- 27 May, 2020 10 commits
-
-
Leon Romanovsky authored
IBTA declares "vendor option not supported" reject reason in REJ messages if passive side doesn't want to accept proposed ECE options. Due to the fact that ECE is managed by userspace, there is a need to let users to provide such rejected reason. Link: https://lore.kernel.org/r/20200526103304.196371-7-leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
The rdma_accept() is called by both passive and active sides of CMID connection to mark readiness to start data transfer. For passive side, this is called explicitly, for active side, it is called implicitly while receiving REP message. Provide ECE data to rdma_accept function needed for passive side to send that REP message. Link: https://lore.kernel.org/r/20200526103304.196371-6-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
ECE parameters are exchanged through REQ->REP/SIDR_REP messages, this patch adds the data to provide to other side of CMID communication channel. Link: https://lore.kernel.org/r/20200526103304.196371-5-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
Passive side of CMID connection receives ECE request through REQ message and needs to respond with relevant REP message which will be forwarded to active side. The UCMA events interface is responsible for such communication with the user space (librdmacm). Extend it to provide ECE wire data. Link: https://lore.kernel.org/r/20200526103304.196371-4-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
Active side of CMID initiates connection through librdmacm's rdma_connect() and kernel's ucma_connect(). Extend UCMA interface to handle those new parameters. Link: https://lore.kernel.org/r/20200526103304.196371-3-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
Extend REQ (request for communications), REP (reply to request for communication), rejected reason and SIDR_REP (service ID resolution response) structures with hardware vendor ID bits according to IBTA v1.4. Link: https://lore.kernel.org/r/20200526103304.196371-2-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
From the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Required for dependencies in following patches * branch 'mellanox/mlx5-next': net/mlx5: Add ability to read and write ECE options net/mlx5: Add support for RDMA TX FT headers modifying net/mlx5: Move iseg access helper routines close to mlx5_core driver net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits Signed-off-by:
-
Mark Zhang authored
The commit citied in the Fixes line wasn't complete and solved only part of the problems. Update the mlx5_ib to properly support MLX5_CMD_OP_INIT2INIT_QP command in the DEVX, that is required when modify the QP tx_port_affinity. Fixes: 819f7427 ("RDMA/mlx5: Add init2init as a modify command") Link: https://lore.kernel.org/r/20200527135703.482501-1-leon@kernel.orgSigned-off-by:
Mark Zhang <markz@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the sizeof_field() helper instead of an open-coded version. Link: https://lore.kernel.org/r/20200527144152.GA22605@embeddedorSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Leon Romanovsky authored
The end result of RDMA-CM ECE handshake is ECE options, which is needed to be used while configuring data QPs. Such options can come in any QP state, so add in/out fields to set and query ECE options. OUT fields: * create_qp() - default ECE options for that type of QP. * modify_qp() - enabled ECE options after QP state transition. IN fields: * create_qp() - create QP with this ECE option. * modify_qp() - requested options. For unconnected QPs, the FW will return an error if ECE is already configured with any options that not equal to previously set. Reviewed-by:
-
- 25 May, 2020 15 commits
-
-
Kamal Heib authored
can_sleep is always 0 when iboib_mcast_alloc() is called, so remove it and use GFP_ATOMIC instead of GFP_KERNEL. Link: https://lore.kernel.org/r/20200525130305.171509-1-kamalheib1@gmail.comSigned-off-by:
Kamal Heib <kamalheib1@gmail.com> Signed-off-by:
-
Potnuri Bharat Teja authored
Remove device specific debugfs entries immediately if LLD detaches a particular ULD device in case of fatal PCI errors. Link: https://lore.kernel.org/r/20200524190814.17599-1-bharat@chelsio.comSigned-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
Yixian Liu authored
Instead of i with the sge number of wr will make the comparision more clear, that is, when the sge number in wr is small than the maximum supported sge number in the queue, then a stop sge needed to be filled at the end of sges in wr. Link: https://lore.kernel.org/r/1590152579-32364-5-git-send-email-liweihang@huawei.comSigned-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
-
Lang Cheng authored
Set hns_roce_v2_cq_set_ci to inline type and remove unnecessary next_cqe_sw_v2(). Link: https://lore.kernel.org/r/1590152579-32364-4-git-send-email-liweihang@huawei.comSigned-off-by:
Lang Cheng <chenglang@huawei.com> Signed-off-by:
-
Wenpeng Liang authored
The redundant parameters "hr_dev" need to be removed from free_kernel_wrid() and free_srq_wrid(). Link: https://lore.kernel.org/r/1590152579-32364-3-git-send-email-liweihang@huawei.comSigned-off-by:
Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by:
-
Weihang Li authored
There is no need to do a type cast on genernal pointers, they could be assigned to any type of variables. In addition, optimize initialization of some variables and adjust order of them. Link: https://lore.kernel.org/r/1590152579-32364-2-git-send-email-liweihang@huawei.comSigned-off-by:
-
Xi Wang authored
Currently, the MTR region is configed before hns_roce_mtr_map() is invoked, but in some scenarios, the region is configed at MTR creation, the caller need to store this config and call hns_roce_mtr_map() later. So optimize the usage by wrapping the MTR region config into MTR. Link: https://lore.kernel.org/r/1589982799-28728-10-git-send-email-liweihang@huawei.comSigned-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
-
Xi Wang authored
Split the code related to WQE buffer configure from the QPC filling process into two functions: config_qp_sq_buf() and config_qp_rq_buf(), this will make the code more readable. Link: https://lore.kernel.org/r/1589982799-28728-9-git-send-email-liweihang@huawei.comSigned-off-by:
-
Weihang Li authored
Number of sge/eqe is always non-negative, they should be defined in type of unsigned. Link: https://lore.kernel.org/r/1589982799-28728-8-git-send-email-liweihang@huawei.comSigned-off-by:
-
Weihang Li authored
page_shift is used to calculate the page size, it's always non-negative, and should be in type of unsigned. Link: https://lore.kernel.org/r/1589982799-28728-7-git-send-email-liweihang@huawei.comSigned-off-by:
-
Xi Wang authored
Rename the function related to QP buffer to make the code more readable. Link: https://lore.kernel.org/r/1589982799-28728-6-git-send-email-liweihang@huawei.comSigned-off-by:
-
Yangyang Li authored
The codes related to assert are no longer used and need to be deleted. Link: https://lore.kernel.org/r/1589982799-28728-5-git-send-email-liweihang@huawei.comSigned-off-by:
Yangyang Li <liyangyang20@huawei.com> Signed-off-by:
-
Lang Cheng authored
Add unlikely() and likely() to optimize main I/O process code. Link: https://lore.kernel.org/r/1589982799-28728-4-git-send-email-liweihang@huawei.comSigned-off-by:
-
Lang Cheng authored
It's easier to understand and maintain enable flags of cq using a single field in type of u32 than defining a field for every flags in the structure hns_roce_cq, and we can add new flags for features more conveniently in the future. Link: https://lore.kernel.org/r/1589982799-28728-3-git-send-email-liweihang@huawei.comSigned-off-by:
-
Lang Cheng authored
The hardware can truncate PI/CI when posting or polling, the driver does not need to do truncation. Therefore keep the software's PI/CI consistent with it in the hardware. Link: https://lore.kernel.org/r/1589982799-28728-2-git-send-email-liweihang@huawei.comSigned-off-by:
-
- 22 May, 2020 5 commits
-
-
Danil Kipnis authored
The macros do_each_path/while_each_path lead to a smatch warning: drivers/infiniband/ulp/rtrs/rtrs-clt.c:1196 rtrs_clt_failover_req() warn: inconsistent indenting drivers/infiniband/ulp/rtrs/rtrs-clt.c:2890 rtrs_clt_request() warn: inconsistent indenting Also checkpatch complains: ERROR: Macros with multiple statements should be enclosed in a do - while loop The macros are used only in two places: for a normal IO path and for the failover path triggered after errors. Get rid of the macros and just use a for loop iterating over the list of paths in both places. It is easier to read and also less lines of code. Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20200522053924.528980-1-danil.kipnis@cloud.ionos.comReported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by:
-
Md Haris Iqbal authored
The rtrs_sess structure has already been extracted above from the rtrs_srv_sess structure. Use that to avoid redundant dereferencing. Fixes: 9cb83748 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20200522082833.1480551-1-haris.phnx@gmail.comSigned-off-by:
Md Haris Iqbal <haris.phnx@gmail.com> Acked-by:
-
Danil Kipnis authored
module_is_live function is only defined when CONFIG_MODULES is enabled. Use try_module_get instead to check whether the module is being removed. When module unload and manuall unmapping is happening in parallel, we can try removing the symlink twice: rnbd_client_exit vs. rnbd_clt_unmap_dev_store. This is probably not the best way to deal with this race in general, but for now this fixes the compilation issue when CONFIG_MODULES is disabled and has no functional impact. Regression tests passed. Fixes: 1eb54f8f ("block/rnbd: client: sysfs interface functions") Link: https://lore.kernel.org/r/20200521185909.457245-1-danil.kipnis@cloud.ionos.comReported-by:
Randy Dunlap <rdunlap@infradead.org> Suggested-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
-
Maor Gottlieb authored
The allocated ports structure in never freed. The free function should be called by release_cma_ports_group, but the group is never released since we don't remove its default group. Remove default groups when device group is deleted. Fixes: 045959db ("IB/cma: Add configfs for rdma_cm") Link: https://lore.kernel.org/r/20200521072650.567908-1-leon@kernel.orgSigned-off-by:
-
Dan Carpenter authored
The alloc_sess() function returns error pointers, it never returns NULL. Fixes: f7a7a5c2 ("block/rnbd: client: main functionality") Link: https://lore.kernel.org/r/20200519120347.GD42765@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
- 21 May, 2020 10 commits
-
-
Yishai Hadas authored
Introduce create/destroy QP commands over the ioctl interface to let it be extended to get an asynchronous event FD. Link: https://lore.kernel.org/r/20200519072711.257271-8-leon@kernel.orgSigned-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Introduce create/destroy WQ commands over the ioctl interface to let it be extended to get an asynchronous event FD. Link: https://lore.kernel.org/r/20200519072711.257271-7-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Introduce create/destroy SRQ commands over the ioctl interface to let it be extended to get an asynchronous event FD. Link: https://lore.kernel.org/r/20200519072711.257271-6-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
These constants are going to be used in the ioctl interface in coming patches so they are part of the UAPI, place them in the correct header for clarity. Link: https://lore.kernel.org/r/20200519072711.257271-5-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Extend CQ to get its own asynchronous event FD. The event FD is an optional attribute, in case wasn't given the ufile event FD will be used. Link: https://lore.kernel.org/r/20200519072711.257271-4-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Refactor related objects to use their own asynchronous event FD. The ufile event FD will be the default in case an object won't have its own event FD. Link: https://lore.kernel.org/r/20200519072711.257271-3-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
While creating a uobject every create reaches a point where the uobject is fully initialized. For ioctls that go on to copy_to_user this means they need to open code the destruction of a fully created uobject - ie the RDMA_REMOVE_DESTROY sort of flow. Open coding this creates bugs, eg the CQ does not properly flush the events list when it does its error unwind. Provide a uverbs_finalize_uobj_create() function which indicates that the uobject is fully initialized and that abort should call to destroy_hw to destroy the uobj->object and related. Methods can call this function if they go on to have error cases after setting uobj->object. Once done those error cases can simply do return, without an error unwind. Link: https://lore.kernel.org/r/20200519072711.257271-2-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
Linux 5.7-rc6 Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c resolved by deleting dr_cq_event, matching how netdev resolved it. Required for dependencies in the following patches. Signed-off-by: -
Piotr Stankiewicz authored
This patch hooks the transmit side of the datagram netdev with ipoib by setting the rdma_netdev_get_params function for the hfi1 ib_device_ops structue. It also enables the receiving side by adding the AIP capability into the default capabilities. Link: https://lore.kernel.org/r/20200511160712.173205.65700.stgit@awfm-01.aw.intel.comReviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Piotr Stankiewicz <piotr.stankiewicz@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Gary Leshner authored
This is the prerequisite modification to the ipoib ulp to allow a rdma netdev to obtain the default ndo ops for init/uninit/open/close. This is accomplished by setting the netdev ops field within the callback function passed to the netdev allocation routine which in turn was passed into the rdma netdev allocation routine. This allows the rdma netdev to call back into the ulp to create the resources required for connected mode operation. Additionally as the ulp is not re-entrant, when switching modes, the number of real tx queues is set to 1 for the connected mode. For datagram mode the number of real tx queues is set to the actual number of tx queues specified at the netdev's allocation. For the internal ulp netdev the number of tx queues defaults to 1. It is up to the rdma netdev to specify the actual number it can support. When the driver does not support a rdma netdev for acceleration, (-ENOTSUPPORTED return code or the verbs function for allocation is NULL) the ipoib ulp functions are unaffected by using the internal netdev allocated by the ipoib ulp. Link: https://lore.kernel.org/r/20200511160706.173205.19086.stgit@awfm-01.aw.intel.comReviewed-by:
Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by:
-
