- 09 Sep, 2016 22 commits
-
-
Zhen Lei authored
1. Remove the old binding code. 2. Read the nid of cpu0 from dts. 3. Fallback the nid of cpu0 to 0 when numa=off is set in bootargs. Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by:
Will Deacon <will.deacon@arm.com>
-
Zhen Lei authored
When the deleted code is executed, only the bit of cpu0 was set on cpu_possible_mask. So that, only set_cpu_numa_node(0, NUMA_NO_NODE); will be executed. And map_cpu_to_node(0, 0) will soon be called. So these code can be safely removed. Signed-off-by:
-
Zhen Lei authored
To make each percpu area allocated from its local numa node. Without this patch, all percpu areas will be allocated from the node which cpu0 belongs to. Signed-off-by:
-
Kefeng Wang authored
Use pr_fmt to prefix kernel output, and remove duplicated msg of NUMA turned off. Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Kefeng Wang authored
Use pr_fmt to prefix kernel output. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Kefeng Wang authored
Use of_get_next_parent() instead of open-code. Signed-off-by:
-
Zhen Lei authored
numa_init may return error because of numa configuration error. So "No NUMA configuration found" is inaccurate. In fact, specific configuration error information should be immediately printed by the testing branch. Signed-off-by:
-
Zhen Lei authored
This warning has been printed in of_numa_parse_cpu_nodes before. Signed-off-by:
-
Zhen Lei authored
If the numa-id which was configured in memory@ devicetree node is greater than MAX_NUMNODES, we should report a warning. We have done this for cpus and distance-map dt nodes, this patch help them to be consistent. Acked-by:
-
Zhen Lei authored
For a normal memory@ devicetree node, its reg property can contains more memory blocks. Because we don't known how many memory blocks maybe contained, so we try from index=0, increase 1 until error returned(the end). Signed-off-by:
-
Zhen Lei authored
This information will be printed in the subfunction numa_add_memblk. They are not the same, but very similar. Signed-off-by:
-
Mark Rutland authored
In systems with heterogeneous CPUs, there are multiple logical CPU PMUs, each of which covers a subset of CPUs in the system. In some cases userspace needs to know which CPUs a given logical PMU covers, so we'd like to expose a cpumask under sysfs, similar to what is done for uncore PMUs. Unfortunately, prior to commit 00e727bb ("perf stat: Balance opening and reading events"), perf stat only correctly handled a cpumask holding a single CPU, and only when profiling in system-wide mode. In other cases, the presence of a cpumask file could cause perf stat to behave erratically. Thus, exposing a cpumask file would break older perf binaries in cases where they would otherwise work. To avoid this issue while still providing userspace with the information it needs, this patch exposes a differently-named file (cpus) under sysfs. New tools can look for this and operate correctly, while older tools will not be adversely affected by its presence. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Mark Rutland authored
Now that the 32-bit and 64-bit perf backends use the common groups directly, remove the fallback and no longer allow the groups array to be overridden. Signed-off-by:
-
Mark Rutland authored
By using a common attr_groups array, the common arm_pmu code can set up common files (e.g. cpumask) for us in subsequent patches. Signed-off-by:
-
Mark Rutland authored
By using a common attr_groups array, the common arm_pmu code can set up common files (e.g. cpumask) for us in subsequent patches. Signed-off-by:
-
Mark Rutland authored
In preparation for adding common attribute groups, add an array of attribute group pointers to arm_pmu, which will be used if the backend hasn't already set pmu::attr_groups. Subsequent patches will move backends over to using these, before adding common fields. Signed-off-by:
-
Mark Rutland authored
When CONFIG_PID_IN_CONTEXTIDR is not selected, we use an empty stub definition of contextidr_thread_switch(). As everything we rely upon exists regardless of CONFIG_PID_IN_CONTEXTIDR, we don't strictly require an empty stub. By using IS_ENABLED() rather than ifdeffery, we avoid duplication, and get compiler coverage on all the code even when CONFIG_PID_IN_CONTEXTIDR is not selected and the code is optimised away. Signed-off-by:
-
Mark Rutland authored
A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these across arm64 to make code shorter and clearer. For sequences with a trailing ISB, the existing isb() macro is also used so that asm blocks can be removed entirely. A few uses of inline assembly for msr/mrs are left as-is. Those manipulating sp_el0 for the current thread_info value have special clobber requiremends. Signed-off-by: -
Mark Rutland authored
A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 KVM code to make the code shorter and clearer. At the same time, a comment style violation next to a system register access is fixed up in reset_pmcr, and comments describing whether operations are reads or writes are removed as this is now painfully obvious. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by:Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Mark Rutland authored
A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 DCC accessors to make the code shorter and clearer. Signed-off-by: -
Mark Rutland authored
A while back we added {read,write}_sysreg accessors to handle accesses to system registers, without the usual boilerplate asm volatile, temporary variable, etc. This patch makes use of these in the arm64 arch timer accessors to make the code shorter and clearer. Signed-off-by: -
Mark Rutland authored
Currently write_sysreg has to allocate a temporary register to write zero to a system register, which is unfortunate given that the MSR instruction accepts XZR as an operand. Allow XZR to be used when appropriate by fiddling with the assembly constraints. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
- 08 Sep, 2016 1 commit
-
-
Robin Murphy authored
When zeroing an I/O location, the current accessors are forced to allocate a temporary register to store the zero for the write. By tweaking the assembly constraints, we can allow the compiler to use the zero register directly in such cases, and save some juggling. Compiling a representative kernel configuration with GCC 6 shows that 2.3KB worth of code can be wasted just on that! text data bss dec hex filename 13316776 3248256 18176769 34741801 2121e29 vmlinux.o.new 13319140 3248256 18176769 34744165 2122765 vmlinux.o.old Acked-by:
-
- 07 Sep, 2016 2 commits
-
-
Catalin Marinas authored
This patch adds static keys transparently for all the cpu_hwcaps features by implementing an array of default-false static keys and enabling them when detected. The cpus_have_cap() check uses the static keys if the feature being checked is a constant, otherwise the compiler generates the bitmap test. Because of the early call to static_branch_enable() via check_local_cpu_errata() -> update_cpu_capabilities(), the jump labels are initialised in cpuinfo_store_boot_cpu(). Cc: Will Deacon <will.deacon@arm.com> Cc: Suzuki K. Poulose <Suzuki.Poulose@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Catalin Marinas authored
The static key API is currently designed around single variable definitions. There are cases where an array of static keys is desirable, so extend the API to allow this rather than using the internal static key implementation directly. Cc: Jason Baron <jbaron@akamai.com> Cc: Jonathan Corbet <corbet@lwn.net> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Suggested-by:
Dave P Martin <Dave.Martin@arm.com> Signed-off-by:
-
- 06 Sep, 2016 2 commits
-
-
Kefeng Wang authored
There is only fixup_init() in mm.h , and it is only called in free_initmem(), so move the codes from fixup_init() into free_initmem(), then drop fixup_init() and mm.h. Acked-by:
-
Marc Zyngier authored
As declared by the chief penguin, and enforced by the NO_IRQ brigade, IRQ0 doesn't exist, and is considered as an error (no irq). Unfortunately, the arm_pmu driver still considers it as valid in a large number of cases. Let's fix this. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
- 05 Sep, 2016 3 commits
-
-
Pratyush Anand authored
Currently, enabling stacktrace of a kprobe events generates warning: echo stacktrace > /sys/kernel/debug/tracing/trace_options echo "p xhci_irq" > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable save_stack_trace_regs() not implemented yet. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at ../kernel/stacktrace.c:74 save_stack_trace_regs+0x3c/0x48 Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc4-dirty #5128 Hardware name: ARM Juno development board (r1) (DT) task: ffff800975dd1900 task.stack: ffff800975ddc000 PC is at save_stack_trace_regs+0x3c/0x48 LR is at save_stack_trace_regs+0x3c/0x48 pc : [<ffff000008126c64>] lr : [<ffff000008126c64>] pstate: 600003c5 sp : ffff80097ef52c00 Call trace: save_stack_trace_regs+0x3c/0x48 __ftrace_trace_stack+0x168/0x208 trace_buffer_unlock_commit_regs+0x5c/0x7c kprobe_trace_func+0x308/0x3d8 kprobe_dispatcher+0x58/0x60 kprobe_breakpoint_handler+0xbc/0x18c brk_handler+0x50/0x90 do_debug_exception+0x50/0xbc This patch implements save_stack_trace_regs(), so that stacktrace of a kprobe events can be obtained. After this patch, there is no warning and we can see the stacktrace for kprobe events in trace buffer. more /sys/kernel/debug/tracing/trace <idle>-0 [004] d.h. 1356.000496: p_xhci_irq_0:(xhci_irq+0x0/0x9ac) <idle>-0 [004] d.h. 1356.000497: <stack trace> => xhci_irq => __handle_irq_event_percpu => handle_irq_event_percpu => handle_irq_event => handle_fasteoi_irq => generic_handle_irq => __handle_domain_irq => gic_handle_irq => el1_irq => arch_cpu_idle => default_idle_call => cpu_startup_entry => secondary_start_kernel => Tested-by:David A. Long <dave.long@linaro.org> Reviewed-by:
James Morse <james.morse@arm.com> Signed-off-by:
Pratyush Anand <panand@redhat.com> Signed-off-by:
-
Ard Biesheuvel authored
Commit b5fe2429 ("arm64: kernel: fix style issues in sleep.S") changed the linkage of _cpu_resume() to local, even though the symbol is also referenced from hibernate.c. So revert this change. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
James Morse authored
The code that provides /dev/mem uses xlate_dev_mem_{k,}ptr() to avoid making a cachable mapping of a non-cachable area on ia64. On arm64 we do this via phys_mem_access_prot() instead, but provide dummy versions of xlate_dev_mem_{k,}ptr(). These are the same as those in asm-generic/io.h, which we include from asm/io.h Signed-off-by:
-
- 02 Sep, 2016 8 commits
-
-
Will Deacon authored
Single-step traps to userspace (e.g. via ptrace) are expected to use the TRAP_TRACE for the si_code field of the siginfo, as opposed to TRAP_HWBRPT that we report currently. Fix the reported value, which has no effect on existing and legacy builds of GDB. Reported-by:
Yao Qi <yao.qi@arm.com> Signed-off-by:
-
Ard Biesheuvel authored
Now that the only remaining occurrences of the use of callee saved registers are on the primary boot path, add a comment to the code which register is used for what. Reviewed-by:
-
Ard Biesheuvel authored
Instead of stashing the value of the link register in x28 before setting up the stack and calling into C code, create an ordinary PCS compatible stack frame so that we can push the return address onto the stack. Since exception handlers require a stack as well, assign the stack pointer register before installing the vector table. Note that this accounts for the difference between THREAD_START_SP and THREAD_SIZE, given that the stack pointer is always decremented before calling into any C code. Reviewed-by:
-
Ard Biesheuvel authored
Keeping __PHYS_OFFSET in x24 is actually less clear than simply taking the value of __PHYS_OFFSET using an adrp instruction in the three places that we need it. So change that. Reviewed-by:
-
Ard Biesheuvel authored
Using x27 for passing to __enable_mmu what is essentially the return address makes the code look more complicated than it needs to be. So switch to x30/lr, and update the secondary and cpu_resume call sites to simply call __enable_mmu as an ordinary function, with a bl instruction. This requires the callers to be covered by .idmap.text. Reviewed-by:
-
Ard Biesheuvel authored
The KASLR processing is only used by the primary boot path, and complements the processing that takes place in __primary_switch(). Move the two parts together, to make the code easier to understand. Also, fix up a minor whitespace issue. Reviewed-by:
-
Ard Biesheuvel authored
The function el2_setup() passes its return value in register w20, and in the two cases where the caller actually cares about this return value, it is passed into set_cpu_boot_mode_flag() [almost] directly, which expects its input in w20 as well. So there is no reason to use a 'special' callee saved register here, but we can simply follow the PCS for return value and first argument, respectively. Reviewed-by:
-
Ard Biesheuvel authored
This fixes a number of style issues in sleep.S. No functional changes are intended: - replace absolute literal references with relative references in __cpu_suspend_enter(), which executes from its virtual address - replace explicit lr assignment plus branch with bl in cpu_resume(), which aligns it with stext() and secondary_startup() - don't export _cpu_resume() - use adr_l for mpidr_hash reference, and fix the incorrect accompanying comment, which has been out of date since commit cabe1c81 ("arm64: Change cpu_resume() to enable mmu early then access sleep_sp by va") - replace leading spaces with tabs, and add a bit of whitespace for readability Reviewed-by:
-
- 01 Sep, 2016 2 commits
-
-
Vladimir Murzin authored
Commit e19a6ee2 ("arm64: kernel: Save and restore UAO and addr_limit on exception entry") states that exception handler inherits the original PSTATE.UAO value, so UAO needes to be reset explicitly. However, ARM 8.2 Extension documentation says: PSTATE.UAO is copied to SPSR_ELx.UAO and is then set to 0 on an exception taken from AArch64 to AArch64 so hardware already does the right thing. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Acked-by:
-
Will Deacon authored
The arm64 debug monitor initialisation code uses a CPU hotplug notifier to clear the OS lock when CPUs come online. This patch converts the code to the new hotplug mechanism. Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
