- 13 Jun, 2024 8 commits
-
-
Michael Chan authored
Firmware interface 1.10.2.118 has increased the size of HWRM_PORT_PHY_QCFG response beyond the maximum size that can be forwarded. When the VF's link state is not the default auto state, the PF will need to forward the response back to the VF to indicate the forced state. This regression may cause the VF to fail to initialize. Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum 96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the new speeds2 fields are beyond the legacy structure. Also modify bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96 bytes to make this failure more obvious. Fixes: 84a911db ("bnxt_en: Update firmware interface to 1.10.2.118") Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Ziwei Xiao authored
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it is freed with dev_kfree_skb_any(). This can result in a subsequent call to napi_get_frags returning a dangling pointer. Fix this by clearing napi->skb before the skb is freed. Fixes: 9b8dd5e5 ("gve: DQO: Add RX path") Cc: stable@vger.kernel.org Reported-by:
Shailend Chand <shailend@google.com> Signed-off-by:
Ziwei Xiao <ziweixiao@google.com> Reviewed-by:
Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by:
Praveen Kaligineedi <pkaligineedi@google.com> Link: https://lore.kernel.org/r/20240612001654.923887-1-ziweixiao@google.comSigned-off-by:
-
Taehee Yoo authored
When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240612060446.1754392-1-ap420073@gmail.comSigned-off-by:
-
Sasha Neftin authored
This reverts commit 86167183. igc_ptp_init() needs to be called before igc_reset(), otherwise kernel crash could be observed. Following the corresponding discussion [1] and [2] revert this commit. Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1] Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2] Fixes: 86167183 ("igc: fix a log entry using uninitialized netdev") Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Nikolay Aleksandrov says: ==================== net: bridge: mst: fix suspicious rcu usage warning This set fixes a suspicious RCU usage warning triggered by syzbot[1] in the bridge's MST code. After I converted br_mst_set_state to RCU, I forgot to update the vlan group dereference helper. Fix it by using the proper helper, in order to do that we need to pass the vlan group which is already obtained correctly by the callers for their respective context. Patch 01 is a requirement for the fix in patch 02. Note I did consider rcu_dereference_rtnl() but the churn is much bigger and in every part of the bridge. We can do that as a cleanup in net-next. [1] https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe ============================= WARNING: suspicious RCU usage 6.10.0-rc2-syzkaller-00235-g8a929806 #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.1/5374: #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: mmap_read_lock include/linux/mmap_lock.h:144 [inline] #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: __mm_populate+0x1b0/0x460 mm/gup.c:2111 #1: ffffc90000a18c00 ((&p->forward_delay_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x650 kernel/time/timer.c:1789 #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86 #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: br_mst_set_state+0x171/0x7a0 net/bridge/br_mst.c:105 stack backtrace: CPU: 1 PID: 5374 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00235-g8a929806 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x29e/0x7a0 net/bridge/br_mst.c:106 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers kernel/time/timer.c:2417 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428 run_timer_base kernel/time/timer.c:2437 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> ==================== Link: https://lore.kernel.org/r/20240609103654.914987-1-razor@blackwall.orgSigned-off-by:
-
Nikolay Aleksandrov authored
I converted br_mst_set_state to RCU to avoid a vlan use-after-free but forgot to change the vlan group dereference helper. Switch to vlan group RCU deref helper to fix the suspicious rcu usage warning. Fixes: 3a7c1661 ("net: bridge: mst: fix vlan use-after-free") Reported-by: syzbot+9bbe2de1bc9d470eb5fe@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5feSigned-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240609103654.914987-3-razor@blackwall.orgSigned-off-by:
-
Nikolay Aleksandrov authored
Pass the already obtained vlan group pointer to br_mst_vlan_set_state() instead of dereferencing it again. Each caller has already correctly dereferenced it for their context. This change is required for the following suspicious RCU dereference fix. No functional changes intended. Fixes: 3a7c1661 ("net: bridge: mst: fix vlan use-after-free") Reported-by: syzbot+9bbe2de1bc9d470eb5fe@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5feSigned-off-by:
-
Petr Pavlu authored
The net.ipv6.route.flush system parameter takes a value which specifies a delay used during the flush operation for aging exception routes. The written value is however not used in the currently requested flush and instead utilized only in the next one. A problem is that ipv6_sysctl_rtcache_flush() first reads the old value of net->ipv6.sysctl.flush_delay into a local delay variable and then calls proc_dointvec() which actually updates the sysctl based on the provided input. Fix the problem by switching the order of the two operations. Fixes: 4990509f ("[NETNS][IPV6]: Make sysctls route per namespace.") Signed-off-by:
Petr Pavlu <petr.pavlu@suse.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240607112828.30285-1-petr.pavlu@suse.comSigned-off-by:
-
- 12 Jun, 2024 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes insufficient sanitization of netlink attributes for the inner expression which can trigger nul-pointer dereference, from Davide Ornaghi. Patch #2 address a report that there is a race condition between namespace cleanup and the garbage collection of the list:set type. This patch resolves this issue with other minor issues as well, from Jozsef Kadlecsik. Patch #3 ip6_route_me_harder() ignores flowlabel/dsfield when ip dscp has been mangled, this unbreaks ip6 dscp set $v, from Florian Westphal. All of these patches address issues that are present in several releases. * tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: Use flowlabel flow key when re-routing mangled packets netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type netfilter: nft_inner: validate mandatory meta and payload ==================== Link: https://lore.kernel.org/r/20240611220323.413713-1-pablo@netfilter.orgSigned-off-by: -
Xiaolei Wang authored
The current cbs parameter depends on speed after uplinking, which is not needed and will report a configuration error if the port is not initially connected. The UAPI exposed by tc-cbs requires userspace to recalculate the send slope anyway, because the formula depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. Therefore, we use offload->sendslope and offload->idleslope to derive the original port_transmit_rate from the CBS formula. Fixes: 1f705bc6 ("net: stmmac: Add support for CBS QDISC") Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240608143524.2065736-1-xiaolei.wang@windriver.comSigned-off-by:
-
Joshua Washington authored
TSO currently fails when the skb's gso_type field has more than one bit set. TSO packets can be passed from userspace using PF_PACKET, TUNTAP and a few others, using virtio_net_hdr (e.g., PACKET_VNET_HDR). This includes virtualization, such as QEMU, a real use-case. The gso_type and gso_size fields as passed from userspace in virtio_net_hdr are not trusted blindly by the kernel. It adds gso_type |= SKB_GSO_DODGY to force the packet to enter the software GSO stack for verification. This issue might similarly come up when the CWR bit is set in the TCP header for congestion control, causing the SKB_GSO_TCP_ECN gso_type bit to be set. Fixes: a57e5de4 ("gve: DQO: Add TX path") Signed-off-by:
Joshua Washington <joshwash@google.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Suggested-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Andrei Vagin <avagin@gmail.com> v2 - Remove unnecessary comments, remove line break between fixes tag and signoffs. v3 - Add back unrelated empty line removal. Link: https://lore.kernel.org/r/20240610225729.2985343-1-joshwash@google.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci_sync: fix not using correct handle - L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ - L2CAP: fix connection setup in l2cap_connect * tag 'for-net-2024-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: fix connection setup in l2cap_connect Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ Bluetooth: hci_sync: Fix not using correct handle ==================== Link: https://lore.kernel.org/r/20240610135803.920662-1-luiz.dentz@gmail.comSigned-off-by:
-
Kory Maincent authored
ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP as reported by checkpatch script. Fixes: 18ff0bcd ("ethtool: add interface to interact with Ethernet Power Equipment") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240610083426.740660-1-kory.maincent@bootlin.comSigned-off-by:
-
- 11 Jun, 2024 10 commits
-
-
Florian Westphal authored
'ip6 dscp set $v' in an nftables outpute route chain has no effect. While nftables does detect the dscp change and calls the reroute hook. But ip6_route_me_harder never sets the dscp/flowlabel: flowlabel/dsfield routing rules are ignored and no reroute takes place. Thanks to Yi Chen for an excellent reproducer script that I used to validate this change. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Yi Chen <yiche@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Jozsef Kadlecsik authored
Lion Ackermann reported that there is a race condition between namespace cleanup in ipset and the garbage collection of the list:set type. The namespace cleanup can destroy the list:set type of sets while the gc of the set type is waiting to run in rcu cleanup. The latter uses data from the destroyed set which thus leads use after free. The patch contains the following parts: - When destroying all sets, first remove the garbage collectors, then wait if needed and then destroy the sets. - Fix the badly ordered "wait then remove gc" for the destroy a single set case. - Fix the missing rcu locking in the list:set type in the userspace test case. - Use proper RCU list handlings in the list:set type. The patch depends on c1193d9b (netfilter: ipset: Add list flush to cancel_gc). Fixes: 97f7cf1c (netfilter: ipset: fix performance regression in swap operation) Reported-by:
Lion Ackermann <nnamrec@gmail.com> Tested-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
-
Davide Ornaghi authored
Check for mandatory netlink attributes in payload and meta expression when used embedded from the inner expression, otherwise NULL pointer dereference is possible from userspace. Fixes: a150d122 ("netfilter: nft_meta: add inner match support") Fixes: 3a07327d ("netfilter: nft_inner: support for inner tunnel header matching") Signed-off-by:
Davide Ornaghi <d.ornaghi97@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Due to timer wheel implementation, a timer will usually fire after its schedule. For instance, for HZ=1000, a timeout between 512ms and 4s has a granularity of 64ms. For this range of values, the extra delay could be up to 63ms. For TCP, this means that tp->rcv_tstamp may be after inet_csk(sk)->icsk_timeout whenever the timer interrupt finally triggers, if one packet came during the extra delay. We need to make sure tcp_rtx_probe0_timed_out() handles this case. Fixes: e89688e3 ("net: tcp: fix unexcepted socket die when snd_wnd is 0") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20240607125652.1472540-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: various fixes The different patches here are some unrelated fixes for MPTCP: - Patch 1 ensures 'snd_una' is initialised on connect in case of MPTCP fallback to TCP followed by retransmissions before the processing of any other incoming packets. A fix for v5.9+. - Patch 2 makes sure the RmAddr MIB counter is incremented, and only once per ID, upon the reception of a RM_ADDR. A fix for v5.10+. - Patch 3 doesn't update 'add addr' related counters if the connect() was not possible. A fix for v5.7+. - Patch 4 updates the mailmap file to add Geliang's new email address. ==================== Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-0-1ab9ddfa3d00@kernel.orgSigned-off-by:
-
Geliang Tang authored
Just like my other email addresses, map my new one to kernel.org account too. My new email address uses "last name, first name" format, which is different from my other email addresses. This mailmap is also used to indicate that it is actually the same person. Suggested-by:
Mat Martineau <martineau@kernel.org> Suggested-by:
Matthieu Baerts <matttbe@kernel.org> Signed-off-by:
Geliang Tang <geliang@kernel.org> Reviewed-by:
-
YonglongLi authored
The creation of new subflows can fail for different reasons. If no subflow have been created using the received ADD_ADDR, the related counters should not be updated, otherwise they will never be decremented for events related to this ID later on. For the moment, the number of accepted ADD_ADDR is only decremented upon the reception of a related RM_ADDR, and only if the remote address ID is currently being used by at least one subflow. In other words, if no subflow can be created with the received address, the counter will not be decremented. In this case, it is then important not to increment pm.add_addr_accepted counter, and not to modify pm.accept_addr bit. Note that this patch does not modify the behaviour in case of failures later on, e.g. if the MP Join is dropped or rejected. The "remove invalid addresses" MP Join subtest has been modified to validate this case. The broadcast IP address is added before the "valid" address that will be used to successfully create a subflow, and the limit is decreased by one: without this patch, it was not possible to create the last subflow, because: - the broadcast address would have been accepted even if it was not usable: the creation of a subflow to this address results in an error, - the limit of 2 accepted ADD_ADDR would have then been reached. Fixes: 01cacb00 ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Co-developed-by:
YonglongLi <liyonglong@chinatelecom.cn> Reviewed-by:
-
YonglongLi authored
The RmAddr MIB counter is supposed to be incremented once when a valid RM_ADDR has been received. Before this patch, it could have been incremented as many times as the number of subflows connected to the linked address ID, so it could have been 0, 1 or more than 1. The "RmSubflow" is incremented after a local operation. In this case, it is normal to tied it with the number of subflows that have been actually removed. The "remove invalid addresses" MP Join subtest has been modified to validate this case. A broadcast IP address is now used instead: the client will not be able to create a subflow to this address. The consequence is that when receiving the RM_ADDR with the ID attached to this broadcast IP address, no subflow linked to this ID will be found. Fixes: 7a7e52e3 ("mptcp: add RM_ADDR related mibs") Cc: stable@vger.kernel.org Co-developed-by:
-
Paolo Abeni authored
This is strictly related to commit fb7a0d33 ("mptcp: ensure snd_nxt is properly initialized on connect"). It turns out that syzkaller can trigger the retransmit after fallback and before processing any other incoming packet - so that snd_una is still left uninitialized. Address the issue explicitly initializing snd_una together with snd_nxt and write_seq. Suggested-by:
Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Johannes Berg authored
When the noop_qdisc owner isn't initialized, then it will be 0, so packets will erroneously be regarded as having been subject to recursion as long as only CPU 0 queues them. For non-SMP, that's all packets, of course. This causes a change in what's reported to userspace, normally noop_qdisc would drop packets silently, but with this change the syscall returns -ENOBUFS if RECVERR is also set on the socket. Fix this by initializing the owner field to -1, just like it would be for dynamically allocated qdiscs by qdisc_alloc(). Fixes: 0f022d32 ("net/sched: Fix mirred deadlock on device recursion") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Reviewed-by:
-
- 10 Jun, 2024 9 commits
-
-
Pauli Virtanen authored
The amp_id argument of l2cap_connect() was removed in commit 84a4bb65 ("Bluetooth: HCI: Remove HCI_AMP support") It was always called with amp_id == 0, i.e. AMP_ID_BREDR == 0x00 (ie. non-AMP controller). In the above commit, the code path for amp_id != 0 was preserved, although it should have used the amp_id == 0 one. Restore the previous behavior of the non-AMP code path, to fix problems with L2CAP connections. Fixes: 84a4bb65 ("Bluetooth: HCI: Remove HCI_AMP support") Signed-off-by:
Pauli Virtanen <pav@iki.fi> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This removes the bogus check for max > hcon->le_conn_max_interval since the later is just the initial maximum conn interval not the maximum the stack could support which is really 3200=4000ms. In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values of the following fields in IXIT that would cause hci_check_conn_params to fail: TSPX_conn_update_int_min TSPX_conn_update_int_max TSPX_conn_update_peripheral_latency TSPX_conn_update_supervision_timeout Link: https://github.com/bluez/bluez/issues/847 Fixes: e4b01951 ("Bluetooth: Enforce validation on max value of connection interval") Signed-off-by:
-
Luiz Augusto von Dentz authored
When setting up an advertisement the code shall always attempt to use the handle set by the instance since it may not be equal to the instance ID. Fixes: e77f43d5 ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1") Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== geneve fixes This small patchset by Gal provides bug fixes to the geneve tunnels flows. Patch 1 fixes an incorrect value returned by the inner network header offset helper. Patch 2 fixes an issue inside the mlx5e tunneling flow. It 'happened' to be harmless so far, before applying patch 1. Series generated against: commit d30d0e49 ("Merge tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Move the vxlan_features_check() call to after we verified the packet is a tunneled VXLAN packet. Without this, tunneled UDP non-VXLAN packets (for ex. GENENVE) might wrongly not get offloaded. In some cases, it worked by chance as GENEVE header is the same size as VXLAN, but it is obviously incorrect. Fixes: e3cfc7e6 ("net/mlx5e: TX, Add geneve tunnel stateless offload support") Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
-
Gal Pressman authored
When innerprotoinherit is set, the tunneled packets do not have an inner Ethernet header. Change 'maclen' to not always assume the header length is ETH_HLEN, as there might not be a MAC header. This resolves issues with drivers (e.g. mlx5, in mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset to be correct, and use it for TX offloads. Fixes: d8a6213d ("geneve: fix header validation in geneve[6]_xmit_skb") Signed-off-by:
-
Andy Shevchenko authored
The documentation for device_get_named_child_node() mentions this important point: " The caller is responsible for calling fwnode_handle_put() on the returned fwnode pointer. " Add fwnode_handle_put() to avoid leaked references. Fixes: 1e264f9d ("net: dsa: qca8k: add LEDs basic support") Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Eric Dumazet authored
tcp_v6_syn_recv_sock() calls ip6_dst_store() before inet_sk(newsk)->pinet6 has been set up. This means ip6_dst_store() writes over the parent (listener) np->dst_cookie. This is racy because multiple threads could share the same parent and their final np->dst_cookie could be wrong. Move ip6_dst_store() call after inet_sk(newsk)->pinet6 has been changed and after the copy of parent ipv6_pinfo. Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets") Signed-off-by:
-
David Wei authored
The default ndo_get_iflink() implementation returns the current ifindex of the netdev. But the overridden nsim_get_iflink() returns 0 if the current nsim is not linked, breaking backwards compatibility for userspace that depend on this behaviour. Fix the problem by returning the current ifindex if not linked to a peer. Fixes: 8debcf58 ("netdevsim: add ndo_get_iflink() implementation") Reported-by:
Yu Watanabe <watanabe.yu@gmail.com> Suggested-by:
David Wei <dw@davidwei.uk> Signed-off-by:
-
- 09 Jun, 2024 1 commit
-
-
Sagar Cheluvegowda authored
Commit 070246e4 ("net: stmmac: Fix for mismatched host/device DMA address width") added support in the stmmac driver for platform drivers to indicate the host DMA width, but left it up to authors of the specific platforms to indicate if their width differed from the addr64 register read from the MAC itself. Qualcomm's EMAC4 integration supports only up to 36 bit width (as opposed to the addr64 register indicating 40 bit width). Let's indicate that in the platform driver to avoid a scenario where the driver will allocate descriptors of size that is supported by the CPU which in our case is 36 bit, but as the addr64 register is still capable of 40 bits the device will use two descriptors as one address. Fixes: 8c4d92e8 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms") Signed-off-by:
Sagar Cheluvegowda <quic_scheluve@quicinc.com> Reviewed-by:
Andrew Halaney <ahalaney@redhat.com> Signed-off-by:
-
- 07 Jun, 2024 6 commits
-
-
Aleksandr Mishin authored
In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value, but then it is unconditionally passed to skb_add_rx_frag() which looks strange and could lead to null pointer dereference. lio_vf_rep_copy_packet() call trace looks like: octeon_droq_process_packets octeon_droq_fast_process_packets octeon_droq_dispatch_pkt octeon_create_recv_info ...search in the dispatch_list... ->disp_fn(rdisp->rinfo, ...) lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...) In this path there is no code which sets pg_info->page to NULL. So this check looks unneeded and doesn't solve potential problem. But I guess the author had reason to add a check and I have no such card and can't do real test. In addition, the code in the function liquidio_push_packet() in liquidio/lio_core.c does exactly the same. Based on this, I consider the most acceptable compromise solution to adjust this issue by moving skb_add_rx_frag() into conditional scope. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 1f233f32 ("liquidio: switchdev support for LiquidIO NIC") Signed-off-by:
Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by:
-
David S. Miller authored
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver There are some bugfix for the HNS3 ethernet driver ==================== Signed-off-by: -
Jie Wang authored
Currently hns3 ring buffer init process would hold cpu too long with big Tx/Rx ring depth. This could cause soft lockup. So this patch adds cond_resched() to the process. Then cpu can break to run other tasks instead of busy looping. Fixes: a723fb8e ("net: hns3: refine for set ring parameters") Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Reviewed-by:
-
Yonglong Liu authored
When link status change, the nic driver need to notify the roce driver to handle this event, but at this time, the roce driver may uninit, then cause kernel crash. To fix the problem, when link status change, need to check whether the roce registered, and when uninit, need to wait link update finish. Fixes: 45e92b7e ("net: hns3: add calling roce callback function when link status change") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
-
Udit Kumar authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for TI specific phy header files. This allows for Linux kernel files to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Trent Piepho <tpiepho@impinj.com> Cc: Wadim Egorov <w.egorov@phytec.de> Cc: Kip Broadhurst <kbroadhurst@ti.com> Signed-off-by:
Udit Kumar <u-kumar1@ti.com> Acked-by:
Wadim Egorov <w.egorov@phytec.de> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Csókás, Bence authored
If the module is in SFP_MOD_ERROR, `sfp_sm_mod_remove()` will not be run. As a consequence, `sfp_hwmon_remove()` is not getting run either, leaving a stale `hwmon` device behind. `sfp_sm_mod_remove()` itself checks `sfp->sm_mod_state` anyways, so this check was not really needed in the first place. Fixes: d2e816c0 ("net: sfp: handle module remove outside state machine") Signed-off-by:
"Csókás, Bence" <csokas.bence@prolan.hu> Reviewed-by:
-
- 06 Jun, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from BPF and big collection of fixes for WiFi core and drivers. Current release - regressions: - vxlan: fix regression when dropping packets due to invalid src addresses - bpf: fix a potential use-after-free in bpf_link_free() - xdp: revert support for redirect to any xsk socket bound to the same UMEM as it can result in a corruption - virtio_net: - add missing lock protection when reading return code from control_buf - fix false-positive lockdep splat in DIM - Revert "wifi: wilc1000: convert list management to RCU" - wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config Previous releases - regressions: - rtnetlink: make the "split" NLM_DONE handling generic, restore the old behavior for two cases where we started coalescing those messages with normal messages, breaking sloppily-coded userspace - wifi: - cfg80211: validate HE operation element parsing - cfg80211: fix 6 GHz scan request building - mt76: mt7615: add missing chanctx ops - ath11k: move power type check to ASSOC stage, fix connecting to 6 GHz AP - ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs - rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS - iwlwifi: mvm: fix a crash on 7265 Previous releases - always broken: - ncsi: prevent multi-threaded channel probing, a spec violation - vmxnet3: disable rx data ring on dma allocation failure - ethtool: init tsinfo stats if requested, prevent unintentionally reporting all-zero stats on devices which don't implement any - dst_cache: fix possible races in less common IPv6 features - tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED - ax25: fix two refcounting bugs - eth: ionic: fix kernel panic in XDP_TX action Misc: - tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB" * tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits) selftests: net: lib: set 'i' as local selftests: net: lib: avoid error removing empty netns name selftests: net: lib: support errexit with busywait net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool() ipv6: fix possible race in __fib6_drop_pcpu_from() af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill(). af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen(). af_unix: Use skb_queue_empty_lockless() in unix_release_sock(). af_unix: Use unix_recvq_full_lockless() in unix_stream_connect(). af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen. af_unix: Annotate data-races around sk->sk_sndbuf. af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG. af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb(). af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg(). af_unix: Annotate data-race of sk->sk_state in unix_accept(). af_unix: Annotate data-race of sk->sk_state in unix_stream_connect(). af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll(). af_unix: Annotate data-race of sk->sk_state in unix_inq_len(). af_unix: Annodate data-races around sk->sk_state for writers. af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer. ...
-
