- 07 Sep, 2016 34 commits
-
-
Heikki Krogerus authored
commit 4491ed50 upstream. Intel Kabylake PCH has the same DWC3 than Intel Sunrisepoint. Add the new ID to the supported devices. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lu Baolu authored
commit 53958751 upstream. In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling into usb_sg_cancel(). usb_sg_cancel() will do nothing and return directly if req->status has been set to a non-zero value. This will cause driver hang whenever transfer time out is triggered. This patch fixes this issue. It could be backported to stable kernel with version later than v3.15. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
-
Marc Ohlf authored
commit bc337b51 upstream. In ehci_turn_off_all_ports() all EHCI port registers are cleared to zero. On some hardware, this can lead to an system hang, when ehci_port_power() accesses the already cleared registers. This patch changes the order of cleanup. First call ehci_port_power() which respects the current bits in port status registers and afterwards cleanup the hard way by setting everything to zero. Signed-off-by:
Marc Ohlf <ohlf@mkt-sys.de> Acked-by:
-
Horia Geantă authored
commit 2fdea258 upstream. To be able to generate shared descriptors for AEAD, the authentication size needs to be known. However, there is no imposed order of calling .setkey, .setauthsize callbacks. Thus, in case authentication size is not known at .setkey time, defer it until .setauthsize is called. The authsize != 0 check was incorrectly removed when converting the driver to the new AEAD interface. Fixes: 479bcc7c ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Horia Geantă authored
commit 1d2d87e8 upstream. There are a few things missed by the conversion to the new AEAD interface: 1 - echainiv(authenc) encrypt shared descriptor The shared descriptor is incorrect: due to the order of operations, at some point in time MATH3 register is being overwritten. 2 - buffer used for echainiv(authenc) encrypt shared descriptor Encrypt and givencrypt shared descriptors (for AEAD ops) are mutually exclusive and thus use the same buffer in context state: sh_desc_enc. However, there's one place missed by s/sh_desc_givenc/sh_desc_enc, leading to errors when echainiv(authenc(...)) algorithms are used: DECO: desc idx 14: Header Error. Invalid length or parity, or certain other problems. While here, also fix a typo: dma_mapping_error() is checking for validity of sh_desc_givenc_dma instead of sh_desc_enc_dma. Fixes: 479bcc7c ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by:
-
Russell King authored
commit a0118c8b upstream. Since 6de62f15 ("crypto: algif_hash - Require setkey before accept(2)"), the AF_ALG interface requires userspace to provide a key to any algorithm that has a setkey method. However, the non-HMAC algorithms are not keyed, so setting a key is unnecessary. Fix this by removing the setkey method from the non-keyed hash algorithms. Fixes: 6de62f15 ("crypto: algif_hash - Require setkey before accept(2)") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Marc Zyngier authored
commit f3b0946d upstream. Bharat Kumar Gogada reported issues with the generic MSI code, where the end-point ended up with garbage in its MSI configuration (both for the vector and the message). It turns out that the two MSI paths in the kernel are doing slightly different things: generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI And it turns out that end-points are allowed to latch the content of the MSI configuration registers as soon as MSIs are enabled. In Bharat's case, the end-point ends up using whatever was there already, which is not what you want. In order to make things converge, we introduce a new MSI domain flag (MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set, this flag forces the programming of the end-point as soon as the MSIs are allocated. A consequence of this is that we have an extra activate in irq_startup, but that should be without much consequence. tglx: - Several people reported a VMWare regression with PCI/MSI-X passthrough. It turns out that the patch also cures that issue. - We need to have a look at the MSI disable interrupt path, where we write the msg to all zeros without disabling MSI in the PCI device. Is that correct? Fixes: 52f518a3 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts" Reported-and-tested-by:
Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Reported-and-tested-by:
Foster Snowhill <forst@forstwoof.ru> Reported-by:
Matthias Prager <linux@matthiasprager.de> Reported-by:
Jason Taylor <jason.taylor@simplivity.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
commit b6140914 upstream. No user and we definitely don't want to grow one. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-2-git-send-email-hch@lst.deSigned-off-by:
-
Andrey Ryabinin authored
commit dad22328 upstream. Commit e41f501d ("vmlinux.lds: account for destructor sections") added '.text.exit' to EXIT_TEXT which is discarded at link time by default. This breaks compilation of UML: `.text.exit' referenced in section `.fini_array' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o): defined in discarded section `.text.exit' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o) Apparently UML doesn't want to discard exit text, so let's place all EXIT_TEXT sections in .exit.text. Fixes: e41f501d ("vmlinux.lds: account for destructor sections") Reported-by:
Stefan Traby <stefan@hello-penguin.com> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Hoan Tran authored
commit 2324d154 upstream. When CPPC fails to request a PCC channel, the CPC data is freed and cpc_desc_ptr points to the invalid data. Avoid this issue by moving the cpc_desc_ptr assignment after the PCC channel request. Signed-off-by:
Hoan Tran <hotran@apm.com> Acked-by:
Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Hoan Tran authored
commit 8343c40d upstream. Based on 8.4.7.1 section of ACPI 6.1 specification, if the platform supports CPPC, the _CPC object must exist under all processor objects. If cpc_desc_ptr pointer is invalid on any CPUs, acpi_get_psd_map() should return error and CPPC cpufreq driver can not be registered. Signed-off-by:
Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by:
-
Adrian Hunter authored
commit 6e1c7d61 upstream. Baytrail eMMC/SD/SDIO host controllers have been known to hang. A change to a hardware setting has been found to reduce the occurrence of such hangs. This patch ensures the correct setting. This patch applies cleanly to v4.4+. It could go to earlier kernels also, so I will send backports to the stable list in due course. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Simon Horman authored
commit c2e771b0 upstream. Like the NFP6000, the NFP4000 as an erratum where reading/writing to PCI config space addresses above 0x600 can cause the NFP to generate PCIe completion timeouts. Limit the NFP4000's PF's config space size to 0x600 bytes as is already done for the NFP6000. The NFP4000's VF is 0x6004 (PCI_DEVICE_ID_NETRONOME_NFP6000_VF), the same device ID as the NFP6000's VF. Thus, its config space is already limited by the existing use of quirk_nfp6000(). Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Simon Horman authored
commit 69874ec2 upstream. Add the device ID for the PF of the NFP4000. The device ID for the VF, 0x6003, is already present as PCI_DEVICE_ID_NETRONOME_NFP6000_VF. Signed-off-by:
-
Jason S. McMullan authored
commit 9f33a2ae upstream. The NFP6000 has an erratum where reading/writing to PCI config space addresses above 0x600 can cause the NFP to generate PCIe completion timeouts. Limit the NFP6000's config space size to 0x600 bytes. Signed-off-by:
Jason S. McMullan <jason.mcmullan@netronome.com> [simon: edited changelog] Signed-off-by:
-
Jason S. McMullan authored
commit a755e169 upstream. Device IDs for the Netronome NFP3200, NFP3240, NFP6000, and NFP6000 SR-IOV devices. Signed-off-by:
-
Jason S. McMullan authored
commit c20aecf6 upstream. If a device quirk modifies the pci_dev->cfg_size to be less than PCI_CFG_SPACE_EXP_SIZE (4096), but greater than PCI_CFG_SPACE_SIZE (256), the PCI sysfs interface truncates the readable size to PCI_CFG_SPACE_SIZE. Allow sysfs access to config space up to cfg_size, even if the device doesn't support the entire 4096-byte PCIe config space. Note that pci_read_config() and pci_write_config() limit access to dev->cfg_size even though pcie_config_attr contains 4096 (the maximum size). Signed-off-by:
-
Keith Busch authored
Commit b00a726a upstream. Unmapping the registers on reset or shutdown is not necessary. Keeping the mapping simplifies reset handling. This was backported to 4.4 stable tree because it prevents a race between the reset_work and the shutdown hook, that may provoke the Oops below, in the nvme_wait_ready function. The Oops is easily reproducible on systems that will kexec/reboot immediately after booting, which is actually the common use case for kexec based bootloaders, like Petitboot. This patch removes the unnecessary early unmapping of the PCI configuration in the shutdown hook, allowing a proper handling of the reset work. Unable to handle kernel paging request for data at address 0x0000001c Faulting instruction address: 0xd000000000720b38 cpu 0x1b: Vector: 300 (Data Access) at [c000007f7a9a38a0] pc: d000000000720b38: nvme_wait_ready+0x50/0x120 [nvme] lr: d000000000720b7c: nvme_wait_ready+0x94/0x120 [nvme] sp: c000007f7a9a3b20 msr: 9000000000009033 dar: 1c dsisr: 40000000 current = 0xc000007f7a926c80 paca = 0xc00000000fe85100 softe: 0 irq_happened: 0x01 pid = 2608, comm = kworker/27:1 enter ? for help [c000007f7a9a3bb0] d00000000072572c nvme_setup_io_queues+0xc08/0x1218 [nvme] [c000007f7a9a3c70] c00000000006bbd8 process_one_work+0x228/0x378 [c000007f7a9a3d00] c00000000006c050 worker_thread+0x2e0/0x420 [c000007f7a9a3d80] c00000000007161c kthread+0xfc/0x108 [c000007f7a9a3e30] c0000000000094b4 ret_from_kernel_thread+0x5c/0xa8 Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> [Backport to v4.4.y] Signed-off-by:
-
Takashi Iwai authored
commit a52ff34e upstream. For SKL and later Intel chips, we control the power well per codec basis via link_power callback since the commit [03b135ce: ALSA: hda - remove dependency on i915 power well for SKL]. However, there are a few exceptional cases where the gfx registers are accessed from the audio driver: namely the wakeup override bit toggling at (both system and runtime) resume. This seems causing a kernel warning when accessed during the power well down (and likely resulting in the bogus register accesses). This patch puts the proper power up / down sequence around the resume code so that the wakeup bit is fiddled properly while the power is up. (The other callback, sync_audio_rate, is used only in the PCM callback, so it's guaranteed in the power-on.) Also, by this proper power up/down, the instantaneous flip of wakeup bit in the resume callback that was introduced by the commit [033ea349: ALSA: hda - Fix Skylake codec timeout] becomes superfluous, as snd_hdac_display_power() already does it. So we can clean it up together. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214 Fixes: 03b135ce ('ALSA: hda - remove dependency on i915 power well for SKL') Cc: <stable@vger.kernel.org> # v4.2+ Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ross Zwisler authored
commit 68202c9f upstream. The "NVDIMM Block Window Driver Writer's Guide": http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf ...defines the layout of the block window status register. For the July 2016 version of the spec linked to above, this happens in Figure 4 on page 26. The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The rest of the bits in the status register are reserved, and there is a warning following the diagram that says: Note: The driver cannot assume the value of the RESERVED bits in the status register are zero. These reserved bits need to be masked off, and the driver must avoid checking the state of those bits. This change ensures that for hardware implementations that set these reserved bits in the status register, the driver won't incorrectly fail the block I/Os. Reviewed-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Adrian Hunter authored
commit 3d918fb1 upstream. In order to successfully decode Intel PT traces, context switch events are needed from the moment the trace starts. Currently that is ensured by using the 'immediate' flag which enables the switch event when it is opened. However, since commit 86c27869 ("perf intel-pt: Add support for PERF_RECORD_SWITCH") that might not always happen. When tracing system-wide the context switch event is added to the tracking event which was not set as 'immediate'. Change that so it is. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Alex Williamson authored
commit c8952a70 upstream. There are multiple cases in vfio_pci_set_ctx_trigger_single() where we assume we can safely read from our data pointer without actually checking whether the user has passed any data via the count field. VFIO_IRQ_SET_DATA_NONE in particular is entirely broken since we attempt to pull an int32_t file descriptor out before even checking the data type. The other data types assume the data pointer contains one element of their type as well. In part this is good news because we were previously restricted from doing much sanitization of parameters because it was missed in the past and we didn't want to break existing users. Clearly DATA_NONE is completely broken, so it must not have any users and we can fix it up completely. For DATA_BOOL and DATA_EVENTFD, we'll just protect ourselves, returning error when count is zero since we previously would have oopsed. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Reported-by:
Chris Thompson <the_cartographer@hotmail.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
-
Wei Yongjun authored
commit 58625edf upstream. When using the indirect buffers feature, 'desc' is allocated in virtqueue_add() but isn't freed before leaving on a ring full error, causing a memory leak. For example, it seems rather clear that this can trigger with virtio net if mergeable buffers are not used. Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Helge Deller authored
commit 3eb53b20 upstream. When building gccgo in userspace, errno.h gets parsed and the go include file sysinfo.go is generated. Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED is defined later on in errno.h, this leads to go complaining that EREFUSED isn't defined yet. Fix this trivial problem by moving the define of EREFUSED down after ECONNREFUSED in errno.h (and clean up the indenting while touching this line). Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
James Hogan authored
commit 3146bc64 upstream. AT_VECTOR_SIZE_ARCH should be defined with the maximum number of NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined for arm64 at all even though ARCH_DLINFO will contain one NEW_AUX_ENT for the VDSO address. This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for AT_BASE_PLATFORM which arm64 doesn't use, but lets define it now and add the comment above ARCH_DLINFO as found in several other architectures to remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to date. Fixes: f668cd16 ("arm64: ELF definitions") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Vittorio Gambaletta (VittGam) authored
commit 41f5e3bd upstream. The ELP HD USB Camera (05a3:9420) needs this quirk for suppressing the unsupported sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481Signed-off-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by:
-
Piotr Karasinski authored
commit 7627e40c upstream. VF0610 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x82". This patch adds the USB ID (0x041E:4080) to snd_usb_get_sample_rate_quirk() list. Signed-off-by:
Piotr Karasinski <peter.karasinski@gmail.com> Signed-off-by:
-
Andrew Donnellan authored
commit 949e9b82 upstream. In eeh_pci_enable(), after making the request to set the new options, we call eeh_ops->wait_state() to check that the request finished successfully. At the moment, if eeh_ops->wait_state() returns 0, we return 0 without checking that it reflects the expected outcome. This can lead to callers further up the chain incorrectly assuming the slot has been successfully unfrozen and continuing to attempt recovery. On powernv, this will occur if pnv_eeh_get_pe_state() or pnv_eeh_get_phb_state() return 0, which in turn occurs if the relevant OPAL call returns OPAL_EEH_STOPPED_MMIO_DMA_FREEZE or OPAL_EEH_PHB_ERROR respectively. On pseries, this will occur if pseries_eeh_get_state() returns 0, which in turn occurs if RTAS reports that the PE is in the MMIO Stopped and DMA Stopped states. Obviously, none of these cases represent a successful completion of a request to thaw MMIO or DMA. Fix the check so that a wait_state() return value of 0 won't be considered successful for the EEH_OPT_THAW_MMIO or EEH_OPT_THAW_DMA cases. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Olga Kornievskaia authored
commit 9130b8db upstream. It's possible to have simultaneous upcalls for the same UIDs but different GSS service. In that case, we need to allow for the upcall to gssd to proceed so that not the same context is used by two different GSS services. Some servers lock the use of context to the GSS service. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 1f4c17a0 upstream. If the connect attempt immediately fails with an EADDRNOTAVAIL error, then that means our choice of source port number was bad. This error is expected when we set the SO_REUSEPORT socket option and we have 2 sockets sharing the same source and destination address and port combinations. Signed-off-by:
-
Dan Williams authored
commit d8d378fa upstream. The unit tests crash when hotplug races the previous probe. This race requires that the loading of the nfit_test module be terminated with SIGTERM, and the module to be unloaded while the ars scan is still running. In contrast to the normal nfit driver, the unit test calls acpi_nfit_init() twice to simulate hotplug, whereas the nominal case goes through the acpi_nfit_notify() event handler. The acpi_nfit_notify() path is careful to flush the previous region registration before servicing the hotplug event. The unit test was missing this guarantee. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810cdce7>] pwq_activate_delayed_work+0x47/0x170 [..] Call Trace: [<ffffffff810ce186>] pwq_dec_nr_in_flight+0x66/0xa0 [<ffffffff810ce490>] process_one_work+0x2d0/0x680 [<ffffffff810ce331>] ? process_one_work+0x171/0x680 [<ffffffff810ce88e>] worker_thread+0x4e/0x480 [<ffffffff810ce840>] ? process_one_work+0x680/0x680 [<ffffffff810ce840>] ? process_one_work+0x680/0x680 [<ffffffff810d5343>] kthread+0xf3/0x110 [<ffffffff8199846f>] ret_from_fork+0x1f/0x40 [<ffffffff810d5250>] ? kthread_create_on_node+0x230/0x230 Signed-off-by:
-
Denys Vlasenko authored
commit 68187872 upstream. Since instruction decoder now supports EVEX-encoded instructions, two fixes are needed to correctly handle them in uprobes. Extended bits for MODRM.rm field need to be sanitized just like we do it for VEX3, to avoid encoding wrong register for register-relative access. EVEX has _two_ extended bits: b and x. Theoretically, EVEX.x should be ignored by the CPU (since GPRs go only up to 15, not 31), but let's be paranoid here: proper encoding for register-relative access should have EVEX.x = 1. Secondly, we should fetch vex.vvvv for EVEX too. This is now super easy because instruction decoder populates vex_prefix.bytes[2] for all flavors of (e)vex encodings, even for VEX2. Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Fixes: 8a764a87 ("x86/asm/decoder: Create artificial 3rd byte for 2-byte VEX") Link: http://lkml.kernel.org/r/20160811154521.20469-1-dvlasenk@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 5cf0791d upstream. There's a subtle preemption race on UP kernels: Usually current->mm (and therefore mm->pgd) stays the same during the lifetime of a task so it does not matter if a task gets preempted during the read and write of the CR3. But then, there is this scenario on x86-UP: TaskA is in do_exit() and exit_mm() sets current->mm = NULL followed by: -> mmput() -> exit_mmap() -> tlb_finish_mmu() -> tlb_flush_mmu() -> tlb_flush_mmu_tlbonly() -> tlb_flush() -> flush_tlb_mm_range() -> __flush_tlb_up() -> __flush_tlb() -> __native_flush_tlb() At this point current->mm is NULL but current->active_mm still points to the "old" mm. Let's preempt taskA _after_ native_read_cr3() by taskB. TaskB has its own mm so CR3 has changed. Now preempt back to taskA. TaskA has no ->mm set so it borrows taskB's mm and so CR3 remains unchanged. Once taskA gets active it continues where it was interrupted and that means it writes its old CR3 value back. Everything is fine because userland won't need its memory anymore. Now the fun part: Let's preempt taskA one more time and get back to taskB. This time switch_mm() won't do a thing because oldmm (->active_mm) is the same as mm (as per context_switch()). So we remain with a bad CR3 / PGD and return to userland. The next thing that happens is handle_mm_fault() with an address for the execution of its code in userland. handle_mm_fault() realizes that it has a PTE with proper rights so it returns doing nothing. But the CPU looks at the wrong PGD and insists that something is wrong and faults again. And again. And one more time… This pagefault circle continues until the scheduler gets tired of it and puts another task on the CPU. It gets little difficult if the task is a RT task with a high priority. The system will either freeze or it gets fixed by the software watchdog thread which usually runs at RT-max prio. But waiting for the watchdog will increase the latency of the RT task which is no good. Fix this by disabling preemption across the critical code section. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1470404259-26290-1-git-send-email-bigeasy@linutronix.de [ Prettified the changelog. ] Signed-off-by:
-
Kirill A. Shutemov authored
commit c17b1f42 upstream. We account HugeTLB's shared page table to all processes who share it. The accounting happens during huge_pmd_share(). If somebody populates pud entry under us, we should decrease pagetable's refcount and decrease nr_pmds of the process. By mistake, I increase nr_pmds again in this case. :-/ It will lead to "BUG: non-zero nr_pmds on freeing mm: 2" on process' exit. Let's fix this by increasing nr_pmds only when we're sure that the page table will be used. Link: http://lkml.kernel.org/r/20160617122506.GC6534@node.shutemov.name Fixes: dc6c9a35 ("mm: account pmd page tables to the process") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
zhongjiang <zhongjiang@huawei.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 20 Aug, 2016 6 commits
-
-
Greg Kroah-Hartman authored
-
Ben Hutchings authored
commit b8612e51 upstream. Signing a module should only make it trusted by the specific kernel it was built for, not anything else. If a module signing key is used for multiple ABI-incompatible kernels, the modules need to include enough version information to distinguish them. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Ben Hutchings authored
commit bca014ca upstream. Signing a module should only make it trusted by the specific kernel it was built for, not anything else. Loading a signed module meant for a kernel with a different ABI could have interesting effects. Therefore, treat all signatures as invalid when a module is force-loaded. Signed-off-by:
-
Mike Snitzer authored
commit 99f3c90d upstream. When the corrupt_bio_byte feature was introduced it caused READ bios to no longer be errored with -EIO during the down_interval. This had to do with the complexity of needing to submit READs if the corrupt_bio_byte feature was used. Fix it so READ bios are properly errored with -EIO; doing so early in flakey_map() as long as there isn't a match for the corrupt_bio_byte feature. Fixes: a3998799 ("dm flakey: add corrupt_bio_byte feature") Reported-by:
Akira Hayakawa <ruby.wktk@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Alim Akhtar authored
commit 70c96dfa upstream. As per code flow s3c_rtc_setfreq() will get called with rtc clock disabled and in set_freq we perform h/w registers read/write, which results in a kernel crash on exynos7 platform while probing rtc driver. Below is code flow: s3c_rtc_probe() clk_prepare_enable(info->rtc_clk) // rtc clock enabled s3c_rtc_gettime() // will enable clk if not done, and disable it upon exit s3c_rtc_setfreq() //then this will be called with clk disabled This patch take cares of such issue by adding s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq(). Fixes: 24e14554 ("drivers/rtc/rtc-s3c.c: delete duplicate clock control") Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
Pankaj Dubey <pankaj.dubey@samsung.com> Tested-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
commit 05a05872 upstream. The lpfc_sli4_scmd_to_wqidx_distr() function expects the scsi_cmnd 'lpfc_cmd->pCmd' not to be null, and point to the midlayer command. That's not true in the .eh_(device|target|bus)_reset_handler path, because lpfc_send_taskmgmt() sends commands not from the midlayer, so does not set 'lpfc_cmd->pCmd'. That is true in the .queuecommand path because lpfc_queuecommand() stores the scsi_cmnd from midlayer in lpfc_cmd->pCmd; and lpfc_cmd is stored by lpfc_scsi_prep_cmnd() in piocbq->context1 -- which is passed to lpfc_sli4_scmd_to_wqidx_distr() as lpfc_cmd parameter. This problem can be hit on SCSI EH, and immediately with sg_reset. These 2 test-cases demonstrate the problem/fix with next-20160601. Test-case 1) sg_reset # strace sg_reset --device /dev/sdm <...> open("/dev/sdm", O_RDWR|O_NONBLOCK) = 3 ioctl(3, SG_SCSI_RESET, 0x3fffde6d0994 <unfinished ...> +++ killed by SIGSEGV +++ Segmentation fault # dmesg Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd00000001c88442c Oops: Kernel access of bad area, sig: 11 [#1] <...> CPU: 104 PID: 16333 Comm: sg_reset Tainted: G W 4.7.0-rc1-next-20160601-00004-g95b89dc #6 <...> NIP [d00000001c88442c] lpfc_sli4_scmd_to_wqidx_distr+0xc/0xd0 [lpfc] LR [d00000001c826fe8] lpfc_sli_calc_ring.part.27+0x98/0xd0 [lpfc] Call Trace: [c000003c9ec876f0] [c000003c9ec87770] 0xc000003c9ec87770 (unreliable) [c000003c9ec87720] [d00000001c82e004] lpfc_sli_issue_iocb+0xd4/0x260 [lpfc] [c000003c9ec87780] [d00000001c831a3c] lpfc_sli_issue_iocb_wait+0x15c/0x5b0 [lpfc] [c000003c9ec87880] [d00000001c87f27c] lpfc_send_taskmgmt+0x24c/0x650 [lpfc] [c000003c9ec87950] [d00000001c87fd7c] lpfc_device_reset_handler+0x10c/0x200 [lpfc] [c000003c9ec87a10] [c000000000610694] scsi_try_bus_device_reset+0x44/0xc0 [c000003c9ec87a40] [c0000000006113e8] scsi_ioctl_reset+0x198/0x2c0 [c000003c9ec87bf0] [c00000000060fe5c] scsi_ioctl+0x13c/0x4b0 [c000003c9ec87c80] [c0000000006629b0] sd_ioctl+0xf0/0x120 [c000003c9ec87cd0] [c00000000046e4f8] blkdev_ioctl+0x248/0xb70 [c000003c9ec87d30] [c0000000002a1f60] block_ioctl+0x70/0x90 [c000003c9ec87d50] [c00000000026d334] do_vfs_ioctl+0xc4/0x890 [c000003c9ec87de0] [c00000000026db60] SyS_ioctl+0x60/0xc0 [c000003c9ec87e30] [c000000000009120] system_call+0x38/0x108 Instruction dump: <...> With fix: # strace sg_reset --device /dev/sdm <...> open("/dev/sdm", O_RDWR|O_NONBLOCK) = 3 ioctl(3, SG_SCSI_RESET, 0x3fffe103c554) = 0 close(3) = 0 exit_group(0) = ? +++ exited with 0 +++ # dmesg [ 424.658649] lpfc 0006:01:00.4: 4:(0):0713 SCSI layer issued Device Reset (1, 0) return x2002 Test-case 2) SCSI EH Using this debug patch to wire an SCSI EH trigger, for lpfc_scsi_cmd_iocb_cmpl(): - cmd->scsi_done(cmd); + if ((phba->pport ? phba->pport->cfg_log_verbose : phba->cfg_log_verbose) == 0x32100000) + printk(KERN_ALERT "lpfc: skip scsi_done()\n"); + else + cmd->scsi_done(cmd); # echo 0x32100000 > /sys/class/scsi_host/host11/lpfc_log_verbose # dd if=/dev/sdm of=/dev/null iflag=direct & <...> After a while: # dmesg lpfc 0006:01:00.4: 4:(0):3053 lpfc_log_verbose changed from 0 (x0) to 839909376 (x32100000) lpfc: skip scsi_done() <...> Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd0000000199e448c Oops: Kernel access of bad area, sig: 11 [#1] <...> CPU: 96 PID: 28556 Comm: scsi_eh_11 Tainted: G W 4.7.0-rc1-next-20160601-00004-g95b89dc #6 <...> NIP [d0000000199e448c] lpfc_sli4_scmd_to_wqidx_distr+0xc/0xd0 [lpfc] LR [d000000019986fe8] lpfc_sli_calc_ring.part.27+0x98/0xd0 [lpfc] Call Trace: [c000000ff0d0b890] [c000000ff0d0b900] 0xc000000ff0d0b900 (unreliable) [c000000ff0d0b8c0] [d00000001998e004] lpfc_sli_issue_iocb+0xd4/0x260 [lpfc] [c000000ff0d0b920] [d000000019991a3c] lpfc_sli_issue_iocb_wait+0x15c/0x5b0 [lpfc] [c000000ff0d0ba20] [d0000000199df27c] lpfc_send_taskmgmt+0x24c/0x650 [lpfc] [c000000ff0d0baf0] [d0000000199dfd7c] lpfc_device_reset_handler+0x10c/0x200 [lpfc] [c000000ff0d0bbb0] [c000000000610694] scsi_try_bus_device_reset+0x44/0xc0 [c000000ff0d0bbe0] [c0000000006126cc] scsi_eh_ready_devs+0x49c/0x9c0 [c000000ff0d0bcb0] [c000000000614160] scsi_error_handler+0x580/0x680 [c000000ff0d0bd80] [c0000000000ae848] kthread+0x108/0x130 [c000000ff0d0be30] [c0000000000094a8] ret_from_kernel_thread+0x5c/0xb4 Instruction dump: <...> With fix: # dmesg lpfc 0006:01:00.4: 4:(0):3053 lpfc_log_verbose changed from 0 (x0) to 839909376 (x32100000) lpfc: skip scsi_done() <...> lpfc 0006:01:00.4: 4:(0):0713 SCSI layer issued Device Reset (0, 0) return x2002 <...> lpfc 0006:01:00.4: 4:(0):0723 SCSI layer issued Target Reset (1, 0) return x2002 <...> lpfc 0006:01:00.4: 4:(0):0714 SCSI layer issued Bus Reset Data: x2002 <...> lpfc 0006:01:00.4: 4:(0):3172 SCSI layer issued Host Reset Data: <...> Fixes: 8b0dff14 ("lpfc: Add support for using block multi-queue") Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
