During device enumeration usb core resets endpoint 0 if the max packet
size value differs from the one read from the device descriptor.

usb core will additionally reset endpoint 0 during S4 resume, before
re-enumerating the device, if the device has a reset-resume flag set.

In this case the xhci device representation vdev may be lost due to
xHC restore error and re-initialization during S4 resume.

Make sure slot_id and vdev are valid before trying to re-configure max
packet size during endpoint 0 reset.
max packet size will be re-configured later during re-enumeration.

This fixes commit e34900f4 ("xhci: Reconfigure endpoint 0 max packet
size only during endpoint reset") which is currently in usb-next,
on its way to 6.8

Fixes: e34900f4 ("xhci: Reconfigure endpoint 0 max packet size only during endpoint reset")
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231215125707.1732989-2-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dwc3_imx8mp_pm_resume() warn: 'dwc3_imx->suspend_clk'
from clk_prepare_enable() not released
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>

Link: https://lore.kernel.org/r/20231215143458.158810-1-himanshu.bhavani@siliconsignals.ioSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 588b9e85 ("usb: gadget: uvc: add v4l2 enumeration api calls")
has rendered the precomposed (aka legacy) webcam gadget unloadable.

uvc_alloc() since then has depended on certain config groups being
available in configfs tree related to the UVC function. However, legacy
gadgets do not create anything in configfs, so uvc_alloc() must fail
with -ENOENT no matter what.

This patch mimics the required configfs hierarchy to satisfy the code which
inspects formats and frames found in uvcg_streaming_header.

This has been tested with guvcview on the host side, using vivid as a
source of video stream on the device side and using the userspace program
found at https://gitlab.freedesktop.org/camera/uvc-gadget.git.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Fixes: 588b9e85 ("usb: gadget: uvc: add v4l2 enumeration api calls")
Link: https://lore.kernel.org/r/20231215131614.29132-1-andrzej.p@collabora.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add X1E80100 to the DT schema.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231214-x1e80100-usb-v1-1-c22be5c0109e@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed one typo.
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Link: https://lore.kernel.org/r/20231215083930.566164-1-ghanshyam1898@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Create an error message or upon deferral add a description for sysfs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20231214144011.1987586-1-alexander.stein@ew.tq-group.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When compiling with gcc version 14.0.0 20231206 (experimental)
and CONFIG_FORTIFY_SOURCE=y, I've noticed the following warning:

...
In function 'fortify_memcpy_chk',
    inlined from '__ffs_func_bind_do_os_desc' at drivers/usb/gadget/function/f_fs.c:2934:3:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  588 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This call to 'memcpy()' is interpreted as an attempt to copy both
'CompatibleID' and 'SubCompatibleID' of 'struct usb_ext_compat_desc'
from an address of the first one, which causes an overread warning.
Since we actually want to copy both of them at once, use the
convenient 'struct_group()' and 'sizeof_field()' here.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231214090428.27292-1-dmantipov@yandex.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.

In the case of sysfs call-backs, new wrappers exist that do just that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc:  <usb-storage@lists.one-eyed-alien.net>
Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231213164246.1021885-13-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.

In the case of sysfs call-backs, new wrappers exist that do just that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Hema HK <hemahk@ti.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-12-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-11-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-10-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Whilst we're at it, let's define some magic numbers to increase
readability and ease of maintenance.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-9-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Cristian Birsan <cristian.birsan@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc:  <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-8-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-7-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Cristian Birsan <cristian.birsan@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc:  <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-6-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Scally <dan.scally@ideasonboard.com>
Cc: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20231213164246.1021885-5-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: James Gruber <jimmyjgruber@gmail.com>
Cc: Yadwinder Singh <yadi.brar01@gmail.com>
Cc: Jaswinder Singh <jaswinder.singh@linaro.org>
Cc: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-4-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Cc: Julian Scheel <julian@jusst.de>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-3-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array.  However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it.  This misunderstanding has led to buffer-overruns
in the past.  It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases).  So let's
do that.

Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-2-lee@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Patch adds support of SS and SSP speed.
Tested with rockchip rk3399 dwc3
Signed-off-by: Perr Zhang <perr@usb7.net>
Link: https://lore.kernel.org/r/20231213112106.605260-1-strongbox8@zoho.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a
functionally separate USB SubSystem for Altmode/Analog Audio Switch
accessible over an I2C interface.

It provides switching USB-C USB2.0 lines between USB and Audio Headphones
speaker lines, and the USB-C SBU lines between DisplayPort AUX and Audio
Headphones Microphone/Ground.

The Audio Headphone and Microphone data path between the Codec and the
USB-C Mux subsystems are external to the IC, thus requiring DT
port-endpoint graph description to handle USB-C altmode & orientation
switching for Audio Accessory Mode.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231212-topic-sm8650-upstream-wcd939x-usbss-v2-2-38961fea5867@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Document the Qualcomm WCD9390/WCD9395 USB SubSystem Altmode/Analog Audio Switch
which is a separate USB SubSystem for Altmode/Analog Audio Switch accessible
over an I2C interface.

Since Audio Headphone and Microphone data path between the Codec and the USB-C Mux
subsystems are external to the IC, it requires a second port to handle USB-C altmode
& orientation switching for Audio Accessory Mode to the Codec SubSystem.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231212-topic-sm8650-upstream-wcd939x-usbss-v2-1-38961fea5867@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's possible that usb_choose_configuration() can get called when a
USB device has no driver. In this case the recent commit a87b8e3b
("usb: core: Allow subclassed USB drivers to override
usb_choose_configuration()") can cause a crash since it dereferenced
the driver structure without checking for NULL. Let's add a check.

A USB device with no driver is an anomaly, so make
usb_choose_configuration() return immediately if there is no driver.

This was seen in the real world when usbguard got ahold of a r8152
device at the wrong time. It can also be simulated via this on a
computer with one r8152-based USB Ethernet adapter:
  cd /sys/bus/usb/drivers/r8152-cfgselector
  to_unbind="$(ls -d *-*)"
  real_dir="$(readlink -f "${to_unbind}")"
  echo "${to_unbind}" > unbind
  cd "${real_dir}"
  echo 0 > authorized
  echo 1 > authorized

Fixes: a87b8e3b ("usb: core: Allow subclassed USB drivers to override usb_choose_configuration()")
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20231211073237.v3.1.If27eb3bf7812f91ab83810f232292f032f4203e0@changeidSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Source-only port partner will always respond NOT_SUPPORTED to
GET_SINK_CAP. Avoid this redundant AMS by bailing out querying the FRS
capability if the Source port partner is not DRP.
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231205074747.1821297-1-kyletso@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Follow the bindings and use 16-bit value for AltMode SVID instead of
using the full u32.

Fixes: b3dea914 ("arm64: dts: qcom: qrb5165-rb5: enable DP altmode")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231204020303.2287338-4-dmitry.baryshkov@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As stated in the changelog for the commit 7b458a4c ("usb: typec: Add
typec_port_register_altmodes()"), the code should be adjusted according
to the AltMode bindings. As the SVID is 16 bits wide (according to the
USB PD Spec), use fwnode_property_read_u16() to read it.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231204020303.2287338-3-dmitry.baryshkov@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add description of the USB-C AltModes supported on the particular USB-C
connector. This is required for devices like Qualcomm Robotics RB5,
which have no other way to express alternative modes supported by the
hardware platform.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231204020303.2287338-2-dmitry.baryshkov@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/c7b99c4f52649ce6405779fbf9170edc5633fdbb.1702229697.git.christophe.jaillet@wanadoo.frSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/8bf382976c0ba0986c0dbe93427266273f0776ef.1702230217.git.christophe.jaillet@wanadoo.frSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the misspelled "Controller" and "Type-C" words.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231207172912.2658226-1-festevam@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'peer-hub' is a valid property for the hub.

Document it to fix the following dt-schema warning:

imx8mp-debix-som-a-bmb-08.dtb: hub@1: 'peer-hub' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231207124217.2530457-1-festevam@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In ACM support for sending breaks to devices is optional.
If a device says that it doenot support sending breaks,
the host must respect that.
Given the number of optional features providing tty operations
for each combination is not practical and errors need to be
returned dynamically if unsupported features are requested.

In case a device does not support break, we want the tty layer
to treat that like it treats drivers that statically cannot
support sending a break. It ignores the inability and does nothing.
This patch uses EOPNOTSUPP to indicate that.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 9e98966c ("tty: rework break handling")
Link: https://lore.kernel.org/r/20231207132639.18250-1-oneukum@suse.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Improve error handling for PM APIs in the dwc3_xlnx_probe function by
introducing devm_pm_runtime_enable and error label. Removed unnecessary
API pm_runtime_disable call in dwc3_xlnx_remove.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1700590878-124335-1-git-send-email-radhey.shyam.pandey@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct kernel-doc comments to prevent warnings from
scripts/kernel-doc.

fotg210-udc.c:1103: warning: Function parameter or member 'g' not described in 'fotg210_vbus_session'
fotg210-udc.c:1103: warning: Excess function parameter '_gadget' description in 'fotg210_vbus_session'
fotg210-udc.c:1103: warning: No description found for return value of 'fotg210_vbus_session'
fotg210-udc.c:1129: warning: No description found for return value of 'fotg210_phy_event'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc:  <linux-usb@vger.kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231206181335.27540-1-rdunlap@infradead.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a common C comment "/*" instead of "/**" to prevent a warning
from scripts/kernel-doc.

cdns3-starfive.c:23: warning: expecting prototype for cdns3(). Prototype was for USB_STRAP_HOST() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Minda Chen <minda.chen@starfivetech.com>
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc:  <linux-usb@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20231206181317.27515-1-rdunlap@infradead.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the USB fixes in here as well to build off of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull scheduler fix from Borislav Petkov:

 - Make sure tasks are thawed exactly and only once to avoid their state
   getting corrupted

* tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  freezer,sched: Do not restore saved_state of a thawed task

Pull perf event fix from Borislav Petkov:

 - Make sure perf event size validation is done on every event in the
   group

* tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_event_validate_size()

Pull x86 fixes from Borislav Petkov:

 - Add a forgotten CPU vendor check in the AMD microcode post-loading
   callback so that the callback runs only on AMD

 - Make sure SEV-ES protocol negotiation happens only once and on the
   BSP

* tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Check vendor in the AMD microcode callback
  x86/sev: Fix kernel crash due to late update to read-only ghcb_version