Pull HID fixes from Jiri Kosina:
 "Two last-minute regression fixes for Wacom driver from Jason Gerecke"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Override incorrect logical maximum contact identifier
  HID: wacom: Treat HID_DG_TOOLSERIALNUMBER as unsigned

Pull s390 fix from Martin Schwidefsky:
 "There is one more fix I would like to see in 4.11: The combination of
  KVM, CMMA and heavy paging can cause data corruption, the fix is to
  clear the _PAGE_UNUSED bit in set_pte_at()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: fix CMMA vs KSM vs others

Pull keyrings fixes from David Howells:

 (1) Disallow keyrings whose name begins with a '.' to be joined
     [CVE-2016-9604].

 (2) Change the name of the dead type to ".dead" to prevent user access
     [CVE-2017-6951].

 (3) Fix keyctl_set_reqkey_keyring() to not leak thread keyrings
     [CVE-2017-7472]

* tag 'keys-fixes-20170419' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  KEYS: fix keyctl_set_reqkey_keyring() to not leak thread keyrings
  KEYS: Change the name of the dead type to ".dead" to prevent user access
  KEYS: Disallow keyrings beginning with '.' to be joined as session keyrings

It apears that devices designed around Wacom's G11 chipset (e.g. Lenovo
ThinkPad Yoga 260, Lenovo ThinkPad X1 Yoga, Dell XPS 12 9250, Dell Venue
8 Pro 5855, etc.) suffer from a common issue in their HID descriptors.
The logical maximum is not updated for the "Contact Identifier" usage,
leaving it as just "1" despite these devices being capable of tracking
far more touches.

Commit 60a22186 began ignoring usages with out-of-range values,
causing problems for devices based on this chipset. Touches after
the first will have an out-of-range Contact Identifier, and ignoring
that usage will cause the kernel to incorrectly slot each finger's
events (along with all the knock-on userspace effects that entails).

This commit checks for these buggy descriptors and updates the maximum
where required. Prior chipsets have used "255" as the maximum (and the
G11, at least, doesn't seem to actually use IDs outside the range of
1..CONTACTMAX) so continue using this value.

Cc: stable@vger.kernel.org
Fixes: 60a22186 ("HID: wacom: generic: add support for touchring")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull clk fixes from Stephen Boyd"

 - one stm32f4 fix for a change that introduced the PLL_I2S and PLL_SAI
   boards

 - two Allwinner clk driver build fixes

 - two Allwinner CPU clk driver fixes where we see random CPUFreq
   crashes because the CPU's PLL locks up sometimes when we change the
   rate

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sunxi-ng: a33: gate then ungate PLL CPU clk after rate change
  clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks
  clk: sunxi-ng: fix build failure in ccu-sun9i-a80 driver
  clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER
  clk: stm32f4: fix: exclude values 0 and 1 for PLLQ

Pull CIFS fix from Steve French:
 "One more cifs fix for stable"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Do not send echoes before Negotiate is complete

Andrey reported a use-after-free in __ns_get_path():

  spin_lock include/linux/spinlock.h:299 [inline]
  lockref_get_not_dead+0x19/0x80 lib/lockref.c:179
  __ns_get_path+0x197/0x860 fs/nsfs.c:66
  open_related_ns+0xda/0x200 fs/nsfs.c:143
  sock_ioctl+0x39d/0x440 net/socket.c:1001
  vfs_ioctl fs/ioctl.c:45 [inline]
  do_vfs_ioctl+0x1bf/0x1780 fs/ioctl.c:685
  SYSC_ioctl fs/ioctl.c:700 [inline]
  SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691

We are under rcu read lock protection at that point:

        rcu_read_lock();
        d = atomic_long_read(&ns->stashed);
        if (!d)
                goto slow;
        dentry = (struct dentry *)d;
        if (!lockref_get_not_dead(&dentry->d_lockref))
                goto slow;
        rcu_read_unlock();

but don't use a proper RCU API on the free path, therefore a parallel
__d_free() could free it at the same time.  We need to mark the stashed
dentry with DCACHE_RCUACCESS so that __d_free() will be called after all
readers leave RCU.

Fixes: e149ed2b ("take the targets of /proc/*/ns/* symlinks to separate fs")
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Geert has reported a freeze during PM resume and some additional
debugging has shown that the device_resume worker cannot make a forward
progress because it waits for an event which is stuck waiting in
drain_all_pages:

  INFO: task kworker/u4:0:5 blocked for more than 120 seconds.
        Not tainted 4.11.0-rc7-koelsch-00029-g005882e5-dirty #3476
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  kworker/u4:0    D    0     5      2 0x00000000
  Workqueue: events_unbound async_run_entry_fn
    __schedule
    schedule
    schedule_timeout
    wait_for_common
    dpm_wait_for_superior
    device_resume
    async_resume
    async_run_entry_fn
    process_one_work
    worker_thread
    kthread
  [...]
  bash            D    0  1703   1694 0x00000000
    __schedule
    schedule
    schedule_timeout
    wait_for_common
    flush_work
    drain_all_pages
    start_isolate_page_range
    alloc_contig_range
    cma_alloc
    __alloc_from_contiguous
    cma_allocator_alloc
    __dma_alloc
    arm_dma_alloc
    sh_eth_ring_init
    sh_eth_open
    sh_eth_resume
    dpm_run_callback
    device_resume
    dpm_resume
    dpm_resume_end
    suspend_devices_and_enter
    pm_suspend
    state_store
    kernfs_fop_write
    __vfs_write
    vfs_write
    SyS_write
  [...]
  Showing busy workqueues and worker pools:
  [...]
  workqueue mm_percpu_wq: flags=0xc
    pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=0/0
      delayed: drain_local_pages_wq, vmstat_update
    pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=0/0
      delayed: drain_local_pages_wq BAR(1703), vmstat_update

Tetsuo has properly noted that mm_percpu_wq is created as WQ_FREEZABLE
so it is frozen this early during resume so we are effectively
deadlocked.  Fix this by dropping WQ_FREEZABLE when creating
mm_percpu_wq.  We really want to have it operational all the time.

Fixes: ce612879 ("mm: move pcp and lru-pcp draining into single wq")
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull backlight fix from Daniel Thompson:
 "Normally pull requests for backlight come from Lee Jones (and will
  continue to do so) but the bug fixed here is annoying for few people
  so I'm providing a little holiday cover.

  Fix a single bug in the PWM backlight driver and make it play nice
  with a wider range of GPIO devices. This bug is a regression and was
  independently discovered by Geert Uytterhoevan and Paul Kocialkowski
  (and is tested by both)"

* tag 'backlight-for-v4.11' of git://git.linaro.org/people/daniel.thompson/linux:
  backlight: pwm_bl: Fix GPIO out for unimplemented .get_direction()

Commit 7613c922 ("backlight: pwm_bl: Move the checks for initial
power state to a separate function") not just moved some code, but made
slight changes in semantics.

If a gpiochip doesn't implement the optional .get_direction() callback,
gpiod_get_direction always returns -EINVAL, which is never equal to
GPIOF_DIR_IN, leading to the GPIO not being configured for output.

To avoid this, invert the test and check for not GPIOF_DIR_OUT instead,
like the original code did.

This restores the display on r8a7740/armadillo.

Fixes: 7613c922 ("backlight: pwm_bl: Move the checks for initial power state to a separate function")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

Because HID_DG_TOOLSERIALNUMBER doesn't first cast the value recieved from HID
to an unsigned type, sign-extension rules can cause the value of
wacom_wac->serial[0] to inadvertently wind up with all 32 of its highest bits
set if the highest bit of "value" was set.

This can cause problems for Tablet PC devices which use AES sensors and the
xf86-input-wacom userspace driver. It is not uncommon for AES sensors to send a
serial number of '0' while the pen is entering or leaving proximity. The
xf86-input-wacom driver ignores events with a serial number of '0' since it
cannot match them up to an in-use tool.  To ensure the xf86-input-wacom driver
does not ignore the final out-of-proximity event, the kernel does not send
MSC_SERIAL events when the value of wacom_wac->serial[0] is '0'. If the highest
bit of HID_DG_TOOLSERIALNUMBER is set by an in-prox pen which later leaves
proximity and sends a '0' for HID_DG_TOOLSERIALNUMBER, then only the lowest 32
bits of wacom_wac->serial[0] are actually cleared, causing the kernel to send
an MSC_SERIAL event. Since the 'input_event' function takes an 'int' as
argument, only those lowest (now-cleared) 32 bits of wacom_wac->serial[0] are
sent to userspace, causing xf86-input-wacom to ignore the event. If the event
was the final out-of-prox event, then xf86-input-wacom may remain in a state
where it believes the pen is in proximity and refuses to allow other devices
under its control (e.g. the touchscreen) to move the cursor.

It should be noted that EMR devices and devices which use both the
HID_DG_TOOLSERIALNUMBER and WACOM_HID_WD_SERIALHI usages (in that order) would
be immune to this issue. It appears only AES devices are affected.

Fixes: f85c9dc6 ("HID: wacom: generic: Support tool ID and additional tool types")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull sparc fixes from David Miller:
 "Two Sparc bug fixes from Daniel Jordan and Nitin Gupta"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix hugepage page table free
  sparc64: Use LOCKDEP_SMALL, not PROVE_LOCKING_SMALL

Pull networking fixes from David Miller:

 1) BPF tail call handling bug fixes from Daniel Borkmann.

 2) Fix allowance of too many rx queues in sfc driver, from Bert
    Kenward.

 3) Non-loopback ipv6 packets claiming src of ::1 should be dropped,
    from Florian Westphal.

 4) Statistics requests on KSZ9031 can crash, fix from Grygorii
    Strashko.

 5) TX ring handling fixes in mediatek driver, from Sean Wang.

 6) ip_ra_control can deadlock, fix lock acquisition ordering to fix,
    from Cong WANG.

 7) Fix use after free in ip_recv_error(), from Willem de Buijn.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  bpf: fix checking xdp_adjust_head on tail calls
  bpf: fix cb access in socket filter programs on tail calls
  ipv6: drop non loopback packets claiming to originate from ::1
  net: ethernet: mediatek: fix inconsistency of port number carried in TXD
  net: ethernet: mediatek: fix inconsistency between TXD and the used buffer
  net: phy: micrel: fix crash when statistic requested for KSZ9031 phy
  net: vrf: Fix setting NLM_F_EXCL flag when adding l3mdev rule
  net: thunderx: Fix set_max_bgx_per_node for 81xx rgx
  net-timestamp: avoid use-after-free in ip_recv_error
  ipv4: fix a deadlock in ip_ra_control
  sfc: limit the number of receive queues

Make sure the start adderess is aligned to PMD_SIZE
boundary when freeing page table backing a hugepage
region. The issue was causing segfaults when a region
backed by 64K pages was unmapped since such a region
is in general not PMD_SIZE aligned.
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CONFIG_PROVE_LOCKING_SMALL shrinks the memory usage of lockdep so the
kernel text, data, and bss fit in the required 32MB limit, but this
option is not set for every config that enables lockdep.

A 4.10 kernel fails to boot with the console output

    Kernel: Using 8 locked TLB entries for main kernel image.
    hypervisor_tlb_lock[2000000:0:8000000071c007c3:1]: errors with f
    Program terminated

with these config options

    CONFIG_LOCKDEP=y
    CONFIG_LOCK_STAT=y
    CONFIG_PROVE_LOCKING=n

To fix, rename CONFIG_PROVE_LOCKING_SMALL to CONFIG_LOCKDEP_SMALL, and
enable this option with CONFIG_LOCKDEP=y so we get the reduced memory
usage every time lockdep is turned on.

Tested that CONFIG_LOCKDEP_SMALL is set to 'y' if and only if
CONFIG_LOCKDEP is set to 'y'.  When other lockdep-related config options
that select CONFIG_LOCKDEP are enabled (e.g. CONFIG_LOCK_STAT or
CONFIG_PROVE_LOCKING), verified that CONFIG_LOCKDEP_SMALL is also
enabled.

Fixes: e6b5f1be ("config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ftrace testcase update from Steven Rostedt:
 "While testing my development branch, without the fix for the pid use
  after free bug, the selftest that Namhyung added triggers it. I
  figured it would be good to add the test for the bug after the fix,
  such that it does not exist without the fix.

  I added another patch that lets the test only test part of the pid
  filtering, and ignores the function-fork (filtering on children as
  well) if the function-fork feature does not exist. This feature is
  added by Namhyung just before he added this test. But since the test
  tests both with and without the feature, it would be good to let it
  not fail if the feature does not exist"

* tag 'trace-v4.11-rc5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests: ftrace: Add check for function-fork before running pid filter test
  selftests: ftrace: Add a testcase for function PID filter

Have the func-filter-pid test check for the function-fork option before
testing it. It can still test the pid filtering, but will stop before
testing the function-fork option for children inheriting the pids.
This allows the test to be added before the function-fork feature, but after
a bug fix that triggers one of the bugs the test can cause.

Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull ftrace fix from Steven Rostedt:
 "Namhyung Kim discovered a use after free bug. It has to do with adding
  a pid filter to function tracing in an instance, and then freeing the
  instance"

* tag 'trace-v4.11-rc5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix function pid filter on instances

Pull crypto fixes from Herbert Xu:
 "This fixes the following problems:

   - regression in new XTS/LRW code when used with async crypto

   - long-standing bug in ahash API when used with certain algos

   - bogus memory dereference in async algif_aead with certain algos"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_aead - Fix bogus request dereference in completion function
  crypto: ahash - Fix EINPROGRESS notification callback
  crypto: lrw - Fix use-after-free on EINPROGRESS
  crypto: xts - Fix use-after-free on EINPROGRESS

Like event pid filtering test, add function pid filtering test with the
new "function-fork" option.  It also tests it on an instance directory
so that it can verify the bug related pid filtering on instances.

Link: http://lkml.kernel.org/r/20170417024430.21194-5-namhyung@kernel.org

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

This fixes CVE-2017-7472.

Running the following program as an unprivileged user exhausts kernel
memory by leaking thread keyrings:

	#include <keyutils.h>

	int main()
	{
		for (;;)
			keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_THREAD_KEYRING);
	}

Fix it by only creating a new thread keyring if there wasn't one before.
To make things more consistent, make install_thread_keyring_to_cred()
and install_process_keyring_to_cred() both return 0 if the corresponding
keyring is already present.

Fixes: d84f4f99 ("CRED: Inaugurate COW credentials")
Cc: stable@vger.kernel.org # 2.6.29+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>

This fixes CVE-2017-6951.

Userspace should not be able to do things with the "dead" key type as it
doesn't have some of the helper functions set upon it that the kernel
needs.  Attempting to use it may cause the kernel to crash.

Fix this by changing the name of the type to ".dead" so that it's rejected
up front on userspace syscalls by key_get_type_from_user().

Though this doesn't seem to affect recent kernels, it does affect older
ones, certainly those prior to:

	commit c06cfb08
	Author: David Howells <dhowells@redhat.com>
	Date:   Tue Sep 16 17:36:06 2014 +0100
	KEYS: Remove key_type::match in favour of overriding default by match_preparse

which went in before 3.18-rc1.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org

This fixes CVE-2016-9604.

Keyrings whose name begin with a '.' are special internal keyrings and so
userspace isn't allowed to create keyrings by this name to prevent
shadowing.  However, the patch that added the guard didn't fix
KEYCTL_JOIN_SESSION_KEYRING.  Not only can that create dot-named keyrings,
it can also subscribe to them as a session keyring if they grant SEARCH
permission to the user.

This, for example, allows a root process to set .builtin_trusted_keys as
its session keyring, at which point it has full access because now the
possessor permissions are added.  This permits root to add extra public
keys, thereby bypassing module verification.

This also affects kexec and IMA.

This can be tested by (as root):

	keyctl session .builtin_trusted_keys
	keyctl add user a a @s
	keyctl list @s

which on my test box gives me:

	2 keys in keyring:
	180010936: ---lswrv     0     0 asymmetric: Build time autogenerated kernel key: ae3d4a31b82daa8e1a75b49dc2bba949fd992a05
	801382539: --alswrv     0     0 user: a


Fix this by rejecting names beginning with a '.' in the keyctl.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
cc: linux-ima-devel@lists.sourceforge.net
cc: stable@vger.kernel.org

Pull parisc fix from Helge Deller:
 "One patch which fixes get_user() for 64-bit values on 32-bit kernels.

  Up to now we lost the upper 32-bits of the returned 64-bit value"

* 'parisc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix get_user() for 64-bit value on 32-bit kernel

commit 4fcd1813 ("Fix reconnect to not defer smb3 session reconnect
long after socket reconnect") added support for Negotiate requests to
be initiated by echo calls.

To avoid delays in calling echo after a reconnect, I added the patch
introduced by the commit b8c60012 ("Call echo service immediately
after socket reconnect").

This has however caused a regression with cifs shares which do not have
support for echo calls to trigger Negotiate requests. On connections
which need to call Negotiation, the echo calls trigger an error which
triggers a reconnect which in turn triggers another echo call. This
results in a loop which is only broken when an operation is performed on
the cifs share. For an idle share, it can DOS a server.

The patch uses the smb_operation can_echo() for cifs so that it is
called only if connection has been already been setup.

kernel bz: 194531
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>

When function tracer has a pid filter, it adds a probe to sched_switch
to track if current task can be ignored.  The probe checks the
ftrace_ignore_pid from current tr to filter tasks.  But it misses to
delete the probe when removing an instance so that it can cause a crash
due to the invalid tr pointer (use-after-free).

This is easily reproducible with the following:

  # cd /sys/kernel/debug/tracing
  # mkdir instances/buggy
  # echo $$ > instances/buggy/set_ftrace_pid
  # rmdir instances/buggy

  ============================================================================
  BUG: KASAN: use-after-free in ftrace_filter_pid_sched_switch_probe+0x3d/0x90
  Read of size 8 by task kworker/0:1/17
  CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G    B           4.11.0-rc3  #198
  Call Trace:
   dump_stack+0x68/0x9f
   kasan_object_err+0x21/0x70
   kasan_report.part.1+0x22b/0x500
   ? ftrace_filter_pid_sched_switch_probe+0x3d/0x90
   kasan_report+0x25/0x30
   __asan_load8+0x5e/0x70
   ftrace_filter_pid_sched_switch_probe+0x3d/0x90
   ? fpid_start+0x130/0x130
   __schedule+0x571/0xce0
   ...

To fix it, use ftrace_clear_pids() to unregister the probe.  As
instance_rmdir() already updated ftrace codes, it can just free the
filter safely.

Link: http://lkml.kernel.org/r/20170417024430.21194-2-namhyung@kernel.org

Fixes: 0c8916c3 ("tracing: Add rmdir to remove multibuffer instances")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Daniel Borkmann says:

====================
Two BPF fixes

The set fixes cb_access and xdp_adjust_head bits in struct bpf_prog,
that are used for requirement checks on the program rather than f.e.
heuristics. Thus, for tail calls, we cannot make any assumptions and
are forced to set them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 17bedab2 ("bpf: xdp: Allow head adjustment in XDP prog")
added the xdp_adjust_head bit to the BPF prog in order to tell drivers
that the program that is to be attached requires support for the XDP
bpf_xdp_adjust_head() helper such that drivers not supporting this
helper can reject the program. There are also drivers that do support
the helper, but need to check for xdp_adjust_head bit in order to move
packet metadata prepended by the firmware away for making headroom.

For these cases, the current check for xdp_adjust_head bit is insufficient
since there can be cases where the program itself does not use the
bpf_xdp_adjust_head() helper, but tail calls into another program that
uses bpf_xdp_adjust_head(). As such, the xdp_adjust_head bit is still
set to 0. Since the first program has no control over which program it
calls into, we need to assume that bpf_xdp_adjust_head() helper is used
upon tail calls. Thus, for the very same reasons in cb_access, set the
xdp_adjust_head bit to 1 when the main program uses tail calls.

Fixes: 17bedab2 ("bpf: xdp: Allow head adjustment in XDP prog")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ff936a04 ("bpf: fix cb access in socket filter programs")
added a fix for socket filter programs such that in i) AF_PACKET the
20 bytes of skb->cb[] area gets zeroed before use in order to not leak
data, and ii) socket filter programs attached to TCP/UDP sockets need
to save/restore these 20 bytes since they are also used by protocol
layers at that time.

The problem is that bpf_prog_run_save_cb() and bpf_prog_run_clear_cb()
only look at the actual attached program to determine whether to zero
or save/restore the skb->cb[] parts. There can be cases where the
actual attached program does not access the skb->cb[], but the program
tail calls into another program which does access this area. In such
a case, the zero or save/restore is currently not performed.

Since the programs we tail call into are unknown at verification time
and can dynamically change, we need to assume that whenever the attached
program performs a tail call, that later programs could access the
skb->cb[], and therefore we need to always set cb_access to 1.

Fixes: ff936a04 ("bpf: fix cb access in socket filter programs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We lack a saddr check for ::1. This causes security issues e.g. with acls
permitting connections from ::1 because of assumption that these originate
from local machine.

Assuming a source address of ::1 is local seems reasonable.
RFC4291 doesn't allow such a source address either, so drop such packets.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'sunxi-clk-fixes-for-4.11-2-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes

Pull Allwinner clock fixes for 4.11 from Maxime Ripard:

Two build errors fixes for the sunxi-ng drivers.

The two other patches fix random CPU crashes happening on the A33 since
CPUFreq has been enabled in 4.11.

* tag 'sunxi-clk-fixes-for-4.11-2-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: a33: gate then ungate PLL CPU clk after rate change
  clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks
  clk: sunxi-ng: fix build failure in ccu-sun9i-a80 driver
  clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER

Sean Wang says:

====================
mediatek: Fix crash caused by reporting inconsistent skb->len to BQL

Changes since v1:
- fix inconsistent enumeration which easily causes the potential bug

The series fixes kernel BUG caused by inconsistent SKB length reported
into BQL. The reason for inconsistent length comes from hardware BUG which
results in different port number carried on the TXD within the lifecycle of
SKB. So patch 2) is proposed for use a software way to track which port
the SKB involving instead of hardware way. And patch 1) is given for another
issue I found which causes TXD and SKB inconsistency that is not expected
in the initial logic, so it is also being corrected it in the series.

The log for the kernel BUG caused by the issue is posted as below.

[  120.825955] kernel BUG at ... lib/dynamic_queue_limits.c:26!
[  120.837684] Internal error: Oops - BUG: 0 [#1] SMP ARM
[  120.842778] Modules linked in:
[  120.845811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-191576-gdbcef47 #35
[  120.853488] Hardware name: Mediatek Cortex-A7 (Device Tree)
[  120.859012] task: c1007480 task.stack: c1000000
[  120.863510] PC is at dql_completed+0x108/0x17c
[  120.867915] LR is at 0x46
[  120.870512] pc : [<c03c19c8>]    lr : [<00000046>]    psr: 80000113
[  120.870512] sp : c1001d58  ip : c1001d80  fp : c1001d7c
[  120.881895] r10: 0000003e  r9 : df6b3400  r8 : 0ed86506
[  120.887075] r7 : 00000001  r6 : 00000001  r5 : 0ed8654c  r4 : df0135d8
[  120.893546] r3 : 00000001  r2 : df016800  r1 : 0000fece  r0 : df6b3480
[  120.900018] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  120.907093] Control: 10c5387d  Table: 9e27806a  DAC: 00000051
[  120.912789] Process swapper/0 (pid: 0, stack limit = 0xc1000218)
[  120.918744] Stack: (0xc1001d58 to 0xc1002000)

....

121.085331] 1fc0: 00000000 c0a52a28 00000000 c10855d4 c1003c58 c0a52a24 c100885c 8000406a
[  121.093444] 1fe0: 410fc073 00000000 00000000 c1001ff8 8000807c c0a009cc 00000000 00000000
[  121.101575] [<c03c19c8>] (dql_completed) from [<c04cb010>] (mtk_napi_tx+0x1d0/0x37c)
[  121.109263] [<c04cb010>] (mtk_napi_tx) from [<c05e28cc>] (net_rx_action+0x24c/0x3b8)
[  121.116951] [<c05e28cc>] (net_rx_action) from [<c010152c>] (__do_softirq+0xe4/0x35c)
[  121.124638] [<c010152c>] (__do_softirq) from [<c012a624>] (irq_exit+0xe8/0x150)
[  121.131895] [<c012a624>] (irq_exit) from [<c017750c>] (__handle_domain_irq+0x70/0xc4)
[  121.139666] [<c017750c>] (__handle_domain_irq) from [<c0101404>] (gic_handle_irq+0x58/0x9c)
[  121.147953] [<c0101404>] (gic_handle_irq) from [<c010e18c>] (__irq_svc+0x6c/0x90)
[  121.155373] Exception stack(0xc1001ef8 to 0xc1001f40)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix port inconsistency on TXD due to hardware BUG that would cause
different port number is carried on the same TXD between tx_map()
and tx_unmap() with the iperf test. It would cause confusing BQL
logic which leads to kernel panic when dual GMAC runs concurrently.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix inconsistency between the TXD descriptor and the used buffer that
would cause unexpected logic at mtk_tx_unmap() during skb housekeeping.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now the command:
	ethtool --phy-statistics eth0
will cause system crash with meassage "Unable to handle kernel NULL pointer
dereference at virtual address 00000010" from:

 (kszphy_get_stats) from [<c069f1d8>] (ethtool_get_phy_stats+0xd8/0x210)
 (ethtool_get_phy_stats) from [<c06a0738>] (dev_ethtool+0x5b8/0x228c)
 (dev_ethtool) from [<c06b5484>] (dev_ioctl+0x3fc/0x964)
 (dev_ioctl) from [<c0679f7c>] (sock_ioctl+0x170/0x2c0)
 (sock_ioctl) from [<c02419d4>] (do_vfs_ioctl+0xa8/0x95c)
 (do_vfs_ioctl) from [<c02422c4>] (SyS_ioctl+0x3c/0x64)
 (SyS_ioctl) from [<c0107d60>] (ret_fast_syscall+0x0/0x44)

The reason: phy_driver structure for KSZ9031 phy has no .probe() callback
defined. As result, struct phy_device *phydev->priv pointer will not be
initializes (null).
This issue will affect also following phys:
 KSZ8795, KSZ886X, KSZ8873MLL, KSZ9031, KSZ9021, KSZ8061, KS8737

Fix it by:
- adding .probe() = kszphy_probe() callback to KSZ9031, KSZ9021
phys. The kszphy_probe() can be re-used as it doesn't do any phy specific
settings.
- removing statistic callbacks from other phys (KSZ8795, KSZ886X,
KSZ8873MLL, KSZ8061, KS8737) as they doesn't have corresponding
statistic counters.

Fixes: 2b2427d0 ("phy: micrel: Add ethtool statistics counters")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only need 1 l3mdev FIB rule. Fix setting NLM_F_EXCL in the nlmsghdr.

Fixes: 1aa6c4f6 ("net: vrf: Add l3mdev rules on first device create")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the PCI_SUBSYS_DEVID_81XX_RGX and use the same to set
the max bgx per node count.

This fixes the issue intoduced by following commit
78aacb6f net: thunderx: Fix invalid mac addresses for node1 interfaces
With this commit the max_bgx_per_node for 81xx is set as 2 instead of 3
because of which num_vfs is always calculated as zero.
Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzkaller reported a use-after-free in ip_recv_error at line

    info->ipi_ifindex = skb->dev->ifindex;

This function is called on dequeue from the error queue, at which
point the device pointer may no longer be valid.

Save ifindex on enqueue in __skb_complete_tx_timestamp, when the
pointer is valid or NULL. Store it in temporary storage skb->cb.

It is safe to reference skb->dev here, as called from device drivers
or dev_queue_xmit. The exception is when called from tcp_ack_tstamp;
in that case it is NULL and ifindex is set to 0 (invalid).

Do not return a pktinfo cmsg if ifindex is 0. This maintains the
current behavior of not returning a cmsg if skb->dev was NULL.

On dequeue, the ipv4 path will cast from sock_exterr_skb to
in_pktinfo. Both have ifindex as their first element, so no explicit
conversion is needed. This is by design, introduced in commit
0b922b7a ("net: original ingress device index in PKTINFO"). For
ipv6 ip6_datagram_support_cmsg converts to in6_pktinfo.

Fixes: 829ae9d6 ("net-timestamp: allow reading recv cmsg on errqueue with origin tstamp")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to commit 87e9f031
("ipv4: fix a potential deadlock in mcast getsockopt() path"),
there is a deadlock scenario for IP_ROUTER_ALERT too:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock(sk_lock-AF_INET);
                               lock(rtnl_mutex);
  lock(sk_lock-AF_INET);

Fix this by always locking RTNL first on all setsockopt() paths.

Note, after this patch ip_ra_lock is no longer needed either.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The number of rx queues is determined by the rss_cpus parameter
or the cpu topology. If that is higher than EFX_MAX_RX_QUEUES the
driver can corrupt state.

Fixes: 8ceee660 ("New driver "sfc" for Solarstorm SFC4000 controller.")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>