- 09 Oct, 2014 38 commits
-
-
Alex Deucher authored
commit c1789a2e upstream. Otherwise we may lose the DMA golden settings which can lead to hangs, etc. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Alex Deucher authored
commit 799028d5 upstream. Otherwise we may lose the DMA golden settings which can lead to hangs, etc. Reviewed-by:
-
Alex Deucher authored
commit 31a25e2c upstream. Otherwise we may lose the DMA golden settings which can lead to hangs, etc. bug: https://www.libreoffice.org/bugzilla/show_bug.cgi?id=83500Reviewed-by:
-
Trond Myklebust authored
commit cd9288ff upstream. James Drew reports another bug whereby the NFS client is now sending an OPEN_DOWNGRADE in a situation where it should really have sent a CLOSE: the client is opening the file for O_RDWR, but then trying to do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec. Reported-by:
James Drews <drews@engr.wisc.edu> Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu Fixes: aee7af35 (NFSv4: Fix problems with close in the presence...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Steve Dickson authored
commit 080af20c upstream. There is a race between nfs4_state_manager() and nfs_server_remove_lists() that happens during a nfsv3 mount. The v3 mount notices there is already a supper block so nfs_server_remove_lists() called which uses the nfs_client_lock spin lock to synchronize access to the client list. At the same time nfs4_state_manager() is running through the client list looking for work to do, using the same lock. When nfs4_state_manager() wins the race to the list, a v3 client pointer is found and not ignored properly which causes the panic. Moving some protocol checks before the state checking avoids the panic. Signed-off-by:
Steve Dickson <steved@redhat.com> Signed-off-by:
-
Joern Engel authored
commit 8ae757d0 upstream. In iscsi_copy_param_list() a failed iscsi_param_list memory allocation currently invokes iscsi_release_param_list() to cleanup, and will promptly trigger a NULL pointer dereference. Instead, go ahead and return for the first iscsi_copy_param_list() failure case. Found by coverity. Signed-off-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit b53b0d99 upstream. This patch fixes a bug in iscsit_logout_post_handler_diffcid() where a pointer used as storage for list_for_each_entry() was incorrectly being used to determine if no matching entry had been found. This patch changes iscsit_logout_post_handler_diffcid() to key off bool conn_found to determine if the function needs to exit early. Reported-by:
-
Bruno Prémont authored
commit 86fd887b upstream. Commit 20cde694 ("x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()") moved boot video device detection from efifb to x86 and ia64 pci/fixup.c. For dual-GPU Apple computers above change represents a regression as code in efifb did forcefully override vga_default_device while the merge did not (vgaarb happens prior to PCI fixup). To improve on initial device selection by vgaarb (it cannot know if PCI device not behind bridges see/decode legacy VGA I/O or not), move the screen_info based check from pci_video_fixup() to vgaarb's init function and use it to refine/override decision taken while adding the individual PCI VGA devices. This way PCI fixup has no reason to adjust vga_default_device anymore but can depend on its value for flagging shadowed VBIOS. This has the nice benefit of removing duplicated code but does introduce a would cause compile to fail without it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84461Reported-and-Tested-By:
Andreas Noever <andreas.noever@gmail.com> Signed-off-by:
Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Matthew Garrett <matthew.garrett@nebula.com> [ kamal: backport to 3.13-stable: context ] Signed-off-by:
-
Bruno Prémont authored
commit 20cde694 upstream. Commit b4aa0163 ("efifb: Implement vga_default_device() (v2)") added efifb vga_default_device() so EFI systems that do not load shadow VBIOS or setup VGA get proper value for boot_vga PCI sysfs attribute on the corresponding PCI device. Xorg doesn't detect devices when boot_vga=0, e.g., on some EFI systems such as MacBookAir2,1. Xorg detects the GPU and finds the DRI device but then bails out with "no devices detected". Note: When vga_default_device() is set boot_vga PCI sysfs attribute reflects its state. When unset this attribute is 1 whenever IORESOURCE_ROM_SHADOW flag is set. With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete while having native drivers for the GPU also makes selecting sysfb/efifb optional. Remove the efifb implementation of vga_default_device() and initialize vgaarb's vga_default_device() with the PCI GPU that matches boot screen_info in pci_fixup_video(). [bhelgaas: remove unused "dev" in efifb_setup()] Fixes: b4aa0163 ("efifb: Implement vga_default_device() (v2)") Tested-by:
Anibal Francisco Martinez Cortina <linuxkid.zeuz@gmail.com> Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> [ kamal: backport to 3.13-stable: context ] Signed-off-by:
-
Nathan Lynch authored
commit fbfb872f upstream. The TPIDRURO and TPIDRURW registers need to be flushed during exec; otherwise TLS information is potentially leaked. TPIDRURO in particular needs careful treatment. Since flush_thread basically needs the same code used to set the TLS in arm_syscall, pull that into a common set_tls helper in tls.h and use it in both places. Similarly, TEEHBR needs to be cleared during exec as well. Clearing its save slot in thread_info isn't right as there is no guarantee that a thread switch will occur before the new program runs. Just setting the register directly is sufficient. Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Sagi Grimberg authored
commit 0fc4ea70 upstream. disconnected_handler is invoked on several CM events (such as DISCONNECTED, DEVICE_REMOVAL, TIMEWAIT_EXIT...). Since multiple events can occur while before isert_free_conn is invoked, we might put all isert_conn references and free the connection too early. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Sagi Grimberg authored
commit c2f88b17 upstream. In case the connection didn't reach connected state, disconnected handler will never be invoked thus the second kref_put on isert_conn will be missing. Signed-off-by:
-
Chris Wilson authored
commit 611a7a4f upstream. One small change I forgot to make in commit c4d69da1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Sep 8 14:25:41 2014 +0100 drm/i915: Evict CS TLBs between batches was to update the copy width for the compact BLT copy instruction. Reported-by:
Thomas Richter <thor@math.tu-berlin.de> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Richter <thor@math.tu-berlin.de> Cc: Jani Nikula <jani.nikula@intel.com> Tested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Denis CIOCCA authored
commit a31d0928 upstream. This patch fix gains values. The first driver was designed using engineering samples, in mass production the values are changed. Signed-off-by:
Denis Ciocca <denis.ciocca@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Ludovic Desroches authored
commit d4f51956 upstream. If touchscreen mode is enabled and a conversion is requested on another channel, the result in the last converted data register can be a touchscreen relative value. Starting a conversion involves to do a conversion for all active channel. It starts with ADC channels and ends with touchscreen channels. Then if ADC_LCD register is not read quickly, its content may be a touchscreen conversion. To remove this temporal constraint, the conversion value is taken from the channel data register. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Hans de Goede authored
commit d2682118 upstream. The sys_vendor / product_name are somewhat generic unfortunately, so this may lead to some false positives. But nomux usually does no harm, where as not having it clearly is causing problems on the Avatar AVIU-145A6. https://bugzilla.kernel.org/show_bug.cgi?id=77391Reported-by:
Hugo P <saurosii@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit cc18a69c upstream. https://bugzilla.kernel.org/show_bug.cgi?id=69731Reported-by:
Jason Robinson <mail@jasonrobinson.me> Signed-off-by:
-
Dmitry Torokhov authored
commit c0120679 upstream. We are getting more and more reports about LG laptops not having functioning keyboard if we try to deactivate keyboard during probe. Given that having keyboard deactivated is merely "nice to have" instead of a hard requirement for probing, let's disable it on all LG boxes instead of trying to hunt down particular models. This change is prompted by patches trying to add "LG Electronics"/"ROCKY" and "LG Electronics"/"LW60-F27B" to the DMI list. https://bugzilla.kernel.org/show_bug.cgi?id=77051Reported-by:
Jaime Velasco Juan <jsagarribay@gmail.com> Reported-by:
Georgios Tsalikis <georgios@tsalikis.net> Tested-by:
-
Takashi Iwai authored
commit 7a9744cb upstream. When a driver is set up without the jack detection explicitly (either by passing a model option or via a specific fixup), the pin powermap of IDT/STAC codecs is set up wrongly, resulting in the silence output. It's because of a logic failure in stac_init_power_map(). It tries to avoid creating a callback for the pins that have other auto-hp and auto-mic callbacks, but the check is done in a wrong way at a wrong time. The stac_init_power_map() should be called after creating other jack detection ctls, and the jack callback should be created only for jack-detectable widgets. This patch fixes the check in stac_init_power_map() and its callee at the right place, after snd_hda_gen_build_controls(). Reported-by:
Adam Richter <adam_richter2004@yahoo.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Charles Keepax authored
commit 133c2681 upstream. In a couple of places the driver is missing a check to ensure there is a secondary DAI before it de-references the pointer to it, causing a null pointer de-reference. This patch adds a check to avoid this. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Sylwester Nawrocki authored
commit b97c60ab upstream. Currently configuration of the CDCLK pad is being overwritten in the i2s_shutdown() callback in order to gate the SoC output clock. However if an ASoC machine driver doesn't restore that clock settings each time after opening the sound device this results in the CDCLK pin being permanently configured into input mode. I.e. the output clock will always stay disabled. Fix that by saving the CDCLKCON bit state in i2s_shutdown() and and restoring it in the i2s_startup() callback. Signed-off-by:
Chen Zhen <zhen1.chen@samsung.com> Signed-off-by:
-
Cong Wang authored
commit 3577af70 upstream. We saw a kernel soft lockup in perf_remove_from_context(), it looks like the `perf` process, when exiting, could not go out of the retry loop. Meanwhile, the target process was forking a child. So either the target process should execute the smp function call to deactive the event (if it was running) or it should do a context switch which deactives the event. It seems we optimize out a context switch in perf_event_context_sched_out(), and what's more important, we still test an obsolete task pointer when retrying, so no one actually would deactive that event in this situation. Fix it directly by reloading the task pointer in perf_remove_from_context(). This should cure the above soft lockup. Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1409696840-843-1-git-send-email-xiyou.wangcong@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Qipan Li authored
commit f2a08b40 upstream. in spi interrupt handler, we need check RX_IO_DMA status to ensure rx fifo have received the specify count data. if not set, the while statement in spi isr function will keep loop, at last, make the kernel hang. [The code is actually there in the interrupt handler but apparently it needs the interrupt unmasking so the handler sees the status -- broonie] Signed-off-by:
Qipan Li <Qipan.Li@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
Mark Brown <broonie@kernel.org> [ kamal: backport to 3.13-stable: applied to spi_sirfsoc_transfer's pio path. ] Signed-off-by:
-
Peter Ujfalusi authored
commit fe0a29e1 upstream. In case of capture we should not use rotation. The reverse and mask is enough to get the data align correctly from the bus to MCU: Format data from bus after reverse (XRBUF) S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB| With this patch all supported formats will work for playback and capture. Reported-by: Jyri Sarha <jsarha@ti.com> (broken S24_3LE capture) Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Hans Verkuil authored
commit 6a03dc92 upstream. This was caused by an uninitialized setup.config field. Based on a suggestion from Devin Heitmueller. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com> Reported-by:
Scott Robinson <scott.robinson55@gmail.com> Tested-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Sudeep Holla authored
commit a040803a upstream. Since commit 1dbfa187 ("ARM: irq migration: force migration off CPU going down") the ARM interrupt migration code on cpu offline calls irqchip.irq_set_affinity() with the argument force=true. At the point of this change the argument had no effect because it was not used by any interrupt chip driver and there was no semantics defined. This changed with commit 01f8fa4f ("genirq: Allow forcing cpu affinity of interrupts") which made the force argument useful to route interrupts to not yet online cpus without checking the target cpu against the cpu online mask. The following commit ffde1de6 ("irqchip: gic: Support forced affinity setting") implemented this for the GIC interrupt controller. As a consequence the ARM cpu offline irq migration fails if CPU0 is offlined, because CPU0 is still set in the affinity mask and the validataion against cpu online mask is skipped to the force argument being true. The following first_cpu(mask) selection always selects CPU0 as the target. Solve the issue by calling irq_set_affinity() with force=false from the CPU offline irq migration code so the GIC driver validates the affinity mask against CPU online mask and therefore removes CPU0 from the possible target candidates. Tested on TC2 hotpluging CPU0 in and out. Without this patch the system locks up as the IRQs are not migrated away from CPU0. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Axel Lin authored
commit a97c883a upstream. device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: WARNING: CPU: 1 PID: 1 at drivers/base/dd.c:286 driver_probe_device+0x2b4/0x2f4() Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-10474-g835c90b-dirty #160 [<c0016364>] (unwind_backtrace) from [<c001251c>] (show_stack+0x20/0x24) [<c001251c>] (show_stack) from [<c04eaefc>] (dump_stack+0x7c/0x98) [<c04eaefc>] (dump_stack) from [<c0023d4c>] (warn_slowpath_common+0x78/0x9c) [<c0023d4c>] (warn_slowpath_common) from [<c0023d9c>] (warn_slowpath_null+0x2c/0x34) [<c0023d9c>] (warn_slowpath_null) from [<c0302c60>] (driver_probe_device+0x2b4/0x2f4) [<c0302c60>] (driver_probe_device) from [<c0302d90>] (__device_attach+0x50/0x54) [<c0302d90>] (__device_attach) from [<c0300e60>] (bus_for_each_drv+0x54/0x9c) [<c0300e60>] (bus_for_each_drv) from [<c0302958>] (device_attach+0x84/0x90) [<c0302958>] (device_attach) from [<c0301f10>] (bus_probe_device+0x94/0xb8) [<c0301f10>] (bus_probe_device) from [<c03000c0>] (device_add+0x434/0x4fc) [<c03000c0>] (device_add) from [<c0342dd4>] (spi_add_device+0x98/0x164) [<c0342dd4>] (spi_add_device) from [<c03444a4>] (spi_register_master+0x598/0x768) [<c03444a4>] (spi_register_master) from [<c03446b4>] (devm_spi_register_master+0x40/0x80) [<c03446b4>] (devm_spi_register_master) from [<c0346214>] (dw_spi_add_host+0x1a8/0x258) [<c0346214>] (dw_spi_add_host) from [<c0346920>] (dw_spi_mmio_probe+0x1d4/0x294) [<c0346920>] (dw_spi_mmio_probe) from [<c0304560>] (platform_drv_probe+0x3c/0x6c) [<c0304560>] (platform_drv_probe) from [<c0302a98>] (driver_probe_device+0xec/0x2f4) [<c0302a98>] (driver_probe_device) from [<c0302d3c>] (__driver_attach+0x9c/0xa0) [<c0302d3c>] (__driver_attach) from [<c0300f0c>] (bus_for_each_dev+0x64/0x98) [<c0300f0c>] (bus_for_each_dev) from [<c0302518>] (driver_attach+0x2c/0x30) [<c0302518>] (driver_attach) from [<c0302134>] (bus_add_driver+0xdc/0x1f4) [<c0302134>] (bus_add_driver) from [<c03035c8>] (driver_register+0x88/0x104) [<c03035c8>] (driver_register) from [<c030445c>] (__platform_driver_register+0x58/0x6c) [<c030445c>] (__platform_driver_register) from [<c0700f00>] (dw_spi_mmio_driver_init+0x18/0x20) [<c0700f00>] (dw_spi_mmio_driver_init) from [<c0008914>] (do_one_initcall+0x90/0x1d4) [<c0008914>] (do_one_initcall) from [<c06d7d90>] (kernel_init_freeable+0x178/0x248) [<c06d7d90>] (kernel_init_freeable) from [<c04e687c>] (kernel_init+0x18/0xfc) [<c04e687c>] (kernel_init) from [<c000ecd8>] (ret_from_fork+0x14/0x20) Reported-by:
Thor Thayer <tthayer@opensource.altera.com> Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Axel Lin authored
commit d9f26748 upstream. device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by:
leroy christophe <christophe.leroy@c-s.fr> Signed-off-by:
-
Aurelien Jarno authored
commit 29593fd5 upstream. Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c) moved the string related functions into a separate file, which might cause the following build error, depending on the configuration: | CC arch/mips/boot/compressed/decompress.o | In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0, | from linux/arch/mips/boot/compressed/decompress.c:67: | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp': | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration] | cc1: some warnings being treated as errors | linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed | make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1 | linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed It does not fail with the standard configuration, as when CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in include/linux/dynamic_debug.h. There might be other ways for it to get indirectly included. We can't add the include directly in xz_dec_stream.c as some architectures might want to use a different version for the boot/ directory (see for example arch/x86/boot/string.h). Signed-off-by:
Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7420/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Srinivas Pandruvada authored
commit 04950811 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Srinivas Pandruvada authored
commit b07e3b38 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit 0b4dce2e upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit f0e84acd upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit 55a6f9dd upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit 9e5846be upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit 0668a4e4 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by:
-
Srinivas Pandruvada authored
commit f1535665 upstream. Instead of a void function, return the trigger pointer. Whilst not in of itself a fix, this makes the following set of 7 fixes cleaner than they would otherwise be. Signed-off-by:
-
Johannes Pointner authored
commit 872687f6 upstream. Fixes: a2c12493 ('iio: of_iio_channel_get_by_name() returns non-null pointers for error legs') which improperly assumes that of_iio_channel_get_by_name must always return NULL and thus now hides -EPROBE_DEFER. Signed-off-by:
Johannes Pointner <johannes.pointner@br-automation.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
- 08 Oct, 2014 2 commits
-
-
Al Viro authored
commit 4023bfc9 upstream. in the former we simply check if dentry is still valid after picking its ->d_inode; in the latter we fetch ->d_inode in the same places where we fetch dentry and its ->d_seq, under the same checks. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit 7bd88377 upstream. return the value instead, and have path_init() do the assignment. Broken by "vfs: Fix absolute RCU path walk failures due to uninitialized seq number", which was Cc-stable with 2.6.38+ as destination. This one should go where it went. To avoid dummy value returned in case when root is already set (it would do no harm, actually, since the only caller that doesn't ignore the return value is guaranteed to have nd->root *not* set, but it's more obvious that way), lift the check into callers. And do the same to set_root(), to keep them in sync. Signed-off-by:
-
