- 31 Jan, 2017 4 commits
-
-
Harald Freudenberger authored
During tests the Kernel complained about inconsistend lock state: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. Now all the queue locks use spin_lock_bh/spin_unlock_bh. Signed-off-by:Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Harald Freudenberger authored
The generate_entropy function used a sha256 for compacting together 256 bits of entropy into 32 bytes hash. However, it is questionable if a sha256 can really be used here, as potential collisions may reduce the max entropy fitting into a 32 byte hash value. So this batch introduces the use of sha512 instead and the required buffer adjustments for the calling functions. Further more the working buffer for the generate_entropy function has been widened from one page to two pages. So now 1024 stckf invocations are used to gather 256 bits of entropy. This has been done to be on the save side if the jitters of stckf values isn't as good as supposed. Signed-off-by:
-
Harald Freudenberger authored
In fips mode only xts keys with 128 bit or 125 bit are allowed. This fix extends the xts_aes_set_key function to check for these valid key lengths in fips mode. Signed-off-by:
-
Matthew Rosato authored
Triple-DES implementations will soon be required to check for uniqueness of keys with fips mode enabled. Add checks to ensure none of the 3 keys match. Signed-off-by:
Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by:
-
- 16 Jan, 2017 30 commits
-
-
Daniel Borkmann authored
After we already allocated the jit.prg_buf image via bpf_jit_binary_alloc() and filled it out with instructions, jit.prg_buf cannot be NULL anymore. Thus, remove the unnecessary check. Tested on s390x with test_bpf module. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Sebastian Ott authored
This is a leftover from the 31 bit era to avoid 64 bit divisions. Get rid of it. Reported-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Use the early sclp code to provide a boot console. This boot console is available if the kernel parameter "earlyprintk" has been specified, just like it works for other architectures that also provide an early boot console. This makes debugging of early problems much easier, since now we finally have working console output even before memory detection is running. The boot console will be automatically disabled as soon as another console will be registered. Reviewed-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Make sure the _sclp_print_lm function stays within bounds of the early sccb, even if the passed string is very long. If the string is too long, the remaining characters will be dropped. Suggested-by:
-
Heiko Carstens authored
Make the early sclp interrupt handler more robust: - disable all interrupt sub classes except for the service signal subclass - extend ctlreg0 union so it is easily possible to set the service signal subclass mask bit without using a magic number - disable lowcore protection before writing to it - make sure that all write accesses are done before the original content of control register 0 is restored, which could enable lowcore protection Reviewed-by:
-
Heiko Carstens authored
The "topology=off" kernel parameter is supposed to prevent the kernel to use hardware topology information to generate scheduling domains etc. For an unknown reason I implemented this in a very odd way back then: instead of simply clearing the MACHINE_HAS_TOPOLOGY flag within the lowcore I added a second variable which indicated that topology information should not be used. This is more than suboptimal since it partially doesn't work. For the fake NUMA case topology information is still considered and scheduling domains will be created based on this. To fix this and to simplify the code get rid of the extra variable and implement the "topology=off" case like it is done for other features. Signed-off-by:
-
Heiko Carstens authored
Yet another trivial patch to reduce the noise that coccinelle generates. Signed-off-by:
-
Heiko Carstens authored
Remove a couple of unneeded semicolons. This is just to reduce the noise that the coccinelle static code checker generates. Signed-off-by:
-
Heiko Carstens authored
Merge the seven printks within topology_init_early to a single one. With an early boot console this avoids printing six lines each containing only a single character. Signed-off-by:
-
Heiko Carstens authored
Fix a long-standing but currently irrelevant bug: the memory detection code performs a tprot instruction on address zero to figure out if the first memory chunk is readable or writable. Due to low address protection the result is "read-only". If the memory detection code would actually care, it would have to ignore the first memory increment, but it adds the memory increment to writable memory anyway. If memblock debugging is enabled this leads to an extra rather surprising call which registers memory. To avoid this get rid of the first misleading tprot call and simply assume that the first memory increment is writable. Otherwise we wouldn't have reached the memory detection code anyway. Signed-off-by:
-
Heiko Carstens authored
The s390 specific memory detection code does not call memblock_add, which would generate debug output if memblock=debug is specified on the kernel command line. Instead it directly calls memblock_add_range, which doesn't generate any debug output. To have a chance to debug early memblock related bugs add an s390 specific memblock_dbg call and a (missing) memblock_dump_all call. Signed-off-by:
-
Heiko Carstens authored
reserve_initrd currently calls memblock_reserve even if the to be reserved size is zero. Even though the memblock core code can handle this correctly, it still yields confusing debug messages if memblock debugging is enabled. Therefore make sure to not call memblock_reserve with a size of zero. Signed-off-by:
-
Sebastian Ott authored
Add proper annotation to the bar definition and use casts within the bus accessors. Also change the sequence in the accessors to do the shifts in the native byte order. No functional change. Signed-off-by:
-
Heiko Carstens authored
Keep sparse and other static code checkers from emitting warnings like: arch/s390/kernel/ipl.c:1549:14: warning: incorrect type in assignment (different base types) arch/s390/kernel/ipl.c:1549:14: expected unsigned int [unsigned] csum arch/s390/kernel/ipl.c:1549:14: got restricted __wsum All usages in s390 code are ok. Therefore add proper casts. Signed-off-by:
-
Corentin Labbe authored
drivers/s390/char/zcore.c does not contain any miscdevice so the inclusion of linux/miscdevice.h is uncessary. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Sebastian Ott authored
Remove an unused member of struct channel subsystem. Signed-off-by:
-
Sebastian Ott authored
Signed-off-by:
-
Sebastian Ott authored
Simplify error handling during css initialization by moving the error handling code to setup_css (which now cleans up after itself). Also remove the odd special cleanup handling of the pseudo_subchannel. Signed-off-by:
-
Sebastian Ott authored
Cleanup the code to handle the css device attribute. Move everything to an attribute group to let the driver core handle attribute creation and removal. Signed-off-by:
-
Sebastian Ott authored
Obtain the real channel subsystem id and use that for the generation of a unique path group id. Note that this change does not affect the channel subsystem id as used in the user-visible naming of subchannels and friends. Signed-off-by:
Dong Jia Shi <bjsdjshik@linux.vnet.ibm.com> Reviewed-by:
-
Sebastian Ott authored
Currently the cssid in various structures is used as the id of the respective channel subsystem. Sometimes however we call the index in the channel_subsystems array cssid. In some places the id is even used as the index. Provide a new define MAX_CSS_IDX and use it where appropriate. In addition to that provide a dummy function to find a channel subsystem by its id and a macro to iterate over the channel subsystems. Signed-off-by:
-
Heiko Carstens authored
The variable length arrays used to specify clobbered memory within ap_nqap and ap_dqap would only work if the length would be known at compile time. This is not the case for both usages. Therefore simply use a full memory clobber and get rid of the old construct. Signed-off-by:
-
Heiko Carstens authored
Get rid of these: drivers/s390/crypto/ap_card.c:140:20: warning: symbol 'ap_card_type' was not declared. Should it be static? drivers/s390/crypto/ap_queue.c:567:20: warning: symbol 'ap_queue_type' was not declared. Should it be static? Signed-off-by:
-
Heiko Carstens authored
Use a flexible array instead. The size of the structure is not used within chsc_sstpi, therefore no change in semantics but one less sparse warning: drivers/s390/cio/chsc.c:1219:27: warning: Variable length array is used. Signed-off-by:
-
Heiko Carstens authored
Improve the memmove implementation to save one instruction and use better label names. Also use better label names for the memset and memcpy implementations so everything looks consistent. Suggested-by:
Jens Remus <jremus@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
The stcctm5 inline assembly uses a variable length array to specify the memory that is written to. According to the gcc manual this trick only works if the length is known at compile time. This is not the the case for the stccm5 inline assembly. Therefore simply use a full memory clobber. As requested by Martin also move the output Q constraint operand to the input operands list, since all we want is that the compiler generates an instruction that may use the displacement field: in other words we only need the address of *val. That the inline assembly actually writes to an array starting at val is taken care of with the memory clobber. Signed-off-by:
-
Heiko Carstens authored
Signed-off-by: -
Heiko Carstens authored
We have quite a lot of code that depends on the order of the __ctl_load inline assemby and subsequent memory accesses, like e.g. disabling lowcore protection and the writing to lowcore. Since the __ctl_load macro does not have memory barrier semantics, nor any other dependencies the compiler is, theoretically, free to shuffle code around. Or in other words: storing to lowcore could happen before lowcore protection is disabled. In order to avoid this class of potential bugs simply add a full memory barrier to the __ctl_load macro. Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace fixes from Eric Biederman: "This tree contains 4 fixes. The first is a fix for a race that can causes oopses under the right circumstances, and that someone just recently encountered. Past that are several small trivial correct fixes. A real issue that was blocking development of an out of tree driver, but does not appear to have caused any actual problems for in-tree code. A potential deadlock that was reported by lockdep. And a deadlock people have experienced and took the time to track down caused by a cleanup that removed the code to drop a reference count" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sysctl: Drop reference added by grab_header in proc_sys_readdir pid: fix lockdep deadlock warning due to ucount_lock libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount mnt: Protect the mountpoint hashtable with mount_lock
-
- 15 Jan, 2017 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 4.10-rc4 that resolve some reported issues. The MEI driver issue resolves a lot of problems that people have been having, as does the mem driver fix. The other minor fixes resolve other reported issues. All of these have been in linux-next for a while" * tag 'char-misc-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: vme: Fix wrong pointer utilization in ca91cx42_slave_get auxdisplay: fix new ht16k33 build errors ppdev: don't print a free'd string extcon: return error code on failure drivers: char: mem: Fix thinkos in kmem address checks mei: bus: enable OS version only for SPT and newer
-
Linus Torvalds authored
Merge tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single patch being reverted to remove a feature that was added in 4.10-rc1 that isn't quite ready for release. It will be redone as a debugfs file instead of a sysfs file in the future" * tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "driver core: Add deferred_probe attribute to devices in sysfs"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small tty/serial driver fixes for 4.10-rc4 to resolve a number of reported issues. Nothing major here at all, one revert of a problematic patch, and some other tiny bugfixes. Full details are in the shortlog below. All have been in linux-next with no reported issues" * tag 'tty-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: sysrq: attach sysrq handler correctly for 32-bit kernel Revert "tty: serial: 8250: add CON_CONSDEV to flags" Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break 8250_pci: Fix potential use-after-free in error path tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a few small USB driver fixes for 4.10-rc4 to resolve some reported issues. The "largest" here is a number of bugs being fixed in the ch341 usb-serial driver, to hopefully resolve the mess of different devices floating around that use this driver that have been having problems with the 4.10-rc1 release. There's also a tiny musb fix that I missed in the last pull request, as well as the traditional xhci fix rounding out the batch. All have been in linux-next with no reported issues" * tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: fix deadlock at host remove by running watchdog correctly USB: serial: ch341: fix control-message error handling usb: musb: fix runtime PM in debugfs wusbcore: Fix one more crypto-on-the-stack bug USB: serial: kl5kusb105: fix line-state error handling USB: serial: ch341: fix baud rate and line-control handling USB: serial: ch341: fix line settings after reset-resume USB: serial: ch341: fix resume after reset USB: serial: ch341: fix open error handling USB: serial: ch341: fix modem-control and B0 handling USB: serial: ch341: fix open and resume after B0 USB: serial: ch341: fix initial modem-control state
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Bugfixes for I2C. Mostly core this time which is a bit unusual but nothing really scary in there" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: piix4: Avoid race conditions with IMC i2c: fix spelling mistake: "insufficent" -> "insufficient" i2c: print correct device invalid address i2c: do not enable fall back to Host Notify by default i2c: fix kernel memory disclosure in dev interface
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: - unwinder fixes - AMD CPU topology enumeration fixes - microcode loader fixes - x86 embedded platform fixes - fix for a bootup crash that may trigger when clearcpuid= is used with invalid values" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mpx: Use compatible types in comparison to fix sparse error x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc() x86/entry: Fix the end of the stack for newly forked tasks x86/unwind: Include __schedule() in stack traces x86/unwind: Disable KASAN checks for non-current tasks x86/unwind: Silence warnings for non-current tasks x86/microcode/intel: Use correct buffer size for saving microcode data x86/microcode/intel: Fix allocation size of struct ucode_patch x86/microcode/intel: Add a helper which gives the microcode revision x86/microcode: Use native CPUID to tickle out microcode revision x86/CPU: Add native CPUID variants returning a single datum x86/boot: Add missing declaration of string functions x86/CPU/AMD: Fix Bulldozer topology x86/platform/intel-mid: Rename 'spidev' to 'mrfld_spidev' x86/cpu: Fix typo in the comment for Anniedale x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option
-
