- 16 Sep, 2024 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC updates from Borislav Petkov: - Drop a now obsolete ppc4xx_edac driver - Fix conversion to physical memory addresses on Intel's Elkhart Lake and Ice Lake hardware when the system address is above the (Top-Of-Memory) TOM address - Pay attention to the memory hole on Zynq UltraScale+ MPSoC DDR controllers when injecting errors for testing purposes - Add support for translating normalized error addresses reported by an AMD memory controller into system physical addresses using an UEFI mechanism called platform runtime mechanism (PRM). - The usual cleanups and fixes * tag 'edac_updates_for_v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC: Drop obsolete PPC4xx driver EDAC/sb_edac: Fix the compile warning of large frame size EDAC/{skx_common,i10nm}: Remove the AMAP register for determing DDR5 EDAC/{skx_common,skx,i10nm}: Move the common debug code to skx_common EDAC/igen6: Fix conversion of system address to physical memory address EDAC/synopsys: Fix error injection on Zynq UltraScale+ RAS/AMD/ATL: Translate normalized to system physical addresses using PRM ACPI: PRM: Add PRM handler direct call support
-
git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linuxLinus Torvalds authored
Pull ARM updates from Russell King: - clean up TTBCR magic numbers and use u32 for this register - fix clang issue in VFP code leading to kernel oops, caused by compiler instruction scheduling. - switch 32-bit Arm to use GENERIC_CPU_DEVICES and use the arch_cpu_is_hotpluggable() hook. - pass struct device to arm_iommu_create_mapping() and move over to use iommu_paging_domain_alloc() rather than iommu_domain_alloc() - make amba_bustype constant * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: ARM: 9418/1: dma-mapping: Use iommu_paging_domain_alloc() ARM: 9417/1: dma-mapping: Pass device to arm_iommu_create_mapping() ARM: 9416/1: amba: make amba_bustype constant ARM: 9412/1: Convert to arch_cpu_is_hotpluggable() ARM: 9411/1: Switch over to GENERIC_CPU_DEVICES using arch_register_cpu() ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros ARM: 9409/1: mmu: Do not use magic number for TTBCR settings
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto update from Herbert Xu" "API: - Make self-test asynchronous Algorithms: - Remove MPI functions added for SM3 - Add allocation error checks to remaining MPI functions (introduced for SM3) - Set default Jitter RNG OSR to 3 Drivers: - Add hwrng driver for Rockchip RK3568 SoC - Allow disabling SR-IOV VFs through sysfs in qat - Fix device reset bugs in hisilicon - Fix authenc key parsing by using generic helper in octeontx* Others: - Fix xor benchmarking on parisc" * tag 'v6.12-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (96 commits) crypto: n2 - Set err to EINVAL if snprintf fails for hmac crypto: camm/qi - Use ERR_CAST() to return error-valued pointer crypto: mips/crc32 - Clean up useless assignment operations crypto: qcom-rng - rename *_of_data to *_match_data crypto: qcom-rng - fix support for ACPI-based systems dt-bindings: crypto: qcom,prng: document support for SA8255p crypto: aegis128 - Fix indentation issue in crypto_aegis128_process_crypt() crypto: octeontx* - Select CRYPTO_AUTHENC crypto: testmgr - Hide ENOENT errors crypto: qat - Remove trailing space after \n newline crypto: hisilicon/sec - Remove trailing space after \n newline crypto: algboss - Pass instance creation error up crypto: api - Fix generic algorithm self-test races crypto: hisilicon/qm - inject error before stopping queue crypto: hisilicon/hpre - mask cluster timeout error crypto: hisilicon/qm - reset device before enabling it crypto: hisilicon/trng - modifying the order of header files crypto: hisilicon - add a lock for the qp send operation crypto: hisilicon - fix missed error branch crypto: ccp - do not request interrupt on cmd completion when irqs disabled ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "The zero-copy changes are relatively significant, but regression risk should be contained. The feature needs to be used to cause trouble. Also it feels like we got an order of magnitude more semi-automated "refactoring" chaff than usual, I wonder if it's just us. Core & protocols: - Support Device Memory TCP, ability to zero-copy receive TCP payloads to a DMABUF region of memory while packet headers land separately in normal kernel buffers, and TCP processes then as usual. - The ability to read the PTP PHC (Physical Hardware Clock) alongside MONOTONIC_RAW timestamps with PTP_SYS_OFFSET_EXTENDED. Previously only CLOCK_REALTIME was supported. - Allow matching on all bits of IP DSCP for routing decisions. Previously we only supported on matching TOS bits in IPv4 which is a narrower interpretation of the same header field. - Increase the range of weights used for multi-path routing from 8 bits to 16 bits. - Add support for IPv6 PIO p flag in the Prefix Information Option per draft-ietf-6man-pio-pflag. - IPv6 IOAM6 support for new tunsrc encap mode for better performance. - Detect destinations which blackhole MPTCP traffic and avoid initiating MPTCP connections to them for a certain period of time, 1h by default. - Improve IPsec control path performance by removing the inexact policies list. - AF_VSOCK: add support for SIOCOUTQ ioctl. - Add enum for reasons TCP reset was sent for easier tracing. - Add SMC ringbufs usage statistics. Drivers: - Handle netconsole setup failures more gracefully, don't fail loading, retain the specified target as disabled. - Extend bonding's IPsec offload pass thru capabilities (ESN, stats). Filtering: - Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case when long-lived sockets miss a chance to set additional callbacks if a sockops program was not attached early in their lifetime. - Support using BPF skb helpers in tracepoints. - Conntrack Netlink: support CTA_FILTER for flush. - Improve SCTP support in nfnetlink_queue. - Improve performance of large nftables flush transactions. Things we sprinkled into general kernel code: - selftests: support setting an "interpreter" for script files; make it easy to run as separate cases tests where one "interpreter" is fed various test descriptions (in our case packet sequences). Driver API: - Extend core and ethtool APIs to support many PHYs connected to a single interface (PHY topologies). - Extend cable diagnostics to specify whether Time Domain Reflectometry (TDR) or Active Link Cable Diagnostic (ALCD) was used. - Add library for implementing MAC-PHY Ethernet drivers for SPI devices compatible with Open Alliance 10BASE-T1x MAC-PHY Serial Interface (TC6) standard. - Add helpers to the PHY framework, for PHYs following the Open Alliance standards: - 1000BaseT1 link settings - cable test and diagnostics - Support listing / dumping all allocated RSS contexts. - Add configuration for frequency Embedded SYNC in DPLL, which magically embeds sync pulses into Ethernet signaling. Device drivers: - Ethernet high-speed NICs: - Broadcom (bnxt): - use better FW APIs for queue reset - support QOS and TPID settings for the SR-IOV VLAN - support dynamic MSI-X allocation - Intel (100G, ice, idpf): - ice: support PCIe subfunctions - iavf: add support for TC U32 filters on VFs - ice: support Embedded SYNC in DPLL - nVidia/Mellanox (mlx5): - support HW managed steering tables - support PCIe PTM cross timestamping - AMD/Pensando: - ionic: use page_pool to increase Rx performance - Cisco (enic): - report per-queue statistics - Ethernet virtual: - Microsoft vNIC: - mana: support configuring ring length - netvsc: enable more channels on systems with many CPUs - IBM veth: - optimize polling to improve TCP_RR performance - optimize performance of Tx handling - VirtIO net: - synchronize the operstate with the admin state to allow a lower virtio-net to propagate the link status to an upper device like macvlan - Ethernet NICs consumer, and embedded: - Add driver for Realtek automotive PCIe devices (RTL9054, RTL9068, RTL9072, RTL9075, RTL9068, RTL9071) - Add driver for Microchip LAN8650/1 10BASE-T1S MAC-PHY. - Microchip: - lan743x: use phylink - support WOL, EEE, pause, link settings - add Wake-on-LAN support for KSZ87xx family - add KSZ8895/KSZ8864 switch support - factor out FDMA code and use it in sparx5 and lan966x (including DCB support in both) - Synopsys (stmmac): - support frame preemption (configured using TC and ethtool) - support Loongson DWMAC (GMAC v3.73) - support RockChips RK3576 DWMAC - TI: - am65-cpsw: add multi queue RX support - icssg-prueth: HSR offload support - Cadence (macb): - enable software (hrtimer based) IRQ coalescing by default - Xilinx (axinet): - expose HW statistics - improve multicast filtering - relax Rx checksum offload constraints - MediaTek: - mt7530: add EN7581 support - Aspeed (ftgmac100): - report link speed and duplex - Intel: - igc: add mqprio offload - igc: report EEE configuration - RealTek (r8169): - add support for RTL8126A rev.b - Vitesse (vsc73xx): - implement FDB add/del/dump operations - Freescale (fs_enet): - use phylink - Ethernet PHYs: - vitesse: implement downshift and MDI-X in vsc73xx PHYs - microchip: support LAN887x, supporting IEEE 802.3bw (100BASE-T1) and IEEE 802.3bp (1000BASE-T1) specifications - add Applied Micro QT2025 PHY driver (in Rust) - add Motorcomm yt8821 2.5G Ethernet PHY driver - CAN: - add driver for Rockchip RK3568 CAN-FD controller - flexcan: add wakeup support for imx95 - kvaser_usb: set hardware timestamp on transmitted packets - WiFi: - mac80211/cfg80211: - EHT rate support in AQL airtime fairness - handle DFS (radar detection) per link in Multi-Link Operation - RealTek (rtw89): - support RTL8852BT and 8852BE-VT (WiFi 6) - support hardware rfkill - support HW encryption in unicast management frames - support Wake-on-WLAN with supported network detection - RealTek (rtw89): - improve Rx performance by using USB frame aggregation - support USB 3 with RTL8822CU/RTL8822BU - Intel (iwlwifi/mvm): - offload RLC/SMPS functionality to firmware - Marvell (mwifiex): - add host based MLME to enable WPA3 - Bluetooth: - add support for Amlogic HCI UART protocol - add support for ISO data/packets to Intel and NXP drivers" * tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1303 commits) net/mlx5: HWS, check the correct variable in hws_send_ring_alloc_sq() netfilter: nft_socket: Fix a NULL vs IS_ERR() bug in nft_socket_cgroup_subtree_level() ice: Fix a NULL vs IS_ERR() check in probe() ice: Fix a couple NULL vs IS_ERR() bugs net: ethernet: fs_enet: Make the per clock optional net: ti: icssg-prueth: Add multicast filtering support in HSR mode net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload net: ti: icssg-prueth: Add support for HSR frame forward offload net: ti: icssg-prueth: Stop hardcoding def_inc net: ti: icss-iep: Move icss_iep structure net: ibm: emac: get rid of wol_irq net: ibm: emac: remove all waiting code net: ibm: emac: replace of_get_property net: ibm: emac: use netdev's phydev directly net: ibm: emac: use devm for register_netdev net: ibm: emac: remove mii_bus with devm net: ibm: emac: use devm for of_iomap net: ibm: emac: manage emac_irq with devm net: ibm: emac: use devm for alloc_etherdev octeontx2-af: debugfs: Add Channel info to RPM map ...
-
- 15 Sep, 2024 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Merge in late fixes to prepare for the 6.12 net-next PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Dan Carpenter authored
There is a copy and paste bug so this code checks "sq->dep_wqe" where "sq->wr_priv" was intended. It could result in a NULL pointer dereference. Fixes: 2ca62599 ("net/mlx5: HWS, added send engine and context handling") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/da822315-02b7-4f5b-9c86-0d5176c5069d@stanley.mountainSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Dan Carpenter authored
The cgroup_get_from_path() function never returns NULL, it returns error pointers. Update the error handling to match. Fixes: 7f3287db ("netfilter: nft_socket: make cgroupsv2 matching work with namespaces") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/bbc0c4e0-05cc-4f44-8797-2f4b3920a820@stanley.mountainSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Dan Carpenter authored
The ice_allocate_sf() function returns error pointers on error. It doesn't return NULL. Update the check to match. Fixes: 177ef7f1 ("ice: base subfunction aux driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/6951d217-ac06-4482-a35d-15d757fd90a3@stanley.mountainSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Dan Carpenter authored
The ice_repr_create() function returns error pointers. It never returns NULL. Fix the callers to check for IS_ERR(). Fixes: 977514fb ("ice: create port representor for SF") Fixes: 415db839 ("ice: make representor code generic") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/7f7aeb91-8771-47b8-9275-9d9f64f947dd@stanley.mountainSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Maxime Chevallier authored
Some platforms that use fs_enet don't have the PER register clock. This optional dependency on the clock was incorrectly made mandatory when switching to devm_ accessors. Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Closes: https://lore.kernel.org/netdev/4e4defa9-ef2f-4ff1-95ca-6627c24db20c@wanadoo.fr/ Fixes: c614acf6 ("net: ethernet: fs_enet: simplify clock handling with devm accessors") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/20240914081821.209130-1-maxime.chevallier@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fix from Paolo Bonzini: "Do not always honor guest PAT on CPUs that support self-snoop. This triggers an issue in the bochsdrm driver, which used ioremap() instead of ioremap_wc() to map the video RAM. The revert lets video RAM use the WB memory type instead of the slower UC memory type" * tag 'for-linus-6.11' of git://git.kernel.org/pub/scm/virt/kvm/kvm: Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
-
Paolo Bonzini authored
This reverts commit 377b2f35. This caused a regression with the bochsdrm driver, which used ioremap() instead of ioremap_wc() to map the video RAM. After the commit, the WB memory type is used without the IGNORE_PAT, resulting in the slower UC memory type. In fact, UC is slow enough to basically cause guests to not boot... but only on new processors such as Sapphire Rapids and Cascade Lake. Coffee Lake for example works properly, though that might also be an effect of being on a larger, more NUMA system. The driver has been fixed but that does not help older guests. Until we figure out whether Cascade Lake and newer processors are working as intended, revert the commit. Long term we might add a quirk, but the details depend on whether the processors are working as intended: for example if they are, the quirk might reference bochs-compatible devices, e.g. in the name and documentation, so that userspace can disable the quirk by default and only leave it enabled if such a device is being exposed to the guest. If instead this is actually a bug in CLX+, then the actions we need to take are different and depend on the actual cause of the bug. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
- 14 Sep, 2024 27 commits
-
-
Jakub Kicinski authored
MD Danish Anwar says: ==================== Introduce HSR offload support for ICSSG This series introduces HSR offload support for ICSSG driver. To support HSR offload to hardware, ICSSG HSR firmware is used. This series introduces, 1. HSR frame offload support for ICSSG driver. 2. HSR Tx Packet duplication offload 3. HSR Tx Tag and Rx Tag offload 4. Multicast filtering support in HSR offload mode. 5. Dependencies related to IEP. HSR Test Setup: -------------- ___________ ___________ ___________ | | Link AB | | Link BC | | __| AM64* |_________| AM64 |_________| AM64* |___ | | Station A | | Station B | | Station C | | | |___________| |___________| |___________| | | | |______________________________________________________________| Link CA *Could be any device that supports two ethernet interfaces. Steps to switch to HSR frame forward offload mode: ------------------------------------------------- Example assuming eth1, eth2 ports of ICSSG1 on AM64-EVM 1) Enable HSR offload for both interfaces ethtool -K eth1 hsr-fwd-offload on ethtool -K eth1 hsr-dup-offload on ethtool -K eth1 hsr-tag-ins-offload on ethtool -K eth1 hsr-tag-rm-offload on ethtool -K eth2 hsr-fwd-offload on ethtool -K eth2 hsr-dup-offload on ethtool -K eth2 hsr-tag-ins-offload on ethtool -K eth2 hsr-tag-rm-offload on 2) Create HSR interface and add slave interfaces to it ip link add name hsr0 type hsr slave1 eth1 slave2 eth2 \ supervision 45 version 1 3) Add IP address to the HSR interface ip addr add <IP_ADDR>/24 dev hsr0 4) Bring up the HSR interface ip link set hsr0 up Switching back to previous mode: -------------------------------- 1) Delete HSR interface ip link delete hsr0 2) Disable HSR port-to-port offloading mode, packet duplication ethtool -K eth1 hsr-fwd-offload off ethtool -K eth1 hsr-dup-offload off ethtool -K eth1 hsr-tag-ins-offload off ethtool -K eth1 hsr-tag-rm-offload off ethtool -K eth2 hsr-fwd-offload off ethtool -K eth2 hsr-dup-offload off ethtool -K eth2 hsr-tag-ins-offload off ethtool -K eth2 hsr-tag-rm-offload off Testing the port-to-port frame forward offload feature: ----------------------------------------------------- 1) Connect the LAN cables as shown in the test setup. 2) Configure Station A and Station C in HSR non-offload mode. 3) Configure Station B is HSR offload mode. 4) Since HSR is a redundancy protocol, disconnect cable "Link CA", to ensure frames from Station A reach Station C only through Station B. 5) Run iperf3 Server on Station C and client on station A. 7) Check the CPU usage on Station B. CPU usage report on Station B using mpstat when running UDP iperf3: ------------------------------------------------------------------- 1) Non-Offload case ------------------- CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle all 0.00 0.00 0.50 0.00 3.52 29.15 0.00 0.00 66.83 0 0.00 0.00 0.00 0.00 7.00 58.00 0.00 0.00 35.00 1 0.00 0.00 0.99 0.00 0.99 0.00 0.00 0.00 98.02 2) Offload case --------------- CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle all 0.00 0.00 0.00 0.00 0.50 0.00 0.00 0.00 99.50 0 0.00 0.00 0.99 0.00 0.00 0.00 0.00 0.00 99.01 1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 Note: 1) At the very least, hsr-fwd-offload must be enabled. Without offloading the port-to-port offload, other HSR offloads cannot be enabled. 2) hsr-tag-ins-offload and hsr-dup-offload are tightly coupled in the firmware implementation. They both need to be enabled / disabled together. v1: https://lore.kernel.org/20240808110800.1281716-1-danishanwar@ti.com/ v2: https://lore.kernel.org/20240813074233.2473876-1-danishanwar@ti.com v3: https://lore.kernel.org/20240828091901.3120935-1-danishanwar@ti.com/ v4: https://lore.kernel.org/20240904100506.3665892-1-danishanwar@ti.com/ v5: https://lore.kernel.org/20240906111538.1259418-1-danishanwar@ti.com/ [0] https://lore.kernel.org/202409061658.vSwcFJiK-lkp@intel.com/ [1] https://lore.kernel.org/20240828091901.3120935-5-danishanwar@ti.com/ [2] https://lore.kernel.org/20240828091901.3120935-7-danishanwar@ti.com/ [3] https://lore.kernel.org/20240813074233.2473876-2-danishanwar@ti.com/ [4] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=e846be0fba85 ==================== Link: https://patch.msgid.link/20240911081603.2521729-1-danishanwar@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
MD Danish Anwar authored
Add support for multicast filtering in HSR mode Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20240911081603.2521729-6-danishanwar@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ravi Gunasekaran authored
The HSR stack allows to offload its Tx packet duplication functionality to the hardware. Enable this offloading feature for ICSSG driver. Add support to offload HSR Tx Tag Insertion and Rx Tag Removal and duplicate discard. hsr tag insertion offload and hsr dup offload are tightly coupled in firmware implementation. Both these features need to be enabled / disabled together. Duplicate discard is done as part of RX tag removal and it is done by the firmware. When driver sends the r30 command ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware does RX tag removal as well as duplicate discard. Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20240911081603.2521729-5-danishanwar@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
MD Danish Anwar authored
Add support for offloading HSR port-to-port frame forward to hardware. When the slave interfaces are added to the HSR interface, the PRU cores will be stopped and ICSSG HSR firmwares will be loaded to them. Similarly, when HSR interface is deleted, the PRU cores will be restarted and the last used firmwares will be reloaded. PRUeth interfaces will be back to the last used mode. This commit also renames some APIs that are common between switch and hsr mode with '_fw_offload' suffix. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20240911081603.2521729-4-danishanwar@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
MD Danish Anwar authored
The def_inc is stored in icss_iep structure. Currently default increment (ns per clock tick) is hardcoded to 4 (Clock frequency being 250 MHz). Change this to use the iep->def_inc variable as the iep structure is now accessible to the driver files. Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20240911081603.2521729-3-danishanwar@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
MD Danish Anwar authored
Move icss_iep structure definition and to icss_iep.h file so that the structure members can be used / accessed by all icssg driver files. Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20240911081603.2521729-2-danishanwar@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - One Intel patch that I mistakenly merged into for-next despite it belonging in fixes: add Arrow Lake-H/U ACPI ID so this Arrow Lake chip probes. - One fix making the CY895x0 reg cache work, which is good because it makes the device work too. * tag 'pinctrl-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: pinctrl-cy8c95x0: Fix regcache pinctrl: meteorlake: Add Arrow Lake-H/U ACPI ID
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few last-minute ASoC fixes and MAINTAINERS update. All look small, obvious and nice-to-have fixes for 6.11-final" * tag 'sound-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: meson: axg-card: fix 'use-after-free' ASoC: codecs: avoid possible garbage value in peb2466_reg_read() MAINTAINERS: update Pierre Bossart's email and role ASoC: tas2781: fix to save the dsp bin file name into the correct array in case name_prefix is not NULL ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item ASoC: Intel: soc-acpi-intel-lnl-match: add missing empty item
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fix from Steve French: "Fix for packet signing of write" * tag '6.11-rc7-SMB3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix signature miscalculation
-
Takashi Iwai authored
Merge tag 'asoc-fix-v6.11-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.11 A few last minute fixes, plus an update for Pierre's contact details and status. It'd be good to get these into v6.11 (especially the MAINTAINERS update) but it wouldn't be the end of the world if they waited for the merge window, none of them are super remarkable and it's just a question of timing that they're last minute.
-
Jakub Kicinski authored
Rosen Penev says: ==================== net: ibm: emac: modernize a bit ==================== Link: https://patch.msgid.link/20240912024903.6201-1-rosenp@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rosen Penev authored
This is completely unused. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240912024903.6201-10-rosenp@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rosen Penev authored
EPROBE_DEFER, which probably wasn't available when this driver was written, can be used instead of waiting manually. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://patch.msgid.link/20240912024903.6201-9-rosenp@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rosen Penev authored
of_property_read_u32 can be used. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240912024903.6201-8-rosenp@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rosen Penev authored
Avoids having to use own struct member. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240912024903.6201-7-rosenp@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rosen Penev authored
Cleans it up automatically. No need to handle manually. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240912024903.6201-6-rosenp@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rosen Penev authored
Switching to devm management of mii_bus allows to remove mdiobus_unregister calls and thus avoids needing a mii_bus global struct member. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240912024903.6201-5-rosenp@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rosen Penev authored
Allows removing manual iounmap. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240912024903.6201-4-rosenp@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rosen Penev authored
It's the last to go in remove. Safe to let devm handle it. Also move request_irq to probe for clarity. It's removed in _remove not close. Use dev_err_probe instead of printk. Handles EPROBE_DEFER automatically. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240912024903.6201-3-rosenp@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rosen Penev authored
Allows to simplify the code slightly. This is safe to do as free_netdev gets called last. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240912024903.6201-2-rosenp@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Linu Cherian authored
Display channel info in the RPM map debugfs output. With this, cat /sys/kernel/debug/cn10k/rvu_pf_rpm_map would display channel number for each device in addition to the existing data. Sample output: PCI dev RVU PF Func NIX block rpm LMAC CHAN 0002:02:00.0 0x400 NIX0 rpm0 LMAC0 256 Signed-off-by: Linu Cherian <lcherian@marvell.com> Link: https://patch.msgid.link/20240912161450.164402-3-lcherian@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Maxime Chevallier authored
The context info allows continuing DUMP requests, shall they fill the netlink buffer. In the case of filtered DUMP requests, a reference on the netdev is grabbed in the .start() callback and release in .done(). Unfiltered DUMP request don't need the dev pointer to be set in the context info, doing so will trigger an unwanted netdev_put() in .done(). Reported-by: syzbot+e9ed4e4368d450c8f9db@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000d3bf150621d361a7@google.com/ Fixes: 17194be4 ("net: ethtool: Introduce a command to list PHYs on an interface") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20240913100515.167341-1-maxime.chevallier@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2024-09-11 The first patch is by Uwe Kleine-König targets all CAN platform driver and switches back the remove function to struct platform_driver::remove(). A patch by Stefan Mätje fixes the help text of the ESD USB driver. Jake Hamby's patch masks an unneeded interrupt in the m_can driver. The last 2 patches target the rockchip_canfd driver. Arnd Bergmann's patch reworks the delay calculation for the timekeeping worker, a patch by me fixes the decoding of the error code register. * tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of error code register can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculation can: m_can: m_can_chip_config(): mask timestamp wraparound IRQ can: usb: Kconfig: Fix list of devices for esd_usb driver can: Switch back to struct platform_driver::remove() ==================== Link: https://patch.msgid.link/20240912080438.2826895-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Dan Carpenter authored
Return an error if dma_set_mask_and_coherent() fails. Don't return success. Fixes: a36e9f5c ("rtase: Add support for a pci table in this module") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/f53ed942-5ac2-424b-a1ed-9473c599905e@stanley.mountainSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.11-20240912' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2024-09-12 Kuniyuki Iwashima's patch fixes an incomplete bug fix in the CAN BCM protocol, which was introduced during v6.11. A patch by Stefan Mätje removes the unsupported CAN_CTRLMODE_3_SAMPLES mode for CAN-USB/3-FD devices in the esd_usb driver. The next patch is by Martin Jocic and enables 64-bit DMA addressing for the kvaser_pciefd driver. The last two patches both affect the m_can driver. Jake Hamby's patch activates NAPI before interrupts are activated, a patch by me moves the stopping of the clock after the device has been shut down. * tag 'linux-can-fixes-for-6.11-20240912' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: m_can: m_can_close(): stop clocks after device has been shut down can: m_can: enable NAPI before enabling interrupts can: kvaser_pciefd: Enable 64-bit DMA addressing can: esd_usb: Remove CAN_CTRLMODE_3_SAMPLES for CAN-USB/3-FD can: bcm: Clear bo->bcm_proc_read after remove_proc_entry(). ==================== Link: https://patch.msgid.link/20240912075804.2825408-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Gaosheng Cui authored
Most of the drivers which used this header have been deleted, most of these code is obsoleted, move the only defines that are actually used into arch/powerpc/platforms/chrp/pegasos_eth.c and delete the file completely. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://patch.msgid.link/20240912011949.2726928-1-cuigaosheng1@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Nelson Escobar says: ==================== enic: Report per queue stats Patch #1: Use a macro instead of static const variables for array sizes. I didn't want to add more static const variables in the next patch so clean up the existing ones first. Patch #2: Collect per queue statistics Patch #3: Report per queue stats in netdev qstats Patch #4: Report some per queue stats in ethtool # NETIF="eno6" tools/testing/selftests/drivers/net/stats.py KTAP version 1 1..5 ok 1 stats.check_pause # XFAIL pause not supported by the device ok 2 stats.check_fec # XFAIL FEC not supported by the device ok 3 stats.pkt_byte_sum ok 4 stats.qstat_by_ifindex ok 5 stats.check_down # tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump qstats-get --json '{"ifindex": "34"}' [{'ifindex': 34, 'rx-bytes': 66762680, 'rx-csum-unnecessary': 1009345, 'rx-hw-drop-overruns': 0, 'rx-hw-drops': 0, 'rx-packets': 1009673, 'tx-bytes': 137936674899, 'tx-csum-none': 125, 'tx-hw-gso-packets': 2408712, 'tx-needs-csum': 2431531, 'tx-packets': 15475466, 'tx-stop': 0, 'tx-wake': 0}] v2: https://lore.kernel.org/20240905010900.24152-1-neescoba@cisco.com v1: https://lore.kernel.org/20240823235401.29996-1-neescoba@cisco.com ==================== Link: https://patch.msgid.link/20240912005039.10797-1-neescoba@cisco.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-