Skip to content

L
linux
Switch branch/tag
  1. 23 Jun, 2021 32 commits
  3. 22 Jun, 2021 8 commits
    • David S. Miller's avatar
      Merge branch 'mptcp-C-flag-and-fixes' · 38f75922
      David S. Miller authored 
      Mat Martineau says:

====================
mptcp: Connection-time 'C' flag and two fixes

Here are six more patches from the MPTCP tree.

Most of them add support for the 'C' flag in the MPTCP connection-time
option headers. This flag affects how the initial address and port are
treated by each peer. Normally one peer may send MP_JOIN requests to the
remote address and port that were used when initiating the MPTCP
connection. The 'C' bit indicates that MP_JOINs should only be sent to
remote addresses that have been advertised with ADD_ADDR.

The other two patches are unrelated improvements.

Patches 1-4: Add the 'C' flag feature, a sysctl to optionally enable it,
and a selftest.

Patch 5: Adjust rp_filter settings in a selftest.

Patch 6: Improve rbuf cleanup for MPTCP sockets.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      38f75922
    • Paolo Abeni's avatar
      mptcp: refine mptcp_cleanup_rbuf · fde56eea
      Paolo Abeni authored 
      The current cleanup rbuf tries a bit too hard to avoid acquiring
the subflow socket lock. We may end-up delaying the needed ack,
or skip acking a blocked subflow.

Address the above extending the conditions used to trigger the cleanup
to reflect more closely what TCP does and invoking tcp_cleanup_rbuf()
on all the active subflows.

Note that we can't replicate the exact tests implemented in
tcp_cleanup_rbuf(), as MPTCP lacks some of the required info - e.g.
ping-pong mode.
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fde56eea
    • Yonglong Li's avatar
      selftests: mptcp: turn rp_filter off on each NIC · d8e336f7
      Yonglong Li authored 
      To turn rp_filter off we should:

  echo 0 > /proc/sys/net/ipv4/conf/default/rp_filter

and

  echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter

before NIC created.
Co-developed-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarYonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d8e336f7
    • Geliang Tang's avatar
      selftests: mptcp: add deny_join_id0 testcases · 0cddb4a6
      Geliang Tang authored 
      This patch added a new argument '-d' for mptcp_join.sh script, to invoke
the testcases for the MP_CAPABLE 'C' flag.
Acked-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarGeliang Tang <geliangtang@gmail.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0cddb4a6
    • Geliang Tang's avatar
      mptcp: add deny_join_id0 in mptcp_options_received · df377be3
      Geliang Tang authored 
      This patch added a new flag named deny_join_id0 in struct
mptcp_options_received. Set it when MP_CAPABLE with the flag
MPTCP_CAP_DENYJOIN_ID0 is received.

Also add a new flag remote_deny_join_id0 in struct mptcp_pm_data. When the
flag deny_join_id0 is set, set this remote_deny_join_id0 flag.

In mptcp_pm_create_subflow_or_signal_addr, if the remote_deny_join_id0 flag
is set, and the remote address id is zero, stop this connection.
Suggested-by: default avatarFlorian Westphal <fw@strlen.de>
Acked-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarGeliang Tang <geliangtang@gmail.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      df377be3
    • Geliang Tang's avatar
      mptcp: add allow_join_id0 in mptcp_out_options · bab6b88e
      Geliang Tang authored 
      This patch defined a new flag MPTCP_CAP_DENY_JOIN_ID0 for the third bit,
labeled "C" of the MP_CAPABLE option.

Add a new flag allow_join_id0 in struct mptcp_out_options. If this flag is
set, send out the MP_CAPABLE option with the flag MPTCP_CAP_DENY_JOIN_ID0.
Acked-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarGeliang Tang <geliangtang@gmail.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bab6b88e
    • Geliang Tang's avatar
      mptcp: add sysctl allow_join_initial_addr_port · d2f77960
      Geliang Tang authored 
      This patch added a new sysctl, named allow_join_initial_addr_port, to
control whether allow peers to send join requests to the IP address and
port number used by the initial subflow.
Suggested-by: default avatarFlorian Westphal <fw@strlen.de>
Acked-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarGeliang Tang <geliangtang@gmail.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d2f77960
    • David S. Miller's avatar
      Merge branch 'sctp-packetization-path-MTU' · a432c771
      David S. Miller authored 
      Xin Long says:

====================
sctp: implement RFC8899: Packetization Layer Path MTU Discovery for SCTP transport

Overview(From RFC8899):

  In contrast to PMTUD, Packetization Layer Path MTU Discovery
  (PLPMTUD) [RFC4821] introduces a method that does not rely upon
  reception and validation of PTB messages.  It is therefore more
  robust than Classical PMTUD.  This has become the recommended
  approach for implementing discovery of the PMTU [BCP145].

  It uses a general strategy in which the PL sends probe packets to
  search for the largest size of unfragmented datagram that can be sent
  over a network path.  Probe packets are sent to explore using a
  larger packet size.  If a probe packet is successfully delivered (as
  determined by the PL), then the PLPMTU is raised to the size of the
  successful probe.  If a black hole is detected (e.g., where packets
  of size PLPMTU are consistently not received), the method reduces the
  PLPMTU.

SCTP Probe Packets:

  As the RFC suggested, the probe packets consist of an SCTP common header
  followed by a HEARTBEAT chunk and a PAD chunk. The PAD chunk is used to
  control the length of the probe packet.  The HEARTBEAT chunk is used to
  trigger the sending of a HEARTBEAT ACK chunk to confirm this probe on
  the HEARTBEAT sender.

  The HEARTBEAT chunk also carries a Heartbeat Information parameter that
  includes the probe size to help an implementation associate a HEARTBEAT
  ACK with the size of probe that was sent. The sender use the nonce and
  the probe size to verify the information returned.

Detailed Implementation on SCTP:

                       +------+
              +------->| Base |-----------------+ Connectivity
              |        +------+                 | or BASE_PLPMTU
              |           |                     | confirmation failed
              |           |                     v
              |           | Connectivity    +-------+
              |           | and BASE_PLPMTU | Error |
              |           | confirmed       +-------+
              |           |                     | Consistent
              |           v                     | connectivity
   Black Hole |       +--------+                | and BASE_PLPMTU
    detected  |       | Search |<---------------+ confirmed
              |       +--------+
              |          ^  |
              |          |  |
              |    Raise |  | Search
              |    timer |  | algorithm
              |  expired |  | completed
              |          |  |
              |          |  v
              |   +-----------------+
              +---| Search Complete |
                  +-----------------+

  When PLPMTUD is enabled, it's in Base state, and starts to probe with
  BASE_PLPMTU (1200). If this probe succeeds, it goes to Search state;
  If this probe fails, it goes to Error state under which pl.pmtu goes
  down to MIN_PLPMTU (512) and keeps probing with BASE_PLPMTU until it
  succeeds and goes to Search state.

  During the Search state, the probe size is growing by a Big step (32)
  every time when the last probe succeeds at the beginning. Once a probe
  (such as 1420) fails after trying MAX_PROBES (3) times, the probe_size
  goes back to the last one (1420 - 32 = 1388), meanwhile 'probe_high'
  is set to 1420 and the growing step becomes a Small one (4). Then the
  probe is continuing with a Small step grown each round. Until it gets
  the optimal size (such as 1400) when probe with its next probe size
  (1404) fails, it sync this size to pathmtu and goes to Complete state.

  In Complete state, it will only does a probe check for the pathmtu just
  set, if it fails, which means a Black Hole is detected and it goes back
  to Base state. If it succeeds, it goes back to Search state again, and
  probe is continuing with growing a Small step (1400 + 4). If this probe
  fails, probe_high is set and goes back to 1388 and then Complete state,
  which is kind of a loop normally. However if the env's pathmtu changes
  to a big size somehow, this probe will succeed and then probe continues
  with growing a Big step (1400 + 32) each round until another probe fails.

PTB Messages Process:

  PLPMTUD doesn't rely on these package to find the pmtu, and shouldn't
  trust it either. When processing them, it only changes the probe_size
  to PL_PTB_SIZE(info - hlen) if 'pl.pmtu < PL_PTB_SIZE < the current
  probe_size' druing Search state. As this could help probe_size to get
  to the optimal size faster, for exmaple:

  pl.pmtu = 1388, probe_size = 1420, while the env's pathmtu = 1400.
  When probe_size is 1420, a Toobig packet with 1400 comes back. If probe
  size changes to use 1400, it will save quite a few rounds to get there.
  But of course after having this value, PLPMTUD will still verify it on
  its own before using it.

Patches:

  - Patch 1-6: introduce some new constants/variables from the RFC, systcl
    and members in transport, APIs for the following patches, chunks and
    a timer for the probe sending and some codes for the probe receiving.

  - Patch 7-9: implement the state transition on the tx path, rx path and
    toobig ICMP packet processing. This is the main algorithm part.

  - Patch 10: activate this feature

  - Patch 11-14: improve the process for ICMP packets for SCTP over UDP,
    so that it can also be covered by this feature.

Tests:

  - do sysctl and setsockopt tests for this feature's enabling and disabling.

  - get these pr_debug points for this feature by
      # cat /sys/kernel/debug/dynamic_debug/control | grep PLP
    and enable them on kernel dynamic debug, then play with the pathmtu and
    check if the state transition and plpmtu change match the RFC.

  - do the above tests for SCTP over IPv4/IPv6 and SCTP over UDP.

v1->v2:
  - See Patch 06/14.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a432c771
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7