- 06 Aug, 2024 40 commits
-
-
Austin Zheng authored
[Why and How] SubVP is not supported when hardware rotation is being used Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Signed-off-by:
Austin Zheng <Austin.Zheng@amd.com> Signed-off-by:
Wayne Lin <wayne.lin@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Frank Min authored
Without setting cpv bit and 7th ib dw, non-dcc buffer copy will have random corruption So set the cpv bit and clear the 7th ib dw for copy non-dcc buffers Signed-off-by:
Frank Min <Frank.Min@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Tao Zhou authored
Instead of printing GPU reset failed. v2: add check for reset_context->src. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
-
Tao Zhou authored
Return RMA status without message print. Signed-off-by:
-
Fangzhi Zuo authored
Under autonomous mode, source reads dpcd DP_PCON_HDMI_POST_FRL_STATUS for the frl link status. Without dsc passthrough, it serves as bw bottleneck on the entire link, compared with the dp link from source to the converter where dsc is available. Reviewed-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by:
-
Joshua Ashton authored
As we discussed before[1], soft recovery should be forwarded to userspace, or we can get into a really bad state where apps will keep submitting hanging command buffers cascading us to a hard reset. 1: https://lore.kernel.org/all/bf23d5ed-9a6b-43e7-84ee-8cbfd0d60f18@froggi.es/Signed-off-by:
Joshua Ashton <joshua@froggi.es> Reviewed-by:
Marek Olšák <marek.olsak@amd.com> Signed-off-by:
-
Yang Wang authored
- amdgpu_ras_error_statistic_ue_count() - amdgpu_ras_error_statistic_ce_count() - amdgpu_ras_error_statistic_de_count() The parameter 'err_addr' is no longer used since following patch. Fixes: a7e8467f ("drm/amdgpu: Remove unused code") Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
-
Likun Gao authored
Adding Manual GDB golden setting for gc v12 revision 0 ASIC. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Aurabindo Pillai authored
When programming phantom pipe, since cursor_width is explicity set to 0, this causes calculation logic to trigger overflow for an unsigned int triggering the kernel's UBSAN check as below: [ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34 [ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int' [ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024 [ 40.962856] Call Trace: [ 40.962857] <TASK> [ 40.962860] dump_stack_lvl+0x48/0x70 [ 40.962870] dump_stack+0x10/0x20 [ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 [ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu] [ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu] [ 40.963327] ? srso_alias_return_thunk+0x5/0x7f [ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu] [ 40.963534] ? srso_alias_return_thunk+0x5/0x7f [ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu] [ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.963906] ? srso_alias_return_thunk+0x5/0x7f [ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu] [ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu] [ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu] [ 40.964587] dml21_validate+0x274/0x770 [amdgpu] [ 40.964761] ? srso_alias_return_thunk+0x5/0x7f [ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu] [ 40.964942] dml2_validate+0x504/0x750 [amdgpu] [ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu] [ 40.965291] ? srso_alias_return_thunk+0x5/0x7f [ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu] [ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu] [ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu] [ 40.965845] ? srso_alias_return_thunk+0x5/0x7f [ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu] Fix this by adding a guard for checking cursor width before triggering the size calculation. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Tao Zhou authored
In the convenience of calling it globally. Signed-off-by:
-
Hansen Dsouza authored
[why & how] Add new stream and char control functions based on DCCG spec Reviewed-by:
Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by:
Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by:
-
Michael Strauss authored
[WHY] Overlay works similarly to MPO, but uses global alpha on both planes and sets the desktop as the rear plane instead of the front plane [HOW] Ensure that top plane isn't overlay by checking global alpha before applying the previously added MPO fix Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Signed-off-by:
-
Arunpravin Paneer Selvam authored
- Add a new start parameter in trim function to specify exact address from where to start the trimming. This would help us in situations like if drivers would like to do address alignment for specific requirements. - Add a new flag DRM_BUDDY_TRIM_DISABLE. Drivers can use this flag to disable the allocator trimming part. This patch enables the drivers control trimming and they can do it themselves based on the application requirements. v1:(Matthew) - check new_start alignment with min chunk_size - use range_overflows() Signed-off-by:
Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by:
-
Rodrigo Siqueira authored
Add a callback that program the DET segment when initializing pipes. Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
[Why & How] Identify few unused fileds in dc_caps. Remove them. Acked-by:
-
Rodrigo Siqueira authored
Drop coasting_vtotal_high and pad from dmub_cmd_update_dirty_rect_data, since it is not used. Acked-by:
-
Rodrigo Siqueira authored
Remove __cplusplus defines added by accident. Acked-by:
-
Rodrigo Siqueira authored
Remove some useless lines from DC Makefiles. Acked-by:
-
Rodrigo Siqueira authored
Include display_mode_vba_314 and display_rq_dlg_calc_314 to the dml Makefile. Acked-by:
-
Sunil Khatri authored
Adding NOP packets one by one in the ring does not use the CP efficiently. Solution: Use CP optimization while adding NOP packet's so PFP can discard NOP packets based on information of count from the Header instead of fetching all NOP packets one by one. Reviewed-by:
Sunil Khatri <sunil.khatri@amd.com> Signed-off-by:
-
Christian König authored
Instead of a TTM reference grab a GEM reference whenever necessary. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Sunil Khatri authored
Adding NOP packets one by one in the ring does not use the CP efficiently. Solution: Use CP optimization while adding NOP packet's so PFP can discard NOP packets based on information of count from the Header instead of fetching all NOP packets one by one. Reviewed-by:
-
Tvrtko Ursulin authored
For some value of optimisation we can replace the division with an bitwise and. And it even shrinks the code. Before: 6c9: 53 push %rbx 6ca: 4c 8b 47 08 mov 0x8(%rdi),%r8 6ce: 31 d2 xor %edx,%edx 6d0: 48 89 fb mov %rdi,%rbx 6d3: 8b 87 c8 05 00 00 mov 0x5c8(%rdi),%eax 6d9: 41 8b 48 04 mov 0x4(%r8),%ecx 6dd: f7 d0 not %eax 6df: 21 c8 and %ecx,%eax 6e1: 83 c1 01 add $0x1,%ecx 6e4: 83 c0 01 add $0x1,%eax 6e7: f7 f1 div %ecx 6e9: 89 d6 mov %edx,%esi 6eb: 41 ff 90 88 00 00 00 call *0x88(%r8) After: 6c9: 53 push %rbx 6ca: 48 8b 57 08 mov 0x8(%rdi),%rdx 6ce: 48 89 fb mov %rdi,%rbx 6d1: 8b 87 c8 05 00 00 mov 0x5c8(%rdi),%eax 6d7: 8b 72 04 mov 0x4(%rdx),%esi 6da: f7 d0 not %eax 6dc: 21 f0 and %esi,%eax 6de: 83 c0 01 add $0x1,%eax 6e1: 21 c6 and %eax,%esi 6e3: ff 92 88 00 00 00 call *0x88(%rdx) Reviewed-by:Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Signed-off-by:
-
Hawking Zhang authored
Data abort exception and unknown errors are supported. Signed-off-by:
-
Likun Gao authored
MMHUB v4.1.0 only support fixed cache mode, so only use legacy invalidation accordingly. Signed-off-by:
-
Sunil Khatri authored
Adding NOP packets one by one in the ring does not use the CP efficiently. Solution: Use CP optimization while adding NOP packet's so PFP can discard NOP packets based on information of count from the Header instead of fetching all NOP packets one by one. Reviewed-by:
-
Srinivasan Shanmugam authored
This commit adds a null check for the set_output_gamma function pointer in the dcn32_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma. Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
This commit adds a null check for the set_output_gamma function pointer in the dcn401_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma. Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit adds a null check for the set_output_gamma function pointer in the dcn20_set_output_transfer_func function. Previously, set_output_gamma was being checked for null at line 1030, but then it was being dereferenced without any null check at line 1048. This could potentially lead to a null pointer dereference error if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma at line 1048. Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Yifan Zhang authored
avoid using SDMA if it is unavailable. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Tim Huang <tim.huang@amd.com> Signed-off-by:
-
Sunil Khatri authored
Adding NOP packets one by one in the ring does not use the CP efficiently. Solution: Use CP optimization while adding NOP packet's so PFP can discard NOP packets based on information of count from the Header instead of fetching all NOP packets one by one. Reviewed-by:
-
Jonathan Kim authored
The number of watchpoints should be set and constrained per logical partition device, not by the socket device. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
Harish Kasiviswanathan <harish.kasiviswanathan@amd.com> Signed-off-by:
-
Sunil Khatri authored
Do not make a function call for zero size NOP as it does not add anything in the ring and is unnecessary function call. Reviewed-by:
-
Jonathan Kim authored
Support per-queue reset for GFX9. The recommendation is for the driver to target reset the HW queue via a SPI MMIO register write. Since this requires pipe and HW queue info and MEC FW is limited to doorbell reports of hung queues after an unmap failure, scan the HW queue slots defined by SET_RESOURCES first to identify the user queue candidates to reset. Only signal reset events to processes that have had a queue reset. If queue reset fails, fall back to GPU reset. Signed-off-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Sunil Khatri authored
Adding NOP packets one by one in the ring does not use the CP efficiently. Solution: Use CP optimization while adding NOP packet's so PFP can discard NOP packets based on information of count from the Header instead of fetching all NOP packets one by one. Cc: Christian König <christian.koenig@amd.com> Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Cc: Tvrtko Ursulin <tursulin@igalia.com> Cc: Marek Olšák <marek.olsak@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
This commit corrects the function comment for 'dpp401_dscl_program_isharp' in 'dcn401_dpp_dscl.c'. The comment previously included a description for a non-existent parameter 'bs_coeffs_updated'. This parameter description has been removed to reflect the function's actual parameters. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:981: warning: Excess function parameter 'bs_coeffs_updated' description in 'dpp401_dscl_program_isharp' Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Sunil Khatri authored
debugfs register list for dump is cleaned as it have some issues related to proper power state of the IP before register read. Since the above mentioned is removed we no longer want this to be dumped part of the devcoredump and hence removed. Reviewed-by:
-
Sunil Khatri authored
There are some problem with existing amdgpu_reset_dump_register_list debugfs node. It is supposed to read a list of registers but there could be cases when the IP is not in correct power state. Register read in such cases could lead to more problems. We are taking care of all such power states in devcoredump and dumping the registers of need for debugging. So cleaning this code and we dont need this functionality via debugfs anymore. Reviewed-by:
-
Kenneth Feng authored
add overdrive support on smu v14.0.2/3 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
This commit adds a null check for 'stream_status' in the function 'planes_changed_for_existing_stream'. Previously, the code assumed 'stream_status' could be null, but did not handle the case where it was actually null. This could lead to a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:3784 planes_changed_for_existing_stream() error: we previously assumed 'stream_status' could be null (see line 3774) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
