Inode options that are accessible via the xattr interface are stored
with a +1 bias, so that a value of 0 means unset. We weren't handling
this consistently.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We don't have a limit on the number of inodes in a filesystem, so this
is apparently the right way to report that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Normally successfully parsing a target means disk groups should exist,
but we don't want a BUG() or null ptr deref if we end up with an invalid
target.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When devices have different sized buckets this is more correct.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Since the copygc thread is now global and not per device, we're not
freeing up space on any one device in bounded time - and indeed we never
really were, since rebalance wasn't moving data around between devices
with that objective.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Previously, we would start doing btree updates before writing the first
journal entry; if this was after an unclean shutdown, this could cause
those btree updates to not be blacklisted.

Also, move some code to headers for userspace debug tools.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

painful looking typo, fortunately difficult to hit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

There's an inherent race with setting devices RO when they have dirty
btree nodes on them. We already check if a btree node is on an RO device
before we dirty it, so this patch just allows those writes so that we
don't have errors forcing the entire filesystem read only when trying to
remove a device.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

printbufs know how big the buffer is that was allocated, so we can get
rid of the random PAGE_SIZEs all over the place.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

For portability to userspace, we should try to avoid working in kernel
pages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It should be checking for the recently added flag
btree_node_needs_rewrite.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

And assorted other copygc fixes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We were missing a 'goto retry' and continuing on with an error pointer.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Awhile back the mechanism for garbage collecting unused replicas entries
was significantly improved, but some cleanup was missed - this patch
does that now.

This is also prep work for a patch to account for erasure coded parity
blocks separately - we need to consolidate the logic for
checking/marking the various replicas entries from one bkey into a
single function.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This no longer makes any sense, since copygc is now one thread per
filesystem, not per device, with a single write point.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We define our own BLK_STS_REMOVED, so we need our own to_str helper too.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Now that updates to interior nodes are journalled, we shouldn't be
checking topology of interior nodes until we've finished replaying
updates to that node.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a lockdep splat where we're allocating memory with vmalloc in
the compression bounce path, which doesn't always obey GFP_NOFS.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

There is a bug where we cnan end up clearing the data_has field in the
superblock members section, which causes us to skip reading the journal
and thus journal replay fails. This option tells the recovery path to
not trust those fields.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Per device copygc threads don't move data to different devices and they
make fragmentation works - they don't make much sense anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We ideally want the buckets used for the extra initial replicas to be
reused right away.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

In the buffered write path, we have to check for short writes that write
to the full page, where the page wasn't UpToDate; when this happens, the
page is partly garbage, so we have to zero it out and revert that part
of the write.

This check was wrong - we reverted total from copied, but didn't revert
the iov_iter, probably also leading to corrupted writes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This solves internal fragmentation within stripes. We already have
copygc, which evacuates buckets that are partially or mostly empty, but
it's up to the ec code that manages stripes to deal with stripes that
have empty buckets in them.

This patch changes the path for creating new stripes to check if there's
existing stripes with empty buckets - and if so, update them with new
data buckets instead of creating new stripes.

TODO: improve the disk space accounting so that we can only use this
(more expensive path) when we have too much fragmentation in existing
stripes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Prep work for the patch to update existing stripes with new data blocks.
This moves allocating new stripes into ec.c, and also sets up the data
structures so that we can handly only allocating some of the blocks in a
stripe.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is mainly to solve a lock ordering issue, and also simplifies the
code a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Soon we'll be able to modify existing stripes - replacing empty blocks
with new blocks and new p/q blocks. This patch updates the trigger code
to handle pointers changing in an existing stripe; also, it
significantly improves how the stripes heap works, which means we can
get rid of the stripe creation/deletion lock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The trigger for stripe keys is shortly going to need both the old and
the new key passed to the trigger - this patch does that rework.

For now, this just changes the in memory triggers, and this doesn't
change how extent triggers work.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is prep work for reworking the triggers machinery - we have
triggers that need to know both the old and the new key.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a bug where recovery fails when one of the devices is read
only.

Also - consolidate the "must rewrite this node to insert it" behind a
new btree node flag.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Improved error messages are always a good thing
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It appears this was erronious, a different bug was responsible
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>