- 29 Sep, 2015 38 commits
-
-
Takashi Iwai authored
commit eb38f3a4 upstream. We've got bug reports showing the old systemd-logind (at least system-210) aborting unexpectedly, and this turned out to be because of an invalid error code from close() call to evdev devices. close() is supposed to return only either EINTR or EBADFD, while the device returned ENODEV. logind was overreacting to it and decided to kill itself when an unexpected error code was received. What a tragedy. The bad error code comes from flush fops, and actually evdev_flush() returns ENODEV when device is disconnected or client's access to it is revoked. But in these cases the fact that flush did not actually happen is not an error, but rather normal behavior. For non-disconnected devices result of flush is also not that interesting as there is no potential of data loss and even if it fails application has no way of handling the error. Because of that we are better off always returning success from evdev_flush(). Also returning EINTR from flush()/close() is discouraged (as it is not clear how application should handle this error), so let's stop taking evdev->mutex interruptibly. Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=939834Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Zyngier authored
commit c4cbba9f upstream. When running a guest with the architected timer disabled (with QEMU and the kernel_irqchip=off option, for example), it is important to make sure the timer gets turned off. Otherwise, the guest may try to enable it anyway, leading to a screaming HW interrupt. The fix is to unconditionally turn off the virtual timer on guest exit. Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit 43297dda upstream. When restoring the system register state for an AArch32 guest at EL2, writes to DACR32_EL2 may not be correctly synchronised by Cortex-A57, which can lead to the guest effectively running with junk in the DACR and running into unexpected domain faults. This patch works around the issue by re-ordering our restoration of the AArch32 register aliases so that they happen before the AArch64 system registers. Ensuring that the registers are restored in this order guarantees that they will be correctly synchronised by the core. Reviewed-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Pavel Fedin authored
commit c2f58514 upstream. Until b26e5fda ("arm/arm64: KVM: introduce per-VM ops"), kvm_vgic_map_resources() used to include a check on irqchip_in_kernel(), and vgic_v2_map_resources() still has it. But now vm_ops are not initialized until we call kvm_vgic_create(). Therefore kvm_vgic_map_resources() can being called without a VGIC, and we die because vm_ops.map_resources is NULL. Fixing this restores QEMU's kernel-irqchip=off option to a working state, allowing to use GIC emulation in userspace. Fixes: b26e5fda ("arm/arm64: KVM: introduce per-VM ops") Signed-off-by:
Pavel Fedin <p.fedin@samsung.com> [maz: reworked commit message] Signed-off-by:
-
Will Deacon authored
commit df057cc7 upstream. Cortex-A53 processors <= r0p4 are affected by erratum #843419 which can lead to a memory access using an incorrect address in certain sequences headed by an ADRP instruction. There is a linker fix to generate veneers for ADRP instructions, but this doesn't work for kernel modules which are built as unlinked ELF objects. This patch adds a new config option for the erratum which, when enabled, builds kernel modules with the mcmodel=large flag. This uses absolute addressing for all kernel symbols, thereby removing the use of ADRP as a PC-relative form of addressing. The ADRP relocs are removed from the module loader so that we fail to load any potentially affected modules. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Will Deacon authored
commit d10bcd47 upstream. When entering the kernel at EL2, we fail to initialise the MDCR_EL2 register which controls debug access and PMU capabilities at EL1. This patch ensures that the register is initialised so that all traps are disabled and all the PMU counters are available to the host. When a guest is scheduled, KVM takes care to configure trapping appropriately. Acked-by:
-
Will Deacon authored
commit bdec97a8 upstream. When saving/restoring the VFP registers from a compat (AArch32) signal frame, we rely on the compat registers forming a prefix of the native register file and therefore make use of copy_{to,from}_user to transfer between the native fpsimd_state and the compat_vfp_sigframe. Unfortunately, this doesn't work so well in a big-endian environment. Our fpsimd save/restore code operates directly on 128-bit quantities (Q registers) whereas the compat_vfp_sigframe represents the registers as an array of 64-bit (D) registers. The architecture packs the compat D registers into the Q registers, with the least significant bytes holding the lower register. Consequently, we need to swap the 64-bit halves when converting between these two representations on a big-endian machine. This patch replaces the __copy_{to,from}_user invocations in our compat VFP signal handling code with explicit __put_user loops that operate on 64-bit values and swap them accordingly. Reviewed-by:
-
Ard Biesheuvel authored
commit 34ba2c42 upstream. The linear region size of a 39-bit VA kernel is only 256 GB, which may be insufficient to cover all of system RAM, even on platforms that have much less than 256 GB of memory but which is laid out very sparsely. So make sure we clip the memory we will not be able to map before installing it into the memblock memory table, by setting MAX_MEMBLOCK_ADDR accordingly. Reviewed-by:
Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
commit 8eafeb48 upstream. When parsing the memory nodes to populate the memblock memory table, we check against high and low limits and clip any memory that exceeds either one of them. However, for arm64, the high limit of (phys_addr_t)~0 is not very meaningful, since phys_addr_t is 64 bits (i.e., no limit) but there may be other constraints that limit the memory ranges that we can support. So rename MAX_PHYS_ADDR to MAX_MEMBLOCK_ADDR (for clarity) and only define it if the arch does not supply a definition of its own. Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Ard Biesheuvel authored
commit 674c242c upstream. When a task calls execve(), its FP/SIMD state is flushed so that none of the original program state is observeable by the incoming program. However, since this flushing consists of setting the in-memory copy of the FP/SIMD state to all zeroes, the CPU field is set to CPU 0 as well, which indicates to the lazy FP/SIMD preserve/restore code that the FP/SIMD state does not need to be reread from memory if the task is scheduled again on CPU 0 without any other tasks having entered userland (or used the FP/SIMD in kernel mode) on the same CPU in the mean time. If this happens, the FP/SIMD state of the old program will still be present in the registers when the new program starts. So set the CPU field to the invalid value of NR_CPUS when performing the flush, by calling fpsimd_flush_task_state(). Reported-by:
Chunyan Zhang <chunyan.zhang@spreadtrum.com> Reported-by:
Janet Liu <janet.liu@spreadtrum.com> Signed-off-by:
-
Will Deacon authored
commit 412fcb6c upstream. We have a micro-optimisation on the fast syscall return path where we take care to keep x0 live with the return value from the syscall so that we can avoid restoring it from the stack. The benefit of doing this is fairly suspect, since we will be restoring x1 from the stack anyway (which lives adjacent in the pt_regs structure) and the only additional cost is saving x0 back to pt_regs after the syscall handler, which could be seen as a poor man's prefetch. More importantly, this causes issues with the context tracking code. The ct_user_enter macro ends up branching into C code, which is free to use x0 as a scratch register and consequently leads to us returning junk back to userspace as the syscall return value. Rather than special case the context-tracking code, this patch removes the questionable optimisation entirely. Cc: Larry Bassel <larry.bassel@linaro.org> Cc: Kevin Hilman <khilman@linaro.org> Reviewed-by:
Hanjun Guo <hanjun.guo@linaro.org> Tested-by:
-
Jeff Vander Stoep authored
commit bf0c4e04 upstream. Move the poison pointer offset to 0xdead000000000000, a recognized value that is not mappable by user-space exploits. Acked-by:
Thierry Strudel <tstrudel@google.com> Signed-off-by:
Jeff Vander Stoep <jeffv@google.com> Signed-off-by:
-
Theodore Ts'o authored
commit bdfe0cbd upstream. This reverts commit 08439fec. Unfortunately we still need to test for bdi->dev to avoid a crash when a USB stick is yanked out while a file system is mounted: usb 2-2: USB disconnect, device number 2 Buffer I/O error on dev sdb1, logical block 15237120, lost sync page write JBD2: Error -5 detected when updating journal superblock for sdb1-8. BUG: unable to handle kernel paging request at 34beb000 IP: [<c136ce88>] __percpu_counter_add+0x18/0xc0 *pdpt = 0000000023db9001 *pde = 0000000000000000 Oops: 0000 [#1] SMP CPU: 0 PID: 4083 Comm: umount Tainted: G U OE 4.1.1-040101-generic #201507011435 Hardware name: LENOVO 7675CTO/7675CTO, BIOS 7NETC2WW (2.22 ) 03/22/2011 task: ebf06b50 ti: ebebc000 task.ti: ebebc000 EIP: 0060:[<c136ce88>] EFLAGS: 00010082 CPU: 0 EIP is at __percpu_counter_add+0x18/0xc0 EAX: f21c8e88 EBX: f21c8e88 ECX: 00000000 EDX: 00000001 ESI: 00000001 EDI: 00000000 EBP: ebebde60 ESP: ebebde40 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 34beb000 CR3: 33354200 CR4: 000007f0 Stack: c1abe100 edcb0098 edcb00ec ffffffff f21c8e68 ffffffff f21c8e68 f286d160 ebebde84 c1160454 00000010 00000282 f72a77f8 00000984 f72a77f8 f286d160 f286d170 ebebdea0 c11e613f 00000000 00000282 f72a77f8 edd7f4d0 00000000 Call Trace: [<c1160454>] account_page_dirtied+0x74/0x110 [<c11e613f>] __set_page_dirty+0x3f/0xb0 [<c11e6203>] mark_buffer_dirty+0x53/0xc0 [<c124a0cb>] ext4_commit_super+0x17b/0x250 [<c124ac71>] ext4_put_super+0xc1/0x320 [<c11f04ba>] ? fsnotify_unmount_inodes+0x1aa/0x1c0 [<c11cfeda>] ? evict_inodes+0xca/0xe0 [<c11b925a>] generic_shutdown_super+0x6a/0xe0 [<c10a1df0>] ? prepare_to_wait_event+0xd0/0xd0 [<c1165a50>] ? unregister_shrinker+0x40/0x50 [<c11b92f6>] kill_block_super+0x26/0x70 [<c11b94f5>] deactivate_locked_super+0x45/0x80 [<c11ba007>] deactivate_super+0x47/0x60 [<c11d2b39>] cleanup_mnt+0x39/0x80 [<c11d2bc0>] __cleanup_mnt+0x10/0x20 [<c1080b51>] task_work_run+0x91/0xd0 [<c1011e3c>] do_notify_resume+0x7c/0x90 [<c1720da5>] work_notify Code: 8b 55 e8 e9 f4 fe ff ff 90 90 90 90 90 90 90 90 90 90 90 55 89 e5 83 ec 20 89 5d f4 89 c3 89 75 f8 89 d6 89 7d fc 89 cf 8b 48 14 <64> 8b 01 89 45 ec 89 c2 8b 45 08 c1 fa 1f 01 75 ec 89 55 f0 89 EIP: [<c136ce88>] __percpu_counter_add+0x18/0xc0 SS:ESP 0068:ebebde40 CR2: 0000000034beb000 ---[ end trace dd564a7bea834ecd ]--- Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101011Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Eric Sandeen authored
commit c642dc9e upstream. At some point along this sequence of changes: f6e63f90 ext4: fold ext4_nojournal_sops into ext4_sops bb044576 ext4: support freezing ext2 (nojournal) file systems 9ca92389 ext4: Use separate super_operations structure for no_journal filesystems ext4 started setting needs_recovery on filesystems without journals when they are unfrozen. This makes no sense, and in fact confuses blkid to the point where it doesn't recognize the filesystem at all. (freeze ext2; unfreeze ext2; run blkid; see no output; run dumpe2fs, see needs_recovery set on fs w/ no journal). To fix this, don't manipulate the INCOMPAT_RECOVER feature on filesystems without journals. Reported-by:
Stu Mark <smark@datto.com> Reviewed-by:
Jan Kara <jack@suse.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Daniel Axtens authored
commit 2925c2fd upstream. Currently the first thing we do in cxl_probe is to grab a reference on the pci device. Later on, we call device_register on our adapter. In our remove path, we call device_unregister, but we never call pci_dev_put. We therefore leak the device every time we do a reflash. device_register/unregister is sufficient to hold the reference. Therefore, drop the call to pci_dev_get. Here's why this is safe. The proposed cxl_probe(pdev) calls cxl_adapter_init: a) init calls cxl_adapter_alloc, which creates a struct cxl, conventionally called adapter. This struct contains a device entry, adapter->dev. b) init calls cxl_configure_adapter, where we set adapter->dev.parent = &dev->dev (here dev is the pci dev) So at this point, the cxl adapter's device's parent is the PCI device that I want to be refcounted properly. c) init calls cxl_register_adapter *) cxl_register_adapter calls device_register(&adapter->dev) So now we're in device_register, where dev is the adapter device, and we want to know if the PCI device is safe after we return. device_register(&adapter->dev) calls device_initialize() and then device_add(). device_add() does a get_device(). device_add() also explicitly grabs the device's parent, and calls get_device() on it: parent = get_device(dev->parent); So therefore, device_register() takes a lock on the parent PCI dev, which is what pci_dev_get() was guarding. pci_dev_get() can therefore be safely removed. Fixes: f204e0b8 ("cxl: Driver code for powernv PCIe based cards for userspace access") Signed-off-by:
Daniel Axtens <dja@axtens.net> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Daniel Axtens authored
commit 9d8e2767 upstream. cxl_reset currently PERSTs the slot, and then repeatedly tries to read MMIO space in order to kick off EEH. There are 2 problems with this: it's unnecessary, and it's racy. It's unnecessary because the PERST will bring down the PHB link. That will be picked up by the CAPP, which will send out an HMI. Skiboot, noticing an HMI from the CAPP, will send an OPAL notification to the kernel, which will trigger EEH recovery. It's also racy: the EEH recovery triggered by the CAPP will eventually cause the MMIO space to have its mapping invalidated and the pointer NULLed out. This races with our attempt to read the MMIO space. This is causing OOPSes in testing. Simply drop all the attempts to force EEH detection, and trust that Skiboot will send the notification and that we'll act on it. The Skiboot code to send the EEH notification has been in Skiboot for as long as CAPP recovery has been supported, so we don't need to worry about breaking obscure setups with ancient firmware. Cc: Ryan Grimm <grimm@linux.vnet.ibm.com> Fixes: 62fa19d4 ("cxl: Add ability to reset the card") Signed-off-by:
-
Andrew Donnellan authored
commit 7c26b9cf upstream. If we open a context but do not start it (either because we do not attempt to start it, or because it fails to start for some reason), we are left with a context in state OPENED. Previously, cxl_release_context() only allowed releasing contexts in state CLOSED, so attempting to release an OPENED context would fail. In particular, this bug causes available contexts to run out after some EEH failures, where drivers attempt to release contexts that have failed to start. Allow releasing contexts in any state with a value lower than STARTED, i.e. OPENED or CLOSED (we can't release a STARTED context as it's currently using the hardware, and we assume that contexts in any new states which may be added in future with a value higher than STARTED are also unsafe to release). Fixes: 6f7f0b3d ("cxl: Add AFU virtual PHB and kernel API") Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Bob Copeland authored
commit 3633ebeb upstream. We already set a station to be associated when peering completes, both in user space and in the kernel. Thus we should always have an associated sta before sending data frames to that station. Failure to check assoc state can cause crashes in the lower-level driver due to transmitting unicast data frames before driver sta structures (e.g. ampdu state in ath9k) are initialized. This occurred when forwarding in the presence of fixed mesh paths: frames were transmitted to stations with whom we hadn't yet completed peering. Reported-by:
Alexis Green <agreen@cococorp.com> Tested-by:
Jesse Jones <jjones@cococorp.com> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Markos Chandras authored
commit c909ca71 upstream. Commit c8a34581 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions") added support for emulating the new R6 BC1{EQ,NE}Z branches but it missed the case where the instruction that caused the exception was not on a DS. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Fixes: c8a34581 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10738/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Markos Chandras authored
commit e8f80cc1 upstream. The mfhc/mthc instructions are supported on MIPS R6 so emulate them if needed. Signed-off-by:
-
Paul Burton authored
commit 90996511 upstream. Commit b677bc03 ("MIPS: cps-vec: Use macros for various arithmetics and memory operations") replaced various load & store instructions through cps-vec.S with the PTR_L & PTR_S macros. However it was somewhat overzealous in doing so for CM GCR accesses, since the bit width of the CM doesn't necessarily match that of the CPU. The registers accessed (GCR_CL_COHERENCE & GCR_CL_ID) should be safe to simply always access using 32b instructions, so do so in order to avoid issues when using a 32b CM with a 64b CPU. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10864/Signed-off-by:
-
Jean Delvare authored
commit d3d11fe0 upstream. The temperature registers appear to report values in degrees Celsius while the hwmon API mandates values to be exposed in millidegrees Celsius. Do the conversion so that the values reported by "sensors" are correct. Fixes: aed93e0b ("tg3: Add hwmon support for temperature") Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Shota Suzuki authored
commit 72ddef05 upstream. When initializing igb driver (e.g. 82576, I350), IGB_FLAG_QUEUE_PAIRS is set if adapter->rss_queues exceeds half of max_rss_queues in igb_init_queue_configuration(). On the other hand, IGB_FLAG_QUEUE_PAIRS is not set even if the number of queues exceeds half of max_combined in igb_set_channels() when changing the number of queues by "ethtool -L". In this case, if numvecs is larger than MAX_MSIX_ENTRIES (10), the size of adapter->msix_entries[], an overflow can occur in igb_set_interrupt_capability(), which in turn leads to an oops. Fix this problem as follows: - When changing the number of queues by "ethtool -L", set IGB_FLAG_QUEUE_PAIRS in the same way as initializing igb driver. - When increasing the size of q_vector, reallocate it appropriately. (With IGB_FLAG_QUEUE_PAIRS set, the size of q_vector gets larger.) Another possible way to fix this problem is to cap the queues at its initial number, which is the number of the initial online cpus. But this is not the optimal way because we cannot increase queues when another cpu becomes online. Note that before commit cd14ef54 ("igb: Change to use statically allocated array for MSIx entries"), this problem did not cause oops but just made the number of queues become 1 because of entering msi_only mode in igb_set_interrupt_capability(). Fixes: 907b7835 ("igb: Add ethtool support to configure number of channels") Signed-off-by:
Shota Suzuki <suzuki_shota_t3@lab.ntt.co.jp> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Larry Finger authored
commit 251086f5 upstream. In routine _rtl8821ae_set_media_status(), an incorrect mask results in a test for AP status to always be false. Similar bugs were fixed in rtl8192cu and rtl8192de, but this instance was missed at that time. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: David Binderman <dcb314@hotmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Adrien Schildknecht authored
commit 1642d09f upstream. The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043 Signed-off-by:
Adrien Schildknecht <adrien+dev@schischi.me> Acked-by:
-
Eric W. Biederman authored
commit 12c641ab upstream. In the logic in the initial commit of unshare made creating a new thread group for a process, contingent upon creating a new memory address space for that process. That is wrong. Two separate processes in different thread groups can share a memory address space and clone allows creation of such proceses. This is significant because it was observed that mm_users > 1 does not mean that a process is multi-threaded, as reading /proc/PID/maps temporarily increments mm_users, which allows other processes to (accidentally) interfere with unshare() calls. Correct the check in check_unshare_flags() to test for !thread_group_empty() for CLONE_THREAD, CLONE_SIGHAND, and CLONE_VM. For sighand->count > 1 for CLONE_SIGHAND and CLONE_VM. For !current_is_single_threaded instead of mm_users > 1 for CLONE_VM. By using the correct checks in unshare this removes the possibility of an accidental denial of service attack. Additionally using the correct checks in unshare ensures that only an explicit unshare(CLONE_VM) can possibly trigger the slow path of current_is_single_threaded(). As an explict unshare(CLONE_VM) is pointless it is not expected there are many applications that make that call. Fixes: b2e0d987 userns: Implement unshare of the user namespace Reported-by:
Ricky Zhou <rickyz@chromium.org> Reported-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Ming Lei authored
commit 0048b483 upstream. Inside timeout handler, blk_mq_tag_to_rq() is called to retrieve the request from one tag. This way is obviously wrong because the request can be freed any time and some fiedds of the request can't be trusted, then kernel oops might be triggered[1]. Currently wrt. blk_mq_tag_to_rq(), the only special case is that the flush request can share same tag with the request cloned from, and the two requests can't be active at the same time, so this patch fixes the above issue by updating tags->rqs[tag] with the active request(either flush rq or the request cloned from) of the tag. Also blk_mq_tag_to_rq() gets much simplified with this patch. Given blk_mq_tag_to_rq() is mainly for drivers and the caller must make sure the request can't be freed, so in bt_for_each() this helper is replaced with tags->rqs[tag]. [1] kernel oops log [ 439.696220] BUG: unable to handle kernel NULL pointer dereference at 0000000000000158^M [ 439.697162] IP: [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.700653] PGD 7ef765067 PUD 7ef764067 PMD 0 ^M [ 439.700653] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ^M [ 439.700653] Dumping ftrace buffer:^M [ 439.700653] (ftrace buffer empty)^M [ 439.700653] Modules linked in: nbd ipv6 kvm_intel kvm serio_raw^M [ 439.700653] CPU: 6 PID: 2779 Comm: stress-ng-sigfd Not tainted 4.2.0-rc5-next-20150805+ #265^M [ 439.730500] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011^M [ 439.730500] task: ffff880605308000 ti: ffff88060530c000 task.ti: ffff88060530c000^M [ 439.730500] RIP: 0010:[<ffffffff812d89ba>] [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.730500] RSP: 0018:ffff880819203da0 EFLAGS: 00010283^M [ 439.730500] RAX: ffff880811b0e000 RBX: ffff8800bb465f00 RCX: 0000000000000002^M [ 439.730500] RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000^M [ 439.730500] RBP: ffff880819203db0 R08: 0000000000000002 R09: 0000000000000000^M [ 439.730500] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000202^M [ 439.730500] R13: ffff880814104800 R14: 0000000000000002 R15: ffff880811a2ea00^M [ 439.730500] FS: 00007f165b3f5740(0000) GS:ffff880819200000(0000) knlGS:0000000000000000^M [ 439.730500] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b^M [ 439.730500] CR2: 0000000000000158 CR3: 00000007ef766000 CR4: 00000000000006e0^M [ 439.730500] Stack:^M [ 439.730500] 0000000000000008 ffff8808114eed90 ffff880819203e00 ffffffff812dc104^M [ 439.755663] ffff880819203e40 ffffffff812d9f5e 0000020000000000 ffff8808114eed80^M [ 439.755663] Call Trace:^M [ 439.755663] <IRQ> ^M [ 439.755663] [<ffffffff812dc104>] bt_for_each+0x6e/0xc8^M [ 439.755663] [<ffffffff812d9f5e>] ? blk_mq_rq_timed_out+0x6a/0x6a^M [ 439.755663] [<ffffffff812d9f5e>] ? blk_mq_rq_timed_out+0x6a/0x6a^M [ 439.755663] [<ffffffff812dc1b3>] blk_mq_tag_busy_iter+0x55/0x5e^M [ 439.755663] [<ffffffff812d88b4>] ? blk_mq_bio_to_request+0x38/0x38^M [ 439.755663] [<ffffffff812d8911>] blk_mq_rq_timer+0x5d/0xd4^M [ 439.755663] [<ffffffff810a3e10>] call_timer_fn+0xf7/0x284^M [ 439.755663] [<ffffffff810a3d1e>] ? call_timer_fn+0x5/0x284^M [ 439.755663] [<ffffffff812d88b4>] ? blk_mq_bio_to_request+0x38/0x38^M [ 439.755663] [<ffffffff810a46d6>] run_timer_softirq+0x1ce/0x1f8^M [ 439.755663] [<ffffffff8104c367>] __do_softirq+0x181/0x3a4^M [ 439.755663] [<ffffffff8104c76e>] irq_exit+0x40/0x94^M [ 439.755663] [<ffffffff81031482>] smp_apic_timer_interrupt+0x33/0x3e^M [ 439.755663] [<ffffffff815559a4>] apic_timer_interrupt+0x84/0x90^M [ 439.755663] <EOI> ^M [ 439.755663] [<ffffffff81554350>] ? _raw_spin_unlock_irq+0x32/0x4a^M [ 439.755663] [<ffffffff8106a98b>] finish_task_switch+0xe0/0x163^M [ 439.755663] [<ffffffff8106a94d>] ? finish_task_switch+0xa2/0x163^M [ 439.755663] [<ffffffff81550066>] __schedule+0x469/0x6cd^M [ 439.755663] [<ffffffff8155039b>] schedule+0x82/0x9a^M [ 439.789267] [<ffffffff8119b28b>] signalfd_read+0x186/0x49a^M [ 439.790911] [<ffffffff8106d86a>] ? wake_up_q+0x47/0x47^M [ 439.790911] [<ffffffff811618c2>] __vfs_read+0x28/0x9f^M [ 439.790911] [<ffffffff8117a289>] ? __fget_light+0x4d/0x74^M [ 439.790911] [<ffffffff811620a7>] vfs_read+0x7a/0xc6^M [ 439.790911] [<ffffffff8116292b>] SyS_read+0x49/0x7f^M [ 439.790911] [<ffffffff81554c17>] entry_SYSCALL_64_fastpath+0x12/0x6f^M [ 439.790911] Code: 48 89 e5 e8 a9 b8 e7 ff 5d c3 0f 1f 44 00 00 55 89 f2 48 89 e5 41 54 41 89 f4 53 48 8b 47 60 48 8b 1c d0 48 8b 7b 30 48 8b 53 38 <48> 8b 87 58 01 00 00 48 85 c0 75 09 48 8b 97 88 0c 00 00 eb 10 ^M [ 439.790911] RIP [<ffffffff812d89ba>] blk_mq_tag_to_rq+0x21/0x6e^M [ 439.790911] RSP <ffff880819203da0>^M [ 439.790911] CR2: 0000000000000158^M [ 439.790911] ---[ end trace d40af58949325661 ]---^M Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Ming Lei authored
commit 596f5aad upstream. There may be lots of pending requests so that the buffer of PAGE_SIZE can't hold them at all. One typical example is scsi-mq, the queue depth(.can_queue) of scsi_host and blk-mq is quite big but scsi_device's queue_depth is a bit small(.cmd_per_lun), then it is quite easy to have lots of pending requests in hw queue. This patch fixes the following warning and the related memory destruction. [ 359.025101] fill_read_buffer: blk_mq_hw_sysfs_show+0x0/0x7d returned bad count^M [ 359.055595] irq event stamp: 15537^M [ 359.055606] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ^M [ 359.055614] Dumping ftrace buffer:^M [ 359.055660] (ftrace buffer empty)^M [ 359.055672] Modules linked in: nbd ipv6 kvm_intel kvm serio_raw^M [ 359.055678] CPU: 4 PID: 21631 Comm: stress-ng-sysfs Not tainted 4.2.0-rc5-next-20150805 #434^M [ 359.055679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011^M [ 359.055682] task: ffff8802161cc000 ti: ffff88021b4a8000 task.ti: ffff88021b4a8000^M [ 359.055693] RIP: 0010:[<ffffffff811541c5>] [<ffffffff811541c5>] __kmalloc+0xe8/0x152^M Signed-off-by:
-
Christophe Ricard authored
commit 5a9e0ffc upstream. skb can be NULL and may lead to a NULL pointer error. Add a check condition before setting HCI rx buffer. Signed-off-by:
Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Christophe Ricard authored
commit adca3c38 upstream. When NFC_ATTR_VENDOR_DATA is not set, data_len is 0 and data is NULL. Fixes the following warning: net/nfc/netlink.c:1536:3: warning: 'data' may be used uninitialized +in this function [-Wmaybe-uninitialized] return cmd->doit(dev, data, data_len); Signed-off-by:
-
Christophe Ricard authored
commit fe202fe9 upstream. NFC_ATTR_VENDOR_DATA is an optional vendor_cmd argument. The current code was potentially using a non existing argument leading to potential catastrophic results. Signed-off-by:
-
Christophe Ricard authored
commit 8b706884 upstream. PCB_SYNC different than PCB_TYPE_SUPERVISOR or PCB_TYPE_DATAFRAME should be discarded. Irrelevant data may be forwarded up to the ndlc state machine by phys like spi to prevent missing potential data during "write" transactions. Signed-off-by:
-
Christophe Ricard authored
commit 1d816b6e upstream. When receiving a NDLC PCB_SYNC_ACK the pending data was never removed from ack_pending_q and cleared. Signed-off-by:
-
Christophe Ricard authored
commit daaf1e1f upstream. st_nci_hci_load_session() calls kfree_skb() on unitialized variables skb_pipe_info and skb_pipe_list if the call to nci_hci_connect_gate() failed. Reword the error path to not use these variables when they are not initialized. While at it, there seemed to be a memory leak because skb_pipe_info was only freed once, after the for-loop, even though several ones were created by nci_hci_send_cmd. Acked-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
-
Christophe Ricard authored
commit 5a357006 upstream. st21nfca_hci_load_session() calls kfree_skb() on unitialized variables skb_pipe_info and skb_pipe_list if the call to nfc_hci_connect_gate() failed. Reword the error path to not use these variables when they are not initialized. While at it, there seemed to be a memory leak because skb_pipe_info was only freed once, after the for-loop, even though several ones were created by nfc_hci_send_cmd. Fixes: ec03ff1a ("NFC: st21nfca: Remove skb_pipe_list and skb_pipe_info useless allocation") Acked-by:
-
Christophe Ricard authored
commit e7723b33 upstream. Due to a copy and paste error st_nci_i2c_read still contains st21nfca header comment. Signed-off-by:
-
Christophe Ricard authored
commit 30458aac upstream. Replace ST21NFCB with ST_NCI or st21nfcb with st_nci as it was forgotten in commit "nfc: st-nci: Rename st21nfcb to st-nci" ed06aeefSigned-off-by:
-
Christophe Ricard authored
commit 76b733d1 upstream. commit "nfc: st-nci: Rename st21nfcb to st-nci" adds include/linux/platform_data/st_nci.h duplicated with include/linux/platform_data/st-nci.h. Only drivers/nfc/st-nci/i2c.c uses platform_data/st_nci.h. Reported-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
- 21 Sep, 2015 2 commits
-
-
Greg Kroah-Hartman authored
-
Caesar Wang authored
commit cb8cc37f upstream. The following was seen in branch[0] build. arch/arm/mach-rockchip/platsmp.c:154:23: error: 'rockchip_secondary_startup' undeclared (first use in this function) branch[0]: git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git v4.3-armsoc/soc The broken build is caused by the commit fe4407c0 ("ARM: rockchip: fix the CPU soft reset"). Signed-off-by:
Caesar Wang <wxt@rock-chips.com> The breakage was a result of it being wrongly merged in my branch with the cache invalidation rework from Russell 02b4e275 ("ARM: v7 setup function should invalidate L1 cache"). Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
