- 29 Jan, 2023 37 commits
-
-
Anuj Gupta authored
This patch modifies the present check, so that bio-cache is not limited to iopoll. Signed-off-by:
Anuj Gupta <anuj20.g@samsung.com> Signed-off-by:
Kanchan Joshi <joshi.k@samsung.com> Link: https://lore.kernel.org/r/20230117120638.72254-3-anuj20.g@samsung.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Anuj Gupta authored
This patch sets REQ_ALLOC_CACHE flag for uring-passthru requests. This is a prep-patch so that normal / IRQ-driven uring-passthru I/Os can also leverage bio-cache. Signed-off-by:
-
Ming Lei authored
unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/Suggested-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.comSigned-off-by:
-
Ming Lei authored
Prepare for supporting unprivileged ublk device by limiting max number ublk devices added. Otherwise too many ublk devices could be added by un-trusted user, which can be thought as one DoS. Reviewed-by:
ZiyangZhang <ZiyangZhang@linux.alibaba.com> Signed-off-by:
-
Ming Lei authored
Userspace side only knows device ID, but the associated path of ublkc* and ublkb* could be changed by udev, and that depends on userspace's policy, so add parameter of UBLK_PARAM_TYPE_DEVT for retrieving major/minor of the ublkc* and ublkb*, then user may figure out major/minor of the ublk disks he/she owns. With major/minor, it is easy to find the device node path. Signed-off-by:
-
Ming Lei authored
It is annoying for each control command handler to get/put ublk device and deal with failure. Control command handler is simplified a lot by moving ublk_get_device_from_id into ublk_ctrl_uring_cmd(). Reviewed-by:
-
Ming Lei authored
If any ubq daemon is unprivileged, the ublk char device is allowed for unprivileged user actually, and we can't trust the current user, so not probe partitions. Fixes: 71f28f31 ("ublk_drv: add io_uring based userspace block driver") Reviewed-by:
-
Ming Lei authored
No one uses 'nr_aborted_queues' any more, so remove it. Reviewed-by:
-
Jens Axboe authored
If we're doing a large IO request which needs to be split into multiple bios for issue, then we can run into the same situation as the below marked commit fixes - parts will complete just fine, one or more parts will fail to allocate a request. This will result in a partially completed read or write request, where the caller gets EAGAIN even though parts of the IO completed just fine. Do the same for large bios as we do for splits - fail a NOWAIT request with EAGAIN. This isn't technically fixing an issue in the below marked patch, but for stable purposes, we should have either none of them or both. This depends on: 613b1488 ("block: handle bio_split_to_limits() NULL return") Cc: stable@vger.kernel.org # 5.15+ Fixes: 9cea62b2 ("block: don't allow splitting of a REQ_NOWAIT bio") Link: https://github.com/axboe/liburing/issues/766Reported-and-tested-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
Andreas Gruenbacher <agruen@linbit.com> Signed-off-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230113123538.144276-9-christoph.boehmwalder@linbit.comSigned-off-by:
-
Lars Ellenberg authored
Trying to remove an "empty" (just initialized, or "cleared") interval from the tree, this results in an endless loop. As we typically protect the tree with a spinlock_irq, the result is a hung system. Be nice to error cleanup code paths, ignore removal of empty intervals. Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
Christoph Böhmwalder authored
Signed-off-by:
Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123538.144276-7-christoph.boehmwalder@linbit.comSigned-off-by:
-
Christoph Böhmwalder authored
This require_context attribute originated in a proposed sparse patch by Philipp Reisner back in 2008. Johannes Berg had a different solution to a similar problem, and that patch "won" in the end; so the require_context thing never got merged. The whole history can be read at [0]. DRBD kept using these annotations anyway for a while. Nowadays, on a modern unmodified sparse, they obviously do nothing, and they are hardly used anymore anyway. So, just remove the definitions of these macros. [0] https://www.spinics.net/lists/linux-sparse/msg01150.htmlSigned-off-by:
-
Christoph Böhmwalder authored
Signed-off-by:
-
Christoph Böhmwalder authored
These are almost always used as unsigned integers, so mark them as such. Signed-off-by:
-
Robert Altnoeder authored
The protocol uses -1 as a reserved value for 'no specific volume', and since the protocol field is a 16 bit unsigned value, -1 is converted to 65535. Therefore, limit the range of valid volume numbers to [0, 65534]. Signed-off-by:
Robert Altnoeder <robert.altnoeder@linbit.com> Signed-off-by:
-
Christoph Böhmwalder authored
See also commit 93c68cc4 ("drbd: use consistent license"). We only want to license drbd under GPL-2.0, so use the corresponding SPDX header consistently. Signed-off-by:
-
Christoph Böhmwalder authored
To be more similar to what we do in the out-of-tree module and ease the upstreaming process. Signed-off-by:
-
Christoph Böhmwalder authored
Use the genetlink api version as defined in drbd_genl_api.h. Signed-off-by:
-
Christoph Böhmwalder authored
To be more similar to what we do in the out-of-tree module and ease the upstreaming process. Signed-off-by:
-
Jens Axboe authored
We have BIO_FLAG_LAST in the enum for bio specific flags, but it's not used to check that we're not exceeding the size of them. Add such a check. Reviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
-
Keith Busch authored
The user can set the max_sectors limit to any valid value via sysfs /sys/block/<dev>/queue/max_sectors_kb attribute. If the device limits are ever rescanned, though, the limit reverts back to the potentially artificially low BLK_DEF_MAX_SECTORS value. Preserve the user's setting as the max_sectors limit as long as it's valid. The user can reset back to defaults by writing 0 to the sysfs file. Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230105205146.3610282-3-kbusch@meta.comSigned-off-by:
-
Keith Busch authored
This is used as an unsigned value, so define it that way to avoid having to cast it. Suggested-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Davide Zini authored
Upon the invocation of its dispatch function, BFQ returns the next I/O request of the in-service bfq_queue, unless some exception holds. One such exception is that there is some underutilized actuator, different from the actuator for which the in-service queue contains I/O, and that some other bfq_queue happens to contain I/O for such an actuator. In this case, the next I/O request of the latter bfq_queue, and not of the in-service bfq_queue, is returned (I/O is injected from that bfq_queue). To find such an actuator, a linear scan, in increasing index order, is performed among actuators. Performing a linear scan entails a prioritization among actuators: an underutilized actuator may be considered for injection only if all actuators with a lower index are currently fully utilized, or if there is no pending I/O for any lower-index actuator that happens to be underutilized. This commits breaks this prioritization and tends to distribute injection uniformly across actuators. This is obtained by adding the following condition to the linear scan: even if an actuator A is underutilized, A is however skipped if its load is higher than that of the next actuator. Reviewed-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Davide Zini <davidezini2@gmail.com> Link: https://lore.kernel.org/r/20230103145503.71712-9-paolo.valente@linaro.orgSigned-off-by:
-
Davide Zini authored
The main service scheme of BFQ for sync I/O is serving one sync bfq_queue at a time, for a while. In particular, BFQ enforces this scheme when it deems the latter necessary to boost throughput or to preserve service guarantees. Unfortunately, when BFQ enforces this policy, only one actuator at a time gets served for a while, because each bfq_queue contains I/O only for one actuator. The other actuators may remain underutilized. Actually, BFQ may serve (inject) extra I/O, taken from other bfq_queues, in parallel with that of the in-service queue. This injection mechanism may provide the ground for dealing also with the above actuator-underutilization problem. Yet BFQ does not take the actuator load into account when choosing which queue to pick extra I/O from. In addition, BFQ may happen to inject extra I/O only when the in-service queue is temporarily empty. In view of these facts, this commit extends the injection mechanism in such a way that the latter: (1) takes into account also the actuator load; (2) checks such a load on each dispatch, and injects I/O for an underutilized actuator, if there is one and there is I/O for it. To perform the check in (2), this commit introduces a load threshold, currently set to 4. A linear scan of each actuator is performed, until an actuator is found for which the following two conditions hold: the load of the actuator is below the threshold, and there is at least one non-in-service queue that contains I/O for that actuator. If such a pair (actuator, queue) is found, then the head request of that queue is returned for dispatch, instead of the head request of the in-service queue. We have set the threshold, empirically, to the minimum possible value for which an actuator is fully utilized, or close to be fully utilized. By doing so, injected I/O 'steals' as few drive-queue slots as possibile to the in-service queue. This reduces as much as possible the probability that the service of I/O from the in-service bfq_queue gets delayed because of slot exhaustion, i.e., because all the slots of the drive queue are filled with I/O injected from other queues (NCQ provides for 32 slots). This new mechanism also counters actuator underutilization in the case of asymmetric configurations of bfq_queues. Namely if there are few bfq_queues containing I/O for some actuators and many bfq_queues containing I/O for other actuators. Or if the bfq_queues containing I/O for some actuators have lower weights than the other bfq_queues. Reviewed-by: -
Federico Gavioli authored
This patch implements the code to gather the content of the independent_access_ranges structure from the request_queue and copy it into the queue's bfq_data. This copy is done at queue initialization. We copy the access ranges into the bfq_data to avoid taking the queue lock each time we access the ranges. This implementation, however, puts a limit to the maximum independent ranges supported by the scheduler. Such a limit is equal to the constant BFQ_MAX_ACTUATORS. This limit was placed to avoid the allocation of dynamic memory. Reviewed-by:
Rory Chen <rory.c.chen@seagate.com> Signed-off-by:
Federico Gavioli <f.gavioli97@gmail.com> Signed-off-by:
-
Davide Zini authored
Similarly to sync bfq_queues, also async bfq_queues need to be split on a per-actuator basis. Reviewed-by:
-
Paolo Valente authored
When a bfq_queue Q is merged with another queue, several pieces of information are saved about Q. These pieces are stored in the bfqq_data field in the bfq_io_cq data structure of the process associated with Q. Yet, with a multi-actuator drive, a process may get associated with multiple bfq_queues: one queue for each of the N actuators. Each of these queues may undergo a merge. So, the bfq_io_cq data structure must be able to accommodate the above information for N queues. This commit solves this problem by turning the bfqq_data scalar field into an array of N elements (and by changing code so as to handle this array). This solution is written under the assumption that bfq_queues associated with different actuators cannot be cross-merged. This assumption holds naturally with basic queue merging: the latter is triggered by spatial locality, and sectors for different actuators are not close to each other (apart from the corner case of the last sectors served by a given actuator and the first sectors served by the next actuator). As for stable cross-merging, the assumption here is that it is disabled. Reviewed-by:
Gabriele Felici <felicigb@gmail.com> Signed-off-by:
Gianmarco Lusvardi <glusvardi@posteo.net> Signed-off-by:
Giulio Barabino <giuliobarabino99@gmail.com> Signed-off-by:
Emiliano Maccaferri <inbox@emilianomaccaferri.com> Signed-off-by:
-
Paolo Valente authored
With a multi-actuator drive, a process may get associated with multiple bfq_queues: one queue for each of the N actuators. So, the bfq_io_cq data structure must be able to accommodate its per-queue persistent information for N queues. Currently it stores this information for just one queue, in several scalar fields. This is a preparatory commit for moving to accommodating persistent information for N queues. In particular, this commit packs all the above scalar fields into a single data structure. Then there is now only one field, in bfq_io_cq, that stores all the above information. This scalar field will then be turned into an array by a following commit. Suggested-by:
-
Paolo Valente authored
If queues associated with different actuators are merged, then control is lost on each actuator. Therefore some actuator may be underutilized, and throughput may decrease. This problem cannot occur with basic queue merging, because the latter is triggered by spatial locality, and sectors for different actuators are not close to each other. Yet it may happen with stable merging. To address this issue, this commit prevents stable merging from occurring among queues associated with different actuators. Reviewed-by:
-
Paolo Valente authored
Single-LUN multi-actuator SCSI drives, as well as all multi-actuator SATA drives appear as a single device to the I/O subsystem [1]. Yet they address commands to different actuators internally, as a function of Logical Block Addressing (LBAs). A given sector is reachable by only one of the actuators. For example, Seagate’s Serial Advanced Technology Attachment (SATA) version contains two actuators and maps the lower half of the SATA LBA space to the lower actuator and the upper half to the upper actuator. Evidently, to fully utilize actuators, no actuator must be left idle or underutilized while there is pending I/O for it. The block layer must somehow control the load of each actuator individually. This commit lays the ground for allowing BFQ to provide such a per-actuator control. BFQ associates an I/O-request sync bfq_queue with each process doing synchronous I/O, or with a group of processes, in case of queue merging. Then BFQ serves one bfq_queue at a time. While in service, a bfq_queue is emptied in request-position order. Yet the same process, or group of processes, may generate I/O for different actuators. In this case, different streams of I/O (each for a different actuator) get all inserted into the same sync bfq_queue. So there is basically no individual control on when each stream is served, i.e., on when the I/O requests of the stream are picked from the bfq_queue and dispatched to the drive. This commit enables BFQ to control the service of each actuator individually for synchronous I/O, by simply splitting each sync bfq_queue into N queues, one for each actuator. In other words, a sync bfq_queue is now associated to a pair (process, actuator). As a consequence of this split, the per-queue proportional-share policy implemented by BFQ will guarantee that the sync I/O generated for each actuator, by each process, receives its fair share of service. This is just a preparatory patch. If the I/O of the same process happens to be sent to different queues, then each of these queues may undergo queue merging. To handle this event, the bfq_io_cq data structure must be properly extended. In addition, stable merging must be disabled to avoid loss of control on individual actuators. Finally, also async queues must be split. These issues are described in detail and addressed in next commits. As for this commit, although multiple per-process bfq_queues are provided, the I/O of each process or group of processes is still sent to only one queue, regardless of the actuator the I/O is for. The forwarding to distinct bfq_queues will be enabled after addressing the above issues. [1] https://www.linaro.org/blog/budget-fair-queueing-bfq-linux-io-scheduler-optimizations-for-multi-actuator-sata-hard-drives/Reviewed-by:
Carmine Zaccagnino <carmine@carminezacc.com> Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Borislav Petkov: - Cleanup the firmware node for the new IRQ MSI domain properly, to avoid leaking memory * tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi: Free the fwnode created by msi_create_device_irq_domain()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Start checking for -mindirect-branch-cs-prefix clang support too now that LLVM 16 will support it - Fix a NULL ptr deref when suspending with Xen PV - Have a SEV-SNP guest check explicitly for features enabled by the hypervisor and fail gracefully if some are unsupported by the guest instead of failing in a non-obvious and hard-to-debug way - Fix a MSI descriptor leakage under Xen - Mark Xen's MSI domain as supporting MSI-X - Prevent legacy PIC interrupts from being resent in software by marking them level triggered, as they should be, which lead to a NULL ptr deref * tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block acpi: Fix suspend with Xen PV x86/sev: Add SEV-SNP guest feature negotiation support x86/pci/xen: Fixup fallout from the PCI/MSI overhaul x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - touchpads on HP 15-* laptops switched back to PS/2 emulation mode - a quirk for Clevo PCX0DX/TUXEDO XP1511 to make sure keyboard is responding after resume * tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Clevo PCX0DX to i8042 quirk table Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"
-
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds authored
Pull cxl fixes from Dan Williams: "A couple of fixes for bugs introduced during the merge window. One is a regression, the other was a bug in the CXL AER handler: - Fix a crash regression due to module load order of cxl_pmem.ko - Fix wrong register offset read in CXL AER handling path" * tag 'cxl-fixes-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/pmem: Fix nvdimm unregistration when cxl_pmem driver is absent cxl: fix cxl_report_and_clear() RAS UE addr mis-assignment
-
Vlastimil Babka authored
This reverts commit 7efc3b72. We have got openSUSE reports (Link 1) for 6.1 kernel with khugepaged stalling CPU for long periods of time. Investigation of tracepoint data shows that compaction is stuck in repeating fast_find_migrateblock() based migrate page isolation, and then fails to migrate all isolated pages. Commit 7efc3b72 ("mm/compaction: fix set skip in fast_find_migrateblock") was suspected as it was merged in 6.1 and in theory can indeed remove a termination condition for fast_find_migrateblock() under certain conditions, as it removes a place that always marks a scanned pageblock from being re-scanned. There are other such places, but those can be skipped under certain conditions, which seems to match the tracepoint data. Testing of revert also appears to have resolved the issue, thus revert the commit until a more robust solution for the original problem is developed. It's also likely this will fix qemu stalls with 6.1 kernel reported in Link 2, but that is not yet confirmed. Link: https://bugzilla.suse.com/show_bug.cgi?id=1206848 Link: https://lore.kernel.org/kvm/b8017e09-f336-3035-8344-c549086c2340@kernel.org/ Link: https://lore.kernel.org/lkml/20230125134434.18017-1-mgorman@techsingularity.net/ Fixes: 7efc3b72 ("mm/compaction: fix set skip in fast_find_migrateblock") Cc: <stable@vger.kernel.org> Tested-by:
Pedro Falcato <pedro.falcato@gmail.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Jan, 2023 3 commits
-
-
Linus Torvalds authored
Joe found another DT file that shouldn't be executable, and that frustrated me enough that I went hunting with this script: git ls-files -s | grep '^100755' | cut -f2 | xargs grep -L '^#!' and that found another file that shouldn't have been marked executable either, despite being in the scripts directory. Maybe these two are the last ones at least for now. But I'm sure we'll be back in a few years, fixing things up again. Fixes: 8c6789f4 ("ASoC: dt-bindings: Add Everest ES8326 audio CODEC") Fixes: 4d8e5cd2 ("locking/atomics: Fix scripts/atomic/ script permissions") Reported-by:Joe Perches <joe@perches.com> Signed-off-by:
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull ksmbd server fixes from Steve French: "Four smb3 server fixes, all also for stable: - fix for signing bug - fix to more strictly check packet length - add a max connections parm to limit simultaneous connections - fix error message flood that can occur with newer Samba xattr format" * tag '6.2-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: downgrade ndr version error message to debug ksmbd: limit pdu length size according to connection status ksmbd: do not sign response to session request for guest login ksmbd: add max connections parameter -
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fix from Steve French: "Fix for reconnect oops in smbdirect (RDMA), also is marked for stable" * tag '6.2-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix oops due to uncleared server->smbd_conn in reconnect
-
