- 06 Apr, 2018 27 commits
-
-
Yiwen Jiang authored
When the user uses some syscall, for example mmap(v9fs_file_mmap), it will not update atime even if user's was set mnt_flags without MNT_NOATIME, because v9fs defaults to settine SB_NOATIME in v9fs_set_super. For supporting access time updating when the user mounts with relatime, we should not set SB_NOATIME by default. Link: http://lkml.kernel.org/r/5AB9A377.6080906@huawei.comSigned-off-by:
Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by:
Greg Kurz <groug@kaod.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chengguang Xu authored
Check memory allocation result for cachetag in mount option parsing and fix potential memory leak in the error case. Link: http://lkml.kernel.org/r/1521614889-73446-1-git-send-email-cgxu519@gmx.comSigned-off-by:
Chengguang Xu <cgxu519@gmx.com> Reviewed-by:
-
Eryu Guan authored
If the exported filesystem dir on 9p server doesn't maintain accurate i_nlink count, e.g. always reports i_nlink as 1, then 9p should not maintain nlink count either, otherwise drop_link would report warning with i_nlink being zero. For example: - overlayfs sets nlink to 1 for merged dir - ext4 (with dir_nlink feature enabled) sets nlink to 1 if a dir has more than EXT4_LINK_MAX (65000) links. In this case, everytime a stat(2) call (getattr) on such exported dirs on 9p client side, the i_nlink gets reset to 1, then operations like rmdir(2), unlink(2) and rename(2) would cause the dir nlink to go to zero (then negative), which results in warnings in drop_nlink() and/or inc_nlink() calls. This can be reproduced easily as the following steps: - export a merged overlayfs dir via qemu virtfs to guest - mount the exported virtfs in guest - create two sub-directories in the root dir of the mounted 9pfs - stat the root dir of 9pfs, this resets nlink to 1 - remove all subdirs, the second unlink/rmdir would trigger warning ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1284 at fs/inode.c:282 drop_nlink+0x3e/0x50 ... Call Trace: dump_stack+0x63/0x81 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 drop_nlink+0x3e/0x50 v9fs_remove+0xaa/0x130 [9p] v9fs_vfs_rmdir+0x13/0x20 [9p] vfs_rmdir+0xb7/0x130 do_rmdir+0x1b8/0x230 SyS_unlinkat+0x22/0x30 do_syscall_64+0x67/0x180 ---[ end trace 43758d8ba91e603b ]--- Fix it by leaving i_nlink to be 1 and don't drop nlink if a directory has nlink <= 2, which indicates that the underlying exported fs doesn't maintain nlink count accurately. This follows what ext4 does in ext4_dec_count(). Link: http://lkml.kernel.org/r/20180312053829.4367-1-eguan@linux.alibaba.comSigned-off-by:Eryu Guan <eguan@linux.alibaba.com> Reviewed-by:
Roman Kapl <code@rkapl.cz> Cc: Caspar Zhang <caspar@linux.alibaba.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: <v9fs-developer@lists.sourceforge.net> Signed-off-by:
-
Greg Kurz authored
If it was interrupted by a signal, the 9p client may need to send some more requests to the server for cleanup before returning to userspace. To avoid such a last minute request to be interrupted right away, the client memorizes if a signal is pending, clears TIF_SIGPENDING, handles the request and calls recalc_sigpending() before returning. Unfortunately, if the transmission of this cleanup request fails for any reason, the transport returns an error and the client propagates it right away, without calling recalc_sigpending(). This ends up with -ERESTARTSYS from the initially interrupted request crawling up to syscall exit, with TIF_SIGPENDING cleared by the cleanup request. The specific signal handling code, which is responsible for converting -ERESTARTSYS to -EINTR is not called, and userspace receives the confusing errno value: open: Unknown error 512 (512) This is really hard to hit in real life. I discovered the issue while working on hot-unplug of a virtio-9p-pci device with an instrumented QEMU allowing to control request completion. Both p9_client_zc_rpc() and p9_client_rpc() functions have this buggy error path actually. Their code flow is a bit obscure and the best thing to do would probably be a full rewrite: to really ensure this situation of clearing TIF_SIGPENDING and returning -ERESTARTSYS can never happen. But given the general lack of interest for the 9p code, I won't risk breaking more things. So this patch simply fixes the buggy paths in both functions with a trivial label+goto. Thanks to Laurent Dufour for his help and suggestions on how to find the root cause and how to fix it. Link: http://lkml.kernel.org/r/152062809886.10599.7361006774123053312.stgit@bahia.lanSigned-off-by:
-
Changwei Ge authored
Link: http://lkml.kernel.org/r/1522734135-7933-1-git-send-email-ge.changwei@h3c.comSigned-off-by:
Changwei Ge <ge.changwei@h3c.com> Acked-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by:
-
piaojun authored
We need to check len for bio_add_page() to make sure the bio has been set up correctly, otherwise we may submit incorrect data to device. Link: http://lkml.kernel.org/r/5ABC3EBE.5020807@huawei.comSigned-off-by:
Jun Piao <piaojun@huawei.com> Reviewed-by:
-
Gang He authored
Add duplicated ino number check, to avoid adding a file into the file check list when this file is being checked. Link: http://lkml.kernel.org/r/1495611866-27360-5-git-send-email-ghe@suse.comSigned-off-by:
Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by:
-
Gang He authored
Use embedded kobject mechanism for online file check feature, this will avoid to use a global list to save/search per-device online file check related data, meanwhile, reduce the code lines and make the code logic clear. The changed code is based on Goldwyn Rodrigues's patches and ext4 fs code. Link: http://lkml.kernel.org/r/1495611866-27360-4-git-send-email-ghe@suse.comSigned-off-by:
-
Gang He authored
First, move setting fe_done = 1 in spin lock, avoid bring any potential race condition. Second, tune mlog message level from ERROR to NOTICE, since the message should not belong to error message. Third, tune errno to -EAGAIN when file check queue is full, this errno is more appropriate in the case. Link: http://lkml.kernel.org/r/1495611866-27360-3-git-send-email-ghe@suse.comSigned-off-by:
-
Gang He authored
Patch series "ocfs2: use kobject for online file check", v3. Use embedded kobject mechanism for online file check feature, this will avoid to use a global list to save/search per-device online file check related data. The changed code is based on Goldwyn Rodrigues's patches and ext4 fs code, there is not any new features added, except some very small fixes during this code refactoring. Second, the code change does not affect the underlying file check code. Thank Goldwyn very much. Compare with second version, add more comments in the patch descriptions, to make sure each modification is mentioned. Compare with first version, split the code change into four patches, make sure each patch will not bring ocfs2 kernel modules compiling errors. This patch (of 3): Move some definitions to header file, which will be referenced by other source files when kobject mechanism is introduced. Link: http://lkml.kernel.org/r/1495611866-27360-2-git-send-email-ghe@suse.comSigned-off-by:
-
Changwei Ge authored
Inspired by the ocfs2 patch to fix the spelling of migrateable to migratable, I checked all ocfs2 files and found more spelling mistakes. So correct them all. Link: http://lkml.kernel.org/r/1521525734-19576-1-git-send-email-ge.changwei@h3c.comSigned-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in mlog message text Link: http://lkml.kernel.org/r/20180319114101.2051-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by:
-
piaojun authored
Wait for dlm recovery done when migrating all lock resources in case that new lock resource left after leaving dlm domain. And the left lock resource will cause other nodes BUG. NodeA NodeB NodeC umount: dlm_unregister_domain() dlm_migrate_all_locks() NodeB down do recovery for NodeB and collect a new lockres form other live nodes: dlm_do_recovery dlm_remaster_locks dlm_request_all_locks: dlm_mig_lockres_handler dlm_new_lockres __dlm_insert_lockres at last NodeA become the master of the new lockres and leave domain: dlm_leave_domain() mount: dlm_join_domain() touch file and request for the owner of the new lockres, but all the other nodes said 'NO', so NodeC decide to be the owner, and send do assert msg to other nodes: dlmlock() dlm_get_lock_resource() dlm_do_assert_master() other nodes receive the msg and found two masters exist. at last cause BUG in dlm_assert_master_handler() -->BUG(); Link: http://lkml.kernel.org/r/5AAA6E25.7090303@huawei.com Fixes: bc9838c4 ("dlm: allow dlm do recovery during shutdown") Signed-off-by:Alex Chen <alex.chen@huawei.com> Reviewed-by:
-
Changwei Ge authored
Link: http://lkml.kernel.org/r/1521116681-14602-2-git-send-email-ge.changwei@h3c.comSigned-off-by:
-
Changwei Ge authored
Link: http://lkml.kernel.org/r/1521116681-14602-1-git-send-email-ge.changwei@h3c.comSigned-off-by:
-
Changwei Ge authored
Obviously, the comment before dlm_do_local_recovery_cleanup() has nothing to do with it. So remove it. Link: http://lkml.kernel.org/r/1519371054-4648-1-git-send-email-ge.changwei@h3c.comSigned-off-by:
-
Changwei Ge authored
The two functions are no longer used. Link: http://lkml.kernel.org/r/1519609595-26229-1-git-send-email-ge.changwei@h3c.comSigned-off-by:
-
piaojun authored
As kmem_cache_destroy() already handles null pointers, so we can remove the conditional test entirely. Link: http://lkml.kernel.org/r/5A9EB21D.3000209@huawei.comSigned-off-by:
-
Jun Piao authored
We should not handle migrate lockres if we are already in 'DLM_CTXT_IN_SHUTDOWN', as that will cause lockres remains after leaving dlm domain. At last other nodes will get stuck into infinite loop when requsting lock from us. The problem is caused by concurrency umount between nodes. Before receiveing N1's DLM_BEGIN_EXIT_DOMAIN_MSG, N2 has picked up N1 as the migrate target. So N2 will continue sending lockres to N1 even though N1 has left domain. N1 N2 (owner) touch file access the file, and get pr lock begin leave domain and pick up N1 as new owner begin leave domain and migrate all lockres done begin migrate lockres to N1 end leave domain, but the lockres left unexpectedly, because migrate task has passed [piaojun@huawei.com: v3] Link: http://lkml.kernel.org/r/5A9CBD19.5020107@huawei.com Link: http://lkml.kernel.org/r/5A99F028.2090902@huawei.comSigned-off-by: -
Jia Guo authored
Keep the trace point consistent with the function name. Link: http://lkml.kernel.org/r/02609aba-84b2-a22d-3f3b-bc1944b94260@huawei.com Fixes: 3ef045c3 ("ocfs2: switch to ->write_iter()") Signed-off-by:
Jia Guo <guojia12@huawei.com> Reviewed-by:
-
piaojun authored
Remove some unused function declarations in dlmcommon.h. Link: http://lkml.kernel.org/r/5A7D1034.7050807@huawei.comSigned-off-by:
-
piaojun authored
We could use 'oi' instead of 'OCFS2_I()' to make code more elegant. Link: http://lkml.kernel.org/r/5A7020FE.5050906@huawei.comSigned-off-by:
-
piaojun authored
We could use 'osb' instead of 'OCFS2_SB()' to make code more elegant. Link: http://lkml.kernel.org/r/5A702111.7090907@huawei.comSigned-off-by:
-
Changbin Du authored
Inspired by gdb command 'list', show the code context of target lines. Here is a example: $ scripts/faddr2line vmlinux native_write_msr+0x6 native_write_msr+0x6/0x20: arch_static_branch at arch/x86/include/asm/msr.h:105 100 return EAX_EDX_VAL(val, low, high); 101 } 102 103 static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high) 104 { 105 asm volatile("1: wrmsr\n" 106 "2:\n" 107 _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe) 108 : : "c" (msr), "a"(low), "d" (high) : "memory"); 109 } 110 (inlined by) static_key_false at include/linux/jump_label.h:142 137 #define JUMP_TYPE_LINKED 2UL 138 #define JUMP_TYPE_MASK 3UL 139 140 static __always_inline bool static_key_false(struct static_key *key) 141 { 142 return arch_static_branch(key, false); 143 } 144 145 static __always_inline bool static_key_true(struct static_key *key) 146 { 147 return !arch_static_branch(key, true); (inlined by) native_write_msr at arch/x86/include/asm/msr.h:150 145 static inline void notrace 146 native_write_msr(unsigned int msr, u32 low, u32 high) 147 { 148 __wrmsr(msr, low, high); 149 150 if (msr_tracepoint_active(__tracepoint_write_msr)) 151 do_trace_write_msr(msr, ((u64)high << 32 | low), 0); 152 } 153 154 /* Can be uninlined because referenced by paravirt */ 155 static inline int notrace Link: http://lkml.kernel.org/r/1521444205-2259-1-git-send-email-changbin.du@intel.comSigned-off-by:Changbin Du <changbin.du@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: NeilBrown <neilb@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by:
-
Yury Norov authored
syzbot is catching stalls at __bitmap_parselist() (https://syzkaller.appspot.com/bug?id=ad7e0351fbc90535558514a71cd3edc11681997a). The trigger is unsigned long v = 0; bitmap_parselist("7:,", &v, BITS_PER_LONG); which results in hitting infinite loop at while (a <= b) { off = min(b - a + 1, used_size); bitmap_set(maskp, a, off); a += group_size; } due to used_size == group_size == 0. Link: http://lkml.kernel.org/r/20180404162647.15763-1-ynorov@caviumnetworks.com Fixes: 0a5ce083 ("lib/bitmap.c: make bitmap_parselist() thread-safe and much faster") Signed-off-by:
Yury Norov <ynorov@caviumnetworks.com> Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+6887cbb011c8054e8a3d@syzkaller.appspotmail.com> Cc: Noam Camus <noamca@mellanox.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mike Kravetz authored
This is a fix for a regression in 32 bit kernels caused by an invalid check for pgoff overflow in hugetlbfs mmap setup. The check incorrectly specified that the size of a loff_t was the same as the size of a long. The regression prevents mapping hugetlbfs files at offsets greater than 4GB on 32 bit kernels. On 32 bit kernels conversion from a page based unsigned long can not overflow a loff_t byte offset. Therefore, skip this check if sizeof(unsigned long) != sizeof(loff_t). Link: http://lkml.kernel.org/r/20180330145402.5053-1-mike.kravetz@oracle.com Fixes: 63489f8e ("hugetlbfs: check for pgoff value overflow") Reported-by:
Dan Rue <dan.rue@linaro.org> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Tested-by:
Anders Roxell <anders.roxell@linaro.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nic Losby <blurbdust@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Huacai Chen authored
Calling __stack_chk_guard_setup() in decompress_kernel() is too late that stack checking always fails for decompress_kernel() itself. So remove __stack_chk_guard_setup() and initialize __stack_chk_guard before we call decompress_kernel(). Original code comes from ARM but also used for MIPS and SH, so fix them together. If without this fix, compressed booting of these archs will fail because stack checking is enabled by default (>=4.16). Link: http://lkml.kernel.org/r/1522226933-29317-1-git-send-email-chenhc@lemote.com Fixes: 8779657d ("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG") Signed-off-by:
Huacai Chen <chenhc@lemote.com> Acked-by:
James Hogan <jhogan@kernel.org> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Rich Felker <dalias@libc.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 05 Apr, 2018 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc updates from Greg KH: "Here is the big set of char/misc driver patches for 4.17-rc1. There are a lot of little things in here, nothing huge, but all important to the different hardware types involved: - thunderbolt driver updates - parport updates (people still care...) - nvmem driver updates - mei updates (as always) - hwtracing driver updates - hyperv driver updates - extcon driver updates - ... and a handful of even smaller driver subsystem and individual driver updates All of these have been in linux-next with no reported issues" * tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits) hwtracing: Add HW tracing support menu intel_th: Add ACPI glue layer intel_th: Allow forcing host mode through drvdata intel_th: Pick up irq number from resources intel_th: Don't touch switch routing in host mode intel_th: Use correct method of finding hub intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate stm class: Make dummy's master/channel ranges configurable stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate MAINTAINERS: Bestow upon myself the care for drivers/hwtracing hv: add SPDX license id to Kconfig hv: add SPDX license to trace Drivers: hv: vmbus: do not mark HV_PCIE as perf_device Drivers: hv: vmbus: respect what we get from hv_get_synint_state() /dev/mem: Avoid overwriting "err" in read_mem() eeprom: at24: use SPDX identifier instead of GPL boiler-plate eeprom: at24: simplify the i2c functionality checking eeprom: at24: fix a line break eeprom: at24: tweak newlines eeprom: at24: refactor at24_probe() ... -
Linus Torvalds authored
Merge tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 4.17-rc1. There's really not much here, just a bunch of firmware code refactoring from Luis as he attempts to wrangle that codebase into something that is managable, along with a bunch of userspace tests for it. Other than that, a handful of small bugfixes and reverts of things that didn't work out. Full details are in the shortlog, it's not all that much. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) drivers: base: remove check for callback in coredump_store() mt7601u: use firmware_request_cache() to address cache on reboot firmware: add firmware_request_cache() to help with cache on reboot firmware: fix typo on pr_info_once() when ignore_sysfs_fallback is used firmware: explicitly include vmalloc.h firmware: ensure the firmware cache is not used on incompatible calls test_firmware: modify custom fallback tests to use unique files firmware: add helper to check to see if fw cache is setup firmware: fix checking for return values for fw_add_devm_name() rename: _request_firmware_load() fw_load_sysfs_fallback() test_firmware: test three firmware kernel configs using a proc knob test_firmware: expand on library with shared helpers firmware: enable to force disable the fallback mechanism at run time firmware: enable run time change of forcing fallback loader firmware: move firmware loader into its own directory firmware: split firmware fallback functionality into its own file firmware: move loading timeout under struct firmware_fallback_config firmware: use helpers for setting up a temporary cache timeout firmware: simplify CONFIG_FW_LOADER_USER_HELPER_FALLBACK further drivers: base: add description for .coredump() callback ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO updates from Greg KH: "Here is the big set of Staging/IIO driver patches for 4.17-rc1. It is a lot, over 500 changes, but not huge by previous kernel release standards. We deleted more lines than we added again (27k added vs. 91k remvoed), thanks to finally being able to delete the IRDA drivers and networking code. We also deleted the ccree crypto driver, but that's coming back in through the crypto tree to you, in a much cleaned-up form. Added this round is at lot of "mt7621" device support, which is for an embedded device that Neil Brown cares about, and of course a handful of new IIO drivers as well. And finally, the fsl-mc core code moved out of the staging tree to the "real" part of the kernel, which is nice to see happen as well. Full details are in the shortlog, which has all of the tiny cleanup patches described. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits) staging: rtl8723bs: Remove yield call, replace with cond_resched() staging: rtl8723bs: Replace yield() call with cond_resched() staging: rtl8723bs: Remove unecessary newlines from 'odm.h'. staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style. staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style. staging: rtl8723bs: Replace NULL pointer comparison with '!'. staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections. staging: rtl8723bs: Fix function signature that goes over 80 characters. staging: rtl8723bs: Fix lines too long in update_recvframe_attrib(). staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'. staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'. staging: rtl8723bs: Add missing braces in else statement. staging: rtl8723bs: Add spaces around ternary operators. staging: rtl8723bs: Fix lines with trailing open parentheses. staging: rtl8723bs: Remove unnecessary length #define's. staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants. staging: rtl8723bs: Fix alignment in rtw_wx_set_auth(). staging: rtl8723bs: Remove braces from single statement conditionals. staging: rtl8723bs: Remove unecessary braces from switch statement. staging: rtl8723bs: Fix newlines in rtw_wx_set_auth(). ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver patches for 4.17-rc1 Not all that big really, most are just small fixes and additions to existing drivers. There's a bunch of work on the imx serial driver recently for some reason, and a new embedded serial driver added as well. Full details are in the shortlog. All of these have been in the linux-next tree for a while with no reported issues" * tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits) serial: expose buf_overrun count through proc interface serial: mvebu-uart: fix tx lost characters tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe() tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP 8250-men-mcb: add support for 16z025 and 16z057 powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused serial: stm32: fix initialization of RS485 mode ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards vt: change SGR 21 to follow the standards serdev: Fix typo in serdev_device_alloc ARM: dts: STi: Fix aliases property name for STi boards tty: st-asc: Update tty alias serial: stm32: add support for RS485 hardware control mode dt-bindings: serial: stm32: add RS485 optional properties selftests: add devpts selftests devpts: comment devpts_mntget() devpts: resolve devpts bind-mounts devpts: hoist out check for DEVPTS_SUPER_MAGIC serial: 8250: Add Nuvoton NPCM UART serial: mxs-auart: disable clks of Alphascale ASM9260 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 4.17-rc1. Lots of USB typeC work happened this round, with code moving from the staging directory into the "real" part of the kernel, as well as new infrastructure being added to be able to handle the different types of "roles" that typeC requires. There is also the normal huge set of USB gadget controller and driver updates, along with XHCI changes, and a raft of other tiny fixes all over the USB tree. And the PHY driver updates are merged in here as well as they interacted with the USB drivers in some places. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits) Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870" usb: musb: gadget: misplaced out of bounds check usb: chipidea: imx: Fix ULPI on imx53 usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag usb: chipidea: usbmisc: small clean up usb: chipidea: usbmisc: evdo can be set e/o reset usb: chipidea: usbmisc: evdo is only specific to OTG port USB: serial: ftdi_sio: add Id for Physik Instrumente E-870 usb: dwc3: gadget: never call ->complete() from ->ep_queue() usb: gadget: udc: core: update usb_ep_queue() documentation usb: host: Remove the deprecated ATH79 USB host config options usb: roles: Fix return value check in intel_xhci_usb_probe() USB: gadget: f_midi: fixing a possible double-free in f_midi usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks usb: core: Copy parameter string correctly and remove superfluous null check USB: announce bcdDevice as well as idVendor, idProduct. USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw usb: hub: Reduce warning to notice on power loss USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator USB: serial: cp210x: add ELDAT Easywave RX09 id ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "This fixes some fallout from the net-next merge the other day, plus some non-merge-window-related bug fixes: 1) Fix sparse warnings in bcmgenet, systemport, b53, and mt7530 (Florian Fainelli) 2) pptp does a bogus dst_release() on a route we have a single refcount on, and attached to a socket, which needs that refcount (Eric Dumazet) 3) UDP connected sockets on ipv6 can race with route update handling, resulting in a pre-PMTU update route still stuck on the socket and thus continuing to get ICMPV6_PKT_TOOBIG errors. We end up never seeing the updated route. (Alexey Kodanev) 4) Missing list initializer(s) in TIPC (Jon Maloy) 5) Connect phy early to prevent crashes in lan78xx driver (Alexander Graf) 6) Fix build with modular NVMEM (Arnd Bergmann) 7) netdevsim canot mark nsim_devlink_net_ops and nsim_fib_net_ops as __net_initdata, as these are references from module unload unconditionally (Arnd Bergmann)" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits) netdevsim: remove incorrect __net_initdata annotations sfc: remove ctpio_dmabuf_start from stats inet: frags: fix ip6frag_low_thresh boundary tipc: Fix namespace violation in tipc_sk_fill_sock_diag net: avoid unneeded atomic operation in ip*_append_data() nvmem: disallow modular CONFIG_NVMEM net: hns3: fix length overflow when CONFIG_ARM64_64K_PAGES nfp: use full 40 bits of the NSP buffer address lan78xx: Connect phy early nfp: add a separate counter for packets with CHECKSUM_COMPLETE tipc: Fix missing list initializations in struct tipc_subscription ipv6: udp: set dst cache for a connected sk if current not valid ipv6: udp: convert 'connected' to bool type in udpv6_sendmsg() ipv6: allow to cache dst for a connected sk in ip6_sk_dst_lookup_flow() ipv6: add a wrapper for ip6_dst_store() with flowi6 checks net: phy: marvell10g: add thermal hwmon device pptp: remove a buggy dst release in pptp_connect() net: dsa: mt7530: Use NULL instead of plain integer net: dsa: b53: Fix sparse warnings in b53_mmap.c af_unix: remove redundant lockdep class ... -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto updates from Herbert Xu: "API: - add AEAD support to crypto engine - allow batch registration in simd Algorithms: - add CFB mode - add speck block cipher - add sm4 block cipher - new test case for crct10dif - improve scheduling latency on ARM - scatter/gather support to gcm in aesni - convert x86 crypto algorithms to skcihper Drivers: - hmac(sha224/sha256) support in inside-secure - aes gcm/ccm support in stm32 - stm32mp1 support in stm32 - ccree driver from staging tree - gcm support over QI in caam - add ks-sa hwrng driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (212 commits) crypto: ccree - remove unused enums crypto: ahash - Fix early termination in hash walk crypto: brcm - explicitly cast cipher to hash type crypto: talitos - don't leak pointers to authenc keys crypto: qat - don't leak pointers to authenc keys crypto: picoxcell - don't leak pointers to authenc keys crypto: ixp4xx - don't leak pointers to authenc keys crypto: chelsio - don't leak pointers to authenc keys crypto: caam/qi - don't leak pointers to authenc keys crypto: caam - don't leak pointers to authenc keys crypto: lrw - Free rctx->ext with kzfree crypto: talitos - fix IPsec cipher in length crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array() crypto: doc - clarify hash callbacks state machine crypto: api - Keep failed instances alive crypto: api - Make crypto_alg_lookup static crypto: api - Remove unused crypto_type lookup function crypto: chelsio - Remove declaration of static function from header crypto: inside-secure - hmac(sha224) support crypto: inside-secure - hmac(sha256) support ..
-
- 04 Apr, 2018 6 commits
-
-
Linus Torvalds authored
Merge tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains the new features we'd like to incorporate into the RISC-V port for 4.17. We might have a bit more stuff land later in the merge window, but I wanted to get this out earlier just so everyone can see where we currently stand. A short summary of the changes is: - We've added support for dynamic ftrace on RISC-V targets. - There have been a handful of cleanups to our atomic and locking routines. They now more closely match the released RISC-V memory model draft. - Our module loading support has been cleaned up and is now enabled by default, despite some limitations still existing. - A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE so the generic device tree code picks up handling all our command line stuff. There's more information in the merge commits for each patch set" * tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (21 commits) RISC-V: Rename CONFIG_CMDLINE_OVERRIDE to CONFIG_CMDLINE_FORCE RISC-V: Add definition of relocation types RISC-V: Enable module support in defconfig RISC-V: Support SUB32 relocation type in kernel module RISC-V: Support ADD32 relocation type in kernel module RISC-V: Support ALIGN relocation type in kernel module RISC-V: Support RVC_BRANCH/JUMP relocation type in kernel modulewq RISC-V: Support HI20/LO12_I/LO12_S relocation type in kernel module RISC-V: Support CALL relocation type in kernel module RISC-V: Support GOT_HI20/CALL_PLT relocation type in kernel module RISC-V: Add section of GOT.PLT for kernel module RISC-V: Add sections of PLT and GOT for kernel module riscv/atomic: Strengthen implementations with fences riscv/spinlock: Strengthen implementations with fences riscv/barrier: Define __smp_{store_release,load_acquire} riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support riscv/ftrace: Add dynamic function graph tracer support riscv/ftrace: Add dynamic function tracer support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Will Deacon: "Nothing particularly stands out here, probably because people were tied up with spectre/meltdown stuff last time around. Still, the main pieces are: - Rework of our CPU features framework so that we can whitelist CPUs that don't require kpti even in a heterogeneous system - Support for the IDC/DIC architecture extensions, which allow us to elide instruction and data cache maintenance when writing out instructions - Removal of the large memory model which resulted in suboptimal codegen by the compiler and increased the use of literal pools, which could potentially be used as ROP gadgets since they are mapped as executable - Rework of forced signal delivery so that the siginfo_t is well-formed and handling of show_unhandled_signals is consolidated and made consistent between different fault types - More siginfo cleanup based on the initial patches from Eric Biederman - Workaround for Cortex-A55 erratum #1024718 - Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi - Misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits) arm64: uaccess: Fix omissions from usercopy whitelist arm64: fpsimd: Split cpu field out from struct fpsimd_state arm64: tlbflush: avoid writing RES0 bits arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC arm64: fpsimd: include <linux/init.h> in fpsimd.h drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor perf: arm_spe: include linux/vmalloc.h for vmap() Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)" arm64: cpufeature: Avoid warnings due to unused symbols arm64: Add work around for Arm Cortex-A55 Erratum 1024718 arm64: Delay enabling hardware DBM feature arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35 arm64: capabilities: Handle shared entries arm64: capabilities: Add support for checks based on a list of MIDRs arm64: Add helpers for checking CPU MIDR against a range arm64: capabilities: Clean up midr range helpers arm64: capabilities: Change scope of VHE to Boot CPU feature ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "The usual pile of boring changes: - Consolidate tasklet functions to share code instead of duplicating it - The first step for making the low level entry handler management on multi-platform kernels generic - A new sysfs file which allows to retrieve the wakeup state of interrupts. - Ensure that the interrupt thread follows the effective affinity and not the programmed affinity to avoid cross core wakeups. - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm PDC) - Fix the wakeup path clock handling for Reneasas interrupt chips. - Rework the boot time register reset for ARM GIC-V2/3 - Better suspend/resume support for ARM GIV-V3/ITS - Add missing locking to the ARM GIC set_type() callback - Small fixes for the irq simulator code - SPDX identifiers for the irq core code and removal of boiler plate - Small cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) openrisc: Set CONFIG_MULTI_IRQ_HANDLER arm64: Set CONFIG_MULTI_IRQ_HANDLER genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER irqchip/gic: Take lock when updating irq type irqchip/gic: Update supports_deactivate static key to modern api irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling irqchip: Add a driver for the Microsemi Ocelot controller dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn irqchip/gic-v3: Don't try to reset AP0Rn irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs genirq: Remove license boilerplate/references genirq: Add missing SPDX identifiers genirq/matrix: Cleanup SPDX identifier genirq: Cleanup top of file comments genirq: Pass desc to __irq_free instead of irq number irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull time(r) updates from Thomas Gleixner: "A small set of updates for timers and timekeeping: - The most interesting change is the consolidation of clock MONOTONIC and clock BOOTTIME. Clock MONOTONIC behaves now exactly like clock BOOTTIME and does not longer ignore the time spent in suspend. A new clock MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in kernels before this change. This allows applications to programmatically check for the clock MONOTONIC behaviour. As discussed in the review thread, this has the potential of breaking user space and we might have to revert this. Knock on wood that we can avoid that exercise. - Updates to the NTP mechanism to improve accuracy - A new kernel internal data structure to aid the ongoing Y2038 work. - Cleanups and simplifications of the clocksource code. - Make the alarmtimer code play nicely with debugobjects" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Init nanosleep alarm timer on stack y2038: Introduce struct __kernel_old_timeval tracing: Unify the "boot" and "mono" tracing clocks hrtimer: Unify MONOTONIC and BOOTTIME clock behavior posix-timers: Unify MONOTONIC and BOOTTIME clock behavior timekeeping: Remove boot time specific code Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock timekeeping/ntp: Determine the multiplier directly from NTP tick length timekeeping/ntp: Don't align NTP frequency adjustments to ticks clocksource: Use ATTRIBUTE_GROUPS clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes clocksource: Don't walk the clocksource list for empty override -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull /dev/random updates from Ted Ts'o: "A few random (cough, cough) cleanups for the /dev/random driver" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: drivers/char/random.c: remove unused dont_count_entropy random: optimize add_interrupt_randomness random: always fill buffer in get_random_bytes_wait random: use a tighter cap in credit_entropy_bits_safe()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "Cleanups and bugfixes for ext4, including some fixes to make ext4 more robust against maliciously crafted file system images. (I still don't recommend that container folks hold any delusions that mounting arbitary images that can be crafted by malicious attackers should be considered sane thing to do, though!)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits) ext4: force revalidation of directory pointer after seekdir(2) ext4: add extra checks to ext4_xattr_block_get() ext4: add bounds checking to ext4_xattr_find_entry() ext4: move call to ext4_error() into ext4_xattr_check_block() ext4: don't show data=<mode> option if defaulted ext4: omit init_itable=n in procfs when disabled ext4: show more binary mount options in procfs ext4: simplify kobject usage ext4: remove unused parameters in sysfs code ext4: null out kobject* during sysfs cleanup ext4: don't allow r/w mounts if metadata blocks overlap the superblock ext4: always initialize the crc32c checksum driver ext4: fail ext4_iget for root directory if unallocated ext4: limit xattr size to INT_MAX ext4: add validity checks for bitmap block numbers ext4: fix comments in ext4_swap_extents() ext4: use generic_writepages instead of __writepage/write_cache_pages ext4: don't complain about incorrect features when probing ext4: remove EXT4_STATE_DIOREAD_LOCK flag ext4: fix offset overflow on 32-bit archs in ext4_iomap_begin() ...
-
