- 02 Aug, 2022 4 commits
-
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by:
Heiko Schocher <hs@denx.de> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220727164148.385476-1-krzysztof.kozlowski@linaro.org
-
Krzysztof Kozlowski authored
Id and schema fields do not need quotes. Signed-off-by:
-
Krzysztof Kozlowski authored
string literals do not need quotes. Signed-off-by:
-
Krzysztof Kozlowski authored
Id and schema fields do not need quotes. Signed-off-by:
Hector Martin <marcan@marcan.st> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
- 01 Aug, 2022 4 commits
-
-
Rob Herring authored
Allow 'iommu-map', 'iommu-map-mask', and 'msi-parent' properties for generic host. This fixes unevaluated property warnings on Arm Juno, AMD Seattle, and FSL LS1028a. Signed-off-by:
-
Xu Qiang authored
The commit 649cab56 (“of: properly check for error returned by fdt_get_name()”) changed the return value type from bool to int, but forgot to change the return value simultaneously. populate_node was only called in unflatten_dt_nodes, and returns with values greater than or equal to 0 were discarded without further processing. Considering that return 0 usually indicates success, return 0 instead of return true. Fixes: 649cab56 (“of: properly check for error returned by fdt_get_name()”) Signed-off-by:
Xu Qiang <xuqiang36@huawei.com> Signed-off-by:
-
Randy Dunlap authored
Correct all uses of "it's" that are meant to be possessive "its". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: devicetree@vger.kernel.org Signed-off-by:
-
Johan Jonker authored
Convert emac_rockchip.txt to YAML. Changes against original bindings: Add mdio sub node. Add extra clock for rk3036 Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Reviewed-by:
-
- 29 Jul, 2022 3 commits
-
-
Krzysztof Kozlowski authored
Move the Atmel/Microchip 93xx46 SPI compatible EEPROM family bindings from misc to eeprom directory to properly match subsystem. Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. The sitronix,st7735r references also panel-common.yaml and lists explicitly allowed properties, thus here reference only spi-peripheral-props.yaml for purpose of documenting the SPI slave device and bringing spi-max-frequency type validation. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
- 27 Jul, 2022 4 commits
-
-
Krzysztof Kozlowski authored
Convert the Qualcomm PM8916 watchdog timer controller bindings to DT schema and include them in parent device schema. Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Absolute path to other DT schema is preferred over relative one. Signed-off-by:
-
Rob Herring authored
'output-range-microvolts' is missing a type definition. '-microvolts' is not a standard unit (should be '-microvolt'). As the property is already in use, add a type reference. Signed-off-by:
-
Rob Herring authored
'cm-battery-stat' is missing a type definition and is not a common property. The type is boolean. Signed-off-by:
-
- 25 Jul, 2022 2 commits
-
-
Rob Herring authored
'video-mode' is missing a type definition and is not a common property. The type is 'uint32'. Signed-off-by:
-
Peter Collingbourne authored
As of commit 18250b43 ("of: fdt: Remove early_init_dt_reserve_memory_arch() override capability") this is no longer an arch hook, so rename it to remove the confusing _arch suffix. Also remove some unnecessary indirection from all but one of the callers by calling memblock_reserve() directly instead. Signed-off-by:
Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I3362bdd92ae6e47e8f5bac01aa228d32f9d01aadSigned-off-by:
-
- 22 Jul, 2022 1 commit
-
-
Rob Herring authored
'reset-gpio-active-high' is missing a type definition and is not a common property. The type is boolean. Signed-off-by:
Richard Zhu <hongxing.zhu@nxp.com> Link: https://lore.kernel.org/r/20220719215031.1875860-1-robh@kernel.org
-
- 21 Jul, 2022 11 commits
-
-
Thierry Reding authored
Document the bindings for the EM Microelectronic EM3027 RTC. Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
Thierry Reding authored
Convert the DS1307 (and compatible) RTC bindings from the free-form text format to json-schema. Signed-off-by:
-
Kuldeep Singh authored
Convert Qualcomm BAM DMA controller binding to DT schema format using json schema. Signed-off-by:
Kuldeep Singh <singh.kuldeep87k@gmail.com> [robh: add back SoC mapping to compatible strings] Signed-off-by:
-
Marek Vasut authored
Densitron is a manufacturer of LCD panels. https://www.densitron.comSigned-off-by:
Marek Vasut <marex@denx.de> Cc: Guido Günther <agx@sigxcpu.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Slark Xiao authored
Fix typo in the comment Signed-off-by:
Slark Xiao <slark_xiao@163.com> Reviewed-by:
-
Vincent Knecht authored
Add si-en compatibles for all chip variants and add conditionals depending on compatibles to document variants specs: - possible reg addresses - whether audio-gain-db is supported or not - maximum number of leds - led-max-microamp values Reviewed-by:
Vincent Knecht <vincent.knecht@mailoo.org> Signed-off-by:
-
Vincent Knecht authored
Convert leds-is31fl319x.txt to dtschema. Set license to the one recommended by DT project and set myself as maintainer. Reviewed-by:
-
Marijn Suijten authored
Document the availability of an LPG configuration for the PM660L PMIC in the Qualcomm Light Pulse Generator driver. Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Acked-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Skyworks Solutions, Inc. AAT1290 Current Regulator bindings to DT Schema. Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The examples were mixing 4-space with 2- and 3-space indentations, so correct them to use 4-space one. No functional change. Signed-off-by:
-
Krzysztof Kozlowski authored
The multi-led node defined address/size cells, so it is intended to have children with unit addresses. The second multi-led's reg property defined three LED indexes within one reg item, which is not correct - these are three separate items. Signed-off-by:
-
- 19 Jul, 2022 2 commits
-
-
Geert Uytterhoeven authored
It does not hurt to fill in the changeset id while the mutex is still held. After doing so, the function tails for the success and failure cases become identical, so they can be unified. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Frank Rowand <frank.rowand@sony.com> Tested-by:
-
Geert Uytterhoeven authored
There is no point in doing several preparatory steps in of_overlay_fdt_apply(), only to see of_overlay_apply() return early because of a corrupt device tree. Move the check for a corrupt device tree from of_overlay_apply() to of_overlay_fdt_apply(), to check for this as early as possible. Signed-off-by:
-
- 18 Jul, 2022 1 commit
-
-
Krzysztof Kozlowski authored
There is no need to specify "minItems" if it equals to "maxItems". On the other hand number of items in an array can be specified via describing items, which might bring some additional information. This simplifies a bit the binding. Signed-off-by:
-
- 12 Jul, 2022 1 commit
-
-
Liang He authored
We should use of_node_put() for the reference 'node' returned by of_parse_phandle() which will increase the refcount. Fixes: fec9b625 ("of: Add plumbing for restricted DMA pool") Co-authored-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
Liang He <windhl@126.com> Signed-off-by:
-
- 11 Jul, 2022 5 commits
-
-
Andy Shevchenko authored
On the ->remove() stage the callback uses physical device node instead of one from GPIO chip and the variable name which is different to one used in unittest_gpio_probe(). Make these consistent with unittest_gpio_probe(). Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
The OF node in the GPIO library is deprecated and soon will be removed. GPIO library now accepts fwnode as a firmware node, so switch the module to use it instead. Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
-
Rob Herring authored
Convert the arm,arm-firmware-suite partition binding to DT schema format. Simple conversion as there's only a compatible property. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220629185031.23826-1-robh@kernel.org
-
Chanho Park authored
Cortex A78AE's MPIDR has been added since commit 83bea32a ("arm64: Add part number for Arm Cortex-A78AE") We also need to add the compatible. Signed-off-by:
Chanho Park <chanho61.park@samsung.com> Signed-off-by:
-
Rob Herring authored
Fixed string property names should be under 'properties' rather than 'patternProperties'. Additionally, without beginning and end of line anchors, any prefix or suffix is allowed on the specified property names. As all the nvidia,tegra20-pmc powergates child node properties are fixed strings, change 'patternProperties' to 'properties'. Signed-off-by:
-
- 06 Jul, 2022 2 commits
-
-
Krzysztof Kozlowski authored
Document already used S5PV210 ChipID block. Signed-off-by:
-
Krzysztof Kozlowski authored
Group devices like Chip ID or SoC information under "hwinfo" directory. Signed-off-by:
-
