- 01 Feb, 2021 32 commits
-
-
Pavel Begunkov authored
We grab a task for each request and while putting it it also have to do extra work like inflight accounting and waking up that task. This sequence is duplicated several time, it's good time to add a helper. More to that, the helper generates better code due to better locality and so not failing alias analysis. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
For SQPOLL io_uring we want to have only one file note held by sqo_task. Add a warning to make sure it holds. It's deep in io_uring_add_task_file() out of hot path, so shouldn't hurt. Signed-off-by:
-
Yejune Deng authored
The function io_remove_personalities() is very similar to io_unregister_personality(),so implement io_remove_personalities() calling io_unregister_personality(). Signed-off-by:
Yejune Deng <yejune.deng@gmail.com> Reviewed-by:
-
Jens Axboe authored
It's no longer used as IORING_OP_CLOSE got rid for the need of flagging it as uncancelable, kill it of. Signed-off-by: -
Jens Axboe authored
We currently split the close into two, in case we have a ->flush op that we can't safely handle from non-blocking context. This requires us to flag the op as uncancelable if we do need to punt it async, and that means special handling for just this op type. Use __close_fd_get_file() and grab the files lock so we can get the file and check if we need to go async in one atomic operation. That gets rid of the need for splitting this into two steps, and hence the need for IO_WQ_WORK_NO_CANCEL. Signed-off-by: -
Jens Axboe authored
Assumes current->files->file_lock is already held on invocation. Helps the caller check the file before removing the fd, if it needs to. Signed-off-by: -
Pavel Begunkov authored
When a request is completed with comp_state, its completion reference put is deferred to io_submit_flush_completions(), but the submission is put not far from there, so do it together to save one atomic dec per request. That targets requests that complete inline, e.g. buffered rw, send/recv. Proper benchmarking haven't been conducted but for nops(batch=32) it was around 7901 vs 8117 KIOPS (~2.7%), or ~4% per perf profiling. Signed-off-by:
-
Pavel Begunkov authored
io_submit_flush_completions() is called down the stack in the _state version of io_req_complete(), that's ok because is only called by io_uring opcode handler functions directly. Move it up to __io_queue_sqe() as preparation. Signed-off-by:
-
Pavel Begunkov authored
__io_req_complete() inlining is a bit weird, some compilers don't optimise out the non-NULL branch of it even when called as io_req_complete(). Help it a bit by extracting state and stateless helpers out of __io_req_complete(). Signed-off-by:
-
Pavel Begunkov authored
Deduplicates translation of timeout flags into hrtimer_mode. Signed-off-by:
-
Pavel Begunkov authored
When io_req_task_work_add() fails, the request will be cancelled by enqueueing via task_works of io-wq. Extract a function for that. Signed-off-by:
-
Pavel Begunkov authored
The check in io_state_file_put() is optimised pretty well when called from __io_file_get(). Don't pollute the code with all these variants. Signed-off-by:
-
Pavel Begunkov authored
Get rid of a label in io_alloc_req(), it's cleaner to do return directly. Signed-off-by:
-
Pavel Begunkov authored
Apparently, there is one more place hand coded calculation of number of CQ events in the ring. Use __io_cqring_events() helper in io_get_cqring() as well. Naturally, assembly stays identical. Signed-off-by:
-
Pavel Begunkov authored
Inline it in its only user, that's cleaner Signed-off-by:
-
Pavel Begunkov authored
The name is confusing and it's used only in one place. Signed-off-by:
-
Pavel Begunkov authored
personality_idr is usually synchronised by uring_lock, the exception would be removing personalities in io_ring_ctx_wait_and_kill(), which is legit as refs are killed by that point but still would be more resilient to do it under the lock. Signed-off-by:
-
Pavel Begunkov authored
It's awkward to pass return a value into a function for it to return it back. Check it at the caller site and clean up io_resubmit_prep() a bit. Signed-off-by:
-
Pavel Begunkov authored
The hot path is IO completing on the first try. Reshuffle io_rw_reissue() so it's checked first. Signed-off-by:
-
Bijan Mottahedeh authored
Make the percpu ref release function names consistent between rsrc data and nodes. Signed-off-by:
Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by:
-
Bijan Mottahedeh authored
Create common alloc/free fixed_rsrc_data routines for both files and buffers. Reviewed-by:
-
Bijan Mottahedeh authored
Create common routines to be used for both files/buffers registration. [remove io_sqe_rsrc_set_node substitution] Reviewed-by:
-
Pavel Begunkov authored
A simple prep patch allowing to set refnode callbacks after it was allocated. This needed to 1) keep ourself off of hi-level functions where it's not pretty and they are not necessary 2) amortise ref_node allocation in the future, e.g. for updates. Signed-off-by:
-
Bijan Mottahedeh authored
Split alloc_fixed_file_ref_node into resource generic/specific parts, to be leveraged for fixed buffers. Signed-off-by:
-
Bijan Mottahedeh authored
Encapsulate resource reference locking into separate routines. Signed-off-by:
-
Bijan Mottahedeh authored
Uplevel ref_list and make it common to all resources. This is to allow one common ref_list to be used for both files, and buffers in upcoming patches. Signed-off-by:
-
Bijan Mottahedeh authored
Generalize io_queue_rsrc_removal to handle both files and buffers. Reviewed-by:
-
Bijan Mottahedeh authored
This is a prep rename patch for subsequent patches to generalize file registration. [io_uring_rsrc_update:: rename fds -> data] Reviewed-by:
-
Bijan Mottahedeh authored
Move allocation of buffer management structures, and validation of buffers into separate routines. Reviewed-by:
-
Bijan Mottahedeh authored
Split io_sqe_buffer_register into two routines: - io_sqe_buffer_register() registers a single buffer - io_sqe_buffers_register iterates over all user specified buffers Reviewed-by:
-
Jens Axboe authored
Instead of being pessimistic and assume that path lookup will block, use LOOKUP_CACHED to attempt just a cached lookup. This ensures that the fast path is always done inline, and we only punt to async context if IO is needed to satisfy the lookup. For forced nonblock open attempts, mark the file O_NONBLOCK over the actual ->open() call as well. We can safely clear this again before doing fd_install(), so it'll never be user visible that we fiddled with it. This greatly improves the performance of file open where the dentry is already cached: ached 5.10-git 5.10-git+LOOKUP_CACHED Speedup --------------------------------------------------------------- 33% 1,014,975 900,474 1.1x 89% 545,466 292,937 1.9x 100% 435,636 151,475 2.9x The more cache hot we are, the faster the inline LOOKUP_CACHED optimization helps. This is unsurprising and expected, as a thread offload becomes a more dominant part of the total overhead. If we look at io_uring tracing, doing an IORING_OP_OPENAT on a file that isn't in the dentry cache will yield: 275.550481: io_uring_create: ring 00000000ddda6278, fd 3 sq size 8, cq size 16, flags 0 275.550491: io_uring_submit_sqe: ring 00000000ddda6278, op 18, data 0x0, non block 1, sq_thread 0 275.550498: io_uring_queue_async_work: ring 00000000ddda6278, request 00000000c0267d17, flags 69760, normal queue, work 000000003d683991 275.550502: io_uring_cqring_wait: ring 00000000ddda6278, min_events 1 275.550556: io_uring_complete: ring 00000000ddda6278, user_data 0x0, result 4 which shows a failed nonblock lookup, then punt to worker, and then we complete with fd == 4. This takes 65 usec in total. Re-running the same test case again: 281.253956: io_uring_create: ring 0000000008207252, fd 3 sq size 8, cq size 16, flags 0 281.253967: io_uring_submit_sqe: ring 0000000008207252, op 18, data 0x0, non block 1, sq_thread 0 281.253973: io_uring_complete: ring 0000000008207252, user_data 0x0, result 4 shows the same request completing inline, also returning fd == 4. This takes 6 usec. Signed-off-by: -
Jens Axboe authored
Merge branch 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into for-5.12/io_uring Merge RESOLVE_CACHED bits from Al, as the io_uring changes will build on top of that. * 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED fs: add support for LOOKUP_CACHED saner calling conventions for unlazy_child() fs: make unlazy_walk() error handling consistent fs/namei.c: Remove unlikely of status being -ECHILD in lookup_fast() do_tmpfile(): don't mess with finish_open()
-
- 31 Jan, 2021 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Borislav Petkov: "A single fix from Lukas: handle boolean device properties imported from Apple firmware correctly" * tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/apple-properties: Reinstate support for boolean properties
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: "A single fix for objtool to generate proper unwind info for newer toolchains which do not generate section symbols anymore. And a cleanup ontop. This was originally going to go during the next merge window but people can already trigger a build error with binutils-2.36 which doesn't emit section symbols - something which objtool relies on - so let's expedite it" * tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument x86/entry: Emit a symbol for register restoring thunk
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A fix for handling advertised, but non-existent 146818 RTCs correctly. With the recent UIP handling changes the time readout of non-existent RTCs hangs forever as the read returns always 0xFF which means the UIP bit is set. Sanity check the RTC before registering by checking the RTC_VALID register for correctness" * tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtc: mc146818: Detect and handle broken RTCs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull single stepping fix from Thomas Gleixner: "A single fix for the single step reporting regression caused by getting the condition wrong when moving SYSCALL_EMU away from TIF flags" [ There's apparently another problem too, fix pending ] * tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Unbreak single step reporting behaviour
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "One fix for a bug in our soft interrupt masking, which could lead to interrupt replaying recursing, causing spurious interrupts. Thanks to Nicholas Piggin" * tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fix from Wolfram Sang: "Just one I2C driver update this time" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mediatek: Move suspend and resume handling to NOIRQ phase
-
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-ledsLinus Torvalds authored
Pull LED fixes from Pavel Machek: "This pull is due to 'leds: trigger: fix potential deadlock with libata' -- people find the warn annoying. It also contains new driver and two trivial fixes" * 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: rt8515: Add Richtek RT8515 LED driver dt-bindings: leds: Add DT binding for Richtek RT8515 leds: trigger: fix potential deadlock with libata leds: leds-ariel: convert comma to semicolon leds: leds-lm3533: convert comma to semicolon
-
