- 18 Sep, 2020 2 commits
-
-
Masami Hiramatsu authored
Since 'perf probe' heavily depends on debuginfo, debuginfod gives us many benefits on the 'perf probe' command on remote machine. Especially, this will be helpful for the embedded devices which will not have enough storage, or boot with a cross-build kernel whose source code is in the host machine. This will work as similar to commit c7a14fdc ("perf build-ids: Fall back to debuginfod query if debuginfo not found") Tested with: (host) $ cd PATH/TO/KBUILD/DIR/ (host) $ debuginfod -F . ... (remote) # perf probe -L vfs_read Failed to find the path for the kernel: No such file or directory Error: Failed to show lines. (remote) # export DEBUGINFOD_URLS="http://$HOST_IP:8002/" (remote) # perf probe -L vfs_read <vfs_read@...> 0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos) { 2 ssize_t ret; if (!(file->f_mode & FMODE_READ)) return -EBADF; 6 if (!(file->f_mode & FMODE_CAN_READ)) return -EINVAL; 8 if (unlikely(!access_ok(buf, count))) return -EFAULT; 11 ret = rw_verify_area(READ, file, pos, count); 12 if (ret) return ret; if (count > MAX_RW_COUNT) ... (remote) # perf probe -a "vfs_read count" Added new event: probe:vfs_read (on vfs_read with count) (remote) # perf probe -l probe:vfs_read (on vfs_read@ksrc/linux/fs/read_write.c with count) Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Frank Ch. Eigler <fche@redhat.com> Cc: Aaron Merey <amerey@redhat.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Link: http://lore.kernel.org/lkml/160041610083.912668.13659563860278615846.stgit@devnote2Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Masami Hiramatsu authored
'perf probe' uses ref_reloc_sym to adjust symbol offset address from debuginfo address or ref_reloc_sym based address, but that is misusing reloc_sym->addr and reloc_sym->unrelocated_addr. If map is not relocated (map->reloc == 0), we can use reloc_sym->addr as unrelocated address instead of reloc_sym->unrelocated_addr. This usually does not happen. If we have a non-stripped ELF binary, we will use it for map and debuginfo, if not, we use only kallsyms without debuginfo. Thus, the map is always relocated (ELF and DWARF binary) or not relocated (kallsyms). However, if we allow the combination of debuginfo and kallsyms based map (like using debuginfod), we have to check the map->reloc and choose the collect address of reloc_sym. Signed-off-by:
-
- 17 Sep, 2020 10 commits
-
-
Adrian Hunter authored
A context_switch event can have no tid because pids can be detached from a task while the task is still running (in do_exit()). Note this won't happen with per-task contexts because then tracing stops at perf_event_exit_task() If a task with no tid gets preempted, or a dying task gets preempted and its parent releases it, when it subsequently gets switched back in, Intel PT will not be able to determine what task is running and prints an error "context_switch event has no tid". However, it is not really an error because the task is in kernel space and the decoder can continue to decode successfully. Fix by changing the error to be only a logged message, and make allowance for tid == -1. Example: Using 5.9-rc4 with Preemptible Kernel (Low-Latency Desktop) e.g. $ uname -r 5.9.0-rc4 $ grep PREEMPT .config # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_COUNT=y CONFIG_PREEMPTION=y CONFIG_PREEMPT_RCU=y CONFIG_PREEMPT_NOTIFIERS=y CONFIG_DRM_I915_PREEMPT_TIMEOUT=640 CONFIG_DEBUG_PREEMPT=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_PREEMPTIRQ_DELAY_TEST is not set Before: $ cat forkit.c #include <sys/types.h> #include <unistd.h> #include <sys/wait.h> int main() { pid_t child; int status = 0; child = fork(); if (child == 0) return 123; wait(&status); return 0; } $ gcc -o forkit forkit.c $ sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k & [1] 11016 $ taskset 2 ./forkit $ sudo pkill perf $ [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 17.262 MB perf.data ] [1]+ Terminated sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit context_switch event has no tid taskset 11019 [001] 66663.270045029: 1 instructions:k: ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms]) taskset 11019 [001] 66663.270201816: 1 instructions:k: ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms]) forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019 forkit 11019 [001] 66663.270420028: 1 instructions:k: ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms]) forkit 11019 [001] 66663.270648704: 1 instructions:k: ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms]) forkit 11019 [001] 66663.270833163: 1 instructions:k: ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms]) forkit 11019 [001] 66663.271092359: 1 instructions:k: ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms]) forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019) forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 11020/11020 forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019 forkit 11020 [001] 66663.271312066: 1 instructions:k: ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms]) forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019) forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11019/11019 forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11020/11020 forkit 11019 [001] 66663.271517241: 1 instructions:k: ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms]) forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386) After: $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit taskset 11019 [001] 66663.270045029: 1 instructions:k: ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms]) taskset 11019 [001] 66663.270201816: 1 instructions:k: ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms]) forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019 forkit 11019 [001] 66663.270420028: 1 instructions:k: ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms]) forkit 11019 [001] 66663.270648704: 1 instructions:k: ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms]) forkit 11019 [001] 66663.270833163: 1 instructions:k: ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms]) forkit 11019 [001] 66663.271092359: 1 instructions:k: ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms]) forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019) forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 11020/11020 forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019 forkit 11020 [001] 66663.271312066: 1 instructions:k: ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms]) forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019) forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11019/11019 forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11020/11020 forkit 11019 [001] 66663.271517241: 1 instructions:k: ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms]) forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386) forkit 11019 [001] 66663.271688752: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: -1/-1 :-1 -1 [001] 66663.271692086: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019 :-1 -1 [001] 66663.271707466: 1 instructions:k: ffffffffb18eb096 update_load_avg+0x306 ([kernel.kallsyms]) Fixes: 86c27869 ("perf intel-pt: Add support for PERF_RECORD_SWITCH") Signed-off-by:Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lore.kernel.org/lkml/20200909084923.9096-3-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
The kernel can release tasks while they are still running. This can result in a task having no tid, in which case perf records a tid of -1. Improve the perf script output in that case. Example: Before: # cat ./autoreap.c #include <sys/types.h> #include <unistd.h> #include <sys/wait.h> #include <signal.h> struct sigaction act = { .sa_handler = SIG_IGN, }; int main() { pid_t child; int status = 0; sigaction(SIGCHLD, &act, NULL); child = fork(); if (child == 0) return 123; wait(&status); return 0; } # gcc -o autoreap autoreap.c # ./perf record -a -e dummy --switch-events ./autoreap [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.948 MB perf.data ] # ./perf script --show-task-events --show-switch-events | grep -C2 'autoreap\|4294967295\|-1' swapper 0 [004] 18462.673613: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25189/25189 perf 25189 [004] 18462.673614: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 autoreap 25189 [004] 18462.673800: PERF_RECORD_COMM exec: autoreap:25189/25189 autoreap 25189 [004] 18462.674042: PERF_RECORD_FORK(25191:25191):(25189:25189) autoreap 25189 [004] 18462.674050: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [004] 18462.674051: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 25189/25189 swapper 0 [005] 18462.674083: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25191/25191 autoreap 25191 [005] 18462.674084: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 swapper 0 [003] 18462.674121: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_preempt 11 [003] 18462.674121: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_preempt 11 [003] 18462.674124: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [003] 18462.674124: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 autoreap 25191 [005] 18462.674138: PERF_RECORD_EXIT(25191:25191):(25189:25189) PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [005] 18462.674149: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4294967295/4294967295 swapper 0 [004] 18462.674182: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25189/25189 autoreap 25189 [004] 18462.674183: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 autoreap 25189 [004] 18462.674218: PERF_RECORD_EXIT(25189:25189):(25188:25188) autoreap 25189 [004] 18462.674225: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [004] 18462.674226: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 25189/25189 swapper 0 [007] 18462.674257: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25188/25188 After: # ./perf script --show-task-events --show-switch-events | grep -C2 'autoreap\|4294967295\|-1' swapper 0 [004] 18462.673613: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25189/25189 perf 25189 [004] 18462.673614: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 autoreap 25189 [004] 18462.673800: PERF_RECORD_COMM exec: autoreap:25189/25189 autoreap 25189 [004] 18462.674042: PERF_RECORD_FORK(25191:25191):(25189:25189) autoreap 25189 [004] 18462.674050: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [004] 18462.674051: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 25189/25189 swapper 0 [005] 18462.674083: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25191/25191 autoreap 25191 [005] 18462.674084: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 swapper 0 [003] 18462.674121: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_preempt 11 [003] 18462.674121: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_preempt 11 [003] 18462.674124: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [003] 18462.674124: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 autoreap 25191 [005] 18462.674138: PERF_RECORD_EXIT(25191:25191):(25189:25189) :-1 -1 [005] 18462.674149: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [005] 18462.674149: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: -1/-1 swapper 0 [004] 18462.674182: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25189/25189 autoreap 25189 [004] 18462.674183: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 autoreap 25189 [004] 18462.674218: PERF_RECORD_EXIT(25189:25189):(25188:25188) autoreap 25189 [004] 18462.674225: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [004] 18462.674226: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 25189/25189 swapper 0 [007] 18462.674257: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 25188/25188 Signed-off-by: -
Zejiang Tang authored
perf has many undocumented options, such as:-vv, --exec-path, --html-path, -p, --paginate,--no-pager, --debugfs-dir, --buildid-dir, --list-cmds, --list-opts. Add entris for these options in perf.txt. Signed-off-by:
Zejiang Tang <tangzejiang@loongson.cn> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: http://lore.kernel.org/lkml/1599645194-8438-1-git-send-email-tangzejiang@loongson.cnSigned-off-by:
-
YueHaibing authored
Remove duplicate header which is included twice. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
-
Andi Kleen authored
Add some documentation how to use the topdown metrics in ring 3. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Co-developed-by:
Kan Liang <kan.liang@linux.intel.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
-
Andi Kleen authored
Icelake has support for reporting per thread TopDown metrics. These are reported differently than the previous TopDown support, each metric is standalone, but scaled to pipeline "slots". We don't need to do anything special for HyperThreading anymore. Teach perf stat --topdown to handle these new metrics and print them in the same way as the previous TopDown metrics. The restrictions of only being able to report information per core is gone. Signed-off-by:
-
Kan Liang authored
With the hardware TopDown metrics feature, sample-read feature should be supported for a topdown group, e.g., sample a non-topdown event and read a topdown metric group. But the current perf record code errors out. For a topdown metric group, the slots event must be the leader of the group, but the leader slots event doesn't support sampling. To support sample-read the topdown metric group, use the 2nd event of the group as the "leader" for the purposes of sampling. Only the platform with Topdown metic feature supports sample-read the topdown group. Add arch_topdown_sample_read() to indicate whether the topdown group supports sample-read. Signed-off-by:
-
Kan Liang authored
The group.h/c only include TopDown group related functions. The name "group" is too generic and inaccurate. Use the name "topdown" to replace it. Move topdown related functions to a dedicated file, topdown.c. Signed-off-by:
-
Jiri Olsa authored
Add the machine__for_each_dso() to iterate over all dso objects defined for the within a machine object. It will be used in the MMAP3 patch series. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200913210313.1985612-22-jolsa@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up fixes. Signed-off-by:
-
- 16 Sep, 2020 4 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.9-2020-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Set PERF_SAMPLE_PERIOD if attr->freq is set. - Remove trailing commas from AMD JSON vendor event files. - Don't clear event's period if set by a event definition term. - Leader sampling shouldn't clear sample period in 'perf test'. - Fix the "signal" test inline assembly when built with DEBUG=1. - Fix memory leaks detected by ASAN, some in normal paths, some in error paths. - Fix 2 memory sanitizer warnings in 'perf bench'. - Fix the ratio comments of miss-events in 'perf stat'. - Prevent override of attr->sample_period for libpfm4 events. - Sync kvm.h and in.h headers with the kernel sources. * tag 'perf-tools-fixes-for-v5.9-2020-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf stat: Fix the ratio comments of miss-events perf test: Free formats for perf pmu parse test perf metric: Do not free metric when failed to resolve perf metric: Free metric when it failed to resolve perf metric: Release expr_parse_ctx after testing perf test: Fix memory leaks in parse-metric test perf parse-event: Fix memory leak in evsel->unit perf evlist: Fix cpu/thread map leak perf metric: Fix some memory leaks - part 2 perf metric: Fix some memory leaks perf test: Free aliases for PMU event map aliases test perf vendor events amd: Remove trailing commas perf test: Leader sampling shouldn't clear sample period perf record: Don't clear event's period if set by a term tools headers UAPI: update linux/in.h copy tools headers UAPI: Sync kvm.h headers with the kernel sources perf record: Prevent override of attr->sample_period for libpfm4 events perf record: Set PERF_RECORD_PERIOD if attr->freq is set. perf bench: Fix 2 memory sanitizer warnings perf test: Fix the "signal" test inline assembly
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk driver fixes from Stephen Boyd: "A handful of clk driver fixes. Mostly they're for error paths or improper memory allocations sizes. Nothing as exciting as a wildfire" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: lpass: Correct goto target in lpass_core_sc7180_probe() clk: versatile: Add of_node_put() before return statement clk: bcm: dvp: Select the reset framework clk: rockchip: Fix initialization of mux_pll_src_4plls_p clk: davinci: Use the correct size when allocating memory
-
Leon Romanovsky authored
Max's and Shravan's usernames were changed while @mellanox.com emails were transferred to be @nvidia.com. Fixes: f6da70d9 ("MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Qi Liu authored
'perf stat' displays miss ratio of L1-dcache, L1-icache, dTLB cache, iTLB cache and LL-cache. Take L1-dcache for example, miss ratio is caculated as "L1-dcache-load-misses/L1-dcache-loads". So "of all L1-dcache hits" is unsuitable to describe it, and "of all L1-dcache accesses" seems better. The comments of L1-icache, dTLB cache, iTLB cache and LL-cache are fixed in the same way. Signed-off-by:
Qi Liu <liuqi115@huawei.com> Reviewed-by:
-
- 15 Sep, 2020 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "Just one fix in libsas for a resource leak in an error path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Fix error path in sas_notify_lldd_dev_found()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security layer fix from James Morris: "A device_cgroup RCU warning fix from Amol Grover" * tag 'fixes-v5.9a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: device_cgroup: Fix RCU list debugging warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linuxLinus Torvalds authored
Pull hyperv fixes from Wei Liu: "Two patches from Michael and Dexuan to fix vmbus hanging issues" * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload Drivers: hv: vmbus: hibernation: do not hang forever in vmbus_bus_resume()
-
Namhyung Kim authored
The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f956 ("perf tests: Move pmu tests into separate object") Signed-off-by: -
Namhyung Kim authored
It's dangerous to free the original metric when it's called from resolve_metric() as it's already in the metric_list and might have other resources too. Instead, it'd better let them bail out and be released properly at the later stage. So add a check when it's called from metricgroup__add_metric() and release it. Also make sure that mp is set properly. Fixes: 83de0b7d ("perf metric: Collect referenced metrics in struct metric_ref_node") Signed-off-by:
-
Namhyung Kim authored
The metricgroup__add_metric() can find multiple match for a metric group and it's possible to fail. Also it can fail in the middle like in resolve_metric() even for single metric. In those cases, the intermediate list and ids will be leaked like: Direct leak of 3 byte(s) in 1 object(s) allocated from: #0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683 #2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906 #3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940 #4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993 #5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045 #6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087 #7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164 #8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196 #9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318 #10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356 #11 0x55f7e70be09b in run_test tests/builtin-test.c:410 #12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 83de0b7d ("perf metric: Collect referenced metrics in struct metric_ref_node") Signed-off-by: -
Namhyung Kim authored
The test_generic_metric() missed to release entries in the pctx. Asan reported following leak (and more): Direct leak of 128 byte(s) in 1 object(s) allocated from: #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14) #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497) #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111 #4 0x55f7e7341667 in expr__add_ref util/expr.c:120 #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783 #6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858 #7 0x55f7e712390b in compute_single tests/parse-metric.c:128 #8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180 #9 0x55f7e712446d in compute_metric tests/parse-metric.c:196 #10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295 #11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355 #12 0x55f7e70be09b in run_test tests/builtin-test.c:410 #13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 6d432c4c ("perf tools: Add test_generic_metric function") Signed-off-by: -
Namhyung Kim authored
It didn't release resources when there's an error so the test_recursion_fail() will leak some memory. Fixes: 0a507af9 ("perf tests: Add parse metric test for ipc metric") Signed-off-by:
-
Namhyung Kim authored
The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb114 ("perf stat: Implement duration_time as a proper event") Signed-off-by: -
Namhyung Kim authored
Asan reported leak of cpu and thread maps as they have one more refcount than released. I found that after setting evlist maps it should release it's refcount. It seems to be broken from the beginning so I chose the original commit as the culprit. But not sure how it's applied to stable trees since there are many changes in the code after that. Fixes: 7e2ed097 ("perf evlist: Store pointer to the cpu and thread maps") Fixes: 4112eb18 ("perf evlist: Default to syswide target when no thread/cpu maps set") Signed-off-by:
-
Namhyung Kim authored
The metric_event_delete() missed to free expr->metric_events and it should free an expr when metric_refs allocation failed. Fixes: 4ea28967 ("perf metric: Collect referenced metrics in struct metric_expr") Signed-off-by:
-
Namhyung Kim authored
I found some memory leaks while reading the metric code. Some are real and others only occur in the error path. When it failed during metric or event parsing, it should release all resources properly. Fixes: b18f3e36 ("perf stat: Support JSON metrics in perf stat") Signed-off-by:
-
Namhyung Kim authored
The aliases were never released causing the following leaks: Indirect leak of 1224 byte(s) in 9 object(s) allocated from: #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628) #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322 #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778 #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295 #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367 #5 0x56332c76a09b in run_test tests/builtin-test.c:410 #6 0x56332c76a09b in test_and_print tests/builtin-test.c:440 #7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695 #8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807 #9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 956a7835 ("perf test: Test pmu-events aliases") Signed-off-by:John Garry <john.garry@huawei.com> Acked-by:
-
Henry Burns authored
The amdzen2/core.json and amdzen/core.json vendor events files have the occasional trailing comma. Since that goes against the JSON standard, lets remove it. Signed-off-by:
Henry Burns <henrywolfeburns@gmail.com> Acked-by:
Kim Phillips <kim.phillips@amd.com> Acked-by:
-
- 14 Sep, 2020 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fix from David Sterba: "One of the recent lockdep fixes introduced a bug that breaks the search ioctl, which is used by some applications (bees, compsize). The patch made it to stable trees so we need this fixup to make it work again" * tag 'for-5.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix wrong address when faulting in pages in the search ioctl
-
Ian Rogers authored
Add test that a sibling with leader sampling doesn't have its period cleared. Signed-off-by:
Ian Rogers <irogers@google.com> Acked-by:
-
Ian Rogers authored
If events in a group explicitly set a frequency or period with leader sampling, don't disable the samples on those events. Prior to 5.8: perf record -e '{cycles/period=12345000/,instructions/period=6789000/}:S' would clear the attributes then apply the config terms. In commit 5f342788 leader sampling configuration was moved to after applying the config terms, in the example, making the instructions' event have its period cleared. This change makes it so that sampling is only disabled if configuration terms aren't present. Committer testing: Before: # perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.051 MB perf.data (6 samples) ] # # perf evlist -v cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 instructions/period=2/: size: 120, config: 0x1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1 # After: # perf record -e '{cycles/period=1/,instructions/period=2/}:S' sleep 0.0001 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (4 samples) ] # perf evlist -v cycles/period=1/: size: 120, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, disabled: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 instructions/period=2/: size: 120, config: 0x1, { sample_period, sample_freq }: 2, sample_type: IP|TID|TIME|READ|ID, read_format: ID|GROUP, sample_id_all: 1, exclude_guest: 1 # Fixes: 5f342788 ("perf evlist: Move leader-sampling configuration") Signed-off-by: -
Arnaldo Carvalho de Melo authored
To get the changes from: 645f0897 ("net: Fix some comments") That don't cause any changes in tooling, its just a typo fix. This silences this tools/perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick the changes in: 15e9e35c ("KVM: MIPS: Change the definition of kvm type") 004a0124 ("arm64/x86: KVM: Introduce steal-time cap") That do not result in any change in tooling, as the additions are not being used in any table generator. This silences these perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Jones <drjones@redhat.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Stephane Eranian authored
Before: $ perf record -c 10000 --pfm-events=cycles:period=77777 Would yield a cycles event with period=10000, instead of 77777. the event string and perf record initializing the event. This was due to an ordering issue between libpfm4 parsing events with attr->sample_period != 0 by the time intent of the author. perf_evsel__config() is invoked. This seems to have been the This patch fixes the problem by preventing override for Signed-off-by:
Stephane Eranian <eranian@google.com> Reviewed-by:
-
David Sharp authored
evsel__config() would only set PERF_RECORD_PERIOD if it set attr->freq from perf record options. When it is set by libpfm events, it would not get set. This changes evsel__config to see if attr->freq is set outside of whether or not it changes attr->freq itself. Signed-off-by:
David Sharp <dhsharp@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: david sharp <dhsharp@google.com> Link: http://lore.kernel.org/lkml/20200912025655.1337192-2-irogers@google.comSigned-off-by:
-
Ian Rogers authored
Memory sanitizer warns if a write is performed where the memory being read for the write is uninitialized. Avoid this warning by initializing the memory. Signed-off-by:
-
Jiri Olsa authored
When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf test signal': Program received signal SIGSEGV, Segmentation fault. 0x0000000000c68548 in __test_function () (gdb) bt #0 0x0000000000c68548 in __test_function () #1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61 #2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ... #3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ... #4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ... #5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ... ... It's caused by the symbol __test_function being in the ".bss" section: $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [28] .bss NOBITS 0000000000c356a0 008346a0 00000000000511f8 0000000000000000 WA 0 0 32 $ nm perf | grep __test_function 0000000000c68548 B __test_function I guess most of the time we're just lucky the inline asm ended up in the ".text" section, so making it specific explicit with push and pop section clauses. $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [13] .text PROGBITS 0000000000431240 00031240 0000000000306faa 0000000000000000 AX 0 0 16 $ nm perf | grep __test_function 00000000004d62c8 T __test_function Committer testing: $ readelf -wi ~/bin/perf | grep producer -m1 <c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ^^^^^ ^^^^^ ^^^^^ $ Before: $ perf test signal 20: Breakpoint overflow signal handler : FAILED! $ After: $ perf test signal 20: Breakpoint overflow signal handler : Ok $ Fixes: 8fd34e1c ("perf test: Improve bp_signal") Signed-off-by: -
Linus Torvalds authored
Yunhai Zhang recently fixed a VGA software scrollback bug in commit ebfdfeea ("vgacon: Fix for missing check in scrollback handling"), but that then made people look more closely at some of this code, and there were more problems on the vgacon side, but also the fbcon software scrollback. We don't really have anybody who maintains this code - probably because nobody actually _uses_ it any more. Sure, people still use both VGA and the framebuffer consoles, but they are no longer the main user interfaces to the kernel, and haven't been for decades, so these kinds of extra features end up bitrotting and not really being used. So rather than try to maintain a likely unused set of code, I'll just aggressively remove it, and see if anybody even notices. Maybe there are people who haven't jumped on the whole GUI badnwagon yet, and think it's just a fad. And maybe those people use the scrollback code. If that turns out to be the case, we can resurrect this again, once we've found the sucker^Wmaintainer for it who actually uses it. Reported-by:
NopNop Nop <nopitydays@gmail.com> Tested-by:
Willy Tarreau <w@1wt.eu> Cc: 张云海 <zhangyunhai@nsfocus.com> Acked-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
