- 15 May, 2019 8 commits
-
-
Suren Baghdasaryan authored
Split update_stats into collect_percpu_times and update_averages for collect_percpu_times to be reused later inside psi monitor. Link: http://lkml.kernel.org/r/20190319235619.260832-5-surenb@google.comSigned-off-by:
Suren Baghdasaryan <surenb@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Li Zefan <lizefan@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Suren Baghdasaryan authored
Rename psi_group structure member fields used for calculating psi totals and averages for clear distinction between them and for trigger-related fields that will be added by "psi: introduce psi monitor". [surenb@google.com: v6] Link: http://lkml.kernel.org/r/20190319235619.260832-4-surenb@google.com Link: http://lkml.kernel.org/r/20190124211518.244221-5-surenb@google.comSigned-off-by:
-
Suren Baghdasaryan authored
psi_enable is not used outside of psi.c, make it static. Link: http://lkml.kernel.org/r/20190319235619.260832-3-surenb@google.comSigned-off-by:
-
Suren Baghdasaryan authored
Patch series "psi: pressure stall monitors", v6. This is a respin of: https://lwn.net/ml/linux-kernel/20190308184311.144521-1-surenb%40google.com/ Android is adopting psi to detect and remedy memory pressure that results in stuttering and decreased responsiveness on mobile devices. Psi gives us the stall information, but because we're dealing with latencies in the millisecond range, periodically reading the pressure files to detect stalls in a timely fashion is not feasible. Psi also doesn't aggregate its averages at a high-enough frequency right now. This patch series extends the psi interface such that users can configure sensitive latency thresholds and use poll() and friends to be notified when these are breached. As high-frequency aggregation is costly, it implements an aggregation method that is optimized for fast, short-interval averaging, and makes the aggregation frequency adaptive, such that high-frequency updates only happen while monitored stall events are actively occurring. With these patches applied, Android can monitor for, and ward off, mounting memory shortages before they cause problems for the user. For example, using memory stall monitors in userspace low memory killer daemon (lmkd) we can detect mounting pressure and kill less important processes before device becomes visibly sluggish. In our memory stress testing psi memory monitors produce roughly 10x less false positives compared to vmpressure signals. Having ability to specify multiple triggers for the same psi metric allows other parts of Android framework to monitor memory state of the device and act accordingly. The new interface is straight-forward. The user opens one of the pressure files for writing and writes a trigger description into the file descriptor that defines the stall state - some or full, and the maximum stall time over a given window of time. E.g.: /* Signal when stall time exceeds 100ms of a 1s window */ char trigger[] = "full 100000 1000000" fd = open("/proc/pressure/memory") write(fd, trigger, sizeof(trigger)) while (poll() >= 0) { ... }; close(fd); When the monitored stall state is entered, psi adapts its aggregation frequency according to what the configured time window requires in order to emit event signals in a timely fashion. Once the stalling subsides, aggregation reverts back to normal. The trigger is associated with the open file descriptor. To stop monitoring, the user only needs to close the file descriptor and the trigger is discarded. Patches 1-6 prepare the psi code for polling support. Patch 7 implements the adaptive polling logic, the pressure growth detection optimized for short intervals, and hooks up write() and poll() on the pressure files. The patches were developed in collaboration with Johannes Weiner. This patch (of 7): The psi monitoring patches will need to determine the same states as record_times(). To avoid calculating them twice, maintain a state mask that can be consulted cheaply. Do this in a separate patch to keep the churn in the main feature patch at a minimum. This adds 4-byte state_mask member into psi_group_cpu struct which results in its first cacheline-aligned part becoming 52 bytes long. Add explicit values to enumeration element counters that affect psi_group_cpu struct size. Link: http://lkml.kernel.org/r/20190124211518.244221-4-surenb@google.comSigned-off-by:
-
Baruch Siach authored
Commit 0139aa7b ("mm: rename _count, field of the struct page, to _refcount") left out a couple of references to the old field name. Fix that. Link: http://lkml.kernel.org/r/cedf87b02eb8a6b3eac57e8e91da53fb15c3c44c.1556537475.git.baruch@tkos.co.il Fixes: 0139aa7b ("mm: rename _count, field of the struct page, to _refcount") Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Reviewed-by:
-
Andrea Arcangeli authored
The RCU reader uses rcu_dereference() inside rcu_read_lock critical sections, so the writer shall use WRITE_ONCE. Just a cleanup, we still rely on gcc to emit atomic writes in other places. Link: http://lkml.kernel.org/r/20190325225636.11635-3-aarcange@redhat.comSigned-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
-
Andrea Arcangeli authored
The task structure is freed while get_mem_cgroup_from_mm() holds rcu_read_lock() and dereferences mm->owner. get_mem_cgroup_from_mm() failing fork() ---- --- task = mm->owner mm->owner = NULL; free(task) if (task) *task; /* use after free */ The fix consists in freeing the task with RCU also in the fork failure case, exactly like it always happens for the regular exit(2) path. That is enough to make the rcu_read_lock hold in get_mem_cgroup_from_mm() (left side above) effective to avoid a use after free when dereferencing the task structure. An alternate possible fix would be to defer the delivery of the userfaultfd contexts to the monitor until after fork() is guaranteed to succeed. Such a change would require more changes because it would create a strict ordering dependency where the uffd methods would need to be called beyond the last potentially failing branch in order to be safe. This solution as opposed only adds the dependency to common code to set mm->owner to NULL and to free the task struct that was pointed by mm->owner with RCU, if fork ends up failing. The userfaultfd methods can still be called anywhere during the fork runtime and the monitor will keep discarding orphaned "mm" coming from failed forks in userland. This race condition couldn't trigger if CONFIG_MEMCG was set =n at build time. [aarcange@redhat.com: improve changelog, reduce #ifdefs per Michal] Link: http://lkml.kernel.org/r/20190429035752.4508-1-aarcange@redhat.com Link: http://lkml.kernel.org/r/20190325225636.11635-2-aarcange@redhat.com Fixes: 893e26e6 ("userfaultfd: non-cooperative: Add fork() event") Signed-off-by:zhong jiang <zhongjiang@huawei.com> Reported-by: syzbot+cbb52e396df3e565ab02@syzkaller.appspotmail.com Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: syzbot+cbb52e396df3e565ab02@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Andrew Morton authored
If the user downloads and applies patch-5.1.gz using patch(1), the x bit on kernel/gen_ikh_data.sh is not set. /bin/sh: 1: ./kernel/gen_ikh_data.sh: Permission denied Fix this by using CONFIG_SHELL. Signed-off-by:
-
- 14 May, 2019 32 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: "Fix-ups: - Remove unused BACKLIGHT_LCD_SUPPORT symbol - Remove unused BACKLIGHT_CLASS_DEVICE dependencies - Add DT support to lm3630a_bl Bug Fixes: - Fix error path issues in lm3630a_bl" * tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: lm3630a: Add firmware node support dt-bindings: backlight: Add lm3630a bindings backlight: lm3630a: Return 0 on success in update_status functions video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ... -
Linus Torvalds authored
Merge misc updates from Andrew Morton: - a few misc things and hotfixes - ocfs2 - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (139 commits) kernel/memremap.c: remove the unused device_private_entry_fault() export mm: delete find_get_entries_tag mm/huge_memory.c: make __thp_get_unmapped_area static mm/mprotect.c: fix compilation warning because of unused 'mm' variable mm/page-writeback: introduce tracepoint for wait_on_page_writeback() mm/vmscan: simplify trace_reclaim_flags and trace_shrink_flags mm/Kconfig: update "Memory Model" help text mm/vmscan.c: don't disable irq again when count pgrefill for memcg mm: memblock: make keeping memblock memory opt-in rather than opt-out hugetlbfs: always use address space in inode for resv_map pointer mm/z3fold.c: support page migration mm/z3fold.c: add structure for buddy handles mm/z3fold.c: improve compression by extending search mm/z3fold.c: introduce helper functions mm/page_alloc.c: remove unnecessary parameter in rmqueue_pcplist mm/hmm: add ARCH_HAS_HMM_MIRROR ARCH_HAS_HMM_DEVICE Kconfig mm/vmscan.c: simplify shrink_inactive_list() fs/sync.c: sync_file_range(2) may use WB_SYNC_ALL writeback xen/privcmd-buf.c: convert to use vm_map_pages_zero() xen/gntdev.c: convert to use vm_map_pages() ...
-
Christoph Hellwig authored
This export has been entirely unused since it was added more than 1 1/2 years ago. Link: http://lkml.kernel.org/r/20190429115535.12793-1-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
-
Matthew Wilcox (Oracle) authored
I removed the only user of this and hadn't noticed it was now unused. Link: http://lkml.kernel.org/r/20190430152929.21813-1-willy@infradead.orgSigned-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
Ross Zwisler <zwisler@google.com> Signed-off-by:
-
Bharath Vedartham authored
__thp_get_unmapped_area is only used in mm/huge_memory.c. Make it static. Tested by building and booting the kernel. Link: http://lkml.kernel.org/r/20190504102353.GA22525@bharath12345-Inspiron-5559Signed-off-by:
Bharath Vedartham <linux.bhar@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Mike Rapoport authored
Since 0cbe3e26 ("mm: update ptep_modify_prot_start/commit to take vm_area_struct as arg") the only place that uses the local 'mm' variable in change_pte_range() is the call to set_pte_at(). Many architectures define set_pte_at() as macro that does not use the 'mm' parameter, which generates the following compilation warning: CC mm/mprotect.o mm/mprotect.c: In function 'change_pte_range': mm/mprotect.c:42:20: warning: unused variable 'mm' [-Wunused-variable] struct mm_struct *mm = vma->vm_mm; ^~ Fix it by passing vma->mm to set_pte_at() and dropping the local 'mm' variable in change_pte_range(). [liu.song.a23@gmail.com: fix missed conversions] Link: http://lkml.kernel.org/r/CAPhsuW6wcQgYLHNdBdw6m0YiR4RWsS4XzfpSKU7wBLLeOCTbpw@mail.gmail.comLink: http://lkml.kernel.org/r/1557305432-4940-1-git-send-email-rppt@linux.ibm.comSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
-
Yafang Shao authored
Recently there have been some hung tasks on our server due to wait_on_page_writeback(), and we want to know the details of this PG_writeback, i.e. this page is writing back to which device. But it is not so convenient to get the details. I think it would be better to introduce a tracepoint for diagnosing the writeback details. Link: http://lkml.kernel.org/r/1556274402-19018-1-git-send-email-laoar.shao@gmail.comSigned-off-by:
Yafang Shao <laoar.shao@gmail.com> Reviewed-by:
-
Yafang Shao authored
trace_reclaim_flags and trace_shrink_flags are almost the same. We can simplify them to avoid redundant code. Link: http://lkml.kernel.org/r/1556169203-5858-1-git-send-email-laoar.shao@gmail.comSigned-off-by:
-
Mike Rapoport authored
The help describing the memory model selection is outdated. It still says that SPARSEMEM is experimental and DISCONTIGMEM is a preferred over SPARSEMEM. Update the help text for the relevant options: * add a generic help for the "Memory Model" prompt * add description for FLATMEM * reduce the description of DISCONTIGMEM and add a deprecation note * prefer SPARSEMEM over DISCONTIGMEM Link: http://lkml.kernel.org/r/1556188531-20728-1-git-send-email-rppt@linux.ibm.comSigned-off-by:
-
Yafang Shao authored
We can use __count_memcg_events() directly because this callsite is alreay protected by spin_lock_irq(). Link: http://lkml.kernel.org/r/1556093494-30798-1-git-send-email-laoar.shao@gmail.comSigned-off-by:
-
Mike Rapoport authored
Most architectures do not need the memblock memory after the page allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the arch Kconfig. Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the logic makes it clear which architectures actually use memblock after system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK to the architectures that are still missing that option. Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.comSigned-off-by:
-
Mike Kravetz authored
Continuing discussion about 58b6e5e8 ("hugetlbfs: fix memory leak for resv_map") brought up the issue that inode->i_mapping may not point to the address space embedded within the inode at inode eviction time. The hugetlbfs truncate routine handles this by explicitly using inode->i_data. However, code cleaning up the resv_map will still use the address space pointed to by inode->i_mapping. Luckily, private_data is NULL for address spaces in all such cases today but, there is no guarantee this will continue. Change all hugetlbfs code getting a resv_map pointer to explicitly get it from the address space embedded within the inode. In addition, add more comments in the code to indicate why this is being done. Link: http://lkml.kernel.org/r/20190419204435.16984-1-mike.kravetz@oracle.comSigned-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reported-by:
Yufen Yu <yuyufen@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Vitaly Wool authored
Now that we are not using page address in handles directly, we can make z3fold pages movable to decrease the memory fragmentation z3fold may create over time. This patch starts advertising non-headless z3fold pages as movable and uses the existing kernel infrastructure to implement moving of such pages per memory management subsystem's request. It thus implements 3 required callbacks for page migration: * isolation callback: z3fold_page_isolate(): try to isolate the page by removing it from all lists. Pages scheduled for some activity and mapped pages will not be isolated. Return true if isolation was successful or false otherwise * migration callback: z3fold_page_migrate(): re-check critical conditions and migrate page contents to the new page provided by the memory subsystem. Returns 0 on success or negative error code otherwise * putback callback: z3fold_page_putback(): put back the page if z3fold_page_migrate() for it failed permanently (i. e. not with -EAGAIN code). [lkp@intel.com: z3fold_page_isolate() can be static] Link: http://lkml.kernel.org/r/20190419130924.GA161478@ivb42 Link: http://lkml.kernel.org/r/20190417103922.31253da5c366c4ebe0419cfc@gmail.comSigned-off-by:
Vitaly Wool <vitaly.vul@sony.com> Signed-off-by:
kbuild test robot <lkp@intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Uladzislau Rezki <urezki@gmail.com> Signed-off-by:
-
Vitaly Wool authored
For z3fold to be able to move its pages per request of the memory subsystem, it should not use direct object addresses in handles. Instead, it will create abstract handles (3 per page) which will contain pointers to z3fold objects. Thus, it will be possible to change these pointers when z3fold page is moved. Link: http://lkml.kernel.org/r/20190417103826.484eaf18c1294d682769880f@gmail.comSigned-off-by:
-
Vitaly Wool authored
The current z3fold implementation only searches this CPU's page lists for a fitting page to put a new object into. This patch adds quick search for very well fitting pages (i. e. those having exactly the required number of free space) on other CPUs too, before allocating a new page for that object. Link: http://lkml.kernel.org/r/20190417103733.72ae81abe1552397c95a008e@gmail.comSigned-off-by:
-
Vitaly Wool authored
Patch series "z3fold: support page migration", v2. This patchset implements page migration support and slightly better buddy search. To implement page migration support, z3fold has to move away from the current scheme of handle encoding. i. e. stop encoding page address in handles. Instead, a small per-page structure is created which will contain actual addresses for z3fold objects, while pointers to fields of that structure will be used as handles. Thus, it will be possible to change the underlying addresses to reflect page migration. To support migration itself, 3 callbacks will be implemented: 1: isolation callback: z3fold_page_isolate(): try to isolate the page by removing it from all lists. Pages scheduled for some activity and mapped pages will not be isolated. Return true if isolation was successful or false otherwise 2: migration callback: z3fold_page_migrate(): re-check critical conditions and migrate page contents to the new page provided by the system. Returns 0 on success or negative error code otherwise 3: putback callback: z3fold_page_putback(): put back the page if z3fold_page_migrate() for it failed permanently (i. e. not with -EAGAIN code). To make sure an isolated page doesn't get freed, its kref is incremented in z3fold_page_isolate() and decremented during post-migration compaction, if migration was successful, or by z3fold_page_putback() in the other case. Since the new handle encoding scheme implies slight memory consumption increase, better buddy search (which decreases memory consumption) is included in this patchset. This patch (of 4): Introduce a separate helper function for object allocation, as well as 2 smaller helpers to add a buddy to the list and to get a pointer to the pool from the z3fold header. No functional changes here. Link: http://lkml.kernel.org/r/20190417103633.a4bb770b5bf0fb7e43ce1666@gmail.comSigned-off-by:
-
Yafang Shao authored
Because rmqueue_pcplist() is only called when order is 0, we don't need to use order as a parameter. Link: http://lkml.kernel.org/r/1555591709-11744-1-git-send-email-laoar.shao@gmail.comSigned-off-by:
Pankaj Gupta <pagupta@redhat.com> Signed-off-by:
-
Jérôme Glisse authored
Add 2 new Kconfig variables that are not used by anyone. I check that various make ARCH=somearch allmodconfig do work and do not complain. This new Kconfig needs to be added first so that device drivers that depend on HMM can be updated. Once drivers are updated then I can update the HMM Kconfig to depend on this new Kconfig in a followup patch. This is about solving Kconfig for HMM given that device driver are going through their own tree we want to avoid changing them from the mm tree. So plan is: 1 - Kernel release N add the new Kconfig to mm/Kconfig (this patch) 2 - Kernel release N+1 update driver to depend on new Kconfig ie stop using ARCH_HASH_HMM and start using ARCH_HAS_HMM_MIRROR and ARCH_HAS_HMM_DEVICE (one or the other or both depending on the driver) 3 - Kernel release N+2 remove ARCH_HASH_HMM and do final Kconfig update in mm/Kconfig Link: http://lkml.kernel.org/r/20190417211141.17580-1-jglisse@redhat.comSigned-off-by:Jérôme Glisse <jglisse@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
Kirill Tkhai authored
This merges together duplicated patterns of code. Also, replace count_memcg_events() with its irq-careless namesake, because they are already called in interrupts disabled context. Link: http://lkml.kernel.org/r/2ece1df4-2989-bc9b-6172-61e9fdde5bfd@virtuozzo.comSigned-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by:
-
Amir Goldstein authored
23d01270 ("fs/sync.c: make sync_file_range(2) use WB_SYNC_NONE writeback") claims that sync_file_range(2) syscall was "created for userspace to be able to issue background writeout and so waiting for in-flight IO is undesirable there" and changes the writeback (back) to WB_SYNC_NONE. This claim is only partially true. It is true for users that use the flag SYNC_FILE_RANGE_WRITE by itself, as does PostgreSQL, the user that was the reason for changing to WB_SYNC_NONE writeback. However, that claim is not true for users that use that flag combination SYNC_FILE_RANGE_{WAIT_BEFORE|WRITE|_WAIT_AFTER}. Those users explicitly requested to wait for in-flight IO as well as to writeback of dirty pages. Re-brand that flag combination as SYNC_FILE_RANGE_WRITE_AND_WAIT and use WB_SYNC_ALL writeback to perform the full range sync request. Link: http://lkml.kernel.org/r/20190409114922.30095-1-amir73il@gmail.com Link: http://lkml.kernel.org/r/20190419072938.31320-1-amir73il@gmail.com Fixes: 23d01270 ("fs/sync.c: make sync_file_range(2) use WB_SYNC_NONE") Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Acked-by:
Jan Kara <jack@suse.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Souptick Joarder authored
Convert to use vm_map_pages_zero() to map range of kernel memory to user vma. This driver has ignored vm_pgoff. We could later "fix" these drivers to behave according to the normal vm_pgoff offsetting simply by removing the _zero suffix on the function name and if that causes regressions, it gives us an easy way to revert. Link: http://lkml.kernel.org/r/acf678e81d554d01a9b590716ac0ccbdcdf71c25.1552921225.git.jrdr.linux@gmail.comSigned-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Airlie <airlied@linux.ie> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Sandy Huang <hjc@rock-chips.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thierry Reding <treding@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Souptick Joarder authored
Convert to use vm_map_pages() to map range of kernel memory to user vma. map->count is passed to vm_map_pages() and internal API verify map->count against count ( count = vma_pages(vma)) for page array boundary overrun condition. Link: http://lkml.kernel.org/r/88e56e82d2db98705c2d842e9c9806c00b366d67.1552921225.git.jrdr.linux@gmail.comSigned-off-by:
-
Souptick Joarder authored
Convert to use vm_map_pages() to map range of kernel memory to user vma. vm_pgoff is treated in V4L2 API as a 'cookie' to select a buffer, not as a in-buffer offset by design and it always want to mmap a whole buffer from its beginning. Link: http://lkml.kernel.org/r/a953fe6b3056de1cc6eab654effdd4a22f125375.1552921225.git.jrdr.linux@gmail.comSigned-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
-
Souptick Joarder authored
Convert to use vm_map_pages() to map range of kernel memory to user vma. Link: http://lkml.kernel.org/r/80c3d220fc6ada73a88ce43ca049afb55a889258.1552921225.git.jrdr.linux@gmail.comSigned-off-by:
-
Souptick Joarder authored
Convert to use vm_map_pages() to map range of kernel memory to user vma. Link: http://lkml.kernel.org/r/ff8e10ba778d79419c66ee8215bccf01560540fd.1552921225.git.jrdr.linux@gmail.comSigned-off-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Airlie <airlied@linux.ie> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Sandy Huang <hjc@rock-chips.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thierry Reding <treding@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Souptick Joarder authored
Convert to use vm_map_pages() to map range of kernel memory to user vma. Tested on Rockchip hardware and display is working, including talking to Lima via prime. Link: http://lkml.kernel.org/r/7ba359eb1aceac388d05983c1f29b915bdf291f9.1552921225.git.jrdr.linux@gmail.comSigned-off-by:
Heiko Stuebner <heiko@sntech.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Airlie <airlied@linux.ie> Cc: Joerg Roedel <joro@8bytes.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Sandy Huang <hjc@rock-chips.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thierry Reding <treding@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Souptick Joarder authored
Convert to use vm_map_pages_zero() to map range of kernel memory to user vma. This driver has ignored vm_pgoff and mapped the entire pages. We could later "fix" these drivers to behave according to the normal vm_pgoff offsetting simply by removing the _zero suffix on the function name and if that causes regressions, it gives us an easy way to revert. Link: http://lkml.kernel.org/r/88645f5ea8202784a8baaf389e592aeb8c505e8e.1552921225.git.jrdr.linux@gmail.comSigned-off-by:
-
Souptick Joarder authored
Convert to use vm_map_pages() to map range of kernel memory to user vma. Link: http://lkml.kernel.org/r/936e5e107c746a7310e3a3c471188ca3ac8f9754.1552921225.git.jrdr.linux@gmail.comSigned-off-by:
-
Souptick Joarder authored
Patch series "mm: Use vm_map_pages() and vm_map_pages_zero() API", v5. This patch (of 5): Previouly drivers have their own way of mapping range of kernel pages/memory into user vma and this was done by invoking vm_insert_page() within a loop. As this pattern is common across different drivers, it can be generalized by creating new functions and using them across the drivers. vm_map_pages() is the API which can be used to map kernel memory/pages in drivers which have considered vm_pgoff vm_map_pages_zero() is the API which can be used to map a range of kernel memory/pages in drivers which have not considered vm_pgoff. vm_pgoff is passed as default 0 for those drivers. We _could_ then at a later "fix" these drivers which are using vm_map_pages_zero() to behave according to the normal vm_pgoff offsetting simply by removing the _zero suffix on the function name and if that causes regressions, it gives us an easy way to revert. Tested on Rockchip hardware and display is working, including talking to Lima via prime. Link: http://lkml.kernel.org/r/751cb8a0f4c3e67e95c58a3b072937617f338eea.1552921225.git.jrdr.linux@gmail.comSigned-off-by:
Russell King <linux@armlinux.org.uk> Suggested-by:
-
Bartlomiej Zolnierkiewicz authored
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c564 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Link: http://lkml.kernel.org/r/c3385916-e4d4-37d3-b330-e6b7dff83a52@samsung.comSigned-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
-
