- 21 Dec, 2011 17 commits
-
-
Daniel Vetter authored
No longer used. Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
v2: Smash compile fix from Tormod Volden <debian.tormod@gmail.com> for CONFIG_FB_SIS on top of this. Signed-off-by: -
Daniel Vetter authored
To make the transition in a piece-wise and bisectable way possible, I've hijacked the ->owner_list from drm_sman. While transitioning, the list_add was done by the driver, while the list_del was still done by the dying sman code. Now that we are in full control of ->owner_list, do the list_del ourselves. v2: Better explain the list_del trickery as suggested by Chris Wilson. Signed-off-by: -
Daniel Vetter authored
No longer used. Signed-off-by: -
Daniel Vetter authored
Signed-off-by: -
Daniel Vetter authored
Massive indirection through a hashtable for a simple key->pointer look-up actually just adds bloat. v2: Drop the misleading comment noted by Chris Wilson. Signed-off-by: -
Daniel Vetter authored
In contrast to kms drivers, sis/via _always_ associated a buffer with a drm fd. So by the time we reach lastclose, all open drm fds are gone and with them their associated objects. So when sis/via call drm_sman_cleanup in their lastclose funcs, that will free 0 objects. The owner tracking now serves no purpose at all, hence rip it ou. We can't kill the corresponding fields in struct drm_memblock_item yet because we hijack these in the new driver private owner tracking. But now that drm_sman.c doesn't touch ->owner_list anymore, we need to kill the list_move hack and properly add the item to the file_priv list. Also leave the list_del(&obj->owner_list) in drm_sman_free for the moment, it will move to the drivers when sman disappears completely. v2: Remove the redundant INIT_LIST_HEAD as noted by Chris Wilson Signed-off-by: -
Daniel Vetter authored
These are now unused. Signed-off-by: -
Daniel Vetter authored
Exactly like the previous patch for sis. Signed-off-by: -
Daniel Vetter authored
By attach a driver private struct to each open drm fd. Because we steal the owner_list from drm_sman until things settle, use list_move instead of list_add. This requires to export a drm_sman function temporarily before drm_sman will die for real completely. Signed-off-by: -
Dave Airlie authored
-next reported a messy merge, so I've merged my upstream pull into my -next tree. Conflicts: drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.infradead.org/users/kmpark/linux-samsung into drm-core-next * 'exynos-drm-next' of git://git.infradead.org/users/kmpark/linux-samsung: drm/exynos: Add plane support with fimd drm/exynos: add runtime pm feature for fimd drm/exynos: updated crtc and encoder dpms framework. drm/exynos: Use struct drm_mode_fb_cmd2 drm/exynos: Fix compile errors
-
Joonyoung Shim authored
The exynos fimd supports 5 window overlays. Only one window overlay of fimd is used by the crtc, so we need plane feature to use the rest window overlays. This creates one ioctl exynos specific - DRM_EXYNOS_PLANE_SET_ZPOS, it is the ioctl to decide for user to assign which window overlay. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com>
-
Joonyoung Shim authored
This adds runtime PM feature for fimd. The runtime PM functions control clocks for fimd and prevent to access the register of fimd for vblank when clock is turned off by suspend of runtime PM. Signed-off-by:
-
Inki Dae authored
With DPMS ON and OFF requests, crtc dpms would be in charge of just only device power such as fimd or hdmi and encoder dpms in charge of device setting(mode setting and register updating) and also lcd panel and digital TV power. Signed-off-by:
-
Joonyoung Shim authored
The exynos drm also should use struct drm_mode_fb_cmd2 by changes of 308e5bcb commit(drm: add an fb creation ioctl that takes a pixel format v5). Signed-off-by:
-
Joonyoung Shim authored
This compile errors occur by changes of e08e96de commit, so exynos drm should apply this changes. CC drivers/gpu/drm/exynos/exynos_drm_drv.o drivers/gpu/drm/exynos/exynos_drm_drv.c:185: warning: braces around scalar initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:185: warning: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:186: error: field name not in record or union initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:186: error: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:186: warning: initialization from incompatible pointer type drivers/gpu/drm/exynos/exynos_drm_drv.c:187: error: field name not in record or union initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:187: error: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:187: warning: excess elements in scalar initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:187: warning: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:188: error: field name not in record or union initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:188: error: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:188: warning: excess elements in scalar initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:188: warning: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:189: error: field name not in record or union initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:189: error: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:189: warning: excess elements in scalar initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:189: warning: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:190: error: field name not in record or union initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:190: error: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:190: warning: excess elements in scalar initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:190: warning: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:191: error: field name not in record or union initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:191: error: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:191: warning: excess elements in scalar initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:191: warning: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:192: error: field name not in record or union initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:192: error: (near initialization for 'exynos_drm_driver.fops') drivers/gpu/drm/exynos/exynos_drm_drv.c:192: warning: excess elements in scalar initializer drivers/gpu/drm/exynos/exynos_drm_drv.c:192: warning: (near initialization for 'exynos_drm_driver.fops') make[4]: *** [drivers/gpu/drm/exynos/exynos_drm_drv.o] Error 1 make[3]: *** [drivers/gpu/drm/exynos] Error 2 make[2]: *** [drivers/gpu/drm] Error 2 make[1]: *** [drivers/gpu] Error 2 make: *** [drivers] Error 2 Signed-off-by:
-
- 20 Dec, 2011 23 commits
-
-
Ville Syrjälä authored
This function returns the number of planes used by a specific pixel format. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Rob Clark <rob.clark@linaro.org> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Rob Clark authored
Call connector->funcs->dpms(DPMS_ON) rather than just setting connector->dpms = DPMS_ON. This ensures that if the connector has something to do to enable the output (rather than just using drm_helper_connector_dpms helper directly), that this happens at bootup. This solves an issue with connectors not getting enabled from fbcon_init() when the driver is loaded. Signed-off-by:
Rob Clark <rob@ti.com> Reviewed-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
-
Dave Airlie authored
If the bpc is set from the connector is 0, we then use it later to adjust in a special case the HDMI pixel clock, however if the bpc is 0, we end up passing a 0 pixel clock into the code. I'm not sure if this is the correct answer or if we should avoid the HDMI clock adjustment for 0 values. This fixes a divide by 0 on my Llano system with a HDMI monitor and hdmi audio enabled. Reviewed-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Dave Airlie authored
* 'drm-radeon-next' of ../drm-radeon-next: drm/radeon: introduce a sub allocator and convert ib pool to it v4 drm/radeon/kms: add support for per-ring fence interrupts drm/radeon/kms: add cayman specific fence_ring_emit drm/radeon/kms: add some new ring params to better handle other ring types drm/radeon: improve radeon_test_syncing function drm/radeon: precompute fence cpu/gpu addr once v3 drm/radeon: move ring debugfs into radeon_ring.c drm/radeon: rename struct radeon_cp to radeon_ring drm/radeon: disable compute rings on cayman for now drm/radeon: add radeon_fence_count_emited function drm/radeon: make some asic pointers per ring drm/radeon: Add radeon_test_syncing function v2 drm/radeon: make cp variable an array drm/radeon: make ring rptr and wptr register offsets variable drm/radeon: make all functions work with multiple rings. drm/radeon/kms: add support for semaphores v3 drm/radeon/kms: add support for multiple fence queues v2 drm/radeon: fix a spelling mistake drm/radeon: no need to check all relocs for duplicates drm/radeon: fix debugfs handling v3
-
Jerome Glisse authored
Somewhat specializaed sub-allocator designed to perform sub-allocation for command buffer not only for current cs ioctl but for future command submission ioctl as well. Patch also convert current ib pool to use the sub allocator. Idea is that ib poll buffer can be share with other command buffer submission not having 64K granularity. v2 Harmonize pool handling and add suspend/resume callback to pin/unpin sa bo (tested on rv280, rv370, r420, rv515, rv610, rv710, redwood, cayman, rs480, rs690, rs880) v3 Simplify allocator v4 Fix radeon_ib_get error path to properly free fence Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Christian König <deathsimple@vodafone.de> Signed-off-by:
-
Alex Deucher authored
cayman is wb only and doesn't have a VC. Signed-off-by:
-
Alex Deucher authored
Some rptr/wptrs fields have different offsets and not all rings are pm4 so add a new nop field. Signed-off-by:
-
Christian König authored
Also test multiple waits on the same semaphore. Signed-off-by:
-
Jerome Glisse authored
Add a start fence driver helper function which will be call once for each ring and will compute cpu/gpu addr for fence depending on wether to use wb buffer or scratch reg. This patch replace initialize fence driver separately which was broken in regard of GPU lockup. The fence list for created, emited, signaled must be initialize once and only from the asic init callback not from the startup call back which is call from the gpu reset. v2: With this in place we no longer need to know the number of rings in fence_driver_init, also writing to the scratch reg before knowing its offset is a bad idea. v3: rebase on top of change to previous patch in the serie Signed-off-by: -
Christian König authored
Those debugfs files aren't r600 specific, so they shouldn't be in r600.c. Move them to radeon_ring.c and also add functionality to dump CP1 & CP2 ring informations. Signed-off-by:
-
Christian König authored
That naming seems to make more sense, since we not only want to run PM4 rings with it. Signed-off-by:
-
Christian König authored
Disable the additional compute rings on cayman until their setup is fully implemented. Signed-off-by:
-
Christian König authored
Split counting of emited fences out of power management into a seperate function. Signed-off-by:
-
Christian König authored
Emitting fences, semaphores and ib works differently on different ring, so its is easier to maintain separate functions for each ring. Signed-off-by:
-
Christian König authored
Tests syncing between all rings by using semaphores and fences. v2: use radeon_testing as a bit flag rather than on/off switch this allow to test for one thing at a time (bo_move or semaphore test). It kind of break the usage if user wheren't using 1 for bo move test but as it's a test feature i believe it's ok. Signed-off-by: -
Christian König authored
Replace cp, cp1 and cp2 members with just an array of radeon_cp structs. Signed-off-by:
-
Christian König authored
Every ring seems to have the concept of read and write pointers. Make the register offset variable so we can use the functions for different types of rings. Signed-off-by:
-
Christian König authored
Give all asic and radeon_ring_* functions a radeon_cp parameter, so they know the ring to work with. Signed-off-by:
-
Christian König authored
They are used to sync between rings, while fences sync between a ring and the cpu. v2 Fix radeon_semaphore_driver_fini when no semaphore were allocated. v3 Initialize list early on to avoid issue in case or early error Signed-off-by:
-
Alex Deucher authored
For supporting multiple CP ring buffers, async DMA engines and UVD. We still need a way to synchronize between engines. v2 initialize unused fence driver ring to avoid issue in suspend/unload Signed-off-by:
-
Christian König authored
Better fix it before this obvious typo spreads even more. Signed-off-by:
-
Christian König authored
Only check the previously checked relocs for duplicates. Also leaving the handle uninitialized isn't such a good idea. Signed-off-by:
-
