pgoff should be aligned using ALIGN_DOWN() instead of ALIGN().  Otherwise,
vmf->address not aligned to fault_size will be aligned to the next
alignment, that can result in memory failure getting the wrong address.

It's a subtle situation that only can be observed in
page_mapped_in_vma() after the page is page fault handled by
dev_dax_huge_fault.  Generally, there is little chance to perform
page_mapped_in_vma in dev-dax's page unless in specific error injection
to the dax device to trigger an MCE - memory-failure.  In that case,
page_mapped_in_vma() will be triggered to determine which task is
accessing the failure address and kill that task in the end.


We used self-developed dax device (which is 2M aligned mapping) , to
perform error injection to random address.  It turned out that error
injected to non-2M-aligned address was causing endless MCE until panic.
Because page_mapped_in_vma() kept resulting wrong address and the task
accessing the failure address was never killed properly:


[ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered
[ 3784.049006] mce: Uncorrected hardware memory error in user-access at 
200c9742380
[ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered
[ 3784.448042] mce: Uncorrected hardware memory error in user-access at 
200c9742380
[ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered
[ 3784.792026] mce: Uncorrected hardware memory error in user-access at 
200c9742380
[ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered
[ 3785.162502] mce: Uncorrected hardware memory error in user-access at 
200c9742380
[ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered
[ 3785.461116] mce: Uncorrected hardware memory error in user-access at 
200c9742380
[ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered
[ 3785.764730] mce: Uncorrected hardware memory error in user-access at 
200c9742380
[ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered
[ 3786.042128] mce: Uncorrected hardware memory error in user-access at 
200c9742380
[ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered
[ 3786.464293] mce: Uncorrected hardware memory error in user-access at 
200c9742380
[ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered
[ 3786.818090] mce: Uncorrected hardware memory error in user-access at 
200c9742380
[ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered
[ 3787.085297] mce: Uncorrected hardware memory error in user-access at 
200c9742380
[ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page: 
Recovered

It took us several weeks to pinpoint this problem,  but we eventually
used bpftrace to trace the page fault and mce address and successfully
identified the issue.


Joao added:

; Likely we never reproduce in production because we always pin
: device-dax regions in the region align they provide (Qemu does
: similarly with prealloc in hugetlb/file backed memory).  I think this
: bug requires that we touch *unpinned* device-dax regions unaligned to
: the device-dax selected alignment (page size i.e.  4K/2M/1G)

Link: https://lkml.kernel.org/r/23c02a03e8d666fef11bbe13e85c69c8b4ca0624.1727421694.git.llfl@linux.alibaba.com
Fixes: b9b5777f ("device-dax: use ALIGN() for determining pgoff")
Signed-off-by: Kun(llfl) <llfl@linux.alibaba.com>
Tested-by: JianXiong Zhao <zhaojianxiong.zjx@alibaba-inc.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.

However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.

As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:

	WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525
	 <TASK>
	 kthread_stop+0x17a/0x630 kernel/kthread.c:707
	 destroy_workqueue+0x136/0xc40 kernel/workqueue.c:5810
	 wg_destruct+0x1e2/0x2e0 drivers/net/wireguard/device.c:257
	 netdev_run_todo+0xe1a/0x1000 net/core/dev.c:10693
	 default_device_exit_batch+0xa14/0xa90 net/core/dev.c:11769
	 ops_exit_list net/core/net_namespace.c:178 [inline]
	 cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:640
	 process_one_work kernel/workqueue.c:3231 [inline]
	 process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
	 worker_thread+0x86d/0xd70 kernel/workqueue.c:3393
	 kthread+0x2f0/0x390 kernel/kthread.c:389
	 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
	 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
	 </TASK>

Fix this with skipping unecessary unparking while stopping a kthread.

Link: https://lkml.kernel.org/r/20240913214634.12557-1-frederic@kernel.org
Fixes: 5c25b5ff ("workqueue: Tag bound workers with KTHREAD_IS_PER_CPU")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: syzbot+943d34fa3cf2191e3068@syzkaller.appspotmail.com
Tested-by: syzbot+943d34fa3cf2191e3068@syzkaller.appspotmail.com
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This reverts commit eab0af90.

There is no existing user of those flags.  PF_MEMALLOC_NOWARN is dangerous
because a nested allocation context can use GFP_NOFAIL which could cause
unexpected failure.  Such a code would be hard to maintain because it
could be deeper in the call chain.

PF_MEMALLOC_NORECLAIM has been added even when it was pointed out [1] that
such a allocation contex is inherently unsafe if the context doesn't fully
control all allocations called from this context.

While PF_MEMALLOC_NOWARN is not dangerous the way PF_MEMALLOC_NORECLAIM is
it doesn't have any user and as Matthew has pointed out we are running out
of those flags so better reclaim it without any real users.

[1] https://lore.kernel.org/all/ZcM0xtlKbAOFjv5n@tiehlicka/

Link: https://lkml.kernel.org/r/20240926172940.167084-3-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "remove PF_MEMALLOC_NORECLAIM" v3.


This patch (of 2):

bch2_new_inode relies on PF_MEMALLOC_NORECLAIM to try to allocate a new
inode to achieve GFP_NOWAIT semantic while holding locks. If this
allocation fails it will drop locks and use GFP_NOFS allocation context.

We would like to drop PF_MEMALLOC_NORECLAIM because it is really
dangerous to use if the caller doesn't control the full call chain with
this flag set. E.g. if any of the function down the chain needed
GFP_NOFAIL request the PF_MEMALLOC_NORECLAIM would override this and
cause unexpected failure.

While this is not the case in this particular case using the scoped gfp
semantic is not really needed bacause we can easily pus the allocation
context down the chain without too much clutter.

[akpm@linux-foundation.org: fix kerneldoc warnings]
Link: https://lkml.kernel.org/r/20240926172940.167084-1-mhocko@kernel.org
Link: https://lkml.kernel.org/r/20240926172940.167084-2-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz> # For vfs changes
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Move non-boot built-in DTBs to the .rodata section

 - Fix Kconfig bugs

 - Fix maint scripts in the linux-image Debian package

 - Import some list macros to scripts/include/

* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: deb-pkg: Remove blank first line from maint scripts
  kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
  scripts: import more list macros
  kconfig: qconf: fix buffer overflow in debug links
  kconfig: qconf: move conf_read() before drawing tree pain
  kconfig: clear expr::val_is_valid when allocated
  kconfig: fix infinite loop in sym_calc_choice()
  kbuild: move non-boot built-in DTBs to .rodata section

Merge tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
   laptops

 - Intel Diamond Rapids hw-id additions

 - Documentation and MAINTAINERS fixes

 - Some other small fixes

* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
  platform/x86: wmi: Update WMI driver API documentation
  platform/x86: dell-ddv: Fix typo in documentation
  platform/x86: dell-sysman: add support for alienware products
  platform/x86/intel: power-domains: Add Diamond Rapids support
  platform/x86: ISST: Add Diamond Rapids to support list
  platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
  platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
  MAINTAINERS: Update Intel In Field Scan(IFS) entry
  platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug

Pull kvm fixes from Paolo Bonzini:
 "ARM64:

   - Fix pKVM error path on init, making sure we do not change critical
     system registers as we're about to fail

   - Make sure that the host's vector length is at capped by a value
     common to all CPUs

   - Fix kvm_has_feat*() handling of "negative" features, as the current
     code is pretty broken

   - Promote Joey to the status of official reviewer, while James steps
     down -- hopefully only temporarly

  x86:

   - Fix compilation with KVM_INTEL=KVM_AMD=n

   - Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use

  Selftests:

   - Fix compilation on non-x86 architectures"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86/reboot: emergency callbacks are now registered by common KVM code
  KVM: x86: leave kvm.ko out of the build if no vendor module is requested
  KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
  KVM: arm64: Fix kvm_has_feat*() handling of negative features
  KVM: selftests: Fix build on architectures other than x86_64
  KVM: arm64: Another reviewer reshuffle
  KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
  KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path

Pull powerpc fix from Michael Ellerman:

 - Allow r30 to be used in vDSO code generation of getrandom

Thanks to Jason A. Donenfeld

* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vdso: allow r30 in vDSO code generation of getrandom

The blank line causes execve() to fail:

  # strace ./postinst
  execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
  strace: exec: Exec format error
  +++ exited with 1 +++

However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.

Fixes: b611daae ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If we follow "make help" to "make dt_binding_schema", we will see
below error:

$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'.  Stop.
make: *** [Makefile:224: __sub-make] Error 2

It should be a typo. So this will fix it.

Fixes: 604a57ba ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Import list_is_first, list_is_last, list_replace, and list_replace_init.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().

When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.

Fixes: 5eba0141 ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs")
Fixes: e2200d3f ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()")
Cc: stable@vger.kernel.org
Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com

The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.

Fixes: e04e2b76 ("platform/x86: wmi: Pass event data directly to legacy notify handlers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.deSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix typo in word 'diagnostics' in documentation.
Signed-off-by: Anaswara T Rajan <anaswaratrajan@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005070056.16326-1-anaswaratrajan@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Alienware supports firmware-attributes and has its own OEM string.
Signed-off-by: Crag Wang <crag_wang@dell.com>
Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add Diamond Rapids (INTEL_PANTHERCOVE_X) to tpmi_cpu_ids to support
domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20241003215554.3013807-3-srinivas.pandruvada@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add Diamond Rapids (INTEL_PANTHERCOVE_X) to SST support list by adding
to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20241003215554.3013807-2-srinivas.pandruvada@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.

Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.

Fixes: e86c8186 ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346
Cc: Marek Maslanka <mmaslanka@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com

If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.

On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.

Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.deReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Ashok is no longer with Intel and his e-mail address will start bouncing
soon.  Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241001170808.203970-1-jithu.joseph@intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
  system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
  common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
  code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
  down -- hopefully only temporarly

Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a942 ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled.  In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.

Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.

This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled.  The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.

Fixes: 590b09b1 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull bcachefs fixes from Kent Overstreet:
 "A lot of little fixes, bigger ones include:

   - bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
     changes, now fixed along with another lost wakeup

   - fragmentation LRU fixes; fsck now repairs successfully (this is the
     data structure copygc uses); along with some nice simplification.

   - Rework logged op error handling, so that if logged op replay errors
     (due to another filesystem error) we delete the logged op instead
     of going into an infinite loop)

   - Various small filesystem connectivitity repair fixes"

* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
  bcachefs: Rework logged op error handling
  bcachefs: Add warn param to subvol_get_snapshot, peek_inode
  bcachefs: Kill snapshot arg to fsck_write_inode()
  bcachefs: Check for unlinked, non-empty dirs in check_inode()
  bcachefs: Check for unlinked inodes with dirents
  bcachefs: Check for directories with no backpointers
  bcachefs: Kill alloc_v4.fragmentation_lru
  bcachefs: minor lru fsck fixes
  bcachefs: Mark more errors AUTOFIX
  bcachefs: Make sure we print error that causes fsck to bail out
  bcachefs: bkey errors are only AUTOFIX during read
  bcachefs: Create lost+found in correct snapshot
  bcachefs: Fix reattach_inode()
  bcachefs: Add missing wakeup to bch2_inode_hash_remove()
  bcachefs: Fix trans_commit disk accounting revert
  bcachefs: Fix bch2_inode_is_open() check
  bcachefs: Fix return type of dirent_points_to_inode_nowarn()
  bcachefs: Fix bad shift in bch2_read_flag_list()

Pull xen fix from Juergen Gross:
 "Fix Xen config issue introduced in the merge window"

* tag 'for-linus-6.12a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Fix config option reference in XEN_PRIVCMD definition

Pull ext4 fixes from Ted Ts'o:
 "Fix some ext4 bugs and regressions relating to oneline resize and fast
  commits"

* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix off by one issue in alloc_flex_gd()
  ext4: mark fc as ineligible using an handle in ext4_xattr_set()
  ext4: use handle to mark fc as ineligible in __track_dentry_update()

Pull cxl fix from Ira Weiny:

 - Fix calculation for SBDF in error injection

* tag 'cxl-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  EINJ, CXL: Fix CXL device SBDF calculation

Pull i2c fix from Wolfram Sang:

 - Fix potential deadlock during runtime suspend and resume (stm32f7)

* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume

Pull spi fixes from Mark Brown:
 "A small set of driver specific fixes that came in since the merge
  window, about half of which is fixes for correctness in the use of the
  runtime PM APIs done as part of a broader cleanup"

* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: s3c64xx: fix timeout counters in flush_fifo
  spi: atmel-quadspi: Fix wrong register value written to MR
  spi: spi-cadence: Fix missing spi_controller_is_target() check
  spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
  spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled

Pull hardening fixes from Kees Cook:

 - gcc plugins: Avoid Kconfig warnings with randstruct (Nathan
   Chancellor)

 - MAINTAINERS: Add security/Kconfig.hardening to hardening section
   (Nathan Chancellor)

 - MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list

* tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  MAINTAINERS: Add security/Kconfig.hardening to hardening section
  hardening: Adjust dependencies in selection of MODVERSIONS
  MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list

Pull lsm revert from Paul Moore:
 "Here is the CONFIG_SECURITY_TOMOYO_LKM revert that we've been
  discussing this week. With near unanimous agreement that the original
  TOMOYO patches were not the right way to solve the distro problem
  Tetsuo is trying the solve, reverting is our best option at this time"

* tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support

Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[   19.411889] ==================================================================
[   19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[   19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[   19.417368]
[   19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G            E      6.9.0 #10
[   19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[   19.422687] Call Trace:
[   19.424091]  <TASK>
[   19.425448]  dump_stack_lvl+0x5d/0x80
[   19.426963]  ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[   19.428694]  print_report+0x19d/0x52e
[   19.430206]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[   19.431837]  ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[   19.433539]  kasan_report+0xf0/0x170
[   19.435019]  ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[   19.436709]  _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[   19.438379]  ? __pfx_sched_clock_cpu+0x10/0x10
[   19.439910]  isst_if_cpu_online+0x406/0x58f [isst_if_common]
[   19.441573]  ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[   19.443263]  ? ttwu_queue_wakelist+0x2c1/0x360
[   19.444797]  cpuhp_invoke_callback+0x221/0xec0
[   19.446337]  cpuhp_thread_fun+0x21b/0x610
[   19.447814]  ? __pfx_cpuhp_thread_fun+0x10/0x10
[   19.449354]  smpboot_thread_fn+0x2e7/0x6e0
[   19.450859]  ? __pfx_smpboot_thread_fn+0x10/0x10
[   19.452405]  kthread+0x29c/0x350
[   19.453817]  ? __pfx_kthread+0x10/0x10
[   19.455253]  ret_from_fork+0x31/0x70
[   19.456685]  ? __pfx_kthread+0x10/0x10
[   19.458114]  ret_from_fork_asm+0x1a/0x30
[   19.459573]  </TASK>
[   19.460853]
[   19.462055] Allocated by task 1198:
[   19.463410]  kasan_save_stack+0x30/0x50
[   19.464788]  kasan_save_track+0x14/0x30
[   19.466139]  __kasan_kmalloc+0xaa/0xb0
[   19.467465]  __kmalloc+0x1cd/0x470
[   19.468748]  isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[   19.470233]  isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[   19.471670]  do_one_initcall+0xa4/0x380
[   19.472903]  do_init_module+0x238/0x760
[   19.474105]  load_module+0x5239/0x6f00
[   19.475285]  init_module_from_file+0xd1/0x130
[   19.476506]  idempotent_init_module+0x23b/0x650
[   19.477725]  __x64_sys_finit_module+0xbe/0x130
[   19.476506]  idempotent_init_module+0x23b/0x650
[   19.477725]  __x64_sys_finit_module+0xbe/0x130
[   19.478920]  do_syscall_64+0x82/0x160
[   19.480036]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[   19.481292]
[   19.482205] The buggy address belongs to the object at ffff888829e65000
 which belongs to the cache kmalloc-512 of size 512
[   19.484818] The buggy address is located 0 bytes to the right of
 allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[   19.487447]
[   19.488328] The buggy address belongs to the physical page:
[   19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[   19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[   19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[   19.493914] page_type: 0xffffffff()
[   19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[   19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[   19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[   19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[   19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff
[   19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[   19.503784] page dumped because: kasan: bad access detected
[   19.505058]
[   19.505970] Memory state around the buggy address:
[   19.507172]  ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   19.508599]  ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   19.510014]                    ^
[   19.510016]  ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   19.510018]  ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   19.515367] ==================================================================

The reason for this error is physical_package_ids assigned by VMware VMM
are not continuous and have gaps. This will cause value returned by
topology_physical_package_id() to be more than topology_max_packages().

Here the allocation uses topology_max_packages(). The call to
topology_max_packages() returns maximum logical package ID not physical
ID. Hence use topology_logical_package_id() instead of
topology_physical_package_id().

Fixes: 9a1aac8a ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering")
Cc: stable@vger.kernel.org
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zach Wade <zachwade.k@gmail.com>
Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Merge tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Fixes to build warnings, install scripts, run-time error path, and git
  status cleanups to tests:

   - devices/probe: fix for Python3 regex string syntax warnings

   - clone3: removing unused macro from clone3_cap_checkpoint_restore()

   - vDSO: fix to align getrandom states to cache line

   - core and exec: add missing executables to .gitignore files

   - rtc: change to skip test if /dev/rtc0 can't be accessed

   - timers/posix: fix warn_unused_result result in __fatal_error()

   - breakpoints: fix to detect suspend successful condition correctly

   - hid: fix to install required dependencies to run the test"

* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: breakpoints: use remaining time to check if suspend succeed
  kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
  selftest: hid: add missing run-hid-tools-tests.sh
  selftests: vDSO: align getrandom states to cache line
  selftests: exec: update gitignore for load_address
  selftests: core: add unshare_test to gitignore
  clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
  selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
  selftest: rtc: Check if could access /dev/rtc0 before testing

Initially it was thought that we just wanted to ignore errors from
logged op replay, but it turns out we do need to catch -EROFS, or we'll
go into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

These shouldn't always be fatal errors - logged op resume, in
particular, and we want it as a parameter there.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It was initially believed that it would be better to be explicit about
the snapshot we're updating when writing inodes in fsck; however, it
turns out that passing around the snapshot separately is more error
prone and we're usually updating the inode in the same snapshow we read
it from.

This is different from normal filesystem paths, where we do the update
in the snapshot of the subvolume we're in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We want to check for this early so it can be reattached if necessary in
check_unreachable_inodes(); better than letting it be deleted and having
the children reattached, losing their filenames.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

link count works differently in bcachefs - it's only nonzero for files
with multiple hardlinks, which means we can also avoid checking it
except for files that are known to have hardlinks.

That means we need a few different checks instead; in particular, we
don't want fsck to delet a file that has a dirent pointing to it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It's legal for regular files to have missing backpointers (due to
hardlinks), and fsck should automatically add them, but for directories
this is an error that should be flagged.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>