- 22 Oct, 2015 8 commits
-
-
Eran Ben Elisha authored
Current implementation for MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK is not supported when link layer is Ethernet. This patch will add counter based implementation for multicast loopback prevention. HW can drop multicast loopback packets if sender QP counter index is equal to receiver QP counter index. If qp flag MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK is set and link layer is Ethernet, create a new counter and attach it to the QP so it will continue receiving multicast loopback traffic but it's own. The decision if to create a new counter is being made at the qp modification to RTR after the QP's port is set. When QP is destroyed or moved back to reset state, delete the counter. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Eran Ben Elisha authored
This is an infrastructure step for allocating and attaching more than one counter to QPs on the same port. Allocate a counters table and manage the insertion and removals of the counters in load and unload of mlx4 IB. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Maor Gottlieb authored
Set the mcast loopback prevention bit in the QPC for ETH MLX QPs (not RSS QPs), when the firmware supports this feature. In addition, all rx ring QPs need to be updated in order not to enforce loopback checks. This prevents getting packets we sent both from the network stack and the HCA. Loopback prevention is done by comparing the counter indices of the sent and receiving QPs. If they're equal, packets aren't loopback-ed. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Maor Gottlieb authored
Update device capabilities regarding HW filtering multicast loopback support. Add MLX4_UPDATE_QP_ETH_SRC_CHECK_MC_LB attribute to mlx4_update_qp to enable changing QP context to support filtering incoming multicast loopback traffic according the sender's counter index. Set the corresponding bits in QP context to force the loopback source checks if attribute is given and HW supports it. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Eran Ben Elisha authored
Allow setting IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK at create_flags in ib_uverbs_create_qp_ex. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Eran Ben Elisha authored
ib_uverbs_ex_create_qp follows the extension verbs mechanism. New features (for example, QP creation flags field which is added in a downstream patch) could used via user-space libraries without breaking the ABI. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Hariprasad S authored
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Hariprasad S authored
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 21 Oct, 2015 18 commits
-
-
Selvin Xavier authored
Updating the version number to 11.0.0.0 Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Devesh Sharma authored
Changing CQ-Doorbell(DB) logic to prevent DB floods, it is supposed to be pressed only if any hw CQE is polled. If cq-arm was requested previously then don't bother about number of hw CQEs polled and arm the CQ. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Naga Irrinki authored
Some versions of the FW sends wrong QP or CQ IDs in the Async CQE. Adding a check to see whether qp or cq structures associated with the CQE is valid. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Selvin Xavier authored
debugfs_remove should be called before freeing the driver stats resources to avoid any crash during ocrdma_remove. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Selvin Xavier authored
ocrdma_dev_list is not used by the driver. So removing the references of this variable. dev->rcu was introduced for the ipv6 notifier for GID management. This is no longer required as the GID management is outside the HW driver. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Hariprasad S authored
The ESTABLISHED event should have the peer's ord/ird so swap the values in the event before the upcall. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Hariprasad S authored
When calculating the minimum ird in c4iw_accept_cr(), we need to always have a value of at least 1 if the RTR message is a 0B read. The code was incorrectly using ep->ord for this logic which was incorrectly adjusting the ird and causing incorrect ord/ird negotiation when using MPAv2 to negotiate these values. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Hariprasad S authored
This allows client ULPs to get the negotiated ord/ird which is useful to avoid stalling the SQ due to exceeding the ORD. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Hariprasad S authored
In c4iw_create_listen(), if we're using listen filters, then bail out of the busy loop if the device becomes fatally dead Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Arnd Bergmann authored
The INIT_UDATA() macro requires a pointer or unsigned long argument for both input and output buffer, and all callers had a cast from when the code was merged until a recent restructuring, so now we get core/uverbs_cmd.c: In function 'ib_uverbs_create_cq': core/uverbs_cmd.c:1481:66: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] This makes the code behave as before by adding back the cast to unsigned long. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 565197dd ("IB/core: Extend ib_uverbs_create_cq") Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Arnd Bergmann authored
Casting a pointer to __be64 produces a warning on 32-bit architectures: drivers/infiniband/hw/cxgb4/mem.c:147:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] req->wr.wr_lo = (__force __be64)&wr_wait; This was fixed at least twice for this driver in different places, and accidentally reverted once more. This puts the correct version back in place. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 6198dd8d ("iw_cxgb4: 32b platform fixes") Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Hal Rosenstock authored
IBA spec is now 1.3 not 3.1 and vol 1 should be mentioned as there is also vol 2. Signed-off-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Geliang Tang authored
Just fix a typo in the code comment. Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Insu Yun authored
Since kzalloc returns memory address, not error code, it should be checked whether it is null or not. Signed-off-by: Insu Yun <wuninsu@gmail.com> Reviewed-by: Dave Goodell <dgoodell@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Dave Goodell \(dgoodell\) authored
Upinder hasn't worked for Cisco for a little while now, updating to more active maintainers. Signed-off-by: Dave Goodell <dgoodell@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Insu Yun authored
Since ib_alloc_device returns allocated memory address, not error, it should be checked as IS_NULL, not IS_ERR_OR_NULL. Signed-off-by: Insu Yun <wuninsu@gmail.com> Reviewed-by: Dave Goodell <dgoodell@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Doug Ledford authored
Pick up the late fixes from the 4.3 cycle so we have them in our next branch.
-
Doron Tsur authored
ib_send_cm_sidr_rep could sometimes erase the node from the sidr (depending on errors in the process). Since ib_send_cm_sidr_rep is called both from cm_sidr_req_handler and cm_destroy_id, cm_id_priv could be either erased from the rb_tree twice or not erased at all. Fixing that by making sure it's erased only once before freeing cm_id_priv. Fixes: a977049d ('[PATCH] IB: Add the kernel CM implementation') Signed-off-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 20 Oct, 2015 4 commits
-
-
Haggai Eran authored
When discussing the patches to demux ids in rdma_cm instead of ib_cm, it was decided that it is best to use the P_Key value in the packet headers. However, the mlx5 and ipath drivers are currently unable to send correct P_Key values in GMP headers. They always send using a single P_Key that is set during the GSI QP initialization. Change the rdma_cm code to look at the P_Key value that is part of the packet payload as a workaround. Once the drivers are fixed this patch can be reverted. Fixes: 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM") Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Sasha Levin authored
Allocating a workqueue might fail, which wasn't checked so far and would lead to NULL ptr derefs when an attempt to use it was made. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Haggai Eran authored
If the lookup of a listening ID failed for an AF_IB request, the code would try to call dev_put() on a NULL net_dev. Fixes: be688195 ("IB/cma: Fix net_dev reference leak with failed requests") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Matan Barak authored
When using ifup/ifdown while executing enum_netdev_ipv4_ips, ifa could become invalid and cause use after free error. Fixing it by protecting with RCU lock. Fixes: 03db3a2d ('IB/core: Add RoCE GID table management') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 15 Oct, 2015 1 commit
-
-
Doron Tsur authored
When ib_cache_gid_set_default_gid is called from several threads, updating the table could make find_gid fail, therefore a negative index will be retruned and an invalid table entry will be used. Locking find_gid as well fixes this problem. Fixes: 03db3a2d ('IB/core: Add RoCE GID table management') Signed-off-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 13 Oct, 2015 1 commit
-
-
Christoph Lameter authored
When we leave the multicast group on expiration of a neighbor we do not free the mcast structure. This results in a memory leak that causes ib_dealloc_pd to fail and print a WARN_ON message and backtrace. Fixes: bd99b2e0 (IB/ipoib: Expire sendonly multicast joins) Signed-off-by: Christoph Lameter <cl@linux.com> Tested-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 06 Oct, 2015 3 commits
-
-
Haggai Eran authored
The netdev checks recently added to RDMA CM expect a valid netdev to be found for both InfiniBand and RoCE, but the code that find a netdev is only implemented for InfiniBand. Currently RoCE doesn't provide an API to find the netdev matching a given set of parameters, so this patch just disables the netdev enforcement for each incoming connections when the link layer is RoCE. Fixes: 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM") Reported-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Sagi Grimberg authored
There is no need to require LOCAL_DMA_LKEY support as the PD allocation makes sure that there is a local_dma_lkey. Also correctly set a return value in error path. This caused a NULL pointer dereference in mlx5 which removed the support for LOCAL_DMA_LKEY. Fixes: bb6c96d7 ("xprtrdma: Replace global lkey with lkey local to PD") Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Jeff Squyres authored
The usnic_verbs kernel module was clearly marked with the following in its code: MODULE_LICENSE("Dual BSD/GPL"); However, we accidentally left a few clauses of the BSD text out of the license header in all the source files. This commit fixes that: all the files are properly dual BSD/GPL-licensed. Contributors that might have been confused by this have been contacted to get their permission and are Cc:ed here. Cc: Benoit Taine <benoit.taine@lip6.fr> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Matan Barak <matanb@mellanox.com> Cc: Michael Wang <yun.wang@profitbricks.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jeff Squyres <jsquyres@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 29 Sep, 2015 2 commits
-
-
Bodong Wang authored
Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bodong Wang authored
Two enum members IB_DEVICE_RC_IP_CSUM and IB_DEVICE_RAW_IP_CSUM are added to ib_device_cap_flags. Device should set these two flags if they support insertion of UDP and TCP checksum on outgoing IPv4 messages and can verify the validity of checksum for incoming IPv4 messages, for RC IPoIB and RAW over Ethernet respectively. They are similar to IB_DEVICE_UD_IP_CSUM. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 27 Sep, 2015 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two bugfixes from Andy addressing at least some of the subtle NMI related wreckage which has been reported by Sasha Levin" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi/64: Fix a paravirt stack-clobbering bug in the NMI code x86/paravirt: Replace the paravirt nop with a bona fide empty function
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomass Gleixner: "A bugfix for the atmel aic5 irq chip driver which caches the wrong data and thereby breaking resume" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/atmel-aic5: Use per chip mask caches in mask/unmask()
-