- 03 Sep, 2014 23 commits
-
-
Guenter Roeck authored
commit 1074d683 upstream. On platforms with sizeof(int) < sizeof(long), writing a temperature limit larger than MAXINT will result in unpredictable limit values written to the chip. Avoid auto-conversion from long to int to fix the problem. Cc: Axel Lin <axel.lin@ingics.com> Reviewed-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Axel Lin authored
commit cf44819c upstream. Ensure mutex lock protects the read-modify-write period to prevent possible race condition bug. In additional, update data->valid should also be protected by the mutex lock. Signed-off-by:
-
Axel Lin authored
commit cc336546 upstream. On platforms with sizeof(int) < sizeof(long), writing a temperature limit larger than MAXINT will result in unpredictable limit values written to the chip. Avoid auto-conversion from long to int to fix the problem. Signed-off-by:
-
Russell King authored
commit 2d31ca3a upstream. Regular randconfig nightly testing has detected problems with omapdrm. omapdrm fails to build when the kernel is built to support 64-bit DMA addresses and/or 64-bit physical addresses due to an assumption about the width of these types. Use %pad to print DMA addresses, rather than %x or %Zx (which is even more wrong than %x). Avoid passing a uint32_t pointer into a function which expects dma_addr_t pointer. drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_plane.o] Error 1 drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_get_paddr': drivers/gpu/drm/omapdrm/omap_gem.c:794:4: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_describe': drivers/gpu/drm/omapdrm/omap_gem.c:991:4: error: format '%Zx' expects argument of type 'size_t', but argument 7 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_init': drivers/gpu/drm/omapdrm/omap_gem.c:1470:4: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_gem.o] Error 1 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c: In function 'dmm_txn_append': drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:226:2: error: passing argument 3 of 'alloc_dma' from incompatible pointer type [-Werror] make[5]: *** [drivers/gpu/drm/omapdrm/omap_dmm_tiler.o] Error 1 make[5]: Target `__build' not remade because of errors. make[4]: *** [drivers/gpu/drm/omapdrm] Error 2 Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Jeremy Vial authored
commit 9b5f7428 upstream. According to the comment “restore_es3: applies to 34xx >= ES3.0" in "arch/arm/mach-omap2/sleep34xx.S”, omap3_restore_es3 should be used if the revision of an OMAP34xx is ES3.1.2. Signed-off-by:
Jeremy Vial <jvial@adeneo-embedded.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Alexander Usyskin authored
commit 22b987a3 upstream. Link must be reset in case the fw doesn't respond to client disconnect request. We did charge the timer only in irq path from mei_cl_irq_close and not in mei_cl_disconnect Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit f3ee07d8 upstream. ALC269 & co have many vendor-specific setups with COEF verbs. However, some verbs seem specific to some codec versions and they result in the codec stalling. Typically, such a case can be avoided by checking the return value from reading a COEF. If the return value is -1, it implies that the COEF is invalid, thus it shouldn't be written. This patch adds the invalid COEF checks in appropriate places accessing ALC269 and its variants. The patch actually fixes the resume problem on Acer AO725 laptop. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181Tested-by:
Francesco Muzio <muziofg@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
commit f475371a upstream. On some HP laptops, the mute led is controlled by codec gpio. When some machine resume from s3/s4, the codec gpio data will be cleared to 0 by BIOS: Before suspend: IO[3]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0 After resume: IO[3]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0 To skip the AFG node to enter D3 can't fix this problem. A workaround is to restore the gpio data when the system resume back from s3/s4. It is safe even on the machines without this problem. BugLink: https://bugs.launchpad.net/bugs/1358116Tested-by:
Franz Hsieh <franz.hsieh@canonical.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Clemens Ladisch authored
commit 53da5ebf upstream. The BOSS ME-25 turns out not to have any useful descriptors in its MIDI interface, so its needs a quirk entry after all. Reported-and-tested-by:
Kees van Veen <kees.vanveen@gmail.com> Fixes: 8e5ced83 ("ALSA: usb-audio: remove superfluous Roland quirks") Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Takashi Iwai authored
commit e24aa0a4 upstream. CA0132 driver tries to reload the firmware at resume. Usually this works since the firmware loader core caches the firmware contents by itself. However, if the driver failed to load the firmwares (e.g. missing files), reloading the firmware at resume goes through the actual file loading code path, and triggers a kernel WARNING like: WARNING: CPU: 10 PID:11371 at drivers/base/firmware_class.c:1105 _request_firmware+0x9ab/0x9d0() For avoiding this situation, this patch makes CA0132 skipping the f/w loading at resume when it failed at probe time. Reported-and-tested-by:
Janek Kozicki <cosurgi@gmail.com> Signed-off-by:
-
Clemens Ladisch authored
commit f42bb222 upstream. Just add the PCI ID for the STX II. It appears to work the same as the STX, except for the addition of the not-yet-supported daughterboard. Tested-by:
Mario <fugazzi99@gmail.com> Tested-by:
corubba <corubba@gmx.de> Signed-off-by:
-
Hui Wang authored
commit 7440850c upstream. ON the machine, two pin complex (0xb and 0xe) are both routed to the same external right-side mic jack, this makes the jack can't work. To fix this problem, set the 0xe to "not connected". BugLink: https://bugs.launchpad.net/bugs/1350148Tested-by:
-
Pratyush Anand authored
commit a40178b2 upstream. Problem Summary: Problem has been observed generally with PM states where VBUS goes off during suspend. There are some SS USB devices which take longer time for link training compared to many others. Such devices fail to reconnect with same old address which was associated with it before suspend. When system resumes, at some point of time (dpm_run_callback-> usb_dev_resume->usb_resume->usb_resume_both->usb_resume_device-> usb_port_resume) SW reads hub status. If device is present, then it finishes port resume and re-enumerates device with same address. If device is not present then, SW thinks that device was removed during suspend and therefore does logical disconnection and removes all the resource allocated for this device. Now, if I put sufficient delay just before root hub status read in usb_resume_device then, SW sees always that device is present. In normal course(without any delay) SW sees that no device is present and then SW removes all resource associated with the device at this port. In the latter case, after sometime, device says that hey I am here, now host enumerates it, but with new address. Problem had been reproduced when I connect verbatim USB3.0 hard disc with my STiH407 XHCI host running with 3.10 kernel. I see that similar problem has been reported here. https://bugzilla.kernel.org/show_bug.cgi?id=53211 Reading above it seems that bug was not in 3.6.6 and was present in 3.8 and again it was not present for some in 3.12.6, while it was present for few others. I tested with 3.13-FC19 running at i686 desktop, problem was still there. However, I was failed to reproduce it with 3.16-RC4 running at same i686 machine. I would say it is just a random observation. Problem for few devices is always there, as I am unable to find a proper fix for the issue. So, now question is what should be the amount of delay so that host is always able to recognize suspended device after resume. XHCI specs 4.19.4 says that when Link training is successful, port sets CSC bit to 1. So if SW reads port status before successful link training, then it will not find device to be present. USB Analyzer log with such buggy devices show that in some cases device switch on the RX termination after long delay of host enabling the VBUS. In few other cases it has been seen that device fails to negotiate link training in first attempt. It has been reported till now that few devices take as long as 2000 ms to train the link after host enabling its VBUS and RX termination. This patch implements a 2000 ms timeout for CSC bit to set ie for link training. If in a case link trains before timeout, loop will exit earlier. This patch implements above delay, but only for SS device and when persist is enabled. So, for the good device overhead is almost none. While for the bad devices penalty could be the time which it take for link training. But, If a device was connected before suspend, and was removed while system was asleep, then the penalty would be the timeout ie 2000 ms. Results: Verbatim USB SS hard disk connected with STiH407 USB host running 3.10 Kernel resumes in 461 msecs without this patch, but hard disk is assigned a new device address. Same system resumes in 790 msecs with this patch, but with old device address. Signed-off-by:
Pratyush Anand <pratyush.anand@st.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Bryan O'Donoghue authored
commit 6e693739 upstream. The EHCI packet buffer in/out threshold is programmable for Intel Quark X1000 USB host controller, and the default value is 0x20 dwords. The in/out threshold can be programmed to 0x80 dwords (512 Bytes) to maximize the perfomrance, but only when isochronous/interrupt transactions are not initiated by the USB host controller. This patch is to reconfigure the packet buffer in/out threshold as maximal as possible to maximize the performance, and 0x7F dwords (508 Bytes) should be used because the USB host controller initiates isochronous/interrupt transactions. Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@intel.com> Signed-off-by:
Alvin (Weike) Chen <alvin.chen@intel.com> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Patrick Riphagen authored
commit 4bdcde35 upstream. This adds support for new Xsens devices, using Xsens' own Vendor ID. Signed-off-by:
Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by:
Frans Klaver <frans.klaver@xsens.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
Patrick Riphagen authored
commit 9273b8a2 upstream. The converters are used in specific products. It can be useful to know which they are exactly. Signed-off-by:
-
Oliver Neukum authored
commit d310d05f upstream. usbfs allows user space to pass down an URB which sets URB_SHORT_NOT_OK for output URBs. That causes usbcore to log messages without limit for a nonsensical disallowed combination. The fix is to silently drop the attribute in usbfs. The problem is reported to exist since 3.14 https://www.virtualbox.org/ticket/13085Signed-off-by:
Oliver Neukum <oneukum@suse.de> Acked-by:
-
Alan Stern authored
commit 977dcfdc upstream. This patch fixes a bug in ohci-hcd. When an URB is unlinked, the corresponding Endpoint Descriptor is added to the ed_rm_list and taken off the hardware schedule. Once the ED is no longer visible to the hardware, finish_unlinks() handles the URBs that were unlinked or have completed. If any URBs remain attached to the ED, the ED is added back to the hardware schedule -- but only if the controller is running. This fails when a controller dies. A non-empty ED does not get added back to the hardware schedule and does not remain on the ed_rm_list; ohci-hcd loses track of it. The remaining URBs cannot be unlinked, which causes the USB stack to hang. The patch changes finish_unlinks() so that non-empty EDs remain on the ed_rm_list if the controller isn't running. This requires moving some of the existing code around, to avoid modifying the ED's hardware fields more than once. Signed-off-by:
-
Alan Stern authored
commit 256dbcd8 upstream. The debug routine fill_async_buffer() in ohci-hcd is buggy: It never produces any output because it forgets to initialize the output buffer size. Also, the debug routine ohci_dump() has an unused argument. This patch adds the correct initialization and removes the unused argument. Signed-off-by:
-
Jan Kara authored
commit 410dd3cf upstream. We did not check relocated directory in any way when processing Rock Ridge 'CL' tag. Thus a corrupted isofs image can possibly have a CL entry pointing to another CL entry leading to possibly unbounded recursion in kernel code and thus stack overflow or deadlocks (if there is a loop created from CL entries). Fix the problem by not allowing CL entry to point to a directory entry with CL entry (such use makes no good sense anyway) and by checking whether CL entry doesn't point to itself. Reported-by:
Chris Evans <cevans@google.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit 4ab25786 upstream. There are a few very theoretical off-by-one bugs in report descriptor size checking when performing a pre-parsing fixup. Fix those. Reported-by:
Ben Hawkes <hawkes@google.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit ad3e14d7 upstream. device_index is a char type and the size of paired_dj_deivces is 7 elements, therefore proper bounds checking has to be applied to device_index before it is used. We are currently performing the bounds checking in logi_dj_recv_add_djhid_device(), which is too late, as malicious device could send REPORT_TYPE_NOTIF_DEVICE_UNPAIRED early enough and trigger the problem in one of the report forwarding functions called from logi_dj_raw_event(). Fix this by performing the check at the earliest possible ocasion in logi_dj_raw_event(). Reported-by:
-
Bjorn Helgaas authored
commit c6bde215 upstream. This adds a pci_upstream_bridge() interface to find the PCI-to-PCI bridge upstream from a device. This is typically just "dev->bus->self", but in the case of a VF on a virtual bus, we have to start from the corresponding PF. Returns NULL if there is no upstream PCI bridge, i.e., if the device is on a root bus. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
- 02 Sep, 2014 9 commits
-
-
Gu Zheng authored
commit cbcd1054 upstream. Commit 08778795 ("block: Fix nr_vecs for inline integrity vectors") from Martin introduces the function bip_integrity_vecs(get the useful vectors) to fix the issue about nr_vecs for inline integrity vectors that reported by David Milburn. But it seems that bip_integrity_vecs() will return the wrong number if the bio is not based on any bio_set for some reason(bio->bi_pool == NULL), because in that case, the bip_inline_vecs[0] is malloced directly. So here we add the bip_max_vcnt to record the count of vector slots, and cleanup the function bip_integrity_vecs(). Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Lee, Chun-Yi authored
commit 84c91b7a upstream. When the machine doesn't well handle the e820 persistent when hibernate resuming, then it may cause page fault when writing image to snapshot buffer: [ 17.929495] BUG: unable to handle kernel paging request at ffff880069d4f000 [ 17.933469] IP: [<ffffffff810a1cf0>] load_image_lzo+0x810/0xe40 [ 17.933469] PGD 2194067 PUD 77ffff067 PMD 2197067 PTE 0 [ 17.933469] Oops: 0002 [#1] SMP ... The ffff880069d4f000 page is in e820 reserved region of resume boot kernel: [ 0.000000] BIOS-e820: [mem 0x0000000069d4f000-0x0000000069e12fff] reserved ... [ 0.000000] PM: Registered nosave memory: [mem 0x69d4f000-0x69e12fff] So snapshot.c mark the pfn to forbidden pages map. But, this page is also in the memory bitmap in snapshot image because it's an original page used by image kernel, so it will also mark as an unsafe(free) page in prepare_image(). That means the page in e820 when resuming mark as "forbidden" and "free", it causes get_buffer() treat it as an allocated unsafe page. Then snapshot_write_next() return this page to load_image, load_image writing content to this address, but this page didn't really allocated . So, we got page fault. Although the root cause is from BIOS, I think aggressive check and significant message in kernel will better then a page fault for issue tracking, especially when serial console unavailable. This patch adds code in mark_unsafe_pages() for check does free pages in nosave region. If so, then it print message and return fault to stop whole S4 resume process: [ 8.166004] PM: Image loading progress: 0% [ 8.658717] PM: 0x6796c000 in e820 nosave region: [mem 0x6796c000-0x6796cfff] [ 8.918737] PM: Read 2511940 kbytes in 1.04 seconds (2415.32 MB/s) [ 8.926633] PM: Error -14 resuming [ 8.933534] PM: Failed to load hibernation image, recovering. Reviewed-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> [rjw: Subject] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Wangzhao Cai authored
commit 30c6fd42 upstream. I am using a USB keyborad that give me "usb_submit_urb(ctrl) failed: -1" error when I plugin it. and I need to wait for 10s for this device to be ready. By adding this quirks, the usb keyborad is usable right after plugin Signed-off-by:
Wangzhao Cai <microcaicai@gmail.com> Signed-off-by:
-
Jiang Liu authored
commit c5946f9d upstream. The assigned IRQ should be freed before calling pci_disable_device() when shutting down system, otherwise it will cause following warning. [ 568.879482] ------------[ cut here ]------------ [ 568.884236] WARNING: CPU: 1 PID: 3300 at /home/konrad/ssd/konrad/xtt-i386/bootstrap/linux-usb/fs/proc/generic.c:521 remove_proc_entry+0x165/0x170() [ 568.897846] remove_proc_entry: removing non-empty directory 'irq/16', leaking at least 'ohci_hcd:usb4' [ 568.907430] Modules linked in: dm_multipath dm_mod iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c_generic sg sd_mod crct10dif_generic crc_t10dif crct10dif_common radeon fbcon tileblit ttm font bitblit softcursor ata_generic ahci libahci drm_kms_helper skge r8169 libata mii scsi_mod wmi acpi_cpufreq [ 568.938539] CPU: 1 PID: 3300 Comm: init Tainted: G W 3.16.0-rc5upstream-01651-g03b9189 #1 [ 568.947946] Hardware name: ECS A780GM-A Ultra/A780GM-A Ultra, BIOS 080015 04/01/2010 [ 568.956008] 00000209 ed0f1cd0 c1617946 c175403c ed0f1d00 c1090c3f c1754084 ed0f1d2c [ 568.964068] 00000ce4 c175403c 00000209 c11f22a5 c11f22a5 f755e8c0 ed0f1d78 f755e90d [ 568.972128] ed0f1d18 c1090cde 00000009 ed0f1d10 c1754084 ed0f1d2c ed0f1d60 c11f22a5 [ 568.980194] Call Trace: [ 568.982715] [<c1617946>] dump_stack+0x48/0x60 [ 568.987294] [<c1090c3f>] warn_slowpath_common+0x7f/0xa0 [ 569.003887] [<c1090cde>] warn_slowpath_fmt+0x2e/0x30 [ 569.009092] [<c11f22a5>] remove_proc_entry+0x165/0x170 [ 569.014476] [<c10da6ca>] unregister_irq_proc+0xaa/0xc0 [ 569.019858] [<c10d582f>] free_desc+0x1f/0x60 [ 569.024346] [<c10d58aa>] irq_free_descs+0x3a/0x80 [ 569.029283] [<c10d9e9d>] irq_dispose_mapping+0x2d/0x50 [ 569.034666] [<c1078fd3>] mp_unmap_irq+0x73/0xa0 [ 569.039423] [<c107196b>] acpi_unregister_gsi_ioapic+0x2b/0x40 [ 569.045431] [<c107180f>] acpi_unregister_gsi+0xf/0x20 [ 569.050725] [<c1339cad>] acpi_pci_irq_disable+0x4b/0x50 [ 569.056196] [<c14daa38>] pcibios_disable_device+0x18/0x20 [ 569.061848] [<c130123d>] do_pci_disable_device+0x4d/0x60 [ 569.067410] [<c13012b7>] pci_disable_device+0x47/0xb0 [ 569.077814] [<c14800b1>] usb_hcd_pci_shutdown+0x31/0x40 [ 569.083285] [<c1304b19>] pci_device_shutdown+0x19/0x50 [ 569.088667] [<c13fda64>] device_shutdown+0x14/0x120 [ 569.093777] [<c10ac29d>] kernel_restart_prepare+0x2d/0x30 [ 569.099429] [<c10ac41e>] kernel_restart+0xe/0x60 [ 569.109028] [<c10ac611>] SYSC_reboot+0x191/0x220 [ 569.159269] [<c10ac6ba>] SyS_reboot+0x1a/0x20 [ 569.163843] [<c161c718>] sysenter_do_call+0x12/0x16 [ 569.168951] ---[ end trace ccc1ec4471c289c9 ]--- Tested-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
James P Michels III authored
commit cd83ce9e upstream. This patch adds a usb quirk to support devices with interupt endpoints and bInterval values expressed as microframes. The quirk causes the parse endpoint function to modify the reported bInterval to a standards conforming value. There is currently code in the endpoint parser that checks for bIntervals that are outside of the valid range (1-16 for USB 2+ high speed and super speed interupt endpoints). In this case, the code assumes the bInterval is being reported in 1ms frames. As well, the correction is only applied if the original bInterval value is out of the 1-16 range. With this quirk applied to the device, the bInterval will be accurately adjusted from microframes to an exponent. Signed-off-by:
James P Michels III <james.p.michels@gmail.com> Signed-off-by:
-
Joonyoung Shim authored
commit 526a4045 upstream. The usb device will autoresume from choose_wakeup() if it is autosuspended with the wrong wakeup setting, but below errors occur because usb3503 misc driver will switch to standby mode when suspended. As add USB_QUIRK_RESET_RESUME, it can stop setting wrong wakeup from autosuspend_check(). [ 7.734717] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 7.854658] usb 1-3: device descriptor read/64, error -71 [ 8.079657] usb 1-3: device descriptor read/64, error -71 [ 8.294664] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 8.414658] usb 1-3: device descriptor read/64, error -71 [ 8.639657] usb 1-3: device descriptor read/64, error -71 [ 8.854667] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 9.264598] usb 1-3: device not accepting address 3, error -71 [ 9.374655] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 9.784601] usb 1-3: device not accepting address 3, error -71 [ 9.784838] usb usb1-port3: device 1-3 not suspended yet Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Preston Fick authored
commit 934ef5ac upstream. This `usb_reset_device` command has been around since the driver was originally reverse engineered. It doesn't cause much issue on single interface CP210x devices, but on the CP2105 and CP2108 with 2 and 4 interfaces respectively it will cause instability on enumeration and delays enumeration noticably. There should be no reason to reset a device at startup, per the CP210x AN571 spec. Signed-off-by:
Preston Fick <preston.fick@silabs.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
Daniel Mack authored
commit 50aea6fc upstream. The musb/cppi41 code installs a hrtimer to work around DMA completion interrupts that have fired too early on AM335x hardware. This timer is currently programmed to first fire 140 microseconds after the DMA completion callback. According to the commit which introduced it (a655f481, "usb: musb: musb_cppi41: handle pre-mature TX complete interrupt"), that value is is considered a 'rule of thumb' that worked well with the test case described in the commit log. Test show, however, that for USB audio devices and much smaller packet sizes, the timer has to fire earlier in order to correctly handle the audio stream. The original test case had output transfer sizes of 1514 bytes, and a delay of 140 microseconds. For audio devices with 24 bytes channel size, 3 microseconds seem to work well. Hence, let's assume that the time it takes to clear the bit correlates with the number of bytes transferred. The referenced commit log mentions such a suspicion as well. Let the timer fire in cppi41_channel->total_len/10 microseconds to correctly handle both cases. Also, shorten the interval in which the timer fires again in case of a non-empty early_tx list. With these changes in place, both FS and HS audio devices appear to work well on AM335x hardware. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Kent Overstreet authored
commit b3fa7e77 upstream. The real fix is where we check the bytes we need against how much is remaining - we also need to check for a journal entry bigger than our buffer, we'll never write those and it would be bad if we tried to read one. Also improve the diagnostic messages. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Signed-off-by:
-
- 26 Aug, 2014 8 commits
-
-
Jiri Slaby authored
-
Ales Novak authored
commit ee1d9014 upstream. In __rtc_read_alarm(), if the alarm time retrieved by rtc_read_alarm_internal() from the device contains invalid values (e.g. month=2,mday=31) and the year not set (=-1), the initialization will loop infinitely because the year-fixing loop expects the time being invalid due to leap year. Fix reduces the loop to the leap years and adds final validity check. Signed-off-by:
Ales Novak <alnovak@suse.cz> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Reported-by:
Jiri Bohac <jbohac@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Beulich authored
commit 6e85bab6 upstream. In particular seeing zero in eft->month is problematic, as it results in -1 (converted to unsigned int, i.e. yielding 0xffffffff) getting passed to rtc_year_days(), where the value gets used as an array index (normally resulting in a crash). This was observed with the driver enabled on x86 on some Fujitsu system (with possibly not up to date firmware, but anyway). Perhaps efi_read_alarm() should not fail if neither enabled nor pending are set, but the returned time is invalid? Signed-off-by:
Jan Beulich <jbeulich@suse.com> Reported-by:
Raymund Will <rw@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by:
-
Lee, Chun-Yi authored
commit 809d9627 upstream. Compared source code of rtc-lib.c::rtc_year_days() with efirtc.c::rtc_year_days(), found the code in rtc-efi decreases value of day twice when it computing year days. rtc-lib.c::rtc_year_days() has already decrease days and return the year days from 0 to 365. Signed-off-by:
-
Vitaliy Kulikov authored
commit d009f3de upstream. Adds linear EQ filtering for integrated speaker protection Signed-off-by:
Vitaliy Kulikov <vitaliy.kulikov@idt.com> Signed-off-by:
-
Benjamin Tisssoires authored
commit 42c22dbf upstream. This fix (not very clean though) should fix the long time USB3 issue that was spotted last year. The rational has been given by Hans de Goede: ---- I think the most likely cause for this is a firmware bug in the unifying receiver, likely a race condition. The most prominent difference between having a USB-2 device plugged into an EHCI (so USB-2 only) port versus an XHCI port will be inter packet timing. Specifically if you send packets (ie hid reports) one at a time, then with the EHCI controller their will be a significant pause between them, where with XHCI they will be very close together in time. The reason for this is the difference in EHCI / XHCI controller OS <-> driver interfaces. For non periodic endpoints (control, bulk) the EHCI uses a circular linked-list of commands in dma-memory, which it follows to execute commands, if the list is empty, it will go into an idle state and re-check periodically. The XHCI uses a ring of commands per endpoint, and if the OS places anything new on the ring it will do an ioport write, waking up the XHCI making it send the new packet immediately. For periodic transfers (isoc, interrupt) the delay between packets when sending one at a time (rather then queuing them up) will be even larger, because they need to be inserted into the EHCI schedule 2 ms in the future so the OS driver can be sure that the EHCI driver does not try to start executing the time slot in question before the insertion has completed. So a possible fix may be to insert a delay between packets being send to the receiver. ---- I tested this on a buggy Haswell USB 3.0 motherboard, and I always get the notification after adding the msleep. Signed-off-by:
-
Jiri Kosina authored
commit 8c947e20 upstream. Acer Aspire needs to be added to nomux blacklist, otherwise the touchpad misbehaves rather randomly. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Laurent Dufour authored
commit 761ce533 upstream. Numerical values stored in the device tree are encoded in Big Endian and should be byte swapped when running in Little Endian. The RPA hotplug module should convert those values as well. Note that in rpaphp_get_drc_props(), the comparison between indexes[i+1] and *index is done using the BE values (whatever is the current endianess). This doesn't matter since we are checking for equality here. This way only the returned value is byte swapped. RPA also made RTAS calls which implies BE values to be used. According to the patch done in RTAS (http://patchwork.ozlabs.org/patch/336865), no additional conversion is required in RPA. Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
-
