Use metadata matching for RoCE loopback rule if device is configured
to use metadata for source port matching.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Could be port initializing eswitch doesn't support RoCE version 1
but all ports should support RoCE version 2.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

If log_max_l2_table is 0 there is no really room for one L2 address.
and should be treated as not supported.
Do the check in MPFS init and for vport context events which
both used to update L2 address.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Move the debug print inside the if clause that actually does the change.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Checking sriov is done on the pci device so it can return true
on other devices like SF but nothing should be done in this case.
Add a check that the device is PF.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

It's enough to check for esw_manager cap for get the esw flow table
caps.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Like other rules use metadata matching if supported instead of
source_port.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

We could have an esw manager device which is not a vport group manager.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Other vport context should be set if vport number is not 0.
In case of ECPF, vport 0 represents the host PF representor so also
need to set other vport context.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

fs_err() already logs the function name. remote the arg so the function
name will not be logged twice.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There is no reason to check for flow_source cap to allow metadata
matching. When flow_source match is being used the flow_source cap
is being checked.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The call to mlx5_eswitch_enable() also does the same check
and if E-Switch not supported it returns 0 without any change.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The function didn't validate the value and doesn't require value
validation as it will always be valid true or false values.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The function returns zero unconditionally. Change it to return void instead
which simplifies its callers as error handing becomes unnecessary.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Refactor inet_accept() and MIB updates

Patches 1 and 2 refactor inet_accept() to provide a new __inet_accept()
that's usable with locked sockets, and then make use of that helper to
simplify mptcp_stream_accept().

Patches 3 and 4 add some new MIBS related to MPTCP address advertisement
and update related selftest scripts.

Patch 5 modifies the selftests to ensure MIBS are only printed once when
a test case fails.
====================

Link: https://lore.kernel.org/r/20230516-send-net-next-20220516-v1-0-e91822b7b6e0@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a test case fails, the mptcp_join.sh script can dump the
netns MIBs multiple times, leading to confusing output.

Let's dump such info only once per test-case, when needed.
This additionally allow removing some code duplication.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of duplicating the all existing TX check with
the TX side, add the new ones on selected test cases.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently we don't track explicitly a few events related to address
management suboption handling; this patch adds new mibs for ADD_ADDR
and RM_ADDR options tx and for missed tx events due to internal storage
exhaustion.

The self-tests must be updated to properly handle different mibs with
the same/shared prefix.

Additionally removes a couple of warning tracking the loss event.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/378Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rewrite the mptcp socket accept op, leveraging the new
__inet_accept() helper.

This way we can avoid acquiring the new socket lock twice
and we can avoid a couple of indirect calls.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

No functional changes intended. The new helper will be used
by the MPTCP protocol in the next patch to avoid duplicating
a few LoC.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-05-17 (ice, MAINTAINERS)

This series contains updates to ice driver and MAINTAINERS file.

Paul refactors PHY to link mode reporting and updates some PHY types to
report more accurate link modes for ice.

Dave removes mutual exclusion policy between LAG and SR-IOV in ice
driver.

Jesse updates link for Intel Wired LAN in the MAINTAINERS file.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  MAINTAINERS: update Intel Ethernet links
  ice: Remove LAG+SRIOV mutual exclusion
  ice: update PHY type to ethtool link mode mapping
  ice: refactor PHY type to ethtool link mode
  ice: update ICE_PHY_TYPE_HIGH_MAX_INDEX
====================

Link: https://lore.kernel.org/r/20230517165530.3179965-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Russell King says:

====================
net: sfp: add support for control of rate selection

This series introduces control of the rate selection SFP pins (or
their soft state in the I2C diagnostics EEPROM). Several SNIA documents
(referenced in the commits) describe the various different modes for
these, and we implement them all for maximum compatibility, but as
we know, SFP modules tend to do their own thing, so that may not be
sufficient.

In order to implement this, we need to change the locking arrangement
in the SFP layer - we need to make st_mutex (state mutex) able to be
taken from within the rtnl lock and sm_mutex (state machine mutex).
Essentially, st_mutex protects the hard (gpio) and soft state signals.

So, patches 2 through 5 rejig the locking so that st_mutex is only
ever taken when we want to fiddle with the signal state variables,
read or write the GPIOs, or read or write the soft state.

Patch 1 adds a helper that makes the locking rejig a little easier
as it combines the update of sfp->state with setting the updated
control state to the module.

Patch 6 adds code to phylink to give the signalling rate for various
PHY interface modes that are relevant to SFPs - this is the baud rate
of the encoded signal, not the data rate, which is what matters for
SFPs. This rate is passed through the SFP bus layer into the SFP
socket driver, which initially has a stub sfp_set_signal_rate().

Patch 7 adds the code to the SFP socket driver to parse the rate
selection data in the EEPROM, configure which RS signals need to be
driven, and the signalling rate threshold. We fill in
sfp_set_signal_rate() to set the rate select pins as appropriate.
====================

Link: https://lore.kernel.org/r/ZGSuTY8GqjM+sqta@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for parsing the rate select thresholds and switching of the
RS0 and RS1 signals to the transceiver. This is complicated by various
revisions of SFF-8472 and interaction of SFF-8431, SFF-8079 and
INF-8074.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support to the SFP layer to allow phylink to set the signalling
rate for a SFP module. The rate given will be in units of kilo-baud
(1000 baud).
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Change st_mutex's use within SFP such that it only protects the various
state members, as it was originally supposed to, and isn't held while
making various calls outside the driver.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Provide an unlocked version of sfp_sm_event() which can be used by
sfp_check_state() to avoid having to keep re-taking the lock if
several signals have changed state.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Swap the order of the rtnl and st_mutex locks - st_mutex is now nested
beneath rtnl lock instead of rtnl being beneath st_mutex. This will
allow us to hold st_mutex only while manipulating the module's hardware
or software control state.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As preparation to moving st_mutex inside rtnl_lock, we need to first
move the rtnl lock to cover reading the state.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are a couple of locations in the code where we modify
sfp->state, and then call sfp_set_state(, sfp->state) to update
the outputs/soft state to control the module. Provide a helper
which takes a mask and new state so that this is encapsulated in
one location.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Conflicts:

drivers/net/ethernet/freescale/fec_main.c
  6ead9c98 ("net: fec: remove the xdp_return_frame when lack of tx BDs")
  144470c8 ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Westphal says:

====================
Netfilter updates for net-next

nftables updates:

1. Allow key existence checks with maps.
   At the moment the kernel requires userspace to pass a destination
   register for the associated value, make this optional so userspace
   can query if the key exists, just like with normal sets.

2. nftables maintains a counter per set that holds the number of
   elements.  This counter gets decremented on element removal,
   but its only incremented if the set has a upper maximum value.
   Increment unconditionally, this will allow us to update the
   maximum value later on.

3. At DCCP option maching, from Jeremy Sowden.

4. use struct_size macro, from Christophe JAILLET.

Conntrack:

5. Squash holes in struct nf_conntrack_expect, also Christophe JAILLET.

6. Allow clash resolution for GRE Protocol to avoid a packet drop,
   from Faicker Mo.

Flowtable:

Simplify route logic and split large functions into smaller
chunks, from Pablo Neira Ayuso.

* tag 'nf-next-2023-05-18' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: flowtable: split IPv6 datapath in helper functions
  netfilter: flowtable: split IPv4 datapath in helper functions
  netfilter: flowtable: simplify route logic
  netfilter: conntrack: allow insertion clash of gre protocol
  netfilter: nft_set_pipapo: Use struct_size()
  netfilter: Reorder fields in 'struct nf_conntrack_expect'
  netfilter: nft_exthdr: add boolean DCCP option matching
  netfilter: nf_tables: always increment set element count
  netfilter: nf_tables: relax set/map validation checks
====================

Link: https://lore.kernel.org/r/20230518100759.84858-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, xfrm, bluetooth and netfilter.

  Current release - regressions:

   - ipv6: fix RCU splat in ipv6_route_seq_show()

   - wifi: iwlwifi: disable RFI feature

  Previous releases - regressions:

   - tcp: fix possible sk_priority leak in tcp_v4_send_reset()

   - tipc: do not update mtu if msg_max is too small in mtu negotiation

   - netfilter: fix null deref on element insertion

   - devlink: change per-devlink netdev notifier to static one

   - phylink: fix ksettings_set() ethtool call

   - wifi: mac80211: fortify the spinlock against deadlock by interrupt

   - wifi: brcmfmac: check for probe() id argument being NULL

   - eth: ice:
      - fix undersized tx_flags variable
      - fix ice VF reset during iavf initialization

   - eth: hns3: fix sending pfc frames after reset issue

  Previous releases - always broken:

   - xfrm: release all offloaded policy memory

   - nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment()

   - vsock: avoid to close connected socket after the timeout

   - dsa: rzn1-a5psw: enable management frames for CPU port

   - eth: virtio_net: fix error unwinding of XDP initialization

   - eth: tun: fix memory leak for detached NAPI queue.

  Misc:

   - MAINTAINERS: sctp: move Neil to CREDITS"

* tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
  MAINTAINERS: skip CCing netdev for Bluetooth patches
  mdio_bus: unhide mdio_bus_init prototype
  bridge: always declare tunnel functions
  atm: hide unused procfs functions
  net: isa: include net/Space.h
  Revert "ARM: dts: stm32: add CAN support on stm32f746"
  netfilter: nft_set_rbtree: fix null deref on element insertion
  netfilter: nf_tables: fix nft_trans type confusion
  netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
  net: wwan: t7xx: Ensure init is completed before system sleep
  net: selftests: Fix optstring
  net: pcs: xpcs: fix C73 AN not getting enabled
  net: wwan: iosm: fix NULL pointer dereference when removing device
  vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
  mailmap: add entries for Nikolay Aleksandrov
  igb: fix bit_shift to be in [1..8] range
  net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset
  cassini: Fix a memory leak in the error handling path of cas_init_one()
  tun: Fix memory leak for detached NAPI queue.
  can: kvaser_pciefd: Disable interrupts in probe error path
  ...

Pull media fixes from Mauro Carvalho Chehab:
 "Several fixes for the dvb core and drivers:

   - fix UAF and null pointer de-reference in DVB core

   - fix kernel runtime warning for blocking operation in wait_event*()
     in dvb core

   - fix write size bug in DVB conditional access core

   - fix dvb demux continuity counter debug check logic

   - randconfig build fixes in pvrusb2 and mn88443x

   - fix memory leak in ttusb-dec

   - fix netup_unidvb probe-time error check logic

   - improve error handling in dw2102 if it can't retrieve DVB MAC
     address"

* tag 'media/v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221
  media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()
  media: dvb-core: Fix use-after-free due to race at dvb_register_device()
  media: dvb-core: Fix use-after-free due on race condition at dvb_net
  media: dvb-core: Fix use-after-free on race condition at dvb_frontend
  media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table
  media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()
  media: dvb_ca_en50221: fix a size write bug
  media: netup_unidvb: fix irq init by register it at the end of probe
  media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address
  media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()
  media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer
  media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()
  media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()
  media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()
  media: netup_unidvb: fix use-after-free at del_timer()
  media: dvb_demux: fix a bug for the continuity counter
  media: pvrusb2: fix DVB_CORE dependency

Horatiu Vultur says:

====================
net: lan966x: Add support for PCP, DEI, DSCP

This patch series extends lan966x to offload to the hardware the
following features:
- PCP: this configuration is per port both at ingress and egress.
- App trust: which allows to specify a trust order of app selectors.
  This can be PCP or DSCP or DSCP/PCP.
- default priority
- DSCP: this configuration is shared between the ports both at ingress
  and egress.
====================

Link: https://lore.kernel.org/r/20230516201408.3172428-1-horatiu.vultur@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add support for DSCP rewrite in lan966x driver. On egress DSCP is
rewritten from either classified DSCP, or frame DSCP. Classified DSCP is
determined by the Analyzer Classifier on ingress, and is mapped from
classified QoS class and DP level. Classification of DSCP is by default
enabled for all ports.

It is required that DSCP is trusted for the egress port *and* rewrite
table is not empty, in order to rewrite DSCP based on classified DSCP,
otherwise DSCP is always rewritten from frame DSCP.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add support for rewrite of PCP and DEI value, based on QoS and DP level.

The DCB rewrite table is queried for mappings between priority and
PCP/DEI. The classified DP level is then encoded in the DEI bit, if a
mapping for DEI exists.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add support for offloading default prio.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add support for offloading dscp app entries. The dscp values are global
for all lan966x ports.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Make use of set/getapptrust() to implement per-selector trust
and trust order.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add support for offloading pcp app entries. Lan966x has 8 priority
queues per port and for each priority it also has a drop precedence.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>