Pull staging tree fix from Greg Kroah-Hartman:
 "Here is a single patch, a revert of an android driver patch, that
  resolves a bug that has been reported in the Android alarm driver.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Revert "Staging: Android alarm: IOCTL command encoding fix"

Pull s390 patches from Martin Schwidefsky:
 "Some more bug fixes and a config change.

  The signal bug is nasty, if the clock_gettime vdso function is
  interrupted by a signal while in access-register-mode we end up with
  an endless signal loop until the signal stack is full.  The config
  change is for aligned struct pages, gives us 8% improvement with
  hackbench."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/3215: fix tty close handling
  s390/mm: have 16 byte aligned struct pages
  s390/gup: fix access_ok() usage in __get_user_pages_fast()
  s390/gup: add missing TASK_SIZE check to get_user_pages_fast()
  s390/topology: fix core id vs physical package id mix-up
  s390/signal: set correct address space control

Pull drm fixes from Dave Airlie:
 "All pretty normal: one TTM oops fix, one radeon, a few intel and a
  vmwgfx fix."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/ttm: remove unneeded preempt_disable/enable
  ttm: Clear the ttm page allocated from high memory zone correctly
  vmwgfx: return an -EFAULT if copy_to_user() fails
  drm/radeon: fix logic error in atombios_encoders.c
  drm/i915: do not ignore eDP bpc settings from vbt
  drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures
  drm/i915/crt: fix DPMS standby and suspend mode handling

Pull another clk layer fix from Michael Turquette:
 "GCC 4.7 users get compilation errors from unnecessary use of inline in
  clk-provider.h.  This pull request fixes the regression by removing
  inline usage from those function declarations."

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: remove inline usage from clk-provider.h

Daniel writes:
Just a few small things to fix regressions, somehow all patches from Jani:
- Fix dpms confusion about which platforms support intermediate modes on
  vga.
- Revert the "ignore vbt for eDP bpc" patch, it breaks machines. This will
  annoy mbp retina owners again, but windows machines seem to _really_
  depend upon this. We can try to quirk the mbp retinas again in 3.8 and
  backport the patch.
- Fix connector leaks when the sdvo setup failed, resulted in an OOPS
  later on when trying to probe that connector (with it's encoder kfree'd
  already).

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: do not ignore eDP bpc settings from vbt
  drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures
  drm/i915/crt: fix DPMS standby and suspend mode handling

Just a single radeon fix from Alex.

* 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix logic error in atombios_encoders.c

It is unnecessary to disable preemption explicitly while calling
copy_highpage().  Because copy_highpage() will do it again through
kmap_atomic/kunmap_atomic.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The TTM page can be allocated from high memory. In such case it is
wrong to use the page_address(page) as the virtual address for the high memory
page.

bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50241Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

copy_to_user() returns the number of bytes remaining to be copied, but
we want to return a negative error code here.  I fixed a couple of these
last year, but I missed this one.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Users of GCC 4.7 have reported compiler errors due to having inline
applied to function declarations in clk-provider.h.  The definitions
exist in drivers/clk/clk.c.  An example error:

In file included from arch/arm/mach-omap2/clockdomain.c:25:0:
arch/arm/mach-omap2/clockdomain.c: In function ‘clkdm_clk_disable’:
include/linux/clk-provider.h:338:12: error: inlining failed in call to always_inline ‘__clk_get_enable_count’: function body not available
arch/arm/mach-omap2/clockdomain.c:1001:28: error: called from here
make[1]: *** [arch/arm/mach-omap2/clockdomain.o] Error 1
make: *** [arch/arm/mach-omap2] Error 2

This patch removes the use of inline from include/linux/clk-provider.h
but keeps the function definitions in drivers/clk/clk.c as inlined since
they are one-liners.
Signed-off-by: Igor Mazanov <i.mazanov@gmail.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: improved subject, added changelog]

Pull unicore32 update from Guan Xuetao.

* tag 'for-linus' of git://github.com/gxt/linux:
  arch/unicore32: remove CONFIG_EXPERIMENTAL
  unicore32: switch to generic sys_execve()
  unicore32: switch to generic kernel_thread()/kernel_execve()
  unicore32: Use Kbuild infrastructure for kvm_para.h
  UAPI: (Scripted) Disintegrate arch/unicore32/include/asm
  UniCore32-bugfix: Remove definitions in asm/bug.h to solve difference between native and cross compiler
  UniCore32-bugfix: fix mismatch return value of __xchg_bad_pointer
  UniCore32 bugfix: add missed CONFIG_ZONE_DMA
  unicore32/mm/fault.c: Port OOM changes to do_pf

Pull UBIFS fixes from Artem Bityutskiy:
 "Two patches which fix a problem reported by several people in the
  past, but only fixed now because no one gave enough material for
  debugging.

  Anyway, these fix the problem that sometimes after a power cut the
  file-system is not mountable with the following symptom:

	grab_empty_leb: could not find an empty LEB

  The fixes make the file-system mountable again."

* tag 'upstream-3.7-rc6' of git://git.infradead.org/linux-ubifs:
  UBIFS: fix mounting problems after power cuts
  UBIFS: introduce categorized lprops counter

Pull pstore fix from Anton Vorontsov:
 "A small fixup for the persistent storage subsystem.  The bug can
  prevent kernel booting on a APEI-enabled machines w/ PSTORE_CONSOLE=y
  (this is N by default, though)."

* tag 'for-v3.7-fixes' of git://git.infradead.org/users/cbou/linux-pstore:
  pstore: Fix NULL pointer dereference in console writes

Pill i2c fixes from Jean Delvare.

Well, "fixes"..  The biggest patch here is actually Jan marking Wolfram
Sang as the main i2c subsystem maintainer, with Jan staying on as the PC
controller maintainer.

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-mux-pinctrl: Fix probe error path
  MAINTAINERS: i2c: 7 years, this is it

Pull regulator fixes from Mark Brown:
 "A few fixes for teardown issues that will be rarely seen, plus a fix
  for a silly bug in regulator_is_supported_voltage() which shows how
  often the answer to the question should be false.

  The supported voltage commit is very new as I just edited to add a Cc
  to stable, the code itself has been in -next."

* tag 'regulator-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: fix voltage check in regulator_is_supported_voltage()
  regulator: core: Avoid deadlock when regulator_register fails
  Regulator: core: Unregister when gpio request fails.

Pull sound fixes from Takashi Iwai:
 "The only large LOC is seen in WM5102 driver, just writing a bunch of
  register updates, but the actual code change is small.  Other than
  that, all small fixes suitable for rc6."

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Fix mutex deadlock at disconnection
  ALSA: fm801: precedence bug in snd_fm801_tea575x_get_pins()
  ALSA: es1968: precedence bug in snd_es1968_tea575x_get_pins()
  ALSA: hda - Add a missing quirk entry for iMac 9,1
  ASoC: core: Double control update err for snd_soc_put_volsw_sx
  ASoC: dapm: Use card_list during DAPM shutdown
  ASoC: cs42l52: fix the return value of cs42l52_set_fmt()
  ASoC: bells: Correct type in sub speaker DAI name for WM5102
  ASoC: wm8978: pll incorrectly configured when codec is master
  ASoC: mxs-saif: Fix channel swap for 24-bit format
  ASoC: bells: Select WM1250-EV1 Springbank audio I/O module
  ASoC: bells: Add missing select of WM0010
  ASoC: mxs-saif: Add MODULE_ALIAS
  ASoC: wm5102: Write register value corrections after SYSCLK is enabled

The 3215 console always has the RAW3215_FIXED flag set, which causes
raw3215_shutdown() not to wait for outstanding I/O requests if an attached
tty gets closed.
The flag however can be simply removed, so we can guarantee that all requests
belonging to the tty have been processed when the tty is closed.

However the tasklet that belongs to the 3215 device may be scheduled even if
there is no tty attached anymore, since we have a race between console and tty
processing.
Thefore unconditional tty_wakekup() in raw3215_wakeup() can cause the following
NULL pointer dereference:

3.465368 Unable to handle kernel pointer dereference at virtual kernel address (null)
3.465448 Oops: 0004 #1 SMP
3.465454 Modules linked in:
3.465459 CPU: 1 Not tainted 3.6.0 #1
3.465462 Process swapper/1 (pid: 0, task: 000000003ffa4428, ksp: 000000003ffb7ce0)
3.465466 Krnl PSW : 0404100180000000 0000000000162f86 (__wake_up+0x46/0xb8)
3.465480            R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3
         Krnl GPRS: fffffffffffffffe 0000000000000000 0000000000000160 0000000000000001
3.465492            0000000000000001 0000000000000004 0000000000000004 000000000096b490
3.465499            0000000000000001 0000000000000100 0000000000000001 0000000000000001
3.465506            070000003fc87d60 0000000000000160 000000003fc87d68 000000003fc87d00
3.465526 Krnl Code: 0000000000162f76: e3c0f0a80004      lg      %r12,168(%r15)
                    0000000000162f7c: 58000370          l       %r0,880
                   #0000000000162f80: c007ffffffff00    xilf    %r0,4294967295
                   >0000000000162f86: ba102000          cs      %r1,%r0,0(%r2)
                    0000000000162f8a: 1211              ltr     %r1,%r1
                    0000000000162f8c: a774002f          brc     7,162fea
                    0000000000162f90: b904002d          lgr     %r2,%r13
                    0000000000162f94: b904003a          lgr     %r3,%r10
3.465597 Call Trace:
3.465599 (<0400000000000000> 0x400000000000000)
3.465602  <000000000048c77e> raw3215_wakeup+0x2e/0x40
3.465607  <0000000000134d66> tasklet_action+0x96/0x168
3.465612  <000000000013423c> __do_softirq+0xd8/0x21c
3.465615  <0000000000134678> irq_exit+0xa8/0xac
3.465617  <000000000046c232> do_IRQ+0x182/0x248
3.465621  <00000000005c8296> io_return+0x0/0x8
3.465625  <00000000005c7cac> vtime_stop_cpu+0x4c/0xb8
3.465629 (<0000000000194e06> tick_nohz_idle_enter+0x4e/0x74)
3.465633  <0000000000104760> cpu_idle+0x170/0x184
3.465636  <00000000005b5182> smp_start_secondary+0xd6/0xe0
3.465641  <00000000005c86be> restart_int_handler+0x56/0x6c
3.465643  <0000000000000000> 0x0
3.465645 Last Breaking-Event-Address:
3.465647  <0000000000403136> tty_wakeup+0x46/0x98
3.465652
3.465654 Kernel panic - not syncing: Fatal exception in interrupt
01: HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 0010F63C

The easiest solution is simply to check if tty is NULL in the tasklet.
If it is NULL nothing is to do (no tty attached), otherwise tty_wakeup()
can be called, since we hold a reference to the tty.
This is not nice... but it is a small patch and it works.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=50431Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

Passing a NULL id causes a NULL pointer deference in writers such as
erst_writer and efi_pstore_write because they expect to update this id.
Pass a dummy id instead.

This avoids a cascade of oopses caused when the initial
pstore_console_write passes a null which in turn causes writes to the
console causing further oopses in subsequent pstore_console_write calls.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>

Merge remote-tracking branches 'regulator/fix/gpio', 'regulator/fix/put' and 'regulator/fix/supp-volt' into tmp

regulator_is_supported_voltage() should return true only if the voltage
of fixed/constant regulator is between min_uV and max_uV.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Pull power tools fixes from Len Brown:
 "A pair of power tools patches -- a 3.7 regression fix plus a bug fix."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: graceful fail on garbage input
  tools/power turbostat: Repair Segmentation fault when using -i option

Pull MIPS update from Ralf Baechle:
 "To avoid unnecessary risk and work the preemption fixes are combined
  with some preparatory work that isn't strictly required.  So it's
  really just 3 fixes:

   - Get is_compat_task() to do the right thing while simplifying it.
     The unnecessary complexity hid a rarely striking bug which could be
     triggered by ext3/ext4 under certain circumstances.
   - Resolve a preemption issue in the irqflags.h functions for kernels
     built to support pre-MIPS32 / pre-MIPS64 Release 2 processors.
   - Fix the interrupt number of the MIPS Malta's CBUS UART."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Malta: Fix interupt number of CBUS UART.
  MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpus
  MIPS: Remove irqflags.h dependency from bitops.h
  MIPS: bitops.h: Change use of 'unsigned short' to 'int'
  MIPS: compat: Delete now unused TIF_32BIT.
  MIPS: compat: Implement is_compat_task() by testing for 32-bit address space.
  MIPS: compat: Fix use of TIF_32BIT_ADDR vs _TIF_32BIT_ADDR

Pull cgroup fixes from Tejun Heo:
 "This contains two fix patches for device_cgroup.  One fixes a
  regression introduced earlier in 3.7 cycle where device_cgroup could
  try to dereference the NULL parent of the root cgroup.  The other one
  is RCU usage fix."

* 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  device_cgroup: fix RCU usage
  device_cgroup: fix unchecked cgroup parent usage

The recent change for USB-audio disconnection race fixes introduced a
mutex deadlock again.  There is a circular dependency between
chip->shutdown_rwsem and pcm->open_mutex, depicted like below, when a
device is opened during the disconnection operation:

A. snd_usb_audio_disconnect() ->
     card.c::register_mutex ->
       chip->shutdown_rwsem (write) ->
         snd_card_disconnect() ->
           pcm.c::register_mutex ->
             pcm->open_mutex

B. snd_pcm_open() ->
     pcm->open_mutex ->
       snd_usb_pcm_open() ->
         chip->shutdown_rwsem (read)

Since the chip->shutdown_rwsem protection in the case A is required
only for turning on the chip->shutdown flag and it doesn't have to be
taken for the whole operation, we can reduce its window in
snd_usb_audio_disconnect().
Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When regulator_register fails and exits through the scrub path the
regulator_put function was called whilst holding the
regulator_list_mutex, causing deadlock.

This patch adds a private version of the regulator_put function which
can be safely called whilst holding the mutex, replacing the
aforementioned call.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

There is a precedence bug because | has higher precedence than ?:.  This
code was cut and pasted and I fixed a similar bug a few days ago.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When allocating the memory for i2c busses, the code checked the wrong
variable and thus never detected if there was a memory error.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>

I have been maintaining the i2c subsystem for 7 years now, it's about
time to let someone else take over. Just before I leave, I would like
to thank several individuals who made this possible at all:

* Greg Kroah-Hartman, for his faith in my potential subsystem
  maintainer skills. Greg, I hope I met your expectations.
* Late David Brownell, for helping me convert the i2c subsystem to the
  standard device driver model. Rest in peace David, we're missing you.
* Ben Dooks, for stepping in when I asked for someone to take care of
  the huge flow of new i2c adapter drivers for embedded systems.
* Wolfram Sang, for joining the crew when it became clear that there
  was more review work than Ben and myself could deal with.

I hope I did not forget anyone, please forgive me if I did.

Another big thank is due to Wolfram again, who quickly proposed to
take over as the main i2c subsystem maintainer. This will allow for a
smooth and fast transition.

Note that I will keep maintaining all I2C/SMBus controller drivers for
PC systems as well as a few others. I am hereby updating MAINTAINERS
accordingly. I'll also keep maintaining user-space i2c-tools.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>

Commit 6bd4a5d9 changed the
ANDROID_ALARM_GET_TIME ioctls from IOW to IOR.  While technically
correct, the _IOC_DIR bits are ignored by alarm_ioctl, so the
commit breaks a userspace ABI used by all existing Android devices
for a purely cosmetic reason.  Revert it.

Cc: stable <stable@vger.kernel.org>
Cc: Dae S. Kim <dae@velatum.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The CBUS UART's interrupt number was wrong conflicting with the interrupt
being tied to the Intel PIIX4.  Since the PIIX4's interrupt is registered
before the CBUS UART which is not being used on most systems this would
not be noticed.

Attempts to open the ttyS2 CBUS UART would result in:

genirq: Flags mismatch irq 18. 00000000 (serial) vs. 00010000 (XT-PIC cascade)
serial_link_irq_chain: request failed: -16 for irq: 18

Qemu was written to match the kernel so will need to be fixed also.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

There are laptops out there that need the eDP bpc from VBT. This is
effectively a revert of

commit 4344b813
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Aug 10 11:10:20 2012 +0200

    drm/i915: ignore eDP bpc settings from vbt

but putting the VBT check after the EDID check to see them both in dmesg if
this clamps more than the EDID. We have enough history with bpc clamping to
warrant the extra debug info.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47641
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56401Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Select HAVE_ALIGNED_STRUCT_PAGE on s390, so that the slub allocator can make
use of compare and swap double for lockless updates. This increases the size
of struct page to 64 bytes (instead of 56 bytes), however the performance gain
justifies the increased size:

- now excactly four struct pages fit into a single cache line; the
  case that accessing a struct page causes two cache line loads
  does not exist anymore.
- calculating the offset of a struct page within the memmap array
  is only a simple shift instead of a more expensive multiplication.

A "hackbench 200 process 200" run on a 32 cpu system did show an 8% runtime
improvement.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

access_ok() returns always "true" on s390. Therefore all access_ok()
invocations are rather pointless.
However when walking page tables we need to make sure that everything
is within bounds of the ASCE limit of the task's address space.
So remove the access_ok() call and add the same check we have in
get_user_pages_fast().
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

When walking page tables we need to make sure that everything
is within bounds of the ASCE limit of the task's address space.
Otherwise we might calculate e.g. a pud pointer which is not
within a pud and dereference it.
So check against TASK_SIZE (which is the ASCE limit) before
walking page tables.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

I don't think this works as intended.  '|' higher precedence than ?: so
the bitwize OR "0 | (val & STR_MOST)" is a no-op.

I have re-written it to be more clear.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Fixes for v3.7

A few small fixes plus a large but simple change for WM5102 which writes
out a bunch of register updates to the device when we enable the clock
as recommended following chip evaluation.

Merge branches 'fix/arizona', 'fix/core', 'fix/cs42l52', 'fix/mxs', 'fix/samsung' and 'fix/wm8978' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into tmp

Pull KVM fix from Marcelo Tosatti:
 "A correction for user triggerable oops"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: invalid opcode oops on SET_SREGS with OSXSAVE bit set (CVE-2012-4461)

Pull ux500 clk fixes from Mike Turquette:
 "Missing clkdev entries are causing regressions on the U8500 platform.
  This pull request contains those missing clkdev entries which are
  needed to boot that platform."

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: ux500: Register slimbus clock lookups for u8500
  clk: ux500: Update rtc clock lookup for u8500
  clk: ux500: Register msp clock lookups for u8500
  clk: ux500: Register ssp clock lookups for u8500
  clk: ux500: Register i2c clock lookups for u8500