This patch initializes the MMU structures for the kernel context. This is
needed before we can configure mappings for the kernel context.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch initializes the MMU S/W structures before the VM S/W
structures, instead of doing that as part of the VM S/W initialization.

This is done because we need to configure some MMU mappings for the kernel
context, before the VM is initialized. The VM initialization can't be
moved earlier because it depends on the size of the DRAM, which is
retrieved from the device CPU. Communication with the device CPU will
require the MMU mappings to be configured and hence the de-coupling.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch changes the order of H/W IP initializations. The MMU needs to
be initialized before the device CPU queues, because the CPU will go
through the ASIC MMU in order to reach the host memory (where the queues
are located).
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch updates the description of some entries in sysfs for the
habanalabs driver.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch changes the print of an error message about mis-configuration
of the debug infrastructure to be rate-limited, to prevent flooding of
kernel log, as these configuration requests can come at a high rate.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch removes two code sections in the common code that contain code
which is only relevant for simulator support (which is not upstreamed).

This removal saves the need to update this code upstream, which is not
needed anyway.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

unsecured registers can be changed by the user, and hence should be
restored to their default values in context switch
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

On context switch we need to ensure that each user is not be affected by
other user, so we need to clear sync objects and monitors in context
switch instead of in restore_phase_topology function.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

Set protection bits for some tpc registers that should to be
secured.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch removes a limitation on the maximum packet size that is read by
the device CPU as that limitation is not needed.

Therefore, the patch also removes an elaborate calculation that is based
on this limitation which is also not needed now. Instead, use a fixed
value for the memory pool size of the packets.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch adds support to the goya memset function to perform memset to
device memory with size larger then 4GB. In this case, we need to use
multiple LIN_DMA packets because a single packet supports up to 4GB.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch improves the error reporting in case of fatal and non-RAZWI
events such that the event name is printed in addition to the IRQ number.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch increases the timeout for PCI ELBI configuration to support low
frequency Palladium images.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch adds a new parameter that is passed to the
add_end_of_cb_packets() asic-specific function.

The parameter is the pointer to the driver's device structure. The
function needs this pointer for future ASICs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch changes two polling functions to macros, in order to make their
API the same as the standard readl_poll_timeout so we would be able to
define the "condition for exit" when calling these macros.

This will simplify the code as it will eliminate the need to check both
for timeout and for the (cond) in the calling function.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

The driver allocates memory for fence object with GFP_ZERO flag, so there
is no need to explicitly write 0 to the allocated object after the
allocation.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

Driver-initiated DMA jobs are synchronized jobs, i.e. the driver polls on
fence object until the job is finished. There is no interrupt from the
device. Therefore, no need to add space for 2 * msg_prot packets to the
end of the CB. Only a single msg_prot is needed (to write the fence).
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch changes the order of checks when initializing the device CPU.
We want first to check if we need to load the F/W, and only if we need to,
then we want to check the status of the CPU boot program.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch removes some dead code that performs checks about variables
with hard-coded values.

The patch also moves the initialization of those variables to a separate
function, that will possibly have different values per ASIC.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch adds the implementation of the HL_DEBUG_OP_SET_MODE opcode in
the DEBUG IOCTL.

It forces the user who wants to debug the device to set the device into
debug mode before he can configure the debug engines. The patch also makes
sure to disable debug mode upon user releasing FD, in case the user forgot
to disable debug mode.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch fixes comments on various structure members and some spelling
errors in log messages.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch removes redundant CPU availability checks in:
goya_test_queues() - will be done in goya_test_cpu_queue().
goya_ring_doorbell() - was done earlier in goya_send_cpu_message().
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

This patch improves the error message that is shown when a new user tries
to open a new FD while there is already an existing user that is working
on the device.

It also improves the error message in case of missing firmware file.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

If an OpenCAPI context is to be used directly by a kernel driver, there
may not be a suitable mm to use.

The patch makes the mm parameter to ocxl_context_attach optional.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20190620041203.12274-1-alastair@au1.ibm.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SBE fifo operations should be allowed while the SBE is in any of the
"IPL" states. Operations should succeed in this state.

Fixes: 9f4a8a2d fsi/sbefifo: Add driver for the SBE FIFO
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/1561575415-3282-1-git-send-email-eajames@linux.ibm.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on the following report from Smatch, fix the potential
NULL pointer dereference check.

The patch 743256e214e8: "coresight: tmc: Clean up device specific
data" from May 22, 2019, leads to the following Smatch complaint:

    drivers/hwtracing/coresight/coresight-tmc-etr.c:625 tmc_etr_free_flat_buf()
    warn: variable dereferenced before check 'flat_buf' (see line 623)

drivers/hwtracing/coresight/coresight-tmc-etr.c
   622		struct etr_flat_buf *flat_buf = etr_buf->private;
   623		struct device *real_dev = flat_buf->dev->parent;
                                          ^^^^^^^^^^
The patch introduces a new NULL check

   624
   625		if (flat_buf && flat_buf->daddr)
                    ^^^^^^^^
but the existing code assumed it can be NULL.

   626			dma_free_coherent(real_dev, flat_buf->size,
   627					  flat_buf->vaddr, flat_buf->daddr);

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190621175205.24551-3-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on the following report from  Smatch tool, make sure we have a
valid drvdata before we dereference it to find the real dev.

The patch 21d26b905c05: "coresight: etm: Clean up device specific
data" from May 22, 2019, leads to the following Smatch complaint:

    ./drivers/hwtracing/coresight/coresight-etm3x.c:460 etm_get_trace_id()
    warn: variable dereferenced before check 'drvdata' (see line 458)

./drivers/hwtracing/coresight/coresight-etm3x.c
   457		int trace_id = -1;
   458		struct device *etm_dev = drvdata->csdev->dev.parent;
                                         ^^^^^^^^^
New dereference

   459
   460		if (!drvdata)
                    ^^^^^^^^
Checked too late.  Delete the check?

   461			goto out;
   462

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190621175205.24551-2-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "drvdata->atclk" clock is optional, but if it gets set to an error
pointer then we're accidentally return an uninitialized variable instead
of success.

Fixes: 78e6427b ("coresight: funnel: Support static funnel")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190620221237.3536-6-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :

 BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544

Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.

Fixes: 2997aa40 ("coresight: etb10: implementing AUX API")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org> # 4.6+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190620221237.3536-5-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :

 BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544
 caller is tmc_alloc_etf_buffer+0x5c/0x60
 CPU: 2 PID: 2544 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb  1 2019
 Call trace:
  dump_backtrace+0x0/0x150
  show_stack+0x14/0x20
  dump_stack+0x9c/0xc4
  debug_smp_processor_id+0x10c/0x110
  tmc_alloc_etf_buffer+0x5c/0x60
  etm_setup_aux+0x1c4/0x230
  rb_alloc_aux+0x1b8/0x2b8
  perf_mmap+0x35c/0x478
  mmap_region+0x34c/0x4f0
  do_mmap+0x2d8/0x418
  vm_mmap_pgoff+0xd0/0xf8
  ksys_mmap_pgoff+0x88/0xf8
  __arm64_sys_mmap+0x28/0x38
  el0_svc_handler+0xd8/0x138
  el0_svc+0x8/0xc

Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.

Fixes: 2e499bbc ("coresight: tmc: implementing TMC-ETF AUX space API")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org> # 4.7+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190620221237.3536-4-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :

 BUG: using smp_processor_id() in preemptible [00000000] code: perf/1743
 caller is tmc_alloc_etr_buffer+0x1bc/0x1f0
 CPU: 1 PID: 1743 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb  1 2019
 Call trace:
  dump_backtrace+0x0/0x150
  show_stack+0x14/0x20
  dump_stack+0x9c/0xc4
  debug_smp_processor_id+0x10c/0x110
  tmc_alloc_etr_buffer+0x1bc/0x1f0
  etm_setup_aux+0x1c4/0x230
  rb_alloc_aux+0x1b8/0x2b8
  perf_mmap+0x35c/0x478
  mmap_region+0x34c/0x4f0
  do_mmap+0x2d8/0x418
  vm_mmap_pgoff+0xd0/0xf8
  ksys_mmap_pgoff+0x88/0xf8
  __arm64_sys_mmap+0x28/0x38
  el0_svc_handler+0xd8/0x138
  el0_svc+0x8/0xc

Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.

Fixes: 22f429f1 ("coresight: etm-perf: Add support for ETR backend")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org> # 4.20+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190620221237.3536-3-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it's not bound to a CPU, we use
the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :

 BUG: using smp_processor_id() in preemptible [00000000] code: perf/1743
 caller is alloc_etr_buf.isra.6+0x80/0xa0
 CPU: 1 PID: 1743 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb  1 2019
  Call trace:
   dump_backtrace+0x0/0x150
   show_stack+0x14/0x20
   dump_stack+0x9c/0xc4
   debug_smp_processor_id+0x10c/0x110
   alloc_etr_buf.isra.6+0x80/0xa0
   tmc_alloc_etr_buffer+0x12c/0x1f0
   etm_setup_aux+0x1c4/0x230
   rb_alloc_aux+0x1b8/0x2b8
   perf_mmap+0x35c/0x478
   mmap_region+0x34c/0x4f0
   do_mmap+0x2d8/0x418
   vm_mmap_pgoff+0xd0/0xf8
   ksys_mmap_pgoff+0x88/0xf8
   __arm64_sys_mmap+0x28/0x38
   el0_svc_handler+0xd8/0x138
   el0_svc+0x8/0xc

Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.

Fixes: 855ab61c ("coresight: tmc-etr: Refactor function tmc_etr_setup_perf_buf()")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190620221237.3536-2-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Those files are also text files. Convert them to ReST and add
to the misc-files index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/b7dc829809673bd8cffe0e7bbe9c9308681c6fe2.1561756511.git.mchehab+samsung@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current driver checks if input bitstream file size is aligned or
not per PR data width (default 32bits). It requires one additional
step for end user when they generate the bitstream file, padding
extra zeros to bitstream file to align its size per PR data width,
but they don't have to as hardware will drop extra padding bytes
automatically.

In order to simplify the user steps, this patch aligns PR buffer
size per PR data width in driver, to allow user to pass unaligned
size bitstream files to driver.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20190628004951.6202-4-mdf@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes copy_to_user() code in partial reconfiguration
ioctl, as it's useless as user never needs to read the data
structure after ioctl.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20190628004951.6202-3-mdf@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

FME_PR_INTFC_ID is used as compat_id for fpga manager and region,
but high 64 bits and low 64 bits of the compat_id are swapped by
mistake. This patch fixes this problem by fixing register address.
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20190628004951.6202-2-mdf@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In multi-window mode, the read iterator is supposed to start from the
window with the oldest data, which is, chronologically, the next window
after the one with the newest data. This, however, fails to take into
account the potentially empty windows, so in short trace sessions it's
possible to have a lot of zeroes read from the character device first.

Fix this by skipping over the empty windows in initialization of the
read iterator.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190627125152.54905-5-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To allow the use of externally allocated SG tables further down the line,
change the code to reference the table via a pointer and make it point to
the locally allocated table by default.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190627125152.54905-4-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the MSU is using scatterlist, we can support multipage blocks.
At the moment, the code assumes that all blocks are page-sized, but in
larger buffers it may make sense to chunk together larger blocks of
memory. One place where one-to-many relationship needs to be handled is
the MSU buffer's mmap path.

Get rid of the implicit assumption that all blocks are page-sized.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190627125152.54905-3-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds Ice Lake NNPI support to the Intel(R) Trace Hub.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190621161930.60785-5-alexander.shishkin@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>