- 20 Jun, 2017 33 commits
-
-
Takashi Iwai authored
commit 71321eb3 upstream. When a user sets a too small ticks with a fine-grained timer like hrtimer, the kernel tries to fire up the timer irq too frequently. This may lead to the condensed locks, eventually the kernel spinlock lockup with warnings. For avoiding such a situation, we define a lower limit of the resolution, namely 1ms. When the user passes a too small tick value that results in less than that, the kernel returns -EINVAL now. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Willy Tarreau <w@1wt.eu>
-
Takashi Iwai authored
commit 37a7ea4a upstream. snd_seq_pool_done() syncs with closing of all opened threads, but it aborts the wait loop with a timeout, and proceeds to the release resource even if not all threads have been closed. The timeout was 5 seconds, and if you run a crazy stuff, it can exceed easily, and may result in the access of the invalid memory address -- this is what syzkaller detected in a bug report. As a fix, let the code graduate from naiveness, simply remove the loop timeout. BugLink: http://lkml.kernel.org/r/CACT4Y+YdhDV2H5LLzDTJDVF-qiYHUHhtRaW4rbb4gUhTCQB81w@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit 4842e98f upstream. When a sequencer queue is created in snd_seq_queue_alloc(),it adds the new queue element to the public list before referencing it. Thus the queue might be deleted before the call of snd_seq_queue_use(), and it results in the use-after-free error, as spotted by syzkaller. The fix is to reference the queue object at the right time. Reported-by:
-
Takashi Iwai authored
commit 85bcf96c upstream. ASUS ROG Ranger VIII with ALC1150 codec requires the extra GPIO pin to up for the front panel. Just use the existing fixup for setting up the GPIO pins. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189411Signed-off-by:
-
Marc Kleine-Budde authored
commit 7c426313 upstream. The priv->cmd_msg_buffer is allocated in the probe function, but never kfree()ed. This patch converts the kzalloc() to resource-managed kzalloc. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Oliver Hartkopp authored
commit a06393ed upstream. When removing a bcm tx operation either a hrtimer or a tasklet might run. As the hrtimer triggers its associated tasklet and vice versa we need to take care to mutually terminate both handlers. Reported-by:
Michael Josenhans <michael.josenhans@web.de> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
-
Yegor Yefremov authored
commit befa6011 upstream. In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). Also add error checking for clk_prepare_enable(). Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
-
Einar Jón authored
commit c97c52be upstream. The priv->device pointer for c_can_pci is never set, but it is used without a NULL check in c_can_start(). Setting it in c_can_pci_probe() like c_can_plat_probe() prevents c_can_pci.ko from crashing, with and without CONFIG_PM. This might also cause the pm_runtime_*() functions in c_can.c to actually be executed for c_can_pci devices - they are the only other place where priv->device is used, but they all contain a null check. Signed-off-by:
Einar Jón <tolvupostur@gmail.com> Signed-off-by:
-
추지호 authored
commit b67d0dd7 upstream. Fix for bad memory access while disconnecting. netdev is freed before private data free, and dev is accessed after freeing netdev. This makes a slub problem, and it raise kernel oops with slub debugger config. Signed-off-by:
Jiho Chu <jiho.chu@samsung.com> Signed-off-by:
-
Marc Kleine-Budde authored
commit 332b05ca upstream. This patch adds a check to limit the number of can_filters that can be set via setsockopt on CAN_RAW sockets. Otherwise allocations > MAX_ORDER are not prevented resulting in a warning. Reference: https://lkml.org/lkml/2016/12/2/230Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
-
Tariq Saeed authored
commit 3d46a44a upstream. PID: 614 TASK: ffff882a739da580 CPU: 3 COMMAND: "ocfs2dc" #0 [ffff882ecc3759b0] machine_kexec at ffffffff8103b35d #1 [ffff882ecc375a20] crash_kexec at ffffffff810b95b5 #2 [ffff882ecc375af0] oops_end at ffffffff815091d8 #3 [ffff882ecc375b20] die at ffffffff8101868b #4 [ffff882ecc375b50] do_trap at ffffffff81508bb0 #5 [ffff882ecc375ba0] do_invalid_op at ffffffff810165e5 #6 [ffff882ecc375c40] invalid_op at ffffffff815116fb [exception RIP: ocfs2_ci_checkpointed+208] RIP: ffffffffa0a7e940 RSP: ffff882ecc375cf0 RFLAGS: 00010002 RAX: 0000000000000001 RBX: 000000000000654b RCX: ffff8812dc83f1f8 RDX: 00000000000017d9 RSI: ffff8812dc83f1f8 RDI: ffffffffa0b2c318 RBP: ffff882ecc375d20 R8: ffff882ef6ecfa60 R9: ffff88301f272200 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffffffffff R13: ffff8812dc83f4f0 R14: 0000000000000000 R15: ffff8812dc83f1f8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff882ecc375d28] ocfs2_check_meta_downconvert at ffffffffa0a7edbd [ocfs2] #8 [ffff882ecc375d38] ocfs2_unblock_lock at ffffffffa0a84af8 [ocfs2] #9 [ffff882ecc375dc8] ocfs2_process_blocked_lock at ffffffffa0a85285 [ocfs2] assert is tripped because the tran is not checkpointed and the lock level is PR. Some time ago, chmod command had been executed. As result, the following call chain left the inode cluster lock in PR state, latter on causing the assert. system_call_fastpath -> my_chmod -> sys_chmod -> sys_fchmodat -> notify_change -> ocfs2_setattr -> posix_acl_chmod -> ocfs2_iop_set_acl -> ocfs2_set_acl -> ocfs2_acl_set_mode Here is how. 1119 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr) 1120 { 1247 ocfs2_inode_unlock(inode, 1); <<< WRONG thing to do. .. 1258 if (!status && attr->ia_valid & ATTR_MODE) { 1259 status = posix_acl_chmod(inode, inode->i_mode); 519 posix_acl_chmod(struct inode *inode, umode_t mode) 520 { .. 539 ret = inode->i_op->set_acl(inode, acl, ACL_TYPE_ACCESS); 287 int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, ... 288 { 289 return ocfs2_set_acl(NULL, inode, NULL, type, acl, NULL, NULL); 224 int ocfs2_set_acl(handle_t *handle, 225 struct inode *inode, ... 231 { .. 252 ret = ocfs2_acl_set_mode(inode, di_bh, 253 handle, mode); 168 static int ocfs2_acl_set_mode(struct inode *inode, struct buffer_head ... 170 { 183 if (handle == NULL) { >>> BUG: inode lock not held in ex at this point <<< 184 handle = ocfs2_start_trans(OCFS2_SB(inode->i_sb), 185 OCFS2_INODE_UPDATE_CREDITS); ocfs2_setattr.#1247 we unlock and at #1259 call posix_acl_chmod. When we reach ocfs2_acl_set_mode.#181 and do trans, the inode cluster lock is not held in EX mode (it should be). How this could have happended? We are the lock master, were holding lock EX and have released it in ocfs2_setattr.#1247. Note that there are no holders of this lock at this point. Another node needs the lock in PR, and we downconvert from EX to PR. So the inode lock is PR when do the trans in ocfs2_acl_set_mode.#184. The trans stays in core (not flushed to disc). Now another node want the lock in EX, downconvert thread gets kicked (the one that tripped assert abovt), finds an unflushed trans but the lock is not EX (it is PR). If the lock was at EX, it would have flushed the trans ocfs2_ci_checkpointed -> ocfs2_start_checkpoint before downconverting (to NULL) for the request. ocfs2_setattr must not drop inode lock ex in this code path. If it does, takes it again before the trans, say in ocfs2_set_acl, another cluster node can get in between, execute another setattr, overwriting the one in progress on this node, resulting in a mode acl size combo that is a mix of the two. Orabug: 20189959 Signed-off-by:
Tariq Saeed <tariq.x.saeed@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Ren authored
commit e7ee2c08 upstream. The crash happens rather often when we reset some cluster nodes while nodes contend fiercely to do truncate and append. The crash backtrace is below: dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover_grant 1 locks on 971 resources dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover 9 generation 5 done: 4 ms ocfs2: Begin replay journal (node 318952601, slot 2) on device (253,18) ocfs2: End replay journal (node 318952601, slot 2) on device (253,18) ocfs2: Beginning quota recovery on device (253,18) for slot 2 ocfs2: Finishing quota recovery on device (253,18) for slot 2 (truncate,30154,1):ocfs2_truncate_file:470 ERROR: bug expression: le64_to_cpu(fe->i_size) != i_size_read(inode) (truncate,30154,1):ocfs2_truncate_file:470 ERROR: Inode 290321, inode i_size = 732 != di i_size = 937, i_flags = 0x1 ------------[ cut here ]------------ kernel BUG at /usr/src/linux/fs/ocfs2/file.c:470! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2_stack_user(OEN) ocfs2(OEN) ocfs2_nodemanager ocfs2_stackglue(OEN) quota_tree dlm(OEN) configfs fuse sd_mod iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs softdog xfs libcrc32c ppdev parport_pc pcspkr parport joydev virtio_balloon virtio_net i2c_piix4 acpi_cpufreq button processor ext4 crc16 jbd2 mbcache ata_generic cirrus virtio_blk ata_piix drm_kms_helper ahci syscopyarea libahci sysfillrect sysimgblt fb_sys_fops ttm floppy libata drm virtio_pci virtio_ring uhci_hcd virtio ehci_hcd usbcore serio_raw usb_common sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: No, Unsupported modules are loaded CPU: 1 PID: 30154 Comm: truncate Tainted: G OE N 4.4.21-69-default #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20151112_172657-sheep25 04/01/2014 task: ffff88004ff6d240 ti: ffff880074e68000 task.ti: ffff880074e68000 RIP: 0010:[<ffffffffa05c8c30>] [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2] RSP: 0018:ffff880074e6bd50 EFLAGS: 00010282 RAX: 0000000000000074 RBX: 000000000000029e RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffff880074e6bda8 R08: 000000003675dc7a R09: ffffffff82013414 R10: 0000000000034c50 R11: 0000000000000000 R12: ffff88003aab3448 R13: 00000000000002dc R14: 0000000000046e11 R15: 0000000000000020 FS: 00007f839f965700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f839f97e000 CR3: 0000000036723000 CR4: 00000000000006e0 Call Trace: ocfs2_setattr+0x698/0xa90 [ocfs2] notify_change+0x1ae/0x380 do_truncate+0x5e/0x90 do_sys_ftruncate.constprop.11+0x108/0x160 entry_SYSCALL_64_fastpath+0x12/0x6d Code: 24 28 ba d6 01 00 00 48 c7 c6 30 43 62 a0 8b 41 2c 89 44 24 08 48 8b 41 20 48 c7 c1 78 a3 62 a0 48 89 04 24 31 c0 e8 a0 97 f9 ff <0f> 0b 3d 00 fe ff ff 0f 84 ab fd ff ff 83 f8 fc 0f 84 a2 fd ff RIP [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2] It's because ocfs2_inode_lock() get us stale LVB in which the i_size is not equal to the disk i_size. We mistakenly trust the LVB because the underlaying fsdlm dlm_lock() doesn't set lkb_sbflags with DLM_SBF_VALNOTVALID properly for us. But, why? The current code tries to downconvert lock without DLM_LKF_VALBLK flag to tell o2cb don't update RSB's LVB if it's a PR->NULL conversion, even if the lock resource type needs LVB. This is not the right way for fsdlm. The fsdlm plugin behaves different on DLM_LKF_VALBLK, it depends on DLM_LKF_VALBLK to decide if we care about the LVB in the LKB. If DLM_LKF_VALBLK is not set, fsdlm will skip recovering RSB's LVB from this lkb and set the right DLM_SBF_VALNOTVALID appropriately when node failure happens. The following diagram briefly illustrates how this crash happens: RSB1 is inode metadata lock resource with LOCK_TYPE_USES_LVB; The 1st round: Node1 Node2 RSB1: PR RSB1(master): NULL->EX ocfs2_downconvert_lock(PR->NULL, set_lvb==0) ocfs2_dlm_lock(no DLM_LKF_VALBLK) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - dlm_lock(no DLM_LKF_VALBLK) convert_lock(overwrite lkb->lkb_exflags with no DLM_LKF_VALBLK) RSB1: NULL RSB1: EX reset Node2 dlm_recover_rsbs() recover_lvb() /* The LVB is not trustable if the node with EX fails and * no lock >= PR is left. We should set RSB_VALNOTVALID for RSB1. */ if(!(kb_exflags & DLM_LKF_VALBLK)) /* This means we miss the chance to return; * to invalid the LVB here. */ The 2nd round: Node 1 Node2 RSB1(become master from recovery) ocfs2_setattr() ocfs2_inode_lock(NULL->EX) /* dlm_lock() return the stale lvb without setting DLM_SBF_VALNOTVALID */ ocfs2_meta_lvb_is_trustable() return 1 /* so we don't refresh inode from disk */ ocfs2_truncate_file() mlog_bug_on_msg(disk isize != i_size_read(inode)) /* crash! */ The fix is quite straightforward. We keep to set DLM_LKF_VALBLK flag for dlm_lock() if the lock resource type needs LVB and the fsdlm plugin is uesed. Link: http://lkml.kernel.org/r/1481275846-6604-1-git-send-email-zren@suse.comSigned-off-by:
Eric Ren <zren@suse.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Sachin Prabhu authored
commit 62a6cfdd upstream. commit 4fcd1813 ("Fix reconnect to not defer smb3 session reconnect long after socket reconnect") added support for Negotiate requests to be initiated by echo calls. To avoid delays in calling echo after a reconnect, I added the patch introduced by the commit b8c60012 ("Call echo service immediately after socket reconnect"). This has however caused a regression with cifs shares which do not have support for echo calls to trigger Negotiate requests. On connections which need to call Negotiation, the echo calls trigger an error which triggers a reconnect which in turn triggers another echo call. This results in a loop which is only broken when an operation is performed on the cifs share. For an idle share, it can DOS a server. The patch uses the smb_operation can_echo() for cifs so that it is called only if connection has been already been setup. kernel bz: 194531 Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Tested-by:
Jonathan Liu <net147@gmail.com> Acked-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Aurelien Aptel authored
commit a6b5058f upstream. if, when mounting //HOST/share/sub/dir/foo we can query /sub/dir/foo but not any of the path components above: - store the /sub/dir/foo prefix in the cifs super_block info - in the superblock, set root dentry to the subpath dentry (instead of the share root) - set a flag in the superblock to remember it - use prefixpath when building path from a dentry fixes bso#8950 Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Reviewed-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
-
Germano Percossi authored
commit a0918f1c upstream. STATUS_BAD_NETWORK_NAME can be received during node failover, causing the flag to be set and making the reconnect thread always unsuccessful, thereafter. Once the only place where it is set is removed, the remaining bits are rendered moot. Removing it does not prevent "mount" from failing when a non existent share is passed. What happens when the share really ceases to exist while the share is mounted is undefined now as much as it was before. Signed-off-by:
Germano Percossi <germano.percossi@citrix.com> Reviewed-by:
-
Pavel Shilovsky authored
commit e3d240e9 upstream. If maxBuf is not 0 but less than a size of SMB2 lock structure we can end up with a memory corruption. Signed-off-by:
-
Pavel Shilovsky authored
commit 4772c795 upstream. Acked-by:
-
Pavel Shilovsky authored
commit 53e0e11e upstream. We can not unlock/lock cifs_tcp_ses_lock while walking through ses and tcon lists because it can corrupt list iterator pointers and a tcon structure can be released if we don't hold an extra reference. Fix it by moving a reconnect process to a separate delayed work and acquiring a reference to every tcon that needs to be reconnected. Also do not send an echo request on newly established connections. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
colyli@suse.de authored
commit 03a9e24e upstream. Recently I receive a bug report that on Linux v3.0 based kerenl, hot add disk to a md linear device causes kernel crash at linear_congested(). From the crash image analysis, I find in linear_congested(), mddev->raid_disks contains value N, but conf->disks[] only has N-1 pointers available. Then a NULL pointer deference crashes the kernel. There is a race between linear_add() and linear_congested(), RCU stuffs used in these two functions cannot avoid the race. Since Linuv v4.0 RCU code is replaced by introducing mddev_suspend(). After checking the upstream code, it seems linear_congested() is not called in generic_make_request() code patch, so mddev_suspend() cannot provent it from being called. The possible race still exists. Here I explain how the race still exists in current code. For a machine has many CPUs, on one CPU, linear_add() is called to add a hard disk to a md linear device; at the same time on other CPU, linear_congested() is called to detect whether this md linear device is congested before issuing an I/O request onto it. Now I use a possible code execution time sequence to demo how the possible race happens, seq linear_add() linear_congested() 0 conf=mddev->private 1 oldconf=mddev->private 2 mddev->raid_disks++ 3 for (i=0; i<mddev->raid_disks;i++) 4 bdev_get_queue(conf->disks[i].rdev->bdev) 5 mddev->private=newconf In linear_add() mddev->raid_disks is increased in time seq 2, and on another CPU in linear_congested() the for-loop iterates conf->disks[i] by the increased mddev->raid_disks in time seq 3,4. But conf with one more element (which is a pointer to struct dev_info type) to conf->disks[] is not updated yet, accessing its structure member in time seq 4 will cause a NULL pointer deference fault. To fix this race, there are 2 parts of modification in the patch, 1) Add 'int raid_disks' in struct linear_conf, as a copy of mddev->raid_disks. It is initialized in linear_conf(), always being consistent with pointers number of 'struct dev_info disks[]'. When iterating conf->disks[] in linear_congested(), use conf->raid_disks to replace mddev->raid_disks in the for-loop, then NULL pointer deference will not happen again. 2) RCU stuffs are back again, and use kfree_rcu() in linear_add() to free oldconf memory. Because oldconf may be referenced as mddev->private in linear_congested(), kfree_rcu() makes sure that its memory will not be released until no one uses it any more. Also some code comments are added in this patch, to make this modification to be easier understandable. This patch can be applied for kernels since v4.0 after commit: 3be260cc ("md/linear: remove rcu protections in favour of suspend/resume"). But this bug is reported on Linux v3.0 based kernel, for people who maintain kernels before Linux v4.0, they need to do some back back port to this patch. Changelog: - V3: add 'int raid_disks' in struct linear_conf, and use kfree_rcu() to replace rcu_call() in linear_add(). - v2: add RCU stuffs by suggestion from Shaohua and Neil. - v1: initial effort. Signed-off-by:
Coly Li <colyli@suse.de> Cc: Shaohua Li <shli@fb.com> Cc: Neil Brown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Wei Fang authored
commit 816b0acf upstream. If first_bad == this_sector when we get the WriteMostly disk in read_balance(), valid disk will be returned with zero max_sectors. It'll lead to a dead loop in make_request(), and OOM will happen because of endless allocation of struct bio. Since we can't get data from this disk in this case, so continue for another disk. Signed-off-by:
Wei Fang <fangwei1@huawei.com> Signed-off-by:
-
Konstantin Khlebnikov authored
commit e8d7c332 upstream. Current implementation employ 16bit counter of active stripes in lower bits of bio->bi_phys_segments. If request is big enough to overflow this counter bio will be completed and freed too early. Fortunately this not happens in default configuration because several other limits prevent that: stripe_cache_size * nr_disks effectively limits count of active stripes. And small max_sectors_kb at lower disks prevent that during normal read/write operations. Overflow easily happens in discard if it's enabled by module parameter "devices_handle_discard_safely" and stripe_cache_size is set big enough. This patch limits requests size with 256Mb - 8Kb to prevent overflows. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Shaohua Li <shli@kernel.org> Cc: Neil Brown <neilb@suse.com> Signed-off-by:
-
Benjamin Marzinski authored
commit 314c25c5 upstream. In dm_sm_metadata_create() we temporarily change the dm_space_map operations from 'ops' (whose .destroy function deallocates the sm_metadata) to 'bootstrap_ops' (whose .destroy function doesn't). If dm_sm_metadata_create() fails in sm_ll_new_metadata() or sm_ll_extend(), it exits back to dm_tm_create_internal(), which calls dm_sm_destroy() with the intention of freeing the sm_metadata, but it doesn't (because the dm_space_map operations is still set to 'bootstrap_ops'). Fix this by setting the dm_space_map operations back to 'ops' if dm_sm_metadata_create() fails when it is set to 'bootstrap_ops'. [js] no nr_blocks test in 3.12 yet Signed-off-by:
Benjamin Marzinski <bmarzins@redhat.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Ondrej Kozina authored
commit 265e9098 upstream. In crypt_set_key(), if a failure occurs while replacing the old key (e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag set. Otherwise, the crypto layer would have an invalid key that still has DM_CRYPT_KEY_VALID flag set. Signed-off-by:
Ondrej Kozina <okozina@redhat.com> Reviewed-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Dan Williams authored
commit ac34f15e upstream. When tearing down a block device early in its lifetime, userspace may still be performing discovery actions like blkdev_ioctl() to re-read partitions. The nvdimm_revalidate_disk() implementation depends on disk->driverfs_dev to be valid at entry. However, it is set to NULL in del_gendisk() and fatally this is happening *before* the disk device is deleted from userspace view. There's no reason for del_gendisk() to clear ->driverfs_dev. That device is the parent of the disk. It is guaranteed to not be freed until the disk, as a child, drops its ->parent reference. We could also fix this issue locally in nvdimm_revalidate_disk() by using disk_to_dev(disk)->parent, but lets fix it globally since ->driverfs_dev follows the lifetime of the parent. Longer term we should probably just add a @parent parameter to add_disk(), and stop carrying this pointer in the gendisk. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa00340a8>] nvdimm_revalidate_disk+0x18/0x90 [libnvdimm] CPU: 2 PID: 538 Comm: systemd-udevd Tainted: G O 4.4.0-rc5 #2257 [..] Call Trace: [<ffffffff8143e5c7>] rescan_partitions+0x87/0x2c0 [<ffffffff810f37f9>] ? __lock_is_held+0x49/0x70 [<ffffffff81438c62>] __blkdev_reread_part+0x72/0xb0 [<ffffffff81438cc5>] blkdev_reread_part+0x25/0x40 [<ffffffff8143982d>] blkdev_ioctl+0x4fd/0x9c0 [<ffffffff811246c9>] ? current_kernel_time64+0x69/0xd0 [<ffffffff812916dd>] block_ioctl+0x3d/0x50 [<ffffffff81264c38>] do_vfs_ioctl+0x308/0x560 [<ffffffff8115dbd1>] ? __audit_syscall_entry+0xb1/0x100 [<ffffffff810031d6>] ? do_audit_syscall_entry+0x66/0x70 [<ffffffff81264f09>] SyS_ioctl+0x79/0x90 [<ffffffff81902672>] entry_SYSCALL_64_fastpath+0x12/0x76 Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Reported-by:
Robert Hu <robert.hu@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
commit 25cdb645 upstream. The WRITE_SAME commands are not present in the blk_default_cmd_filter write_ok list, and thus are failed with -EPERM when the SG_IO ioctl() is executed without CAP_SYS_RAWIO capability (e.g., unprivileged users). [ sg_io() -> blk_fill_sghdr_rq() > blk_verify_command() -> -EPERM ] The problem can be reproduced with the sg_write_same command # sg_write_same --num 1 --xferlen 512 /dev/sda # # capsh --drop=cap_sys_rawio -- -c \ 'sg_write_same --num 1 --xferlen 512 /dev/sda' Write same: pass through os error: Operation not permitted # For comparison, the WRITE_VERIFY command does not observe this problem, since it is in that list: # capsh --drop=cap_sys_rawio -- -c \ 'sg_write_verify --num 1 --ilen 512 --lba 0 /dev/sda' # So, this patch adds the WRITE_SAME commands to the list, in order for the SG_IO ioctl to finish successfully: # capsh --drop=cap_sys_rawio -- -c \ 'sg_write_same --num 1 --xferlen 512 /dev/sda' # That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices (qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2]), which employs the SG_IO ioctl() and runs as an unprivileged user (libvirt-qemu). In that scenario, when a filesystem (e.g., ext4) performs its zero-out calls, which are translated to write-same calls in the guest kernel, and then into SG_IO ioctls to the host kernel, SCSI I/O errors may be observed in the guest: [...] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [...] sd 0:0:0:0: [sda] tag#0 Sense Key : Aborted Command [current] [...] sd 0:0:0:0: [sda] tag#0 Add. Sense: I/O process terminated [...] sd 0:0:0:0: [sda] tag#0 CDB: Write Same(10) 41 00 01 04 e0 78 00 00 08 00 [...] blk_update_request: I/O error, dev sda, sector 17096824 Links: [1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52 [2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device') Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
Brahadambal Srinivasan <latha@linux.vnet.ibm.com> Reported-by:
Manjunatha H R <manjuhr1@in.ibm.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Omar Sandoval authored
commit 8ba86821 upstream. get_task_ioprio() accesses the task->io_context without holding the task lock and thus can race with exit_io_context(), leading to a use-after-free. The reproducer below hits this within a few seconds on my 4-core QEMU VM: int main(int argc, char **argv) { pid_t pid, child; long nproc, i; /* ioprio_set(IOPRIO_WHO_PROCESS, 0, IOPRIO_PRIO_VALUE(IOPRIO_CLASS_IDLE, 0)); */ syscall(SYS_ioprio_set, 1, 0, 0x6000); nproc = sysconf(_SC_NPROCESSORS_ONLN); for (i = 0; i < nproc; i++) { pid = fork(); assert(pid != -1); if (pid == 0) { for (;;) { pid = fork(); assert(pid != -1); if (pid == 0) { _exit(0); } else { child = wait(NULL); assert(child == pid); } } } pid = fork(); assert(pid != -1); if (pid == 0) { for (;;) { /* ioprio_get(IOPRIO_WHO_PGRP, 0); */ syscall(SYS_ioprio_get, 2, 0); } } } for (;;) { /* ioprio_get(IOPRIO_WHO_PGRP, 0); */ syscall(SYS_ioprio_get, 2, 0); } return 0; } This gets us KASAN dumps like this: [ 35.526914] ================================================================== [ 35.530009] BUG: KASAN: out-of-bounds in get_task_ioprio+0x7b/0x90 at addr ffff880066f34e6c [ 35.530009] Read of size 2 by task ioprio-gpf/363 [ 35.530009] ============================================================================= [ 35.530009] BUG blkdev_ioc (Not tainted): kasan: bad access detected [ 35.530009] ----------------------------------------------------------------------------- [ 35.530009] Disabling lock debugging due to kernel taint [ 35.530009] INFO: Allocated in create_task_io_context+0x2b/0x370 age=0 cpu=0 pid=360 [ 35.530009] ___slab_alloc+0x55d/0x5a0 [ 35.530009] __slab_alloc.isra.20+0x2b/0x40 [ 35.530009] kmem_cache_alloc_node+0x84/0x200 [ 35.530009] create_task_io_context+0x2b/0x370 [ 35.530009] get_task_io_context+0x92/0xb0 [ 35.530009] copy_process.part.8+0x5029/0x5660 [ 35.530009] _do_fork+0x155/0x7e0 [ 35.530009] SyS_clone+0x19/0x20 [ 35.530009] do_syscall_64+0x195/0x3a0 [ 35.530009] return_from_SYSCALL_64+0x0/0x6a [ 35.530009] INFO: Freed in put_io_context+0xe7/0x120 age=0 cpu=0 pid=1060 [ 35.530009] __slab_free+0x27b/0x3d0 [ 35.530009] kmem_cache_free+0x1fb/0x220 [ 35.530009] put_io_context+0xe7/0x120 [ 35.530009] put_io_context_active+0x238/0x380 [ 35.530009] exit_io_context+0x66/0x80 [ 35.530009] do_exit+0x158e/0x2b90 [ 35.530009] do_group_exit+0xe5/0x2b0 [ 35.530009] SyS_exit_group+0x1d/0x20 [ 35.530009] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 35.530009] INFO: Slab 0xffffea00019bcd00 objects=20 used=4 fp=0xffff880066f34ff0 flags=0x1fffe0000004080 [ 35.530009] INFO: Object 0xffff880066f34e58 @offset=3672 fp=0x0000000000000001 [ 35.530009] ================================================================== Fix it by grabbing the task lock while we poke at the io_context. Reported-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Daeho Jeong authored
commit 05ac5aa1 upstream. We've fixed the race condition problem in calculating ext4 checksum value in commit b47820ed ("ext4: avoid modifying checksum fields directly during checksum veficationon"). However, by this change, when calculating the checksum value of inode whose i_extra_size is less than 4, we couldn't calculate the checksum value in a proper way. This problem was found and reported by Nix, Thank you. Reported-by:
Nix <nix@esperi.org.uk> Signed-off-by:
Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by:
Youngjin Gil <youngjin.gil@samsung.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit 4753d8a2 upstream. If the file system requires journal recovery, and the device is read-ony, return EROFS to the mount system call. This allows xfstests generic/050 to pass. Signed-off-by:
-
Theodore Ts'o authored
commit 97abd7d4 upstream. If the journal is aborted, the needs_recovery feature flag should not be removed. Otherwise, it's the journal might not get replayed and this could lead to more data getting lost. Signed-off-by:
-
Jan Kara authored
commit cd648b8a upstream. If filesystem groups are artifically small (using parameter -g to mkfs.ext4), ext4_mb_normalize_request() can result in a request that is larger than a block group. Trim the request size to not confuse allocation code. Reported-by:
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Theodore Ts'o authored
commit 2ba3e6e8 upstream. It is OK for s_first_meta_bg to be equal to the number of block group descriptor blocks. (It rarely happens, but it shouldn't cause any problems.) https://bugzilla.kernel.org/show_bug.cgi?id=194567 Fixes: 3a4b77cdSigned-off-by:
-
Theodore Ts'o authored
commit e112666b upstream. If the journal has been aborted, we shouldn't mark the underlying buffer head as dirty, since that will cause the metadata block to get modified. And if the journal has been aborted, we shouldn't allow this since it will almost certainly lead to a corrupted file system. Signed-off-by:
-
Eryu Guan authored
commit 3a4b77cd upstream. Ralf Spenneberg reported that he hit a kernel crash when mounting a modified ext4 image. And it turns out that kernel crashed when calculating fs overhead (ext4_calculate_overhead()), this is because the image has very large s_first_meta_bg (debug code shows it's 842150400), and ext4 overruns the memory in count_overhead() when setting bitmap buffer, which is PAGE_SIZE. ext4_calculate_overhead(): buf = get_zeroed_page(GFP_NOFS); <=== PAGE_SIZE buffer blks = count_overhead(sb, i, buf); count_overhead(): for (j = ext4_bg_num_gdb(sb, grp); j > 0; j--) { <=== j = 842150400 ext4_set_bit(EXT4_B2C(sbi, s++), buf); <=== buffer overrun count++; } This can be reproduced easily for me by this script: #!/bin/bash rm -f fs.img mkdir -p /mnt/ext4 fallocate -l 16M fs.img mke2fs -t ext4 -O bigalloc,meta_bg,^resize_inode -F fs.img debugfs -w -R "ssv first_meta_bg 842150400" fs.img mount -o loop fs.img /mnt/ext4 Fix it by validating s_first_meta_bg first at mount time, and refusing to mount if its value exceeds the largest possible meta_bg number. [js] use EXT4_HAS_INCOMPAT_FEATURE instead of new ext4_has_feature_meta_bg Reported-by:
Ralf Spenneberg <ralf@os-t.de> Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
- 19 Jun, 2017 5 commits
-
-
Theodore Ts'o authored
commit c48ae41b upstream. The commit "ext4: sanity check the block and cluster size at mount time" should prevent any problems, but in case the superblock is modified while the file system is mounted, add an extra safety check to make sure we won't overrun the allocated buffer. Signed-off-by:
-
Theodore Ts'o authored
commit 5aee0f8a upstream. Fix a large number of problems with how we handle mount options in the superblock. For one, if the string in the superblock is long enough that it is not null terminated, we could run off the end of the string and try to interpret superblocks fields as characters. It's unlikely this will cause a security problem, but it could result in an invalid parse. Also, parse_options is destructive to the string, so in some cases if there is a comma-separated string, it would be modified in the superblock. (Fortunately it only happens on file systems with a 1k block size.) Signed-off-by:
-
Theodore Ts'o authored
commit cd6bb35b upstream. Centralize the checks for inodes_per_block and be more strict to make sure the inodes_per_block_group can't end up being zero. Signed-off-by:
-
Liu Bo authored
commit 2571e739 upstream. So we can read a btree block via readahead or intentional read, and we can end up with a memory leak when something happens as follows, 1) readahead starts to read block A but does not wait for read completion, 2) btree_readpage_end_io_hook finds that block A is corrupted, and it needs to clear all block A's pages' uptodate bit. 3) meanwhile an intentional read kicks in and checks block A's pages' uptodate to decide which page needs to be read. 4) when some pages have the uptodate bit during 3)'s check so 3) doesn't count them for eb->io_pages, but they are later cleared by 2) so we has to readpage on the page, we get the wrong eb->io_pages which results in a memory leak of this block. This fixes the problem by firstly getting all pages's locking and then checking pages' uptodate bit. t1(readahead) t2(readahead endio) t3(the following read) read_extent_buffer_pages end_bio_extent_readpage for pg in eb: for page 0,1,2 in eb: if pg is uptodate: btree_readpage_end_io_hook(pg) num_reads++ if uptodate: eb->io_pages = num_reads SetPageUptodate(pg) _______________ for pg in eb: for page 3 in eb: read_extent_buffer_pages if pg is NOT uptodate: btree_readpage_end_io_hook(pg) for pg in eb: __extent_read_full_page(pg) sanity check reports something wrong if pg is uptodate: clear_extent_buffer_uptodate(eb) num_reads++ for pg in eb: eb->io_pages = num_reads ClearPageUptodate(page) _______________ for pg in eb: if pg is NOT uptodate: __extent_read_full_page(pg) So t3's eb->io_pages is not consistent with the number of pages it's reading, and during endio(), atomic_dec_and_test(&eb->io_pages) will get a negative number so that we're not able to free the eb. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Jeff Mahoney authored
commit 081fafdd upstream. This reverts commit 644d1071, upstream commit 6f896054. The original patch for mainline, 6f896054 (Btrfs: don't delay inode ref updates during log replay) lists 1d52c78a (Btrfs: try not to ENOSPC on log replay) as the only pre-3.18 dependency, but it also depends on 67de1176 (Btrfs: introduce the delayed inode ref deletion for the single link inode), which was introduced in 3.14 and isn't in 3.12.y. The -stable commit added the check to btrfs_delayed_update_inode, which may look similar to btrfs_delayed_delete_inode_ref, but it's only superficial. The tops of both functions handle typical delayed node boilerplate. The upshot is that the patch is harmless since the caller already checks to see if we're doing log recovery, so we're not breaking anything. It should be reverted because it makes it appear as if this issue was fixed for users who did backport 67de1176, when it is not. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
- 15 Jun, 2017 1 commit
-
-
Willy Tarreau authored
-
- 09 Jun, 2017 1 commit
-
-
Andrey Konovalov authored
[ Upstream commit 5edabca9 ] In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet is forcibly freed via __kfree_skb in dccp_rcv_state_process if dccp_v6_conn_request successfully returns. However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb is saved to ireq->pktopts and the ref count for skb is incremented in dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed in dccp_rcv_state_process. Fix by calling consume_skb instead of doing goto discard and therefore calling __kfree_skb. Similar fixes for TCP: fb7e2399 [TCP]: skb is unexpectedly freed. 0aea76d3 tcp: SYN packets are now simply consumed Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
