- 30 Dec, 2008 40 commits
-
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Kuninori Morimoto authored
priv->scale is checked in start_capture. Therefore, it should be NULL if failing in set_fmt. This patch resolve this problem. Signed-off-by:
-
Kuninori Morimoto authored
This patch adds tw9910 driver that use soc_camera framework. It was tested on SH Migo-r board and mplayer. create mode 100644 drivers/media/video/tw9910.c create mode 100644 include/media/tw9910.h Signed-off-by:
-
Guennadi Liakhovetski authored
In preparation for i.MX31 camera host driver add flags for 4 and 15 bit bus widths and for data lines polarity inversion. Signed-off-by:
Guennadi Liakhovetski <lg@denx.de> Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
sh_mobile_ceu_camera.c is already prepared to support interlaced format, this patch moves the choice of a field type down to host and / or camera drivers. Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
Magnus Damm <damm@igel.co.jp> Signed-off-by:
-
Magnus Damm authored
This patch cleans up the sh_mobile_ceu driver and adds comments and constants to clarify the magic sequence in sh_mobile_ceu_capture(). Signed-off-by:
-
Kuninori Morimoto authored
This patch presents new method to be able to select V4L2 input type Signed-off-by:
-
Kuninori Morimoto authored
This patch presents new method to be able to check v4l2_std_id Signed-off-by:
-
Magnus Damm authored
This patch adds NV16/NV61 support to the sh_mobile_ceu driver. Signed-off-by:
-
Magnus Damm authored
This patch adds NV12/NV21 support to the sh_mobile_ceu driver. Signed-off-by:
-
Guennadi Liakhovetski authored
Move mutex from host drivers to camera device object, take into account videobuf locking. Signed-off-by:
-
Guennadi Liakhovetski authored
With the introduction of the format conversion support in soc-camera, we now also have to take care to pass the correct pixel format to the camera driver when calling its try_fmt() method. Signed-off-by:
-
Guennadi Liakhovetski authored
Simplify multiple drivers by replacing f->fmt.pix.* with a single pointer dereference, merge some needlessly broken lines, verify host and camera operations pointers on registration. Signed-off-by:
-
Magnus Damm authored
This patch converts the sh_mobile_ceu driver to make use of the new pixel format translation code. Only pass-though mode at this point. Signed-off-by:
-
Magnus Damm authored
This patch adds support for NV16 and NV61 pixel formats. These pixel formats use two planes; one for 8-bit Y values and one for interleaved 8-bit U and V values. NV16/NV61 formats are very similar to NV12/NV21 with the exception that NV16/NV61 are using the same number of lines for both planes. The difference between NV16 and NV61 is the U and V byte order. The fourcc values are extrapolated from the NV12/NV21 case. Signed-off-by:
-
Mike Rapoport authored
Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
-
Mike Rapoport authored
The chip is largely compatible with MT9M111 and is going to be supported by the same driver. Signed-off-by:
-
Guennadi Liakhovetski authored
Using PXA270's FIFO inactivity time-out register (CITOR) reduces FIFO overruns. The time-out is calculated in CICLK / LCDCLK ticks and has to be longer than one pixel time. For this we have to know the pixel clock frequency, which usually is provided by the camera. We use the struct soc_camera_sense to request PCLK frequency from the camera driver upon each data format change. Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Guennadi Liakhovetski authored
Add a struct soc_camera_sense, that can be used by camera host drivers to request additional information from a camera driver, for example, when changing data format. This struct can be extended in the future, its first use is to request the camera driver whether the pixel-clock frequency has changed. Tested-by:
-
Robert Jarzmik authored
Signed-off-by:
-
Guennadi Liakhovetski authored
As reported by Antonio Ospite <ospite@studenti.unina.it> two platforms with a mt9m111 camera require opposite pixel clock polarity, which means one of them inverts it. This patch adds support for inversion flags and switches all available camera drivers to using them. Signed-off-by:
-
Eric Miao authored
Signed-off-by:
Eric Miao <eric.miao@marvell.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
"static" on stv06xx for all static functions and parameters to avoid such troubles. Cc: Erik Andren <erik.andren@gmail.com> Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Testing for non-NULL platform-data is not enough, we have to check if the GPIO in the platform data is valid or not. Also see my earlier patch: [ARM] pxa/pcm990: use negative number for an invalid GPIO in camera data Signed-off-by:
-
Robert Jarzmik authored
The Micron mt9m111 offers 4 byte orders for YCbCr output. This patchs adds all possible outputs capabilities to the mt9m111 driver. Signed-off-by:
-
roel kluin authored
unsigned >= 0 is always true and fix formula Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
-
Alexey Klimov authored
Patch replace return -1; with return retval; in 3 functions. And we also change if-checks for this returned values. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
-
Alexey Klimov authored
Due to a lot of patches for dsbr100 last time we should update version of driver. Signed-off-by:
-
Alexey Klimov authored
Fix and add right comments. Few empty lines removed. Signed-off-by:
-
Alexey Klimov authored
We should use dev_err (not dev_warn) if video_register_device fails. Signed-off-by:
-
Alexey Klimov authored
We should make if-constructions more clear. Introduce int retval variables in some functions to make it this way. Also a lot of useful dev_err messages added. And now we check every returned value after usb_control_msg. Signed-off-by:
-
Alexey Klimov authored
Remove printk in one line and place dev_warn there. Signed-off-by:
-
Douglas Schilling Landgraf authored
Added snapshot feature for Pixelview Prolink PlayTV USB 2.0 Signed-off-by:
-
