- 18 May, 2017 37 commits
-
-
Mintz, Yuval authored
This pushes qed [and as result, all qed* drivers] into using 8.20.0.0 firmware. The changes are mostly contained in qed with minor changes to qedi due to some HSI changes. Content-wise, the firmware contains fixes to various issues exposed since the release of the previous firmware, including: - Corrects iSCSI fast retransmit when data digest is enabled. - Stop draining packets when receiving several consecutive PFCs. - Prevent possible assertion when consecutively opening/closing many connections. - Prevent possible assertion due to too long BDQ fetch time. In addition, the new firmware would allow us to later add iWARP support in qed and qedr. Changes from previous version ----------------------------- - V2: Fix warning in qed_debug.c Signed-off-by:
Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
skbs in (re)transmit queue no longer have a copy of jiffies at the time of the transmit : skb->skb_mstamp is now in usec unit, with no correlation to tcp_jiffies32. We have to convert rto from jiffies to usec, compute a time difference in usec, then convert the delta to HZ units. Fixes: 9a568de4 ("tcp: switch TCP TS option (RFC 7323) to 1ms clock") Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Colin Ian King authored
octeon_devices_lock can be made static as it does not need to be in global scope. Cleans up sparse warning: "warning: symbol 'octeon_devices_lock' was not declared. Should it be static?" Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.13-20170518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-05-18 this is a pull request of 4 patches for net-next/master. All 4 patches are by Quentin Schulz, they add deep deep Suspend/Resume support to the m_can driver. ==================== Signed-off-by:
-
Arkadi Sharshevsky authored
drivers/net/ethernet/mellanox/mlxsw//spectrum_dpipe.c:221:52: warning: Using plain integer as NULL pointer drivers/net/ethernet/mellanox/mlxsw//spectrum_dpipe.c:221:74: warning: Using plain integer as NULL pointer Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Eric Anholt authored
Cygnus is a small family of SoCs, of which we currently have devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the same as 58xx, just requiring a tiny bit of setup that was previously missing. Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: headers cleanup The DSA core files share a common private header file. Include the DSA public header there instead of independently in each core source file. DSA core and its drivers use switchdev, thus include switchdev.h in the public DSA header. This allows us to get rid of the forward declaration and use typedef defined by switchdev. ==================== Signed-off-by: -
Vivien Didelot authored
Now that the DSA public header includes switchdev.h, use the provided switchdev_obj_dump_cb_t typedef for the object dump callback. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
DSA drivers and core use switchdev. Include switchdev.h only once, in the dsa.h public header, so that inclusion in DSA drivers or forward declarations of switchdev structures in not necessary anymore. Signed-off-by:
-
Vivien Didelot authored
The public include/net/dsa.h file is meant for DSA drivers, while all DSA core files share a common private header net/dsa/dsa_priv.h file. Ensure that dsa_priv.h is the only DSA core file to include net/dsa.h, and add a new line to separate absolute and relative headers at the same time. Signed-off-by:
-
Andrey Vagin authored
This function has to return NULL on a error case, because there is a separate error variable. The offset has to be changed only if skb is returned v2: fix udp code to not use an extra variable Cc: Paolo Abeni <pabeni@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Fixes: 65101aec ("net/sock: factor out dequeue/peek with offset cod") Signed-off-by:
Andrei Vagin <avagin@openvz.org> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Alexey Dobriyan authored
struct dst_entry::dev is used most often. Move it so it can be accessed without imm8 offset on x86_64. add/remove: 0/0 grow/shrink: 9/239 up/down: 52/-413 (-361) function old new delta dst_rcu_free 126 138 +12 fnhe_flush_routes 211 219 +8 rt_set_nexthop 747 754 +7 rt_cache_route 85 91 +6 rt6_release 209 215 +6 dst_release 107 111 +4 dst_destroy_rcu 29 33 +4 dn_dst_check_expire 329 333 +4 dn_insert_route 484 485 +1 xfrm_resolve_and_create_bundle 2991 2990 -1 ... ip_route_me_harder 1163 1157 -6 __ip_append_data.isra 2730 2724 -6 ip6_forward 3052 3045 -7 callforward_do_filter 659 651 -8 dst_gc_task 571 549 -22 Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Holger Brunck authored
Signed-off-by:
Holger Brunck <holger.brunck@keymile.com> Signed-off-by:
-
Holger Brunck authored
This adds support for hdlc-bus mode to the fsl_ucc_hdlc driver. This can be enabled with the "fsl,hdlc-bus" property in the DTS node of the corresponding ucc. This aligns the configuration of the UPSMR and GUMR registers to what is done in our ucc_hdlc driver (that only support hdlc-bus mode) and with the QuickEngine's documentation for hdlc-bus mode. GUMR/SYNL is set to AUTO for the busmode as in this case the CD signal is ignored. The brkpt_support is enabled to set the HBM1 bit in the CMXUCR register to configure an open-drain connected HDLC bus. Signed-off-by:
-
Holger Brunck authored
Add the bitmask for the two bit SYNL register according to the QUICK Engine Reference Manual. Signed-off-by:
-
Holger Brunck authored
We can't assume that we are always in loopback mode if rx and tx clock have the same clock source. If we want to use HDLC busmode we also have the same clock source but we are not in loopback mode. So move the setting of the baudrate generator after the check for property for the loopback mode. Signed-off-by:
-
Holger Brunck authored
We need space for the struct qe_bd and not for a pointer to this struct. Signed-off-by:
-
Holger Brunck authored
Signed-off-by:
-
Holger Brunck authored
This fixes the following compiler warnings: drivers/net/wan/fsl_ucc_hdlc.c: In function 'ucc_hdlc_poll': warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] skb->mac_header = skb->data - skb->head; and drivers/net/wan/fsl_ucc_hdlc.c: In function 'ucc_hdlc_probe': drivers/net/wan/fsl_ucc_hdlc.c:1127:3: warning: 'utdm' may be used uninitialized in this function [-Wmaybe-uninitialized] kfree(utdm); Signed-off-by:
-
Holger Brunck authored
Some of the tracing seems to be remaining traces for basic driver development. They can be removed now, as they cause noisy printouts. Signed-off-by:
-
Alexey Dobriyan authored
4 billion packet queue is something unthinkable so use 32-bit value for now. Space savings on x86_64: add/remove: 0/0 grow/shrink: 3/70 up/down: 16/-131 (-115) function old new delta change_tx_queue_len 94 108 +14 qdisc_create 1176 1177 +1 alloc_netdev_mqs 1124 1125 +1 xenvif_alloc 533 532 -1 x25_asy_setup 167 166 -1 ... tun_queue_resize 945 940 -5 pfifo_fast_enqueue 167 162 -5 qfq_init_qdisc 168 158 -10 tap_queue_resize 810 799 -11 transmit 719 698 -21 Signed-off-by:
-
Colin Ian King authored
Function udp_skb_dtor_locked does not need to be in global scope so make it static to fix sparse warning: net/ipv4/udp.c: warning: symbol 'udp_skb_dtor_locked' was not declared. Should it be static? Fixes: 6dfb4367 ("udp: keep the sk_receive_queue held when splicing") Signed-off-by:
-
David S. Miller authored
Jason Wang says: ==================== vhost_net rx batch dequeuing This series tries to implement rx batching for vhost-net. This is done by batching the dequeuing from skb_array which was exported by underlayer socket and pass the sbk back through msg_control to finish userspace copying. This is also the requirement for more batching implemention on rx path. Tests shows at most 7.56% improvment bon rx pps on top of batch zeroing and no obvious changes for TCP_STREAM/TCP_RR result. Please review. Thanks Changes from V4: - drop batch zeroing patch - renew the performance numbers - move skb pointer array out of vhost_net structure Changes from V3: - add batch zeroing patch to fix the build warnings Changes from V2: - rebase to net-next HEAD - use unconsume helpers to put skb back on releasing - introduce and use vhost_net internal buffer helpers - renew performance numbers on top of batch zeroing Changes from V1: - switch to use for() in __ptr_ring_consume_batched() - rename peek_head_len_batched() to fetch_skbs() - use skb_array_consume_batched() instead of skb_array_consume_batched_bh() since no consumer run in bh - drop the lockless peeking patch since skb_array could be resized, so it's not safe to call lockless one ==================== Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jason Wang authored
We used to dequeue one skb during recvmsg() from skb_array, this could be inefficient because of the bad cache utilization and spinlock touching for each packet. This patch tries to batch them by calling batch dequeuing helpers explicitly on the exported skb array and pass the skb back through msg_control for underlayer socket to finish the userspace copying. Batch dequeuing is also the requirement for more batching improvement on receive path. Tests were done by pktgen on tap with XDP1 in guest. Host is Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz. rx batch | pps 0 2.25Mpps 1 2.33Mpps (+3.56%) 4 2.33Mpps (+3.56%) 16 2.35Mpps (+4.44%) 64 2.42Mpps (+7.56%) <- Default rx batching 128 2.40Mpps (+6.67%) 256 2.38Mpps (+5.78%) Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Jason Wang authored
This patch makes tap_recvmsg() can receive from skb from its caller through msg_control. Vhost_net will be the first user. Signed-off-by:
-
Jason Wang authored
This patch makes tun_recvmsg() can receive from skb from its caller through msg_control. Vhost_net will be the first user. Signed-off-by:
-
Jason Wang authored
This patch exports skb_array through tap_get_skb_array(). Caller can then manipulate skb array directly. Signed-off-by:
-
Jason Wang authored
This patch exports skb_array through tun_get_skb_array(). Caller can then manipulate skb array directly. Signed-off-by:
-
Jason Wang authored
Signed-off-by:
-
Jason Wang authored
This patch introduce a batched version of consuming, consumer can dequeue more than one pointers from the ring at a time. We don't care about the reorder of reading here so no need for compiler barrier. Signed-off-by:
-
Jason Wang authored
Signed-off-by:
-
Michael S. Tsirkin authored
Applications that consume a batch of entries in one go can benefit from ability to return some of them back into the ring. Add an API for that - assuming there's space. If there's no space naturally can't do this and have to drop entries, but this implies ring is full so we'd likely drop some anyway. Signed-off-by:
-
Quentin Schulz authored
This adds Power Management deep Suspend/Resume support for Bosch M_CAN chip. When entering deep sleep, the clocks are gated, the interrupts are disabled. When resuming from deep sleep, the chip needs to be reinitialized, the clocks ungated and the interrupts enabled. Signed-off-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Quentin Schulz authored
This creates a function to ungate M_CAN clocks and another to gate the same clocks, then swaps all gating/ungating code with their respective function. Signed-off-by:
-
Quentin Schulz authored
This moves clocks gating outside of the m_can_stop function as the m_can_start function does not (and cannot, at least in current implementation) ungate clocks. This way, both functions can now be used symmetrically. Signed-off-by:
-
Quentin Schulz authored
To avoid possible ECC/parity checksum errors when reading an uninitialized buffer, the entire Message RAM is initialized when probing the driver. This initialization is done in the same function reading the Device Tree properties. This patch moves the RAM initialization to a separate function so it can be called separately from device initialization from Device Tree. Signed-off-by:
-
- 17 May, 2017 3 commits
-
-
David S. Miller authored
Andrew Lunn says: ==================== net: phy: marvell: Checkpatch cleanup I will be contributing a few new features to the Marvell PHY driver soon. Start by making the code mostly checkpatch clean. There should not be any functional changes. Just comments set into the correct format, missing blank lines, turn some comparisons around, and refactoring to reduce indentation depth. There is still one camel in the code, but it actually makes sense, so leave it in piece. ==================== Signed-off-by: -
Andrew Lunn authored
Fold lines longer than 80 characters Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
Makes the code a bit more readable, and solves quite a few checkpatch warnings of lines longer than 80 characters. Signed-off-by:
-
