- 03 Dec, 2020 40 commits
-
-
Sakari Ailus authored
There's no need to allocate the hardware configuration struct separately. Put it in struct ccs_sensor. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Sakari Ailus authored
No need to support platform data; remove support for conveying hardware configuration that way. Signed-off-by:
-
Sakari Ailus authored
The I²C ID table is no longer needed; remove it. Signed-off-by:
-
Sakari Ailus authored
The CCS compliant sensors use device ID "MIPI0200". Use this id for ACPI device matching. Signed-off-by:
-
Sakari Ailus authored
Add device data specific to DT compatible ID to tell SMIA and CCS devices apart already in power-up. Signed-off-by:
-
Sakari Ailus authored
Add "mipi-ccs-1.0" and "mipi-ccs-1.1" compatible strings to the CCS driver. Signed-off-by:
-
Sakari Ailus authored
Move the SPDX tag to the top, placing the copyright notice after that. This aligns the file with existing practices. Signed-off-by:
-
Sakari Ailus authored
As documentation used to be in .txt files before converting to ReST, rename ccs-regs.txt to avoid it being taken as documentation that pre-dates ReST conversion and so target for further conversion to ReST. Signed-off-by:
-
Dan Carpenter authored
The debugfs_create_dir() function never returns NULLs so this code will never be executed. It's not intended that callers will check for debugfs errors in the normal case and it's not necessary in this driver, so we can just delete this code. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Jonathan Corbet authored
It's been a long time since I could credibly claim to be maintaining these drivers; I'm not even sure my hardware works anymore. Mark them orphan. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'saa7146_pgtable_alloc()' GFP_KERNEL can be used because the callers are either .buf_prepare functions or function that already use GFP_KERNEL (hidden in a 'vmalloc_32()' call). When memory is allocated in 'saa7146_init_one()' GFP_KERNEL can be used because it is probe function and no lock is taken in the between. When memory is allocated in 'saa7146_vv_init()' GFP_KERNEL can be used because this function already uses GFP_KERNEL and no lock is taken in the between. When memory is allocated in 'vbi_workaround()' GFP_KERNEL can be used because it is only called from a .open function. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'av7110_attach()' GFP_KERNEL can be used because this flag is already used above in the same function and no lock is taken in the between. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'snd_solo_pcm_open()' (solo6x10-g723.c) GFP_KERNEL can be used because this flag is already used jew a few lines above. When memory is allocated in 'solo_enc_alloc()' (solo6x10-v4l2-enc.c) GFP_KERNEL can be used because this flag is already used jew a few lines above. When memory is allocated in 'solo_enc_v4l2_init()' (solo6x10-v4l2-enc.c) GFP_KERNEL can be used because calls 'solo_enc_alloc()' which already uses this flag. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Ismael Luceno <ismael@iodev.co.uk> Signed-off-by:
-
Tom Rix authored
The macro use will already have a semicolon. [hverkuil: also add () around p in the macro] Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Fabio Estevam authored
When trying to capture video on a imx6dl-based board with an ADV7280, the following timeout error is observed: v4l2-ctl --stream-mmap -d /dev/video2 [ 22.792049] ipu1_csi1: EOF timeout VIDIOC_DQBUF: failed: Input/output error Increase the IMX_MEDIA_EOF_TIMEOUT to avoid such problem. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Andrey Konovalov authored
Implement mbus_code filtering for format enumeration. Without this patch libcamera errors out with: "ERROR V4L2 v4l2_videodevice.cpp:982 /dev/video0[cap]: Media bus code filtering not supported by the device" This is the second version of this change which handles the case of several pixel formats corresponding to one media bus format correctly. Signed-off-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Andrey Konovalov authored
This reverts commit c90f1178. The assumption of "Each entry in formats[] table has unique mbus_code" is valid for the RDI entities, but not for the PIX ones. Reverting this patch and creating a new one which handles the PIX entities correctly results in smaller and more straightforward patch than doing the changes on top of the current version. Signed-off-by:
-
Peilin Ye authored
Fix 4 typos under drivers/media/platform/rockchip/rkisp1/ found by checkpatch, including the RKISP1_CIF_MI_{M,S}P_PINGPONG_ENABLE macro definitions. Signed-off-by:Peilin Ye <yepeilin.cs@gmail.com> Acked-by:
-
Jacopo Mondi authored
The VNCSI_IFMD_CSI_CHSEL_MASK is not used: remove it. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Fabio Estevam authored
Since commit 29d75068 ("media: fsl-viu: allow building it with COMPILE_TEST") there were several attempts to fix build failures on PPC, MICROBLAZE and M68K. However, such errors are still present as reported by kbuild robot. Fix the problem by using the ioread/write32be() accessors, which build fine on all platforms. Reported-by:
kernel test robot <lkp@intel.com> Suggested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Marek Szyprowski authored
This driver always operates on the DMA/IOVA addresses, so calling them physical addresses is misleading, although when no IOMMU is used they equal each other. Fix this by renaming all such entries to 'addr' and adjusting comments. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Niklas Söderlund authored
If the device is powered off (for example during system suspend to ram) the devices loses its configuration, especially the slave i2c mappings and other configuration set at probe time. This renders the device unusable and the only way to recover is to unbind and rebind the device to the driver to run the probe setup again. Add an early resume callback that reinitializes the device and setup the slave i2c address mappings and other probe time configuration. Signed-off-by:
-
Niklas Söderlund authored
It's not enough to set the CSI-2 virtual channel for TXA and TXB during probe: it also needs to be set when the device is reset. Move the virtual channel selection to adv748x_reset() that is called during probe and when the device needs to be reset. Signed-off-by:
-
Niklas Söderlund authored
It's not enough to select the AFE input port during probe: it also needs to be set when the device is reset. Move the port selection to adv748x_reset() that is called during probe and when the device needs to be reset. Signed-off-by:
-
Niklas Söderlund authored
During probe the i2c slave addresses are set two times in a row, once in adv748x_initialise_clients() and once directly after in adv748x_reset(). Remove the call to adv748x_set_slave_addresses() in adv748x_initialise_clients() as it's only called during probe while adv748x_reset() is called during probe and normal operation. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Dan Carpenter authored
The "a->index" value comes from the user via the ioctl. The problem is that the shift can wrap resulting in setting "mxb->cur_audinput" to an invalid value, which later results in an array overflow. Fixes: 66804277 ("[media] mxb: fix audio handling") Signed-off-by:
-
Christian Hewitt authored
The meson vdec driver also supports Amlogic G12/SM1 hardware. Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Baskov Evgeniy authored
If an error happens in jpeg_get_drv_data(), i.e. match fails, jpeg->variant field is NULL, so we cannot access it. Consider device probe failed if jpeg->variant is NULL. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Baskov Evgeniy <baskov@ispras.ru> Acked-by:
Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Acked-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Jernej Skrabec authored
VP8 in Cedrus shares same engine as H264. Note that it seems necessary to call bitstream parsing functions, to parse frame header, otherwise decoded image is garbage. This is contrary to what is driver supposed to do. However, values are not really used, so this might be acceptable. It's possible that bitstream parsing functions set some internal VPU state, which is later necessary for proper decoding. Biggest suspect is "VP8 probs update" trigger. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Reviewed-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Emmanuel Gil Peyrot authored
Use the new defines instead of hardcoding the VP8 lengths. [hverkuil: add commit log] Signed-off-by:
-
Emmanuel Gil Peyrot authored
These values will be used by various drivers implementing the VP8 stateless API. This had been suggested by Ezequiel Garcia for the Cedrus VP8 driver. Signed-off-by:
-
Irui Wang authored
when IPI time out, dump VPU status to get more debug information Signed-off-by:
Irui Wang <irui.wang@mediatek.com> Reviewed-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Irui Wang authored
VPU should be in idle state before system is suspended or it will work abnormally like VPU program counter not in a correct address or VPU reset Signed-off-by:
-
Fabio Estevam authored
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code by removing the unused non-DT support. Signed-off-by:
-
Zhang Xiaoxu authored
If of_graph_get_endpoint_by_regs() return NULL, it will return 0 rather than an errno, because we doesn't initialize the return value. Fixes: 0556f1d5 ("media: tvp5150: add input source selection of_graph support") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Xu Wang authored
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Martin Cerveny authored
V3s video engine runs at lower speed and support video decoder for H.264 and JPEG/MJPEG only. Signed-off-by:
Martin Cerveny <m.cerveny@computer.org> Signed-off-by:
-
Martin Cerveny authored
Allwinner V3s SoC contains video engine. Add compatible for it. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Martin Cerveny authored
All codecs should have capabilities. For example "Allwinner V3s" does not support "MPEG2". Signed-off-by:
-
Daniel Lee Kruse authored
On AMD Family 15h (Models 30h-3fh), I/O Memory Management Unit RiSC engine sometimes stalls, requiring a reset. As result, MythTV and w-scan won't scan channels on the AMD Kaveri APU with the Hauppauge QuadHD TV tuner card. For the solution I added the Input/Output Memory Management Unit's PCI Identity of 0x1423 to the broken_dev_id[] array, which is used by a quirks logic meant to fix similar problems with other AMD chipsets. Signed-off-by:
Daniel Lee Kruse <daniel.lee.kruse@protonmail.com> Signed-off-by:
-
