 [ 892.366135] [e7169970] [c003d5a4] irq_exit+0xb8/0xd8 [ 892.371101] [e7169980] [c0004498] do_IRQ+0xa4/0x1b0 [ 892.375979] [e71699b0] [c000fad8] ret_from_except+0x0/0x18 [ 892.381466] [e7169a70] [c0445e74] caam_jr_enqueue+0xf8/0x250 [ 892.387127] [e7169ab0] [c044ad4c] aead_givencrypt+0x6ac/0xa70 [ 892.392873] [e7169b20] [c050a0b8] esp_output+0x2b4/0x570 [ 892.398186] [e7169b80] [c0519b9c] xfrm_output_resume+0x248/0x7c0 [ 892.404194] [e7169bb0] [c050e89c] xfrm4_output_finish+0x18/0x28 [ 892.410113] [e7169bc0] [c050e8f4] xfrm4_output+0x48/0x98 [ 892.415427] [e7169bd0] [c04beac0] ip_local_out+0x48/0x98 [ 892.420740] [e7169be0] [c04bec7c] ip_queue_xmit+0x16c/0x490 [ 892.426314] [e7169c10] [c04d6128] tcp_transmit_skb+0x35c/0x9a4 [ 892.432147] [e7169c70] [c04d6f98] tcp_write_xmit+0x200/0xa04 [ 892.437808] [e7169cc0] [c04c8ccc] tcp_sendmsg+0x994/0xcec [ 892.443213] [e7169d40] [c04eebfc] inet_sendmsg+0xd0/0x164 [ 892.448617] [e7169d70] [c04792f8] sock_sendmsg+0x8c/0xbc [ 892.453931] [e7169e40] [c047aecc] sys_sendto+0xc0/0xfc [ 892.459069] [e7169f10] [c047b934] sys_socketcall+0x110/0x25c [ 892.464729] [e7169f40] [c000f480] ret_from_syscall+0x0/0x3c (b) since the caam_jr_dequeue lock is only used in bh context, then semantically it should use _bh spin_lock types. spin_lock_bh semantics are to disable back-halves, and used when a lock is shared between softirq (bh) context and process and/or h/w IRQ context. Since the lock is only used within softirq context, and this tasklet is atomic, there is no need to do the additional work to disable back halves. This patch adds back-half disabling protection to caam_jr_enqueue spin_locks to fix (a), and drops it from caam_jr_dequeue to fix (b). Signed-off-by:
-
Johannes Goetzfried authored
This patch adds a x86_64/avx assembler implementation of the Cast6 block cipher. The implementation processes eight blocks in parallel (two 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the functions from the generic module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) cast6-avx-x86_64 vs. cast6-generic 128bit key: (lrw:256bit) (xts:256bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 1.00x 1.01x 1.01x 0.99x 0.97x 0.98x 1.01x 0.96x 0.98x 64B 0.98x 0.99x 1.02x 1.01x 0.99x 1.00x 1.01x 0.99x 1.00x 0.99x 256B 1.77x 1.84x 0.99x 1.85x 1.77x 1.77x 1.70x 1.74x 1.69x 1.72x 1024B 1.93x 1.95x 0.99x 1.96x 1.93x 1.93x 1.84x 1.85x 1.89x 1.87x 8192B 1.91x 1.95x 0.99x 1.97x 1.95x 1.91x 1.86x 1.87x 1.93x 1.90x 256bit key: (lrw:384bit) (xts:512bit) size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec lrw-enc lrw-dec xts-enc xts-dec 16B 0.97x 0.99x 1.02x 1.01x 0.98x 0.99x 1.00x 1.00x 0.98x 0.98x 64B 0.98x 0.99x 1.01x 1.00x 1.00x 1.00x 1.01x 1.01x 0.97x 1.00x 256B 1.77x 1.83x 1.00x 1.86x 1.79x 1.78x 1.70x 1.76x 1.71x 1.69x 1024B 1.92x 1.95x 0.99x 1.96x 1.93x 1.93x 1.83x 1.86x 1.89x 1.87x 8192B 1.94x 1.95x 0.99x 1.97x 1.95x 1.95x 1.87x 1.87x 1.93x 1.91x Signed-off-by:
Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de> Signed-off-by:
-
Johannes Goetzfried authored
New ECB, CBC, CTR, LRW and XTS testvectors for cast6. We need larger testvectors to check parallel code paths in the optimized implementation. Tests have also been added to the tcrypt module. Signed-off-by:
-
Johannes Goetzfried authored
Rename cast6 module to cast6_generic to allow autoloading of optimized implementations. Generic functions and s-boxes are exported to be able to use them within optimized implementations. Signed-off-by:
-
Johannes Goetzfried authored
This patch adds a x86_64/avx assembler implementation of the Cast5 block cipher. The implementation processes sixteen blocks in parallel (four 4 block chunk AVX operations). The table-lookups are done in general-purpose registers. For small blocksizes the functions from the generic module are called. A good performance increase is provided for blocksizes greater or equal to 128B. Patch has been tested with tcrypt and automated filesystem tests. Tcrypt benchmark results: Intel Core i5-2500 CPU (fam:6, model:42, step:7) cast5-avx-x86_64 vs. cast5-generic 64bit key: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.99x 0.99x 1.00x 1.00x 1.02x 1.01x 64B 1.00x 1.00x 0.98x 1.00x 1.01x 1.02x 256B 2.03x 2.01x 0.95x 2.11x 2.12x 2.13x 1024B 2.30x 2.24x 0.95x 2.29x 2.35x 2.35x 8192B 2.31x 2.27x 0.95x 2.31x 2.39x 2.39x 128bit key: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 0.99x 0.99x 1.00x 1.00x 1.01x 1.01x 64B 1.00x 1.00x 0.98x 1.01x 1.02x 1.01x 256B 2.17x 2.13x 0.96x 2.19x 2.19x 2.19x 1024B 2.29x 2.32x 0.95x 2.34x 2.37x 2.38x 8192B 2.35x 2.32x 0.95x 2.35x 2.39x 2.39x Signed-off-by:
-
Johannes Goetzfried authored
New ECB, CBC and CTR testvectors for cast5. We need larger testvectors to check parallel code paths in the optimized implementation. Tests have also been added to the tcrypt module. Signed-off-by:
-
Johannes Goetzfried authored
Rename cast5 module to cast5_generic to allow autoloading of optimized implementations. Generic functions and s-boxes are exported to be able to use them within optimized implementations. Signed-off-by:
-
Jussi Kivilinna authored
Initialization of cra_list is currently mixed, most ciphers initialize this field and most shashes do not. Initialization however is not needed at all since cra_list is initialized/overwritten in __crypto_register_alg() with list_add(). Therefore perform cleanup to remove all unneeded initializations of this field in 'arch/s390/crypto/' Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
-
Jussi Kivilinna authored
Initialization of cra_list is currently mixed, most ciphers initialize this field and most shashes do not. Initialization however is not needed at all since cra_list is initialized/overwritten in __crypto_register_alg() with list_add(). Therefore perform cleanup to remove all unneeded initializations of this field in 'crypto/drivers/'. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-geode@lists.infradead.org Cc: Michal Ludvig <michal@logix.cz> Cc: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Cc: Varun Wadekar <vwadekar@nvidia.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by:
Kent Yoder <key@linux.vnet.ibm.com> Acked-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by:
-
Jussi Kivilinna authored
Initialization of cra_list is currently mixed, most ciphers initialize this field and most shashes do not. Initialization however is not needed at all since cra_list is initialized/overwritten in __crypto_register_alg() with list_add(). Therefore perform cleanup to remove all unneeded initializations of this field in 'arch/x86/crypto/'. Signed-off-by:
-
Jussi Kivilinna authored
Initialization of cra_list is currently mixed, most ciphers initialize this field and most shashes do not. Initialization however is not needed at all since cra_list is initialized/overwritten in __crypto_register_alg() with list_add(). Therefore perform cleanup to remove all unneeded initializations of this field in 'crypto/'. Signed-off-by:
-
Jussi Kivilinna authored
Combine all shash algs to be registered and use new crypto_[un]register_shashes functions. This simplifies init/exit code. Signed-off-by:
-
Jussi Kivilinna authored
Combine all shash algs to be registered and use new crypto_[un]register_shashes functions. This simplifies init/exit code. Signed-off-by:
-
Jussi Kivilinna authored
Combine all shash algs to be registered and use new crypto_[un]register_shashes functions. This simplifies init/exit code. Signed-off-by:
-
Jussi Kivilinna authored
Combine all shash algs to be registered and use new crypto_[un]register_shashes functions. This simplifies init/exit code. Signed-off-by:
-
Jussi Kivilinna authored
Add crypto_[un]register_shashes() to allow simplifying init/exit code of shash crypto modules that register multiple algorithms. Signed-off-by:
-
Jussi Kivilinna authored
Combine all crypto_alg to be registered and use new crypto_[un]register_algs functions. This simplifies init/exit code. Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Jussi Kivilinna authored
Combine all crypto_alg to be registered and use new crypto_[un]register_algs functions. This simplifies init/exit code. Signed-off-by:
-
Jussi Kivilinna authored
Combine all crypto_alg to be registered and use new crypto_[un]register_algs functions. This simplifies init/exit code. Signed-off-by:
-
Jussi Kivilinna authored
Combine all crypto_alg to be registered and use new crypto_[un]register_algs functions. This simplifies init/exit code. Signed-off-by:
-
Jussi Kivilinna authored
Combine all crypto_alg to be registered and use new crypto_[un]register_algs functions. This simplifies init/exit code. Signed-off-by:
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull irqdomain changes from Grant Likely: "Round of refactoring and enhancements to irq_domain infrastructure. This series starts the process of simplifying irqdomain. The ultimate goal is to merge LEGACY, LINEAR and TREE mappings into a single system, but had to back off from that after some last minute bugs. Instead it mainly reorganizes the code and ensures that the reverse map gets populated when the irq is mapped instead of the first time it is looked up. Merging of the irq_domain types is deferred to v3.7 In other news, this series adds helpers for creating static mappings on a linear or tree mapping." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: irqdomain: Improve diagnostics when a domain mapping fails irqdomain: eliminate slow-path revmap lookups irqdomain: Fix irq_create_direct_mapping() to test irq_domain type. irqdomain: Eliminate dedicated radix lookup functions irqdomain: Support for static IRQ mapping and association. irqdomain: Always update revmap when setting up a virq irqdomain: Split disassociating code into separate function irq_domain: correct a minor wrong comment for linear revmap irq_domain: Standardise legacy/linear domain selection irqdomain: Make ops->map hook optional irqdomain: Remove unnecessary test for IRQ_DOMAIN_MAP_LEGACY irqdomain: Simple NUMA awareness. devicetree: add helper inline for retrieving a node's full name
-
Linus Torvalds authored
Merge Andrew's second set of patches: - MM - a few random fixes - a couple of RTC leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits) rtc/rtc-88pm80x: remove unneed devm_kfree rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables tmpfs: distribute interleave better across nodes mm: remove redundant initialization mm: warn if pg_data_t isn't initialized with zero mips: zero out pg_data_t when it's allocated memcg: gix memory accounting scalability in shrink_page_list mm/sparse: remove index_init_lock mm/sparse: more checks on mem_section number mm/sparse: optimize sparse_index_alloc memcg: add mem_cgroup_from_css() helper memcg: further prevent OOM with too many dirty pages memcg: prevent OOM with too many dirty pages mm: mmu_notifier: fix freed page still mapped in secondary MMU mm: memcg: only check anon swapin page charges for swap cache mm: memcg: only check swap cache pages for repeated charging mm: memcg: split swapin charge function into private and public part mm: memcg: remove needless !mm fixup to init_mm when charging mm: memcg: remove unneeded shmem charge type ...
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO core from Alex Williamson: "This series includes the VFIO userspace driver interface for the 3.6 kernel merge window. This driver is intended to provide a secure interface for device access using IOMMU protection for applications like assignment of physical devices to virtual machines. Qemu will be the first user of this interface, enabling assignment of PCI devices to Qemu guests. This interface is intended to eventually replace the x86-specific assignment mechanism currently available in KVM. This interface has the advantage of being more secure, by working with IOMMU groups to ensure device isolation and providing it's own filtered resource access mechanism, and also more flexible, in not being x86 or KVM specific (extensions to enable POWER are already working). This driver is originally the work of Tom Lyon, but has since been handed over to me and gone through a complete overhaul thanks to the input from David Gibson, Ben Herrenschmidt, Chris Wright, Joerg Roedel, and others. This driver has been available in linux-next for the last month." Paul Mackerras says: "I would be glad to see it go in since we want to use it with KVM on PowerPC. If possible we'd like the PowerPC bits for it to go in as well." * tag 'vfio-for-v3.6' of git://github.com/awilliam/linux-vfio: vfio: Add PCI device driver vfio: Type1 IOMMU implementation vfio: Add documentation vfio: VFIO core
-
