Kalle Valo says:

====================
wireless fixes for v6.0

First set of fixes for v6.0. Small one this time, fix a cfg80211
warning seen with brcmfmac and remove an unncessary inline keyword
from wilc1000.

* tag 'wireless-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: wilc1000: fix spurious inline in wilc_handle_disconnect()
  wifi: cfg80211: Fix validating BSS pointers in __cfg80211_connect_result
====================

Link: https://lore.kernel.org/r/20220809164756.B1DAEC433D6@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fixes various issues related to ISO channel/socket support
 - Fixes issues when building with C=1
 - Fix cancel uninitilized work which blocks syzbot to run

* tag 'for-net-2022-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: ISO: Fix not using the correct QoS
  Bluetooth: don't try to cancel uninitialized works at mgmt_index_removed()
  Bluetooth: ISO: Fix iso_sock_getsockopt for BT_DEFER_SETUP
  Bluetooth: MGMT: Fixes build warnings with C=1
  Bluetooth: hci_event: Fix build warning with C=1
  Bluetooth: ISO: Fix memory corruption
  Bluetooth: Fix null pointer deref on unexpected status event
  Bluetooth: ISO: Fix info leak in iso_sock_getsockopt()
  Bluetooth: hci_conn: Fix updating ISO QoS PHY
  Bluetooth: ISO: unlock on error path in iso_sock_setsockopt()
  Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression
====================

Link: https://lore.kernel.org/r/20220809001224.412807-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since
commit e6e771b3 ("s390/qeth: detach netdevice while card is offline")
there was a timing window during recovery, that qeth_query_card_info could
be sent to the card, even before it was ready for it, leading to a failing
card recovery. There is evidence that this window was hit, as not all
callers of get_link_ksettings() check for netif_device_present.

Use cached values in qeth_get_link_ksettings(), instead of calling
qeth_query_card_info() and falling back to default values in case it
fails. Link info is already updated when the card goes online, e.g. after
STARTLAN (physical link up). Set the link info to default values, when the
card goes offline or at STOPLAN (physical link down). A follow-on patch
will improve values reported for link down.

Fixes: e6e771b3 ("s390/qeth: detach netdevice while card is offline")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Link: https://lore.kernel.org/r/20220805155714.59609-1-wintera@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If CONFIG_NVMEM is not set of_nvmem_cell_get, of_nvmem_device_get
functions will return ERR_PTR(-EOPNOTSUPP) and "failed to get nvmem
cell io_impedance_ctrl" error would be reported despite "io_impedance_ctrl"
is completely missing in Device Tree and we should use default values.

Check -EOPNOTSUPP togather with -ENOENT to avoid this situation.

Fixes: 5c2d0a6a ("net: phy: dp83867: implement support for io_impedance_ctrl nvmem cell")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805084843.24542-1-nikita.shubin@maquefel.meSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In case master/slave clock role is not specified (which is default), the
aneg registers will not be written.

The visible impact of this is missing pause advertisement.

So, rework genphy_c45_baset1_an_config_aneg() to be able to write
advertisement registers even if clock role is unknown.

Fixes: 3da8ffd8 ("net: phy: Add 10BASE-T1L support in phy-c45")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805073159.908643-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There are use-after-free bugs caused by tst_timer. The root cause
is that there are no functions to stop tst_timer in idt77252_exit().
One of the possible race conditions is shown below:

    (thread 1)          |        (thread 2)
                        |  idt77252_init_one
                        |    init_card
                        |      fill_tst
                        |        mod_timer(&card->tst_timer, ...)
idt77252_exit           |  (wait a time)
                        |  tst_timer
                        |
                        |    ...
  kfree(card) // FREE   |
                        |    card->soft_tst[e] // USE

The idt77252_dev is deallocated in idt77252_exit() and used in
timer handler.

This patch adds del_timer_sync() in idt77252_exit() in order that
the timer handler could be stopped before the idt77252_dev is
deallocated.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220805070008.18007-1-duoming@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

min_gate_len[tc] is supposed to track the shortest interval of
continuously open gates for a traffic class. For example, in the
following case:

TC 76543210

t0 00000001b 200000 ns
t1 00000010b 200000 ns

min_gate_len[0] and min_gate_len[1] should be 200000, while
min_gate_len[2-7] should be 0.

However what happens is that min_gate_len[0] is 200000, but
min_gate_len[1] ends up being 0 (despite gate_len[1] being 200000 at the
point where the logic detects the gate close event for TC 1).

The problem is that the code considers a "gate close" event whenever it
sees that there is a 0 for that TC (essentially it's level rather than
edge triggered). By doing that, any time a gate is seen as closed
without having been open prior, gate_len, which is 0, will be written
into min_gate_len. Once min_gate_len becomes 0, it's impossible for it
to track anything higher than that (the length of actually open
intervals).

To fix this, we make the writing to min_gate_len[tc] be edge-triggered,
which avoids writes for gates that are closed in consecutive intervals.
However what this does is it makes us need to special-case the
permanently closed gates at the end.

Fixes: 55a515b1 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220804202817.1677572-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When a userspace application starts a blocking connect(), a CALL REQUEST
is sent, the t21 timer is started and the connect is waiting in
x25_wait_for_connection_establishment(). If then for some reason the t21
timer expires before any reaction on the assigned logical channel (e.g.
CALL ACCEPT, CLEAR REQUEST), there is sent a CLEAR REQUEST and timer
t23 is started waiting for a CLEAR confirmation. If we now receive a
CLEAR CONFIRMATION from the peer, x25_disconnect() is called in
x25_state2_machine() with reason "0", which means "normal" call
clearing. This is ok, but the parameter "reason" is used as sk->sk_err
in x25_disconnect() and sock_error(sk) is evaluated in
x25_wait_for_connection_establishment() to check if the call is still
pending. As "0" is not rated as an error, the connect will stuck here
forever.

To fix this situation, also check if the sk->sk_state changed form
TCP_SYN_SENT to TCP_CLOSE in the meantime, which is also done by
x25_disconnect().
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20220805061810.10824-1-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Gerhard Engleder says:

====================
tsnep: Two fixes for the driver

Two simple bugfixes for tsnep driver.
====================

Link: https://lore.kernel.org/r/20220804183935.73763-1-gerhard@engleder-embedded.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If tsnep_tx_map() fails, then tsnep_tx_unmap() shall start at the write
index like tsnep_tx_map(). This is different to the normal operation.
Thus, add an additional parameter to tsnep_tx_unmap() to enable start at
different positions for successful TX and failed TX.

Fixes: 403f69bb ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Kernel test robot found the following warning:

drivers/net/ethernet/engleder/tsnep_main.c:1254:34: warning:
'tsnep_of_match' defined but not used [-Wunused-const-variable=]

of_match_ptr() compiles into NULL if CONFIG_OF is disabled.
tsnep_of_match exists always so use of of_match_ptr() is useless.
Fix warning by dropping of_match_ptr().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This fixes using wrong QoS settings when attempting to send frames while
acting as peripheral since the QoS settings in use are stored in
hconn->iso_qos not in sk->qos, this is actually properly handled on
getsockopt(BT_ISO_QOS) but not on iso_send_frame.

Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

syzbot is reporting attempt to cancel uninitialized work at
mgmt_index_removed() [1], for calling cancel_delayed_work_sync() without
INIT_DELAYED_WORK() is not permitted.

INIT_DELAYED_WORK() is called from mgmt_init_hdev() via chan->hdev_init()
 from hci_mgmt_cmd(), but cancel_delayed_work_sync() is unconditionally
called from mgmt_index_removed().

Call cancel_delayed_work_sync() only if HCI_MGMT flag was set, for
mgmt_init_hdev() sets HCI_MGMT flag when calling INIT_DELAYED_WORK().

Link: https://syzkaller.appspot.com/bug?extid=b8ddd338a8838e581b1c [1]
Reported-by: syzbot <syzbot+b8ddd338a8838e581b1c@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 0ef08313 ("Bluetooth: Convert delayed discov_off to hci_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

BT_DEFER_SETUP shall be considered valid for all states except for
BT_CONNECTED as it is also used when initiated a connection rather then
only for BT_BOUND and BT_LISTEN.

Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This fixes the following warning when building with make C=1:

net/bluetooth/mgmt.c:3821:29: warning: restricted __le16 degrades to integer
net/bluetooth/mgmt.c:4625:9: warning: cast to restricted __le32

Fixes: 600a8749 ("Bluetooth: Implementation of MGMT_OP_SET_BLOCKED_KEYS.")
Fixes: 4c54bf2b ("Bluetooth: Add get/set device flags mgmt op")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This fixes the following warning when build with make C=1:

net/bluetooth/hci_event.c:337:15: warning: restricted __le16 degrades to integer

Fixes: a9366120 ("Bluetooth: Process result of HCI Delete Stored Link Key command")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The following memory corruption can happen since iso_pinfo.base size
did not account for its headers (4 bytes):

net/bluetooth/eir.c
    76          memcpy(&eir[eir_len], data, data_len);
                            ^^^^^^^         ^^^^^^^^
    77          eir_len += data_len;
    78
    79          return eir_len;
    80  }

The "eir" buffer has 252 bytes and data_len is 252 but we do a memcpy()
to &eir[4] so this can corrupt 4 bytes beyond the end of the buffer.

Fixes: f764a6c2 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>

__hci_cmd_sync returns NULL if the controller responds with a status
event. This is unexpected for the commands sent here, but on
occurrence leads to null pointer dereferences and thus must be
handled.
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The C standard rules for when struct holes are zeroed out are slightly
weird.  The existing assignments might initialize everything, but GCC
is allowed to (and does sometimes) leave the struct holes uninitialized,
so instead of using yet another variable and copy the QoS settings just
use a pointer to the stored QoS settings.

Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

BT_ISO_QOS has different semantics when it comes to QoS PHY as it uses
0x00 to disable a direction but that value is invalid over HCI and
sockets using DEFER_SETUP to connect may attempt to use hci_bind_cis
multiple times in order to detect if the parameters have changed, so to
fix the code will now just mirror the PHY for the parameters of
HCI_OP_LE_SET_CIG_PARAMS and will not update the PHY of the socket
leaving it disabled.

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Call release_sock(sk); before returning on this error path.

Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The patch d0be8347: "Bluetooth: L2CAP: Fix use-after-free caused
by l2cap_chan_put" from Jul 21, 2022, leads to the following Smatch
static checker warning:

        net/bluetooth/l2cap_core.c:1977 l2cap_global_chan_by_psm()
        error: we previously assumed 'c' could be null (see line 1996)

Fixes: d0be8347 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The commit d1361840 ("tcp: fix SO_RCVLOWAT and RCVBUF autotuning")
add one new (struct proto_ops)->set_rcvlowat method so that a protocol
can override the default setsockopt(SO_RCVLOWAT) behavior.

The prior bpf codes don't check and invoke the protos's set_rcvlowat,
now correct it.
Signed-off-by: Gao Feng <gfree.wind@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we call xdp_convert_buff_to_frame() to get xdpf, if it returns
NULL, we should check if xdp_page was allocated by xdp_linearize_page().
If it is newly allocated, it should be freed here alone. Just like any
other "goto err_xdp".

Fixes: 44fa2dbd ("xdp: transition into using xdp_frame for ndo_xdp_xmit")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sparse warns:

drivers/net/wireless/microchip/wilc1000/hif.h:218:35: error: marked inline, but without a definition

Remove the inline, it's not needed.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220801110440.13144-1-kvalo@kernel.org

Driver's SME is allowed to fill either BSSID or BSS pointers in struct
cfg80211_connect_resp_params when indicating connect response but a
check in __cfg80211_connect_result() is giving unnecessary warning when
driver's SME fills only BSSID pointer and not BSS pointer in struct
cfg80211_connect_resp_params.

In case of mac80211 with auth/assoc path, it is always expected to fill
BSS pointers in struct cfg80211_connect_resp_params when calling
__cfg80211_connect_result() since cfg80211 must have hold BSS pointers
in cfg80211_mlme_assoc().

So, skip the check for the drivers which support cfg80211 connect
callback, for example with brcmfmac is one such driver which had the
warning:

WARNING: CPU: 5 PID: 514 at net/wireless/sme.c:786 __cfg80211_connect_result+0x2fc/0x5c0 [cfg80211]
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: efbabc11 ("cfg80211: Indicate MLO connection info in connect and roam callbacks")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
[kvalo@kernel.org: add more info to the commit log]
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220805135259.4126630-1-quic_vjakkam@quicinc.com

Fixes the following warnings observed when building
CONFIG_IPV6_SEG6_LWTUNNEL=y with clang:

  net/ipv6/seg6_local.o: warning: objtool: seg6_local_fill_encap() falls
  through to next function seg6_local_get_encap_size()
  net/ipv6/seg6_local.o: warning: objtool: seg6_local_cmp_encap() falls
  through to next function input_action_end()

LLVM can fully unroll loops in seg6_local_get_encap_size() and
seg6_local_cmp_encap(). One issue in those loops is that the induction
variable is initialized to 0. The loop iterates over members of
seg6_action_params, a global array of struct seg6_action_param calling
their put() function pointer members.  seg6_action_param uses an array
initializer to initialize SEG6_LOCAL_SRH and later elements, which is
the third enumeration of an anonymous union.

The guard `if (attrs & SEG6_F_ATTR(i))` may prevent this from being
called at runtime, but it would still be UB for
`seg6_action_params[0]->put` to be called; the unrolled loop will make
the initial iterations unreachable, which LLVM will later rotate to
fallthrough to the next function.

Make this more obvious that this cannot happen to the compiler by
initializing the loop induction variable to the minimum valid index that
seg6_action_params is initialized to.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220802161203.622293-1-ndesaulniers@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid the PHY library call unnecessarily into the suspend/resume functions by
setting phydev->mac_managed_pm to true. The GENET driver essentially does
exactly what mdio_bus_phy_resume() does by calling phy_init_hw() plus
phy_resume().

Fixes: fba863b8 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220804173605.1266574-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The text was copy&pasted from Intel, adjust it to say Wangxun.
Reported-by: Ingo Saitz <ingo@hannover.ccc.de>
Fixes: 3ce7547e ("net: txgbe: Add build support for txgbe")
Link: https://lore.kernel.org/r/20220804182641.1442000-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

rose /proc code does not serialize timer accesses.

Initial report by Bernard F6BVP Pidoux exhibits overflow amounting
to 116 ticks on its HZ=250 system.

Full timer access serialization would imho be overkill as rose /proc
does not enforce consistency between displayed ROSE_STATE_XYZ and
timer values during changes of state.

The patch may also fix similar behavior in ax25 /proc, ax25 ioctl
and netrom /proc as they all exhibit the same timer serialization
policy. This point has not been reported though.

The sole remaining use of ax25_display_timer - ax25 rtt valuation -
may also perform marginally better but I have not analyzed it too
deeply.

Cc: Thomas DL9SAU Osterried <thomas@osterried.de>
Link: https://lore.kernel.org/all/d5e93cc7-a91f-13d3-49a1-b50c11f0f811@free.fr/Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Bernard Pidoux <f6bvp@free.fr>
Link: https://lore.kernel.org/r/Yuk9vq7t7VhmnOXu@electric-eye.fr.zoreil.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For packets scheduled to RPM and LBK, NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
selects the TL3 or TL2 scheduling level as the one used for link/channel
selection and backpressure. For each scheduling queue at the selected
level: Setting NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG[ENA] = 1 allows
the TL3/TL2 queue to schedule packets to a specified RPM or LBK link
and channel.

There is an issue in the code where NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
is set to TL3 where as the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG is
configured for TL2 queue in some cases. As a result packets will not
transmit on that link/channel. This patch fixes the issue by configuring
the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG register depending on the
NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] value.

Fixes: caa2da34 ("octeontx2-pf: Initialize and config queues")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20220802142813.25031-1-naveenm@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Subbaraya Sundeep says:

====================
Octeontx2 AF driver fixes for NPC

This patchset includes AF driver fixes wrt packet parser NPC.
Following are the changes:

Patch 1: The parser nibble configuration must be same for
TX and RX interfaces and if not fix up is applied. This fixup was
applied only for default profile currently and it has been fixed
to apply for all profiles.
Patch 2: Firmware image may not be present all times in the kernel image
and default profile is used mostly hence suppress the warning.
Patch 3: This patch fixes a corner case where NIXLF is detached but
without freeing its mcam entries which results in resource leak.
Patch 4: SMAC is overlapped with DMAC mistakenly while installing
rules based on SMAC. This patch fixes that.
====================

Link: https://lore.kernel.org/r/1659513255-28667-1-git-send-email-sbhatta@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Given a field with its location/offset in input packet,
the key checking logic verifies whether extracting the
field can be supported or not based on the mkex profile
loaded in hardware. This logic is wrong wrt source mac
and this patch fixes that.

Fixes: 9b179a96 ("octeontx2-af: Generate key field bit mask from KEX profile")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The teardown sequence in FLR handler returns if no NIX LF
is attached to PF/VF because it indicates that graceful
shutdown of resources already happened. But there is a
chance of all allocated MCAM entries not being freed by
PF/VF. Hence free mcam entries even in case of detached LF.

Fixes: c554f9c1 ("octeontx2-af: Teardown NPA, NIX LF upon receiving FLR")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The packet parser profile supplied as firmware may not
be present all the time and default profile is used mostly.
Hence suppress firmware loading warning from kernel due to
absence of firmware in kernel image.

Fixes: 3a724415 ("octeontx2-af: add support for custom KPU entries")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

NPC_PARSE_NIBBLE for TX interface has to be equal to the RX one for some
silicon revisions. Mistakenly this fixup was only applied to the default
MKEX profile while it should also be applied to any loaded profile.

Fixes: 1c1935c9 ("octeontx2-af: Add NIX1 interfaces to NPC")
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add Nick Child as the maintainer of the IBM Power Virtual Ethernet
Device Driver, replacing Cristobal Forno.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20220803155246.39582-1-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_ethtool.h is included twice in bnxt_devlink.c,
remove one of them.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1817Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220804003722.54088-1-yang.lee@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Westphal says:

====================
netfilter followup fixes for net

Regressions, since 5.19:
Fix crash when packet tracing is enabled via 'meta nftrace set 1' rule.
Also comes with a test case.

Regressions, this cycle:
Fix Kconfig dependency for the flowtable /proc interface, we want this
to be off by default.
====================

Link: https://lore.kernel.org/r/20220804172629.29748-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove default to 'y', this infrastructure is not fundamental for the
flowtable operational.

Add a missing dependency on CONFIG_NF_FLOW_TABLE.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: b0381776 ("netfilter: nf_flow_table: count pending offload workqueue tasks")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>