- 22 Jan, 2016 2 commits
-
-
Kuninori Morimoto authored
Current ADG doesn't use rsnd_mod_init(), but this limitation is no longer necessary. Let's use common rsnd_mod_init() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 06 Jan, 2016 1 commit
-
-
Dan Carpenter authored
The bitwise OR has higher precedence than ?: so the val2 was always set to 0x2. Fixes: b4c83b17 ('ASoC: rsnd: add Multi channel support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 30 Dec, 2015 1 commit
-
-
Andrzej Hajda authored
Field usrcnt is unsigned so it cannot be lesser than zero. The patch fixes the check, moves it to the beginning of the function and changes return value to -EIO in case of usercnt error. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 22 Dec, 2015 1 commit
-
-
Kuninori Morimoto authored
This patch adds Multi channel support on Renesas R-Car sound. This patch is tested on Salvator-X board, but it can't use Multi channel, because supported format is different between codec chip and R-Car. Thus, it was tested on board which doesn't mount codec chip, with oscilloscope. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 18 Dec, 2015 11 commits
-
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Current rsnd driver is using complex macro to parse DAI connection. This patch adds new rsnd_parse_connect_common() and replace current macro to it. This is prepare for multi channel support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
TDM will use 6 or 8 slots on 1 SSI, and Multi channel will use 6 or 8 slots on few SSI (each SSI uses 2 slots). Thus, this adds new slot control functions which can be prepare for Multi channel support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
rsnd_get_slot_rdai() returns total slots (it returns 6 if total 6 channels) , and rsnd_get_slot_extend() returns extended SSI width (it returns 8 if total 6 channels). This will be used on SSI multi channel support too (It will return 2 if total 6 channels with 3 SSI). But, it is using confusable naming. This patch changes rsnd_get_slot_rdai() -> rsnd_get_slot(), rsnd_get_slot_extend() -> rsnd_get_slot_width() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Current Renesas sound driver is using rsnd_get_slot_runtime(), but it is same as runtime->channels. This patch removes rsnd_get_slot_runtime() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Current SSI/SSIU are using rsnd_get_slot_runtime() to check TDM, but using rsnd_get_slot_extend() is more sane. This patch fix it up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
It can't output corrent dma name *before* rsnd_mod_init(). It goes to *after* rsnd_mod_init() by this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Renesas sound driver has rsnd_get_adinr_bit/chan() functions. It is assuming _bit() returns ADINR :: OTBL, and _chan() returns ADINR :: CHNUM. Current _bit() returns both OTBL and CHNUM. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
SSIU should be controlled after SSI. This patch fix up it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 17 Dec, 2015 3 commits
-
-
Kuninori Morimoto authored
rsrc-card is DPCM supported version of simple-card. Thus it has similar DT format. OTOH, snd_soc_dai_link requests cpu/codec, but one of them will be snd-soc-dummy in DPCM case, and DPCM requests frontend/backend dai_link. This means it might have multi backend/codec. And, SND_SOC_DAIFMT_xxx is based on "codec". Because of these difference, current rsrc card can't detect correct dai_fmt. This patch detect correct dai fmt from 1st "codec". Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
1efb53a2 ("ASoC: simple-card: Remove support for setting differing DAI formats") removed set_fmt support from simple-card. rsrc-card follows same style, because it is based on simple-card. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Renesas sound driver will use tdm slot on TDM Multi Mode support. This patch enables tdm slot on rsrc card driver on DT. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 15 Dec, 2015 3 commits
-
-
Mark Brown authored
We use ret as the return value from the rsnd_mix_probe() but if there are no child nodes and no errors then we will never initialize ret leading to build warnings. Ensure ret is initialized before we iterate over the child nodes to avoid this. Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
We use ret as the return value from the rsnd_dvc_probe() but if there are no child nodes and no errors then we will never initialize ret leading to build warnings. Ensure ret is initialized before we iterate over the child nodes to avoid this. Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
We use ret as the return value from the rsnd_ctu_probe() but if there are no child nodes and no errors then we will never initialize ret leading to build warnings. Ensure ret is initialized before we iterate over the child nodes to avoid this. Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 08 Dec, 2015 1 commit
-
-
Kuninori Morimoto authored
L/R channel data has been treated as inverted on R-Car sound 16bit mode, Thus, 4689032b("ASoC: rsnd: tidyup data align position") tidyuped data align position. But it couldn't care about capture case. This patch cares both playback/capture Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 02 Dec, 2015 1 commit
-
-
Kuninori Morimoto authored
SSICR::SWSP bit controls WS signal low/high, but in case of TDM it is inverted. This patch solves this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 01 Dec, 2015 2 commits
-
-
Kuninori Morimoto authored
This patch adds missing check of snd_soc_of_get_dai_name(). It might not be able to use sound card, because it might returns -EPROBE_DEFER. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
drv pointer should be "base + offset" instead of "current + offset". This patch fixup this issue, otherwise third and subsequent pointer will be broken Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 30 Nov, 2015 14 commits
-
-
Kuninori Morimoto authored
Renesas R-Car can out TDM by 1) 6ch x 1 DAI as TDM Extend Mode 2) 2ch x 4 x 1 DAI as TDM split Mode 3) 2ch x 3 DAI or 2ch x 4 DAI as TDM Multichannel Mode This patch adds 1) TDM Extend Mode. Because of HW design, this 6ch data will be outputed via 8ch data width. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Current DVC is assuming that the sound is always stereo. This patch makes it more flexible Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Current SSI is assuming that the sound is always stereo. But, SSI needs to calculate its frequency when master mode. Then This frequency depends on each SSI's slots, and TDM mode (= TDM Extend Mode, TDM split Mode, TDM Multichannel Mode). This patch enables to use non-stereo sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
It will have TDM settings on SSIWSR. Actually, we would like to set it on rsnd_ssi_config_init(), but we can't. Because SSI might be used as clock master (It doesn't need to call rsnd_ssi_config_init() when clock master mode). This patch adds new ssi->wsr and set it on rsnd_ssi_start(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
In order to enhance code readability, this patch adds rsnd_ssi_config_init() and moves SSICR register settings to it. This is prepare patch for TDM support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Based on datasheet process Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Based on datasheet process Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Based on datasheet process Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Based on datasheet naming Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Based on datasheet naming Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Based on datasheet naming Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
SRC_BUSIF_MODE has both IN/OUT register. Current src driver sets IN register only. This patch sets missing OUT register. IN/OUT register are using default setting, so, there is no HW effect. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
DVC/SRC/SSIU needs ADINR::CHNUM settings too. This patch adds these missing value. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
adg.c is used from ssi/src/cmd. Thus don't use confusable *mod here. This patch rename it to ssi_mod/src_mod/cmd_mod Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-