- 04 Aug, 2011 31 commits
-
-
Hugh Dickins authored
Make the radix_tree exceptional cases, mostly in filemap.c, clearer. It's hard to devise a suitable snappy name that illuminates the use by shmem/tmpfs for swap, while keeping filemap/pagecache/radix_tree generality. And akpm points out that /* radix_tree_deref_retry(page) */ comments look like calls that have been commented out for unknown reason. Skirt the naming difficulty by rearranging these blocks to handle the transient radix_tree_deref_retry(page) case first; then just explain the remaining shmem/tmpfs swap case in a comment. Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
We have already acknowledged that swapoff of a tmpfs file is slower than it was before conversion to the generic radix_tree: a little slower there will be acceptable, if the hotter paths are faster. But it was a shock to find swapoff of a 500MB file 20 times slower on my laptop, taking 10 minutes; and at that rate it significantly slows down my testing. Now, most of that turned out to be overhead from PROVE_LOCKING and PROVE_RCU: without those it was only 4 times slower than before; and more realistic tests on other machines don't fare as badly. I've tried a number of things to improve it, including tagging the swap entries, then doing lookup by tag: I'd expected that to halve the time, but in practice it's erratic, and often counter-productive. The only change I've so far found to make a consistent improvement, is to short-circuit the way we go back and forth, gang lookup packing entries into the array supplied, then shmem scanning that array for the target entry. Scanning in place doubles the speed, so it's now only twice as slow as before (or three times slower when the PROVEs are on). So, add radix_tree_locate_item() as an expedient, once-off, single-caller hack to do the lookup directly in place. #ifdef it on CONFIG_SHMEM and CONFIG_SWAP, as much to document its limited applicability as save space in other configurations. And, sadly, #include sched.h for cond_resched(). Signed-off-by:
-
Hugh Dickins authored
Remove PageSwapBacked (!page_is_file_cache) cases from add_to_page_cache_locked() and add_to_page_cache_lru(): those pages now go through shmem_add_to_page_cache(). Remove a comment on maximum tmpfs size from fsstack_copy_inode_size(), and add a comment on swap entries to invalidate_mapping_pages(). And mincore_page() uses find_get_page() on what might be shmem or a tmpfs file: allow for a radix_tree_exceptional_entry(), and proceed to find_get_page() on swapper_space if so (oh, swapper_space needs #ifdef). Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Hugh Dickins authored
But we've not yet removed the old swp_entry_t i_direct[16] from shmem_inode_info. That's because it was still being shared with the inline symlink. Remove it now (saving 64 or 128 bytes from shmem inode size), and use kmemdup() for short symlinks, say, those up to 128 bytes. I wonder why mpol_free_shared_policy() is done in shmem_destroy_inode() rather than shmem_evict_inode(), where we usually do such freeing? I guess it doesn't matter, and I'm not into NUMA mpol testing right now. Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Hugh Dickins authored
Convert shmem_writepage() to use shmem_delete_from_page_cache() to use shmem_radix_tree_replace() to substitute swap entry for page pointer atomically in the radix tree. As with shmem_add_to_page_cache(), it's not entirely satisfactory to be copying such code from delete_from_swap_cache, but again judged easier to sell than making its other callers go through the extras. Remove the toy implementation's shmem_put_swap() and shmem_get_swap(), now unreferenced, and the hack to disable swap: it's now good to go. The way things have worked out, info->lock no longer helps to guard the shmem_swaplist: we increment swapped under shmem_swaplist_mutex only. That global mutex exclusion between shmem_writepage() and shmem_unuse() is not pretty, and we ought to find another way; but it's been forced on us by recent race discoveries, not a consequence of this patchset. And what has become of the WARN_ON_ONCE(1) free_swap_and_cache() if a swap entry was found already present? That's no longer possible, the (unknown) one inserting this page into filecache would hit the swap entry occupying that slot. Signed-off-by:
-
Hugh Dickins authored
Remove mem_cgroup_shmem_charge_fallback(): it was only required when we had to move swappage to filecache with GFP_NOWAIT. Remove the GFP_NOWAIT special case from mem_cgroup_cache_charge(), by moving its call out from shmem_add_to_page_cache() to two of thats three callers. But leave it doing mem_cgroup_uncharge_cache_page() on error: although asymmetrical, it's easier for all 3 callers to handle. These two changes would also be appropriate if anyone were to start using shmem_read_mapping_page_gfp() with GFP_NOWAIT. Remove mem_cgroup_get_shmem_target(): mc_handle_file_pte() can test radix_tree_exceptional_entry() to get what it needs for itself. Signed-off-by:
-
Hugh Dickins authored
Convert shmem_getpage_gfp(), the engine-room of shmem, to expect page or swap entry returned from radix tree by find_lock_page(). Whereas the repetitive old method proceeded mainly under info->lock, dropping and repeating whenever one of the conditions needed was not met, now we can proceed without it, leaving shmem_add_to_page_cache() to check for a race. This way there is no need to preallocate a page, no need for an early radix_tree_preload(), no need for mem_cgroup_shmem_charge_fallback(). Move the error unwinding down to the bottom instead of repeating it throughout. ENOSPC handling is a little different from before: there is no longer any race between find_lock_page() and finding swap, but we can arrive at ENOSPC before calling shmem_recalc_inode(), which might occasionally discover freed space. Be stricter to check i_size before returning. info->lock is used for little but alloced, swapped, i_blocks updates. Move i_blocks updates out from under the max_blocks check, so even an unlimited size=0 mount can show accurate du. Signed-off-by:
-
Hugh Dickins authored
Convert shmem_unuse_inode() to use a lockless gang lookup of the radix tree, searching for matching swap. This is somewhat slower than the old method: because of repeated radix tree descents, because of copying entries up, but probably most because the old method noted and skipped once a vector page was cleared of swap. Perhaps we can devise a use of radix tree tagging to achieve that later. shmem_add_to_page_cache() uses shmem_radix_tree_replace() to compensate for the lockless lookup by checking that the expected entry is in place, under lock. It is not very satisfactory to be copying this much from add_to_page_cache_locked(), but I think easier to sell than insisting that every caller of add_to_page_cache*() go through the extras. Signed-off-by:
-
Hugh Dickins authored
Disable the toy swapping implementation in shmem_writepage() - it's hard to support two schemes at once - and convert shmem_truncate_range() to a lockless gang lookup of swap entries along with pages, freeing both. Since the second loop tightens its noose until all entries of either kind have been squeezed out (and we shall make sure that there's not an instant when neither is visible), there is no longer a need for yet another pass below. shmem_radix_tree_replace() compensates for the lockless lookup by checking that the expected entry is in place, under lock, before replacing it. Here it just deletes, but will be used in later patches to substitute swap entry for page or page for swap entry. Signed-off-by:
-
Hugh Dickins authored
Bring truncate.c's code for truncate_inode_pages_range() inline into shmem_truncate_range(), replacing its first call (there's a followup call below, but leave that one, it will disappear next). Don't play with it yet, apart from leaving out the cleancache flush, and (importantly) the nrpages == 0 skip, and moving shmem_setattr()'s partial page preparation into its partial page handling. Signed-off-by:
-
Hugh Dickins authored
While it's at its least, make a number of boring nitpicky cleanups to shmem.c, mostly for consistency of variable naming. Things like "swap" instead of "entry", "pgoff_t index" instead of "unsigned long idx". And since everything else here is prefixed "shmem_", better change init_tmpfs() to shmem_init(). Signed-off-by:
-
Hugh Dickins authored
The maximum size of a shmem/tmpfs file has been limited by the maximum size of its triple-indirect swap vector. With 4kB page size, maximum filesize was just over 2TB on a 32-bit kernel, but sadly one eighth of that on a 64-bit kernel. (With 8kB page size, maximum filesize was just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel, MAX_LFS_FILESIZE being then more restrictive than swap vector layout.) It's a shame that tmpfs should be more restrictive than ramfs, and this limitation has now been noticed. Add another level to the swap vector? No, it became obscure and hard to maintain, once I complicated it to make use of highmem pages nine years ago: better choose another way. Surely, if 2.4 had had the radix tree pagecache introduced in 2.5, then tmpfs would never have invented its own peculiar radix tree: we would have fitted swap entries into the common radix tree instead, in much the same way as we fit swap entries into page tables. And why should each file have a separate radix tree for its pages and for its swap entries? The swap entries are required precisely where and when the pages are not. We want to put them together in a single radix tree: which can then avoid much of the locking which was needed to prevent them from being exchanged underneath us. This also avoids the waste of memory devoted to swap vectors, first in the shmem_inode itself, then at least two more pages once a file grew beyond 16 data pages (pages accounted by df and du, but not by memcg). Allocated upfront, to avoid allocation when under swapping pressure, but pure waste when CONFIG_SWAP is not set - I have never spattered around the ifdefs to prevent that, preferring this move to sharing the common radix tree instead. There are three downsides to sharing the radix tree. One, that it binds tmpfs more tightly to the rest of mm, either requiring knowledge of swap entries in radix tree there, or duplication of its code here in shmem.c. I believe that the simplications and memory savings (and probable higher performance, not yet measured) justify that. Two, that on HIGHMEM systems with SWAP enabled, it's the lowmem radix nodes that cannot be freed under memory pressure - whereas before it was the less precious highmem swap vector pages that could not be freed. I'm hoping that 64-bit has now been accessible for long enough, that the highmem argument has grown much less persuasive. Three, that swapoff is slower than it used to be on tmpfs files, since it's using a simple generic mechanism not tailored to it: I find this noticeable, and shall want to improve, but maybe nobody else will notice. So... now remove most of the old swap vector code from shmem.c. But, for the moment, keep the simple i_direct vector of 16 pages, with simple accessors shmem_put_swap() and shmem_get_swap(), as a toy implementation to help mark where swap needs to be handled in subsequent patches. Signed-off-by:
-
Hugh Dickins authored
If swap entries are to be stored along with struct page pointers in a radix tree, they need to be distinguished as exceptional entries. Most of the handling of swap entries in radix tree will be contained in shmem.c, but a few functions in filemap.c's common code need to check for their appearance: find_get_page(), find_lock_page(), find_get_pages() and find_get_pages_contig(). So as not to slow their fast paths, tuck those checks inside the existing checks for unlikely radix_tree_deref_slot(); except for find_lock_page(), where it is an added test. And make it a BUG in find_get_pages_tag(), which is not applied to tmpfs files. A part of the reason for eliminating shmem_readpage() earlier, was to minimize the places where common code would need to allow for swap entries. The swp_entry_t known to swapfile.c must be massaged into a slightly different form when stored in the radix tree, just as it gets massaged into a pte_t when stored in page tables. In an i386 kernel this limits its information (type and page offset) to 30 bits: given 32 "types" of swapfile and 4kB pagesize, that's a maximum swapfile size of 128GB. Which is less than the 512GB we previously allowed with X86_PAE (where the swap entry can occupy the entire upper 32 bits of a pte_t), but not a new limitation on 32-bit without PAE; and there's not a new limitation on 64-bit (where swap filesize is already limited to 16TB by a 32-bit page offset). Thirty areas of 128GB is probably still enough swap for a 64GB 32-bit machine. Provide swp_to_radix_entry() and radix_to_swp_entry() conversions, and enforce filesize limit in read_swap_header(), just as for ptes. Signed-off-by:
-
Hugh Dickins authored
A patchset to extend tmpfs to MAX_LFS_FILESIZE by abandoning its peculiar swap vector, instead keeping a file's swap entries in the same radix tree as its struct page pointers: thus saving memory, and simplifying its code and locking. This patch: The radix_tree is used by several subsystems for different purposes. A major use is to store the struct page pointers of a file's pagecache for memory management. But what if mm wanted to store something other than page pointers there too? The low bit of a radix_tree entry is already used to denote an indirect pointer, for internal use, and the unlikely radix_tree_deref_retry() case. Define the next bit as denoting an exceptional entry, and supply inline functions radix_tree_exception() to return non-0 in either unlikely case, and radix_tree_exceptional_entry() to return non-0 in the second case. If a subsystem already uses radix_tree with that bit set, no problem: it does not affect internal workings at all, but is defined for the convenience of those storing well-aligned pointers in the radix_tree. The radix_tree_gang_lookups have an implicit assumption that the caller can deduce the offset of each entry returned e.g. by the page->index of a struct page. But that may not be feasible for some kinds of item to be stored there. radix_tree_gang_lookup_slot() allow for an optional indices argument, output array in which to return those offsets. The same could be added to other radix_tree_gang_lookups, but for now keep it to the only one for which we need it. Signed-off-by:
-
Andrew Morton authored
i386 allmodconfig: drivers/built-in.o: In function `aat2870_bl_remove': aat2870_bl.c:(.text+0x414f9): undefined reference to `backlight_device_unregister' drivers/built-in.o: In function `aat2870_bl_probe': aat2870_bl.c:(.text+0x418fc): undefined reference to `backlight_device_register' aat2870_bl.c:(.text+0x41a31): undefined reference to `backlight_device_unregiste Cc: Jin Park <jinyoungp@nvidia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Axel Lin authored
- Current implementation tests wrong value for setting aat2870_bl->max_current. - In the current implementation, we cannot differentiate between 2 cases: a) if pdata->max_current is not set , or b) pdata->max_current is set to AAT2870_CURRENT_0_45 (which is also 0). Fix it by setting AAT2870_CURRENT_0_45 to be 1 and adjust the equation in aat2870_brightness() accordingly. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Tested-by:
Jin Park <jinyoungp@nvidia.com> Signed-off-by:
-
Axel Lin authored
backlight_device_register() returns ERR_PTR() on error. Signed-off-by:
-
WANG Cong authored
Fix: arch/cris/arch-v10/kernel/irq.c:239: error: implicit declaration of function 'kgdb_init' arch/cris/arch-v10/kernel/irq.c:240: error: implicit declaration of function 'breakpoint' Declare these two functions. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: <stable@kernel.org> Signed-off-by:
-
WANG Cong authored
Fix: arch/cris/arch-v10/drivers/sync_serial.c:961: error: conflicting types for 'sync_serial_ioctl' Reported-by:
-
WANG Cong authored
Fix: arch/cris/arch-v10/drivers/sync_serial.c:628: error: 'ret' undeclared (first use in this function) 'ret' should be 'err'. Reported-by:
-
WANG Cong authored
Fix this error: kernel/fork.c:267: error: implicit declaration of function 'alloc_thread_info_node' This is due to renaming alloc_thread_info() to alloc_thread_info_node(). [akpm@linux-foundation.org: coding-style fixes] Reported-by:
-
Randy Dunlap authored
Fix tpm_tis.c build when CONFIG_ACPI is not enabled by providing a stub function. Fixes many build errors/warnings: drivers/char/tpm/tpm_tis.c:89: error: dereferencing pointer to incomplete type drivers/char/tpm/tpm_tis.c:89: warning: type defaults to 'int' in declaration of 'type name' drivers/char/tpm/tpm_tis.c:89: error: request for member 'list' in something not a structure or union ... Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Leendert van Doorn <leendert@watson.ibm.com> Cc: James Morris <jmorris@namei.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Johannes Weiner authored
__GFP_OTHER_NODE is used for NUMA allocations on behalf of other nodes. It's supposed to be passed through from the page allocator to zone_statistics(), but it never gets there as gfp_allowed_mask is not wide enough and masks out the flag early in the allocation path. The result is an accounting glitch where successful NUMA allocations by-agent are not properly attributed as local. Increase __GFP_BITS_SHIFT so that it includes __GFP_OTHER_NODE. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Andi Kleen <ak@linux.intel.com> Reviewed-by:
Minchan Kim <minchan.kim@gmail.com> Acked-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Sergiu Iordache authored
Update the module parameters when platform data is used. This means that they can be read from /sys/module/ramoops/parameters in order to parse the memory area. Signed-off-by:
Sergiu Iordache <sergiu@chromium.org> Cc: Marco Stornelli <marco.stornelli@gmail.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by:
-
Will Drewry authored
Update kernel-parameters.txt to point users to the authoritative comment for name_to_dev_t. In addition, updates other places where some name_to_dev_t behavior was discussed. All other references to root= appear to be for explicit sample usage or just side comments when discussing other kernel parameters. Signed-off-by:
Will Drewry <wad@chromium.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Randy Dunlap authored
Fix new kernel-doc warning in fs/dcache.c: Warning(fs/dcache.c:797): No description found for parameter 'sb' Signed-off-by:
-
Rusty Russell authored
The current hyper-optimized functions are overkill if you simply want to allocate an id for a device. Create versions which use an internal lock. In followup patches, numerous drivers are converted to use this interface. Thanks to Tejun for feedback. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Acked-by:
Tejun Heo <tj@kernel.org> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Oleg Nesterov authored
When send_cpu_listeners() finds the orphaned listener it marks it as !valid and drops listeners->sem. Before it takes this sem for writing, s->pid can be reused and add_del_listener() can wrongly try to re-use this entry. Change add_del_listener() to check ->valid = T. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reviewed-by:
Vasiliy Kulikov <segoon@openwall.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
1. Commit 26c4caea "don't allow duplicate entries in listener mode" changed add_del_listener(REGISTER) so that "next_cpu:" can reuse the listener allocated for the previous cpu, this doesn't look exactly right even if minor. Change the code to kfree() in the already-registered case, this case is unlikely anyway so the extra kmalloc_node() shouldn't hurt but looke more correct and clean. 2. use the plain list_for_each_entry() instead of _safe() to scan listeners->list. 3. Remove the unneeded INIT_LIST_HEAD(&s->list), we are going to list_add(&s->list). Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
-
Daniel Glöckner authored
As the comment explains, the intention of the code is to clear the OMAP_RTC_CTRL_MODE_12_24 bit, but instead it only clears the OMAP_RTC_CTRL_SPLIT and OMAP_RTC_CTRL_AUTO_COMP bits, which should be kept. OMAP_RTC_CTRL_DISABLE, OMAP_RTC_CTRL_SET_32_COUNTER, OMAP_RTC_CTRL_TEST, and OMAP_RTC_CTRL_ROUND_30S are also better off being cleared. Signed-off-by:
Daniel Glöckner <dg@emlix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Akinobu Mita authored
init_fault_attr_dentries() is used to export fault_attr via debugfs. But it can only export it in debugfs root directory. Per Forlin is working on mmc_fail_request which adds support to inject data errors after a completed host transfer in MMC subsystem. The fault_attr for mmc_fail_request should be defined per mmc host and export it in debugfs directory per mmc host like /sys/kernel/debug/mmc0/mmc_fail_request. init_fault_attr_dentries() doesn't help for mmc_fail_request. So this introduces fault_create_debugfs_attr() which is able to create a directory in the arbitrary directory and replace init_fault_attr_dentries(). [akpm@linux-foundation.org: extraneous semicolon, per Randy] Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Tested-by:
Per Forlin <per.forlin@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 03 Aug, 2011 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'pstore-efi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: efivars: fix warnings when CONFIG_PSTORE=n
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6Linus Torvalds authored
* 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: tools/power turbostat: fit output into 80 columns on snb-ep tools/power x86_energy_perf_policy: fix print of uninitialized string
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (28 commits) ACPI: delete stale reference in kernel-parameters.txt ACPI: add missing _OSI strings ACPI: remove NID_INVAL thermal: make THERMAL_HWMON implementation fully internal thermal: split hwmon lookup to a separate function thermal: hide CONFIG_THERMAL_HWMON ACPI print OSI(Linux) warning only once ACPI: DMI workaround for Asus A8N-SLI Premium and Asus A8N-SLI DELUX ACPI / Battery: propagate sysfs error in acpi_battery_add() ACPI / Battery: avoid acpi_battery_add() use-after-free ACPI: introduce "acpi_rsdp=" parameter for kdump ACPI: constify ops structs ACPI: fix CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS ACPI: fix 80 char overflow ACPI / Battery: Resolve the race condition in the sysfs_remove_battery() ACPI / Battery: Add the check before refresh sysfs in the battery_notify() ACPI / Battery: Add the hibernation process in the battery_notify() ACPI / Battery: Rename acpi_battery_quirks2 with acpi_battery_quirks ACPI / Battery: Change 16-bit signed negative battery current into correct value ACPI / Battery: Add the power unit macro ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile/mm/init.c: trivial: use BUG_ON arch/tile: remove useless set_fixmap_nocache() macro arch/tile: add hypervisor-based character driver for SPI flash ROM ioctl-number.txt: add the tile hardwall ioctl range tile: use generic-y format for one-line asm-generic headers clocksource: tile: convert to use clocksource_register_hz
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (31 commits) Btrfs: don't call writepages from within write_full_page Btrfs: Remove unused variable 'last_index' in file.c Btrfs: clean up for find_first_extent_bit() Btrfs: clean up for wait_extent_bit() Btrfs: clean up for insert_state() Btrfs: remove unused members from struct extent_state Btrfs: clean up code for merging extent maps Btrfs: clean up code for extent_map lookup Btrfs: clean up search_extent_mapping() Btrfs: remove redundant code for dir item lookup Btrfs: make acl functions really no-op if acl is not enabled Btrfs: remove remaining ref-cache code Btrfs: remove a BUG_ON() in btrfs_commit_transaction() Btrfs: use wait_event() Btrfs: check the nodatasum flag when writing compressed files Btrfs: copy string correctly in INO_LOOKUP ioctl Btrfs: don't print the leaf if we had an error btrfs: make btrfs_set_root_node void Btrfs: fix oops while writing data to SSD partitions Btrfs: Protect the readonly flag of block group ... Fix up trivial conflicts (due to acl and writeback cleanups) in - fs/btrfs/acl.c - fs/btrfs/ctree.h - fs/btrfs/extent_io.c
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: MAINTAINERS: Add keyword match for of_match_table to device tree section of: constify property name parameters for helper functions input: xilinx_ps2: Add missing of_address.h header of: address: use resource_size helper
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: remove function cannot exit
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (34 commits) dm table: set flush capability based on underlying devices dm crypt: optionally support discard requests dm raid: add md raid1 support dm raid: support metadata devices dm raid: add write_mostly parameter dm raid: add region_size parameter dm raid: improve table parameters documentation dm ioctl: forbid multiple device specifiers dm ioctl: introduce __get_dev_cell dm ioctl: fill in device parameters in more ioctls dm flakey: add corrupt_bio_byte feature dm flakey: add drop_writes dm flakey: support feature args dm flakey: use dm_target_offset and support discards dm table: share target argument parsing functions dm snapshot: skip reading origin when overwriting complete chunk dm: ignore merge_bvec for snapshots when safe dm table: clean dm_get_device and move exports dm raid: tidy includes dm ioctl: prevent empty message ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog: watchdog: Cleanup WATCHDOG_CORE help text watchdog: Fix POST failure on ASUS P5N32-E SLI and similar boards watchdog: shwdt: fix usage of mod_timer
-
