Static analysis Coverity had detected a potential array out-of-bounds
write issue due to the fact that MAX AFE port Id was set to 16 instead
of using AFE_PORT_MAX macro.

Fix this by properly using AFE_PORT_MAX macro.

Fixes: aa2e2785 ("ASoC: qcom: sm8250: add sound card qrb5165-rb5 support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201028142001.22431-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "Add documentation and machine driver for SC7180 sound card" from Cheng-Yi Chiang <cychiang@chromium.org>:

Note:
- The machine driver patch is made by the collaboration of
  Cheng-Yi Chiang <cychiang@chromium.org>
  Rohit kumar <rohitkr@codeaurora.org>
  Ajit Pandey <ajitp@codeaurora.org>
  But Ajit has left codeaurora.

Changes from v1 to v2:
- Ducumentation: Addressed all suggestions from Doug.
- Machine driver:
  - Fix comment style for license.
  - Sort includes.
  - Remove sc7180_snd_hw_params.
  - Remove sc7180_dai_init and use aux device instead for headset jack registration.
  - Statically define format for Primary MI2S.
  - Atomic is not a concern because there is mutex in card to make sure
    startup and shutdown happen sequentially.
  - Fix missing return -EINVAL in startup.
  - Use static sound card.
  - Use devm_kzalloc to avoid kfree.

Changes from v2 to v3:
- Ducumentation: Addressed suggestions from Srini.
- Machine driver:
  - Reuse qcom_snd_parse_of to parse properties.
  - Remove playback-only and capture-only.
  - Misc fixes to address comments.

Changes from v3 to v4:
- Ducumentation: Addressed suggestions from Rob.
 - Remove definition of dai.
 - Use 'sound-dai: true' for sound-dai schema.
 - Add reg property to pass 'make dt_binding_check' check although reg is not used in the driver.
- Machine driver:
 - Add Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>

Changes from v4 to v5:
- Documentation: Addressed suggestions from Rob.
 - Add definition for "#address-cells" and "#size-cells".
 - Add additionalProperties: false
 - Add required properties.

Changes from v5 to v6:
- Documentation: Addressed suggestions from Rob.
 - Drop contains in compatible strings.
 - Only allow dai-link@[0-9]
 - Remove reg ref since it has a type definition already.

Changes from v6 to v7
- Documentation:
  - Add headset-jack and hdmi-jack to specify the codec
    responsible for jack detection.
- HDMI codec driver:
  - Use component set_jack ops instead of exporting hdmi_codec_set_jack_detect.
- Machine driver:
  - Removed aux device following Stephan's suggestion.
  - Use headset-jack and hdmi-jack to specify the codec
    responsible for jack detection.
  - Add support for HDMI(actually DP) playback.

Changes from v7 to v8
- Documentation:
  - Remove headset-jack and hdmi-jack.
- Machine driver:
  - Let machine driver decide whether there is a jack on the DAI.

Changes from v8 to v9
- hdmi-codec driver:
  - Fixed the naming.
- Machine driver:
  - Fixed unused fields.
  - Moved snd_soc_card_set_drvdata
  - Keep the naming of HDMI as dai name until v5 of lpass-hdmi patches.

Changes from v9 to v10
- Documentation:
  - Let compatible string be more specific for board configuration to allow
    for future changes.
- Machine driver:
  - Fixed unused include and macro.
  - Add temporary macro SC7180_LPASS_DP for future change in sc7180-lpass.h.
  - Let sound card be dynamically allocated.
  - Change compatible string accordingly.

Changes from v10 to v11
- Machine driver:
  - Use temporary macro LPASS_DP_RX for future change in sc7180-lpass.h.

Changes from v11 to v12
- Documentation:
 - Change the file and title name for new compatible string google,sc7180-trogdor.
 - Change the example of model name.
- Machine driver:
 - Use the definitaion of index LPASS_DP_RX in sc7180-lpass.h.
 - Fix for compatible string.
 - Replace a comma with semicolon.

Ajit Pandey (1):
  ASoC: qcom: sc7180: Add machine driver for sound card registration

Cheng-Yi Chiang (1):
  ASoC: google: dt-bindings: Add sc7180-trogdor machine bindings

 .../bindings/sound/google,sc7180-trogdor.yaml | 130 +++++++++
 sound/soc/qcom/Kconfig                        |  12 +
 sound/soc/qcom/Makefile                       |   2 +
 sound/soc/qcom/sc7180.c                       | 266 ++++++++++++++++++
 4 files changed, 410 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
 create mode 100644 sound/soc/qcom/sc7180.c

--
2.29.0.rc2.309.g374f81d7ae-goog

make use of devm_of_platform_populate to remove some redundant code!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201027111526.12326-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add new driver to register sound card on sc7180 trogdor board and
do the required configuration for lpass cpu dai and external codecs
connected over MI2S interfaces.
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201027032234.1705835-3-cychiang@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add devicetree bindings documentation file for sc7180 sound card.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201027032234.1705835-2-cychiang@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Series with multiple code cleanups, plus one fix to remove
unnecessary kernel warnings related to firmware loading.

Bard Liao (1):
  ASoC: SOF: loader: handle all SOF_IPC_EXT types

Pierre-Louis Bossart (3):
  ASoC: SOF: control: remove const in sizeof()
  ASoC: SOF: topology: remove const in sizeof()
  ASoC: SOF: sof-audio: remove goto used for force-nocodec support

 sound/soc/sof/control.c   | 20 ++++++++++----------
 sound/soc/sof/loader.c    |  5 +++++
 sound/soc/sof/sof-audio.c | 10 +++-------
 sound/soc/sof/topology.c  |  2 +-
 4 files changed, 19 insertions(+), 18 deletions(-)

--
2.27.0

Viorel Suman <viorel.suman@nxp.com>:

From: Viorel Suman <viorel.suman@nxp.com>

DAI driver for new XCVR IP found in i.MX8MP.

Viorel Suman (2):
  ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver
  ASoC: dt-bindings: fsl_xcvr: Add document for XCVR

Changes since v1:
 - improved 6- and 12-ch layout comment
 - used regmap polling function, improved
   clocks handling in runtime_resume
 - added FW size check in FW load function,
   improved IRQ handler, removed dummy IRQ handlers
 - fixed yaml file

Changes since v2:
 - used devm_reset_control_get_exclusive instead of of_reset_control_get
 - moved reset_control_assert into runtime_suspend

Changes since v3:
 - removed "firmware-name" DTS property from both documentation and
   source code by porting it into SoC specific 'compatible' data structure.

 .../devicetree/bindings/sound/fsl,xcvr.yaml   |  104 ++
 sound/soc/fsl/Kconfig                         |   10 +
 sound/soc/fsl/Makefile                        |    2 +
 sound/soc/fsl/fsl_xcvr.c                      | 1359 +++++++++++++++++
 sound/soc/fsl/fsl_xcvr.h                      |  266 ++++
 5 files changed, 1741 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
 create mode 100644 sound/soc/fsl/fsl_xcvr.c
 create mode 100644 sound/soc/fsl/fsl_xcvr.h

--
2.26.2

Merge series "ASoC: merge soc_pcm_hw_param() rollback and soc_pcm_hw_free()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Mark

soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().

	static int soc_pcm_hw_params(xxx)
	{
		...
		if (ret < 0)
			goto xxx_err;
		...
		return ret;

 ^	component_err:
 |		...
 |	interface_err:
(A)		...
 |	codec_err:
 |		...
 v		return ret;
	}

This kind of duplicated code can be a hotbed of bugs,
thus, this patch-set share soc_pcm_hw_free() and rollback.

Kuninori Morimoto (6):
  ASoC: soc.h: remove for_each_rtd_dais_rollback()
  ASoC: soc-pcm: move soc_pcm_hw_free() next to soc_pcm_hw_params()
  ASoC: soc-link: add mark for snd_soc_link_hw_params/free()
  ASoC: soc-component: add mark for snd_soc_pcm_component_hw_params/free()
  ASoC: soc-dai: add mark for snd_soc_dai_hw_params/free()
  ASoC: soc-pcm: add soc_pcm_hw_clean() and call it from soc_pcm_hw_params/free()

 include/sound/soc-component.h |   6 +-
 include/sound/soc-dai.h       |   4 +-
 include/sound/soc-link.h      |   3 +-
 include/sound/soc.h           |   7 +-
 sound/soc/soc-component.c     |  19 ++---
 sound/soc/soc-dai.c           |  13 +++-
 sound/soc/soc-dapm.c          |   4 +-
 sound/soc/soc-link.c          |  12 +++-
 sound/soc/soc-pcm.c           | 131 ++++++++++++++--------------------
 9 files changed, 97 insertions(+), 102 deletions(-)

--
2.25.1

Merge series "ASoC: qcom: add support for QRB5165 RB5 machine" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

This patchset adds support to Qualcomm Robotics RB5 Development Kit based on
QRB5165 Robotics SoC. This board has 2 WSA881X smart speakers with onboard
DMIC connected to internal LPASS codec via WSA and VA macros respectively.

Srinivas Kandagatla (2):
  ASoC: qcom: dt-bindings: Add SM8250 sound card bindings
  ASoC: qcom: sm8250: add sound card qrb5165-rb5 support

 .../bindings/sound/qcom,sm8250.yaml           | 161 +++++++++++++
 sound/soc/qcom/Kconfig                        |  11 +
 sound/soc/qcom/Makefile                       |   2 +
 sound/soc/qcom/sm8250.c                       | 228 ++++++++++++++++++
 4 files changed, 402 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
 create mode 100644 sound/soc/qcom/sm8250.c

--
2.21.0

Merge series "use semicolons rather than commas to separate statements" from Julia Lawall <Julia.Lawall@inria.fr>:

These patches replace commas by semicolons.  This was done using the
Coccinelle semantic patch (http://coccinelle.lip6.fr/) shown below.

This semantic patch ensures that commas inside for loop headers will not be
transformed.  It also doesn't touch macro definitions.

Coccinelle ensures that braces are added as needed when a single-statement
branch turns into a multi-statement one.

This semantic patch has a few false positives, for variable delcarations
such as:

LIST_HEAD(x), *y;

The semantic patch could be improved to avoid these, but for the moment
they have been removed manually (2 occurrences).

// <smpl>
@initialize:ocaml@
@@

let infunction p =
  (* avoid macros *)
  (List.hd p).current_element <> "something_else"

let combined p1 p2 =
  (List.hd p1).line_end = (List.hd p2).line ||
  (((List.hd p1).line_end < (List.hd p2).line) &&
   ((List.hd p1).col < (List.hd p2).col))

@bad@
statement S;
declaration d;
position p;
@@

S@p
d

// special cases where newlines are needed (hope for no more than 5)
@@
expression e1,e2;
statement S;
position p != bad.p;
position p1;
position p2 :
    script:ocaml(p1) { infunction p1 && combined p1 p2 };
@@

- e1@p1,@S@p e2@p2;
+ e1; e2;

@@
expression e1,e2;
statement S;
position p != bad.p;
position p1;
position p2 :
    script:ocaml(p1) { infunction p1 && combined p1 p2 };
@@

- e1@p1,@S@p e2@p2;
+ e1; e2;

@@
expression e1,e2;
statement S;
position p != bad.p;
position p1;
position p2 :
    script:ocaml(p1) { infunction p1 && combined p1 p2 };
@@

- e1@p1,@S@p e2@p2;
+ e1; e2;

@@
expression e1,e2;
statement S;
position p != bad.p;
position p1;
position p2 :
    script:ocaml(p1) { infunction p1 && combined p1 p2 };
@@

- e1@p1,@S@p e2@p2;
+ e1; e2;

@@
expression e1,e2;
statement S;
position p != bad.p;
position p1;
position p2 :
    script:ocaml(p1) { infunction p1 && combined p1 p2 };
@@

- e1@p1,@S@p e2@p2;
+ e1; e2;

@r@
expression e1,e2;
statement S;
position p != bad.p;
@@

e1 ,@S@p e2;

@@
expression e1,e2;
position p1;
position p2 :
    script:ocaml(p1) { infunction p1 && not(combined p1 p2) };
statement S;
position r.p;
@@

e1@p1
-,@S@p
+;
e2@p2
... when any
// </smpl>

---

 sound/firewire/fireworks/fireworks_pcm.c |    2 +-
 sound/pci/hda/patch_ca0132.c             |    2 +-
 sound/pci/hda/patch_hdmi.c               |    2 +-
 sound/soc/codecs/madera.c                |    4 ++--
 sound/soc/codecs/wm8350.c                |    3 ++-
 sound/soc/intel/boards/bytcr_rt5651.c    |    2 +-
 sound/soc/samsung/snow.c                 |    2 +-
 sound/soc/soc-dapm.c                     |    2 +-
 sound/soc/sof/intel/hda-dsp.c            |    2 +-
 9 files changed, 11 insertions(+), 10 deletions(-)

Merge series "ASoC: sun8i-codec: support for AIF2 and AIF3" from Samuel Holland <samuel@sholland.org>:

This series adds support the other two AIFs present in the sun8i codec,
which can be used for codec2codec DAI links.

This series first fills out the DAI driver, removing assumptions that
were made for AIF1 (16 bits, 2 channels, certain clock inversions). Some
new logic is required to handle 3 DAIs and the ADC/DAC sharing the same
clock. Finally, it adds the new DAIs, and hooks them up with DAPM
widgets and routes per the hardware topology.

To minimize the number of patches in this series, related device tree
patches (increasing #sound-dai-cells, adding new DAI links) will be sent
separately.

Changes from v1:
  - Patches 1-8 from v1 (DAPM changes) were merged
  - Prefixed AIF constants with "SUN8I_CODEC_" [1, 7, 10, 16, 17]
  - Renamed variables in sun8i_codec_set_fmt for clarity [3]
  - Update sysclk->sysclk_rate if later calls to hw_params change the
    sample rate (thanks Chen-Yu for reminding me of this) [11]
  - Select COMMON_CLK for clk_set_rate_exclusive [12]
  - Add comments and hopefully clarify the clock protection logic [12]
  - Make the error message more concise and put it on one line [12]
  - Drop the "reg" variable holding SUN8I_AIF_CLK_CTRL(dai->id) [15]
  - Rename "div_reg" to "clk_reg" and adjust comments for clarity [17]
  - Improve the AIF2/AIF3 rate mismatch error message [17]
  - Minor grammar/wording fixes in commit messages [2, 4, 7, 8, 16, 17]
  - Added Maxime's Acked-by: [1-2, 4-9, 11, 13-14, 16]

Samuel Holland (17):
  ASoC: sun8i-codec: Prepare to extend the DAI driver
  ASoC: sun8i-codec: Program DAI format before clock inversion
  ASoC: sun8i-codec: Enable all supported clock inversions
  ASoC: sun8i-codec: Use the provided word size
  ASoC: sun8i-codec: Round up the LRCK divisor
  ASoC: sun8i-codec: Correct the BCLK divisor calculation
  ASoC: sun8i-codec: Support the TDM slot binding
  ASoC: sun8i-codec: Enforce symmetric DAI parameters
  ASoC: sun8i-codec: Enable all supported sample rates
  ASoC: sun8i-codec: Automatically set the system sample rate
  ASoC: sun8i-codec: Constrain to compatible sample rates
  ASoC: sun8i-codec: Protect the clock rate while streams are open
  ASoC: sun8i-codec: Require an exact BCLK divisor match
  ASoC: sun8i-codec: Enable all supported PCM formats
  ASoC: sun8i-codec: Generalize AIF clock control
  ASoC: sun8i-codec: Add the AIF2 DAI, widgets, and routes
  ASoC: sun8i-codec: Add the AIF3 DAI, widgets, and routes

 sound/soc/sunxi/Kconfig       |   1 +
 sound/soc/sunxi/sun8i-codec.c | 834 ++++++++++++++++++++++++++++------
 2 files changed, 699 insertions(+), 136 deletions(-)

--
2.26.2

Merge series "dt-bindings: stm32: convert audio dfsdm to json-schema" from Olivier Moysan <olivier.moysan@st.com>:

Some audio properties documented in st,stm32-adfsdm.txt are already documented
in Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml bindings.
Move remaining properties from st,stm32-adfsdm.txt to st,stm32-dfsdm-adc.yaml,
and remove st,stm32-adfsdm.txt.

Changes in v2:
- Complete st,stm32-dfsdm-adc.yaml rather than converting st,stm32-adfsdm.txt

Olivier Moysan (2):
  dt-bindings: stm32: dfsdm: update audio properties
  dt-bindings: stm32: dfsdm: remove stm32-adfsdm.txt binding

 .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml  |  7 ++-
 .../bindings/sound/st,stm32-adfsdm.txt        | 63 -------------------
 2 files changed, 5 insertions(+), 65 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt

--
2.17.1

Add 88200Hz and 176400Hz sample rates support for TX.
Add 88200Hz, 176400Hz, 192000Hz sample rates support for RX.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/1602557360-18795-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

On i.MX8QM, there are separate interrupts for TX and RX.

As the EDMA can't be configured to swing back to first FIFO
after writing the second FIFO, so we need to force the burst
size to be 2 on i.MX8QM. And EDMA don't support to shift
the data from S24_LE to S16_LE, so the supported TX format
is also different on i.MX8QM.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1602739728-4433-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add new compatible string "fsl,imx8qm-spdif" for supporting spdif
module on i.MX8QM.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1602739728-4433-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

ACP supports different audio configurations other than I2S.
This patch will fix acp driver probe failure for other audio
configurations.
Tested-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/1603476441-3506-1-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Replace the two-step copy-and-convert in
wm5102_out_comp_coeff_put() with get_unaligned_be16(). Apart from
looking nicer, it avoids this sparse warning:

wm5102.c:687:35: sparse: sparse: cast to restricted __be16
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201015102703.24622-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the STM32 SAI bindings to DT schema format using json-schema.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201009141051.27365-1-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

The change removes the platform_data include/definition. It only contains
some values for the MICBIAS.
These are moved into 'dt-bindings/sound/adi,adau1977.h' so that they can be
used inside device-trees. When moving then, they need to be converted to
pre-compiler defines, so that the DT compiler can understand them.

The driver then, also needs to include the new
'dt-bindings/sound/adi,adau1977.h' file.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201019105313.24862-1-alexandru.ardelean@analog.comSigned-off-by: Mark Brown <broonie@kernel.org>

The TI PCM5102A codec driver can be used with the generic sound card
drivers, so it should be selectable. For example, with the addition
of #sound-dai-cells = <0> property in DT, it can be used with simple/graph
card drivers.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201012141911.3150996-1-codrin.ciubotariu@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

All platforms that use the jz4740-i2s driver have been switched to
devicetree for a while now and the assignment of the DMA peripheral ID
is done in the devicetree.

It is no longer necessary to manually assign the peripheral ID in the
driver, so remove that. The DMA driver does not even look at the value
assigned in the driver anymore and always uses the value provided by the
devicetree.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201023092346.5777-1-lars@metafoo.deSigned-off-by: Mark Brown <broonie@kernel.org>

Add support to Qualcomm Robotics RB5 Development Kit based on
QRB5165 Robotics SoC. This board has 2 WSA881X smart speakers
with onboard DMIC connected to internal LPASS codec via WSA
and VA macros respectively.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201026170947.10567-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds bindings required for SM8250 based soundcards
for example Qualcomm Robotics RB5 Development Kit which makes
use of ADSP and Internal LPASS codec.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201026170947.10567-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Device tree audio configuration for STM32 DFSDM is already
covered in the following binding:
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
Remove stm32-adfsdm.txt obsolete binding.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201020155709.2621-3-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

- Add missing compatible property in audio node.
- Remove obsolete "st,stm32-dfsdm-pdm" compatible.
- Remove useless comment in adc io-channels description.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201020155709.2621-2-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().

	static int soc_pcm_hw_params(xxx)
	{
		...
		if (ret < 0)
			goto xxx_err;
		...
		return ret;

 ^	component_err:
 |		...
 |	interface_err:
(A)		...
 |	codec_err:
 |		...
 v		return ret;
	}

The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback          is for succeeded part only.

This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.

Now, soc_pcm_hw_params/free() are handling
	1) snd_soc_link_hw_params/free()
	2) snd_soc_pcm_component_hw_params/free()
	3) snd_soc_dai_hw_params/free()

Now, 1) to 3) are handled.
This patch adds new soc_pcm_hw_clean() and call it from
soc_pcm_hw_params() as rollback, and from soc_pcm_hw_free() as
normal close handler.

Other difference is that soc_pcm_hw_free() handles digital mute
if it was last user. Rollback also handles it by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7rhgqab.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().

	static int soc_pcm_hw_params(xxx)
	{
		...
		if (ret < 0)
			goto xxx_err;
		...
		return ret;

 ^	component_err:
 |		...
 |	interface_err:
(A)		...
 |	codec_err:
 |		...
 v		return ret;
	}

The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback          is for succeeded part only.

This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.

Now, soc_pcm_hw_params/free() are handling
	1) snd_soc_link_hw_params/free()
	2) snd_soc_pcm_component_hw_params/free()
=>	3) snd_soc_dai_hw_params/free()

This patch is for 3) snd_soc_dai_hw_params/free().

The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.

To avoid such case, this patch marks substream pointer when hw_params() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.

One note here is that it cares *previous* hw_params() only now,
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imbxgqai.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().

	static int soc_pcm_hw_params(xxx)
	{
		...
		if (ret < 0)
			goto xxx_err;
		...
		return ret;

 ^	component_err:
 |		...
 |	interface_err:
(A)		...
 |	codec_err:
 |		...
 v		return ret;
	}

The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback          is for succeeded part only.

This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.

Now, soc_pcm_hw_params/free() are handling
	1) snd_soc_link_hw_params/free()
=>	2) snd_soc_pcm_component_hw_params/free()
	3) snd_soc_dai_hw_params/free()

This patch is for 2) snd_soc_pcm_component_hw_params/free().

The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.

To avoid such case, this patch marks substream pointer when hw_params() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.

One note here is that it cares *previous* hw_params() only now,
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0wdgqav.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

soc_pcm_hw_params() does rollback when failed (A),
but, it is almost same as soc_pcm_hw_free().

	static int soc_pcm_hw_params(xxx)
	{
		...
		if (ret < 0)
			goto xxx_err;
		...
		return ret;

 ^	component_err:
 |		...
 |	interface_err:
(A)		...
 |	codec_err:
 |		...
 v		return ret;
	}

The difference is
soc_pcm_hw_free() is for all dai/component/substream,
rollback          is for succeeded part only.

This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_hw_free() and rollback.

Now, soc_pcm_hw_params/free() are handling
=>	1) snd_soc_link_hw_params/free()
	2) snd_soc_pcm_component_hw_params/free()
	3) snd_soc_dai_hw_params/free()

This patch is for 1) snd_soc_link_hw_params/free().

The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.

To avoid such case, this patch marks substream pointer when hw_params() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.

One note here ist that it cares *previous* hw_params() only now,
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfgtgqba.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch moves soc_pcm_hw_free() next to soc_pcm_hw_params().
This is prepare for soc_pcm_hw_params() cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mu19gqbh.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

commit 140a4532 ("ASoC: soc-pcm: add soc_pcm_clean() and call it
from soc_pcm_open/close()") uses soc_pcm_clean() and then
for_each_rtd_dais_rollback() is no longer used.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8lpgqbp.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Address smatch warnings:
sound/soc/sof/sof-audio.c:375 sof_machine_check() warn: inconsistent indenting
sound/soc/sof/sof-audio.c:380 sof_machine_check() warn: ignoring unreachable code.

No functionality change.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200930152026.3902186-4-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We should only use the type, the const attribute makes no sense in
sizeof().
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200930152026.3902186-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We should only use the type, the const attribute makes no sense in
sizeof().
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200930152026.3902186-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

XCVR (Audio Transceiver) is a new IP module found on i.MX8MP.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201013121733.83684-3-viorel.suman@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

XCVR (Audio Transceiver) is a on-chip functional module found
on i.MX8MP. It support HDMI2.1 eARC, HDMI1.4 ARC and SPDIF.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20201013121733.83684-2-viorel.suman@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Replace commas with semicolons.  What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1602407979-29038-9-git-send-email-Julia.Lawall@inria.frSigned-off-by: Mark Brown <broonie@kernel.org>

Replace commas with semicolons.  What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1602407979-29038-8-git-send-email-Julia.Lawall@inria.frSigned-off-by: Mark Brown <broonie@kernel.org>

Replace commas with semicolons.  What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/1602407979-29038-7-git-send-email-Julia.Lawall@inria.frSigned-off-by: Mark Brown <broonie@kernel.org>

Replace commas with semicolons.  What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1602407979-29038-6-git-send-email-Julia.Lawall@inria.frSigned-off-by: Mark Brown <broonie@kernel.org>