- 20 Apr, 2015 9 commits
-
-
Tvrtko Ursulin authored
commit ae6c4806 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Aug 6 15:04:53 2014 +0200 drm/i915: Only track real ppgtt for a context Changed the code but didn't update kerneldoc. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: "Thierry, Michel" <michel.thierry@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Since commit bf3d149b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Feb 14 14:01:12 2014 +0100 drm/i915: split PIN_GLOBAL out from PIN_MAPPABLE i915_gem_obj_ggtt_pin always binds into the ggtt, but I've forgotten to remove the now redundant additional bind call later on. Fix this up. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Daniel Vetter authored
PIN_GLOBAL is set only when userspace asked for it, and that is only the case for the gen6 PIPE_CONTROL workaround. We're not allowed to just clear this. The important part of the fallback is to drop the restriction to the mappable range. This issue has been introduced in commit edf4427b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jan 14 11:20:56 2015 +0000 drm/i915: Fallback to using CPU relocations for large batch buffers v2: Chris pointed out that we also miss to set PIN_GLOBAL when the buffer is already bound. Fix this up too. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniel Vetter authored
It's only used as a flag there, so unconfuse things a bit. Also separate the bind_vma flag space from the pte_encode flag space in the code. Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
Daniel Vetter authored
With the dynamic pagetable alloc code aliasing ppgtt special-cases where again mixed in all over the place with the low-level init code. Extract the va preallocation and clearing again into the common code where aliasing ppgtt gets set up. Note that with this we don't set the size of the aliasing ppgtt to the size of the parent ggtt address space. Which isn't required at all since except for the ppgtt setup/cleanup code no one ever looks at this. Reviewed-by:
-
Daniel Vetter authored
While at it inline the free functions - they don't actually free the ppgtt, just clean up the allocations done for it. Reviewed-by:
-
Daniel Vetter authored
They change with the address space and not with each vma, so move them into the right pile of vfuncs. Save 2 pointers per vma and clarifies the code. Reviewed-by:
-
Daniel Vetter authored
Reviewed-by:
-
Tvrtko Ursulin authored
Purpose of this tracking is to know when to flush the cache between the CPU and the non-coherent display engine. Prior to: commit 121920fa Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Mon Mar 23 11:10:37 2015 +0000 drm/i915/skl: Query display address through a wrapper This worked by a mix of direct flag manipulation and checking for existence of a pinned GGTT VMA. With the introduction of rotated display mappings this approach is no longer correct. New simpler approach is to just keep this count over calls which pin and unpin objects to and from display, at the slight cost of extra space in every bo. (Inspired and extracted code from a larger rework by Chris Wilson.) v2: Remove the limit since it is not well defined. (Chris Wilson, Ville Syrjälä) v3: Commit message corrections. (Chris Wilson) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
- 16 Apr, 2015 31 commits
-
-
Wei Yongjun authored
Remove duplicated include. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Deepak S authored
After feedback from the hardware team we are changing the RC6 promotional timer to increase the power saving without changing performance. Signed-off-by:
Deepak S <deepak.s@linux.intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Todd Previte authored
The Displayport Link Layer Compliance Testing Specification 1.2 rev 1.1 specifies that repeated AUX transactions after a failure (no response / invalid response) must have a minimum delay of 400us before the resend can occur. Tests 4.2.1.1 and 4.2.1.2 are two tests that require this specifically. Also, the check for DP_AUX_CH_CTL_TIME_OUT_ERROR has been moved out into a separate case. This case just continues with the next iteration of the loop as the HW has already waited the required amount of time. V2: - Changed udelay() to usleep_range() V3: - Removed extraneous check for timeout - Updated comment to reflect this change V4: - Reformatted a comment V5: - Added separate check for HW timeout on AUX transactions. A message is logged upon detection of this case. V6: - Add continue statement to HW timeout detect case - Remove the log message indicating a timeout has been detected (review feedback) V7: - Updated the commit message to remove verbage about the HW timeout case that is no longer valid. Signed-off-by:
Todd Previte <tprevite@gmail.com> Reviewed-by:
-
Todd Previte authored
Add the skeleton framework for supporting automation for Displayport compliance testing. This patch adds the necessary framework for the source device to appropriately respond to test automation requests from a sink device. V2: - Addressed previous mailing list feedback - Fixed compilation issue (struct members declared in a later patch) - Updated debug messages to be more accurate - Added status checks for the DPCD read/write calls - Removed excess comments and debug messages - Fixed debug message compilation warnings - Fixed compilation issue with missing variables - Updated link training autotest to ACK V3: - Fixed the checks on the DPCD return code to be <= 0 rather than != 0 - Removed extraneous assignment of a NAK return code in the DPCD read failure case - Changed the return in the DPCD read failure case to a goto to the exit point where the status code is written to the sink - Removed FAUX test case since it's deprecated now - Removed the compliance flag assignment in handle_test_request V4: - Moved declaration of type_type here - Removed declaration of test_data (moved to a later patch) - Added reset to 0 for compliance test variables V5: - Moved test_active variable declaration and initialization out of this patch and into the patch where it's used - Changed variable name compliance_testing_active to compliance_test_active to unify the naming convention - Added initialization for compliance_test_type variable Signed-off-by:
-
kbuild test robot authored
drivers/gpu/drm/i915/i915_debugfs.c:4850:2-3: Unneeded semicolon Removes unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Daniel Vetter authored
intel_ is for generic code bxt_ and friends for platform specific functions. Remove the intel_ prefix to be consistent with our naming. Random OCD bikeshed I've spotted while merging bxt patches. v2: Oops, git add fail. Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Vandana Kannan authored
Broxton supports 3 voltage swing levels on all DP ports. Max level of pre-emphasis will be taken care with the existing code. v2: Patch rebased v3: (imre) - keep existing behavior for other platforms - clarify commit message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v2) Signed-off-by:
Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by:
-
Vandana Kannan authored
VSwing programming sequence as specified in the updated BXT BSpec v2: Satheesh's review comments addressed. - clear value before setting into registers - move print statement to bxt function Other changes - since signal level will not be set into DDI_BUF_CTL, the value need not be returned to intel_dp_set_signal_levels(). Making the bxt specific function to return void and setting signal_levels = 0 for bxt inside intel_dp_set_signal_levels() - instead of signal levels, printing vswing level and pre-emphasis level - in case none of the pre-emphasis levels or vswing levels are set, setting default of 400mV + 0dB v3: Satheesh's review comments - Check for mask before printing signal_levels. - Removing redundant register writes - Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT - Making register write part generic as it will be required for HDMI as well. Re-structure the code to include an array for vswing related values, set signal levels v4: Satheesh's review comments - Rebase over latest renaming patches - use hsw_signal_levels for HAS_DDI Other changes - Modified vswing_sequence() func definition - Rebased on top of register macro definitions v5: Satheesh's review comments - Check ddi translation table size v6: Imre's review comments - removed comments in vswing sequence - added vswing, pre-emphasis prints in intel_dp_set_signal_levels - added comment explaining use of DP vswing values for eDP - initialize n_entries and ddi_transaltion table based on encoder type - create bxt_ddi_buf_trans structure and use decimal values - adding a flag in bxt buffer translation table to indicate def entry v7: (imre) - squash in Vandana's "VSwing register definition", "HDMI VSwing programming", "Re-enable vswing programming", "Fix vswing sequence" patches - use BXT_PORT_* regs directly instead of via a temp var - simplify BXT_PORT_* macro definitions - add code comment why we read lane while write group registers - fix readout of DP_TRAIN_PRE_EMPHASIS in debug message Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6) Signed-off-by:
-
Damien Lespiau authored
We don't actually need to write the HDMI entry on DDIs that have no chance to be used as HDMI ports. While this patch shouldn't change the current behaviour, it makes further enabling work easier as we'll have an eDP table filling the full 10 entries. v2: Rely on the logic from intel_ddi_init() to figure out if the DDI port supports HDMI or not (Paulo). Suggested-by:Satheeshakrishna M <satheeshakrishna.m@intel.com> Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Reviewed-by:
-
Damien Lespiau authored
Not every DDIs is necessarily connected can be strapped off and, in the future, we'll have platforms with a different number of default DDI ports. So, let's only call intel_prepare_ddi_buffers() on DDI ports that are actually detected. We also use the opportunity to give a struct intel_digital_port to intel_prepare_ddi_buffers() as we'll need it in a following patch to query if the port supports HMDI or not. On my HSW machine this removes the initialization of a couple of (unused) DDIs. Signed-off-by:
-
Imre Deak authored
The checks for PLL enabled state on CPU ports are valid only on GMCH platforms but atm we'd also call them on non-PCH-split/non-GMCH platforms like BXT, triggering false warnings. Until the proper check is implented for these platforms simply disable the check. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Satheeshakrishna M authored
Add placeholder function for calculating programmed pixel clock. Note: Formula to back calculate link clock from dividers not available currently. v2: - rebased on upstream s/crtc_config/crtc_state/ change (imre) Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v1) Signed-off-by:
-
Satheeshakrishna M authored
Determine PLL attached to pipe (which is same as DDI PLL) v2: - rebased on upstream s/crtc_config/crtc_state/ (imre) Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v1) Signed-off-by:
-
Satheeshakrishna M authored
Assign PLL for pipe (dependent on port attached to the pipe) v2: - fix incorrect encoder vs. new_encoder check for crtc (imre) v3: - warn and return error if no encoder is attached (imre) Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v2) Signed-off-by:
-
Satheeshakrishna M authored
Calculate and cache clock parameters. Follow bspec algorithm for HDMI. Use precalculated values for DisplayPort linkrates. v2: (imre) - rebase against upstream crtc_state change - use the existing CHV based helper instead of handrolling the same Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v1) Signed-off-by:
-
Imre Deak authored
Signed-off-by:
-
Satheeshakrishna M authored
Plug bxt PLL code into existing shared DPLL framework. v2: (imre) - squash in Satheeshakrishna's "Define BXT clock registers" and "Add state variables for bxt clock registers" patches - squash in Vandanas's "Change grp access to lane access for PLL" - fix group vs. lane access in bxt_ddi_pll_get_hw_state - add code comment why we read from lane registers while writing to group registers - clean up register macros - use BXT_PORT_PLL_* macros instead of open-coding the same - check if BXT_PORT_PCS_DW12_LN01 matches BXT_PORT_PCS_DW12_LN23 during hardware state readout - add missing LANESTAGGER_STRAP_OVRD masking - add note about missing step according to the latest BUN for PORT_PLL_9/lockthresh Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v1) Signed-off-by:
-
Jesse Barnes authored
Broxton has the same panel fitter registers as Skylake. v2: - add MISSING_CASE for future platforms (daniel) Signed-off-by:
Sagar Kamble <sagar.a.kamble@intel.com> Signed-off-by:
-
Satheeshakrishna M authored
PORT_CLK_SEL programming is needed only on HSW/BDW. v2: - don't program PORT_CLK_SEL from mst encoders either (imre) v3: - fix the check for GEN9+ in intel_mst_pre_enable_dp() (damien) Signed-off-by:
-
Jesse Barnes authored
Same as IBX and G4x, they all share the same genetic material. v2: we all need a bit more port in our lives Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Chris Wilson authored
Since the pin_ioctl is defunct, we only care about whether an object is pinned into the display for debug purposes. Signed-off-by:
-
Chris Wilson authored
Since the removal of the user pin_ioctl, the only means for pinning an object is either through binding to the scanout or during execbuf reservation. As the later prevents a call to set-tiling, we need only check if the obj is pinned into the display plane to see if we need reject the set-tiling ioctl. Signed-off-by:
-
Sonika Jindal authored
The HDMI translation table is added back to bspec, so adding it, and defaulting the 800mV+0dB entry. The HDMI translation table was removed by following commit as per HW team's recommendation: commit 7ff44670 ("drm/i915/skl: Only use the 800mV+2bB HDMI translation entry") v2: Adding reference to commit which removed this table (Jani) Cc: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Sonika Jindal <sonika.jindal@intel.com> Reviewed-by:
-
Daniel Vetter authored
This is a separate patch to simplify conflict handling with other ongoing atomic work. Signed-off-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by:
-
Daniel Vetter authored
Since universal planes the primary plane might not be around, and it's kinda silly to restrict the pipe bpp to the primary plane if we might end up displaying a 10bpc video overlay. And with atomic we might very well enable a pipe without a primary plane. So just use the platform max as a starting point and then restrict appropriately. Of course this is all still a bit moot as long as we artificially compress everything to max 8bpc because we don't use the hi-bpc gamma tables. Signed-off-by:
-
Tvrtko Ursulin authored
One month passed between posting a patch and it getting merged, and unfortunately even though it still applies, it needs fixing to account for changes in function parameters since: commit d385612e15b8b6eb3db328d83f1872ef8a381788 Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Tue Mar 17 14:45:29 2015 +0000 drm/i915: Log view type when printing warnings Signed-off-by: -
Suketu Shah authored
Add triggers for DC9 as per details provided in bxt_enable_dc9 and bxt_disable_dc9 implementations. v1: - Add SKL check in gen9_disable_dc5 as it is possible for DC5 to remain disabled only for SKL. - Add additional checks for whether DC5 is already disabled during DC5-disabling only for BXT. v2: - rebase to latest. - Load CSR during DC9 disabling in the beginning before DC9 is disabled. - Make gen9_disable_dc5 function non-static as it's being called by functions in i915_drv.c. - Enable DC9-related functionality using a macro. v3: (imre) - remove BXT_ENABLE_DC9, we want DC9 always, and it's only valid on BXT - remove DC5 disabling and CSR FW loaded check, these are nop atm - squash in Vandana's "Do ddi_phy_init always" patch v4: - add TODO to re-enable DC5 during resume if CSR FW is available (sagar) Signed-off-by:
Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> (v2) Signed-off-by:
-
A.Sunil Kamath authored
v2: Modified as per review comments from Imre - Mention enabling instead of allowing in the debug trace and remove unnecessary comments. v3: - Rebase to latest. - Move DC9-related functions from intel_display.c to intel_runtime_pm.c. v4: (imre) - remove DC5 disabling, it's a nop at this point - squashed in Suketu's "Assert the requirements to enter or exit DC9" patch - remove check for RUNTIME_PM from assert_can_enable_dc9, it's not a dependency Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> (v3) Signed-off-by:
-
Imre Deak authored
Extend the VLV/CHV DPIO (PHY) documentation with the BXT specifics. v2: - add more detail about the mapping between ports and transcoders (ville) Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Vandana Kannan authored
Add PHY specific display initialization sequence as per BSpec. Note that the PHY initialization/uninitialization are done at their current place only for simplicity, in a future patch - when more of the runtime PM features will be enabled - these will be moved to power well#1 and modeset encoder enabling/disabling hooks respectively. The call to uninitialize the PHY during system/runtime suspend will be added later in this patchset. v1: Added function definitions in header files v2: Imre's review comments addressed - Moved CDCLK related definitions to i915_reg.h - Removed defintions for CDCLK frequency - Split uninit_cdclk() by adding a phy_uninit function - Calculate freq and decimal based on input frequency - Program SSA precharge based on input frequency - Use wait_for 1ms instead 200us udelay for DE PLL locking - Removed initial value for divider, freq, decimal, ratio. - Replaced polling loops with wait_for - Parameterized latency optim setting - Fix the parts where DE PLL has to be disabled. - Call CDCLK selection from mode set v3: (imre) - add note about the plan to move the cdclk/phy init to a better place - take rps.hw_lock around pcode access - fix DDI PHY timeout value - squash in Vandana's "PORT_CL2CM_DW6_A BUN fix", "DDI PHY programming register defn", "Do ddi_phy_init always", - move PHY register macros next to the corresponding CHV/VLV macros - move DE PLL register macros here from another patch since they are used here first - add BXT_ prefix to CDCLK flags - s/COMMON_RESET/COMMON_RESET_DIS/ and clarify related code comments - fix incorrect read value for the RMW of BXT_PHY_CTL_FAMILY_DDI - fix using GT_DISPLAY_EDP_POWER_ON vs. GT_DISPLAY_DDI_POWER_ON when powering on DDI ports - fix incorrect port when setting BXT_PORT_TX_DW14_LN for DDI ports - add missing masking when programming CDCLK_FREQ_DECIMAL - add missing powering on for DDI-C port, rename OCL2_LDOFUSE_PWR_EN to OCL2_LDOFUSE_PWR_DIS to reduce confusion - add note about mismatch with bspec in the PORT_REF_DW6 fields - factor out PHY init code to a new function, so we can call it for PHY1 and PHY0, instead of open-coding the same v4: (ville) - split the CDCLK/PHY parts into two patches, update commit message accordingly - use the existing dpio_phy enum instead of adding a new one for the same purpose - flip the meaning of PHYs so that PHY_A is PHY1 and PHY_BC is PHY0 to better match CHV - s/BXT_PHY/_BXT_PHY/ - use _PIPE for _BXT_PHY instead of open-coding it - drop _0_2_0_GTTMMADR suffix from BXT_P_CR_GT_DISP_PWRON - define GT_DISPLAY_POWER_ON in a more standard way - make a note that the CHV ConfigDB also disagrees about GRC_CODE field definitions - fix lane optimization refactoring fumble from v3 - add per PHY uninit functions to match the init counterparts Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v2) Signed-off-by:
-
Vandana Kannan authored
Add CDCLK specific display clock initialization sequence as per BSpec. Note that the CDCLK initialization/uninitialization are done at their current place only for simplicity, in a future patch - when more of the runtime PM features will be enabled - these will be moved to power well#1 and modeset encoder enabling/disabling hooks respectively. This also means that atm dynamic power gating power well #1 is effectively disabled. The call to uninitialize CDCLK during system/runtime suspend will be added later in this patchset. v1: Added function definitions in header files v2: Imre's review comments addressed - Moved CDCLK related definitions to i915_reg.h - Removed defintions for CDCLK frequency - Split uninit_cdclk() by adding a phy_uninit function - Calculate freq and decimal based on input frequency - Program SSA precharge based on input frequency - Use wait_for 1ms instead 200us udelay for DE PLL locking - Removed initial value for divider, freq, decimal, ratio. - Replaced polling loops with wait_for - Parameterized latency optim setting - Fix the parts where DE PLL has to be disabled. - Call CDCLK selection from mode set v3: (imre) - add note about the plan to move the cdclk/phy init to a better place - take rps.hw_lock around pcode access - move DE PLL register macros here from another patch since they are used here first - add BXT_ prefix to CDCLK flags - add missing masking when programming CDCLK_FREQ_DECIMAL v4: (ville) - split the CDCLK/PHY parts into two patches, update commit message accordingly - s/DISPLAY_PCU_CONTROL/HSW_PCODE_DE_WRITE_FREQ_REQ/ - simplify BXT_DE_PLL_RATIO macros - fix BXT_DE_PLL_RATIO_MASK - s/bxt_select_cdclk_freq/broxton_set_cdclk_freq/ - move cdclk init/uninit/set code from intel_ddi.c to intel_display.c - remove redundant code comments for broxton_set_cdclk_freq() - sanitize fixed point<->integer frequency value conversion - use DRM_ERROR instead of WARN - do RMW when programming BXT_DE_PLL_CTL for safety - add note about PLL lock timeout being exactly 200us - make PCU error messages more descriptive - instead of using 0 freq to mean PLL off/bypass freq use 19200 for clarity, as the latter one is the actual rate - simplify pcode programming, removing duplicated sandybridge_pcode_write() call - sanitize code flow, remove unnecessary scratch vars in broxton_set_cdclk() (imre) - Remove bound check for maxmimum freq to match current code. This check will be added later at a more proper platform independent place once atomic support lands. - add note to remove freq guard band which isn't needed on BXT - add note to reduce freq to minimum if no pipe is enabled - combine broxton_modeset_global_pipes() with valleyview_modeset_global_pipes() Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v2) Signed-off-by:
-
